5 products
Fallkniven F1pro10 Pilot Survival Knife
Regular price €268,00 EUR Save €-268,00 EURFallkniven F1pro10 Pilot Survival Knife
- Made by Fällkniven -
Introduction:
There are basic survival knives, and there are survival knives for the professional. Our original models of the F1, S1 and A1 have provided exceptional service for more than 20 years. And due to their outstanding quality and durability they will continue to perform for many more years. Nevertheless our drive to continually improve our knives has led us to develop the new Pro Series. The Pro Series are survival knives of near-unimaginable quality, durability and performance.
Simply put, a knife is a blade and a handle. To remain strong and stay sharp the knife must be made of high quality materials. But if the claim is made that a knife is “professional” then the knife and its builder has a responsibility to the user to raise the bar far above what is common. The Pro Series truly is professional.
Compared to their predecessors, the Pro series of F1, S1 and A1 differs in the following important areas:
Understandably these knives fall into a higher price category. However, considering the unparalleled quality they are by no means over priced.
A professional survival knife must perform in all weather with no exceptions. The professional survival knife must be comfortable and safe to handle for both fine and rough work in summer heat and winter cold. We at Fallkniven have considered every design aspect of these superb professional survival knifes and we stand behind them with a lifetime warranty on materials and workmanship.
Specifications:
Steel: Laminated CoS HRC 60
Blade length: 3.94" inch / 100 mm
Total length: 8.54” inch / 217 mm
Handle length: 4.615” inch / 117 mm
Handle scales: Thermorun
Blade thickness: 5 mm
Knife weight 182 gr.
Additional Information:
Edge: Convex
Sheath Included: Zytel
Handle: Lanyard Hole
Tang: Protruding Broad Tang
Blade Finish: Satin
Laminated CoS: A newly developed high alloy cobalt-special steel
Fallkniven S1pro Survival Knife
Regular price €269,00 EUR Save €-269,00 EURFallkniven S1pro Survival Knife
- Made by Fällkniven -
Introduction:
S1pro – Laminated CoS steel
There are basic survival knives, and there are survival knives for the professional. Our original models of the F1, S1 and A1 have provided exceptional service for more than 20 years. And due to their outstanding quality and durability they will continue to perform for many more years. Nevertheless our drive to continually improve our knives has led us to develop the new Pro Series. The Pro Series are survival knives of near-unimaginable quality, durability and performance.
We began developing the Pro Series knives back in 2010 and finally five years later, we could offer three amazing Pro Series survival knives that are the new world standard for survival knife performance and manufacturing.
Simply put, a knife is a blade and a handle. To remain strong and stay sharp the knife must be made of high quality materials. But if the claim is made that a knife is “professional” then the knife and its builder has a responsibility to the user to raise the bar far above what is common. The Pro Series truly is professional.
Compared to their predecessors, the Pro series of F1, S1 and A1 differs in the following important areas:
Understandably these knives fall into a higher price category. However, considering the unparalleled quality they are by no means over priced.
A professional survival knife must perform in all weather with no exceptions. The professional survival knife must be comfortable and safe to handle for both fine and rough work in summer heat and winter cold. We at Fallkniven have considered every design aspect of these superb professional survival knifes.
Specifications:
Steel: Laminated Cobalt Steel HRC 60
Blade length: 5.12" inch / 130 mm
Total length: 9.72” inch / 247 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun
Blade thickness: 6 mm
Knife weight 257 gr.
Additional Information:
Edge: Convex
Sheath Included: Zytel
Handle: Lanyard Hole
Tang: Protruding Broad Tang
Finger Guard: Stainless Steel
Blade: Satin Finish
Laminated CoS: A newly developed high alloy cobalt-special steel
Fallkniven S1pro10 Survival Knife
Regular price €339,00 EUR Save €-339,00 EURFallkniven S1pro10 Survival Knife
- Made by Fällkniven -
Introduction:
This is the standard edition of the S1pro. Only knife, Zytel sheath and our regular 10 year warranty. There are basic survival knives, and there are survival knives for the professional. Our original models of the F1, S1 and A1 have provided exceptional service for more than 20 years. And due to their outstanding quality and durability they will continue to perform for many more years. Nevertheless our drive to continually improve our knives has led us to develop the new Pro Series. The Pro Series are survival knives of near-unimaginable quality, durability and performance. We began developing the Pro Series knives back in 2010 and finally five years later, we could offer three amazing Pro Series survival knives that are the new world standard for survival knife performance and manufacturing. Simply put, a knife is a blade and a handle. To remain strong and stay sharp the knife must be made of high quality materials. But if the claim is made that a knife is “professional” then the knife and its builder has a responsibility to the user to raise the bar far above what is common. The Pro Series truly is professional.
Compared to their predecessors, the Pro series of F1, S1 and A1 differs in the following important areas:
Understandably these knives fall into a higher price category. However, considering the unparalleled quality they are by no means over priced. A professional survival knife must perform in all weather with no exceptions. The professional survival knife must be comfortable and safe to handle for both fine and rough work in summer heat and winter cold. At Fallkniven we have considered every design aspect of these superb professional survival knives.
Specifications:
Steel: Laminated CoS HRC 60
Blade length: 5.12" inch / 130 mm
Total length: 9.72” inch / 247 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun
Blade thickness: 6 mm
Knife weight 257 gr.
Blade thickness: 6 mm
Knife weight 257 gr.
Additional Information:
Edge: Convex
Sheath Included: Zytel
Handle: Lanyard Hole
Tang: Protruding Broad Tang
Finger Guard: Stainless Steel
Blade: Satin Finish
Laminated CoS: A newly developed high alloy cobalt-special steel
Fallkniven Tungsten Carbine S1xb Knife
Regular price €269,00 EUR Save €-269,00 EURFallkniven Tungsten Carbine S1xb Knife
- Made by Fällkniven -
Introduction:
Your X-knife is the strongest, sharpest and safest stainless steel knife in production. If your life is in danger, you can always rely on your X-knife. It is designed to withstand all the stresses applied by the human hand, which means that it is virtually indestructible. It assumes, however, that you are careful with the knife and that it is used as intended, namely as a sharp precision tool. A few words about the all-black version: This surface is the hardest we have ever encountered. Although we really tried to wear down the black coating with the toughest, driest curly birch we could find, we never succeeded in getting holes in this extremely hard, durable surface. Still, we cannot guarantee that it will stay for time and eternity, after all, the blade can be ground and certainly a diamond or ceramic stone will bite on the surface.
Also for example a grain of sand can scratch or leave a mark in the coating. The hardness is at 2400 HV (Vickers) or around HRC 83. They have put a lot of energy into designing a safe knife sheath, which is actually where the knife will spend most of its time. The design of the sheath determines the access to the knife, and here we have really put all our efforts in order to get a safe sheath that allows easy access to the knife. The sheath has both a transport lock (the folding bracket with a strap) and a working safety detail that allows the knife to be in place until you decide to use it. It is a bit a belt-and-braces approach, but we like putting safety first – a lost knife is of no use. The transport lock will therefore allow the knife to be fastened tip-up or tip-down on the body or on your equipment without any risk.
Specifications:
Steel: Laminated CoS HRC 60
Blade length: 5.20" inch / 132 mm
Total length: 9.80” inch / 249 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun
Blade thickness: 6 mm
Knife weight 290 gr.
Additional Information:
Edge: Convex
Sheath Included: Zytel
Handle: Lanyard Hole
Finger Guard: Stainless Steel
Tang: Full Tang
Blade: Black Coated
Laminated CoS: A newly developed high alloy cobalt-special steel
Fallkniven Tungsten Carbine S1xbclip Knife
Regular price €309,00 EUR Save €-309,00 EURFallkniven Tungsten Carbine S1xbclip Knife
- Made by Fällkniven -
Introduction:
Your X-knife is the strongest, sharpest and safest stainless steel knife in production. If your life is in danger, you can always rely on your X-knife. It is designed to withstand all the stresses applied by the human hand, which means that it is virtually indestructible. It assumes, however, that you are careful with the knife and that it is used as intended, namely as a sharp precision tool. A few words about the all-black version: This surface is the hardest we have ever encountered. Although we really tried to wear down the black coating with the toughest, driest curly birch we could find, we never succeeded in getting holes in this extremely hard, durable surface. Still, we cannot guarantee that it will stay for time and eternity, after all, the blade can be ground and certainly a diamond or ceramic stone will bite on the surface.
Also for example a grain of sand can scratch or leave a mark in the coating. The hardness is at 2400 HV (Vickers) or around HRC 83. They have put a lot of energy into designing a safe knife sheath, which is actually where the knife will spend most of its time. The design of the sheath determines the access to the knife, and here we have really put all our efforts in order to get a safe sheath that allows easy access to the knife. As an accessory, the knife sheath is available with a stainless clip that allows you to easily carry the knife on your waist belt. The advantages are several – including that you can easily remove and stow your knife. When belt-mounted, the knife will hang vertically, a few centimeters lower than the belt, allowing it to be accessed even if wearing a backpack or long jacket. The sheath has both a transport lock (the folding bracket with a strap) and a working safety detail that allows the knife to be in place until you decide to use it. It is a bit a belt-and-braces approach, but we like putting safety first – a lost knife is of no use. The transport lock will therefore allow the knife to be fastened tip-up or tip-down on the body or on your equipment without any risk.
Specifications:
Steel: Laminated CoS HRC 60
Blade length: 5.20" inch / 132 mm
Total length: 9.80” inch / 249 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun
Blade thickness: 6 mm
Knife weight 290 gr.
Additional Information:
Edge: Convex
Sheath Included: Zytel with Clip
Handle: Lanyard Hole
Finger Guard: Stainless Steel
Tang: Full Tang
Blade: Black Coated
Laminated CoS: A newly developed high alloy cobalt-special steel