€250 to €500

Fallkniven Tungsten Carbine S1xbclip Knife

- Made by Fällkniven -

Introduction:

Your X-knife is the strongest, sharpest and safest stainless steel knife in production. If your life is in danger, you can always rely on your X-knife. It is designed to withstand all the stresses applied by the human hand, which means that it is virtually indestructible. It assumes, however, that you are careful with the knife and that it is used  as intended, namely as a sharp precision tool. A few words about the all-black version: This surface is the hardest we have ever encountered. Although we really tried to wear down the black coating with the toughest, driest curly birch we could find, we never succeeded in getting holes in this extremely hard, durable surface. Still, we cannot guarantee that it will stay for time and eternity, after all, the blade can be ground and certainly a diamond or ceramic stone will bite on the surface.

Also for example a grain of sand can scratch or leave a mark in the coating. The hardness is at 2400 HV (Vickers) or around HRC 83. They have put a lot of energy into designing a safe knife sheath, which is actually where the knife will spend most of its time. The design of the sheath determines the access to the knife, and here we have really put all our efforts in order to get a safe sheath that allows easy access to the knife. As an accessory, the knife sheath is available with a stainless clip that allows you to easily carry the knife on your waist belt. The advantages are several – including that you can easily remove and stow your knife. When belt-mounted, the knife will hang vertically, a few centimeters lower than the belt, allowing it to be accessed even if wearing a backpack or long jacket. The sheath has both a transport lock (the folding bracket with a strap) and a working safety detail that allows the knife to be in place until you decide to use it. It is a bit a belt-and-braces approach, but we like putting safety first – a lost knife is of no use. The transport lock will therefore allow the knife to be fastened tip-up or tip-down on the body or on your equipment without any risk.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 5.20" inch / 132 mm
Total length: 9.80” inch / 249 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 6 mm
Knife weight 290 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel with Clip

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Full Tang

Blade: Black Coated

Laminated CoS: A newly developed high alloy cobalt-special steel

FOX Arditi FX-595 W Dagger

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

Introduction:

In collaboration with Prof. Antonio G. G. Merendoni.
“To celebrate the 100th anniversary of the foundation of the Italian Assault units, I Gloriosi Arditi (1917-2017), FOX has made a reproduction of the first model of dagger supplied to them, keeping the similarity in a current modern version made with quality materials, combining history and excellence of Italian production in honor of the real heroes of the Great War, those who gave birth to the first modern special forces in the world and the first to specialize with the dagger fencing methods for individual combat.”

Prof. Antonio G.G. Merendoni.

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 6.89" inch / 175 mm
Total length: 11.42” inch / 290 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Zircote Wood

Blade thickness: 4 mm
Overall weight 211 gr.

Additional Information:

Blade Coating: Satin

Leather Sheath: Included

Gift Box: Included

FOX Combat Jungle FX-133 MGT Bushcraft Hunting Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives"

*Please request availability*

Introduction:

Here we offer a very robust bushcraft, outdoor and survival knife from Fox-Knives. The blade is made of high quality and durable Böhler-N690 steel, which has a Rockwell hardness of 58°-60° HRC. The full tang construction guarantees a very high stability. The complex Cordura scabbard guarantees a secure hold on the thigh.

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 7.48" inch / 190 mm
Total length: 12.60” inch / 320 mm
Handle length: 5.12” inch / 130 mm
Handle scales: Canvas Micarta OD Green 

Blade thickness: 6 mm
Overall weight 365 gr.

Additional Information:

Blade Coating: Black Idroglider

Leather Sheath: Included

Handle: Hole for Safety Cord

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.

FOX Elite Damascus 273 DOL Folding Knife

- Made by Fox Knives in Italy -

Design by: "Fox Knives".

Introduction:

The elegant Elite Damascus 273 pocket knife from Fox-Knives impresses not only with its high quality, but also with the balanced price-performance ratio.

Specifications:

Steel: Damasteel® RWL34 + PMC27 Super Dense Twist™ HRC 58-60 
Blade length: 3.15" inch / 80 mm
Total length: 7.48” inch / 190 mm
Handle length: 4.33” inch / 110 mm
Handle scales: Olive Wood 

Blade thickness: 3 mm
Overall weight 95 gr.

Additional Information:

Box: Included

Blade: Damascus

Bolsters: Stainless steel AISI 304

FOX Fairbairn Sykes FX-592 WAF Dagger

- Made by Fox Knives in Italy -

Design by: "Hill Knives".

Introduction:

Hill Knives:

“Dutch Commando Dagger is Based on the original Fairbairn Sykes design. It is a collector’s knife to honor the special forces of the world.”

The Dutch Knifemaking company Hill Knives was founded in 1979 by Frans van den Heuvel † (father) and Albert van den Heuvel (son), who both have a technical background as toolmakers. “What makes Hill Knives extraordinary is our passion and drive to create the ultimate quality and design when it comes to our knives".

- Please select your desired version in the selection menu above -

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 6.69" inch / 170 mm
Total length: 11.81” inch / 300 mm
Handle length: 5.12” inch / 130 mm
Handle: Anodized T6-6082 black anodized or Walnut wood

Blade thickness: 5 mm
Overall weight 205 gr.

Additional Information:

Blade Coating: Physical Vapor Deposition (PVD)

Leather Sheath: Included

PVD
(Physical Vapor Deposition) is a variety of vacuum deposition methods used to deposit thin films by the condensation of a vaporized form of the desired film material onto various workpiece surface. The coating method involves purely physical process such as high temperature vacuum evaporation with subsequent condensation.

FOX Flipper FX-302 or FX-302 ST or FX-302 G10 Folding Knife

- Made by Fox Knives in Italy -

Design by: "Jens Ansø".

Introduction:

The Flipper features a sculpted handle pattern often referred as ‘Ansø texture’.
A very comfortable handle and a curvy utility blade.

Jens Ansø:

“Ansø knives is about beauty, simplicity and purpose driven design”.

- Please select your desired version in the selection menu above -

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.54" inch / 90 mm
Total length: 8.07” inch / 205 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Titanium / Palisander wood / G10 black

Blade thickness: 4 mm
Overall weight 185 gr.

Additional Information:

Blade Coating: Satin / Black Idroglider stone washed

Clip: stainless steel 420J2B

Sheath: Included

Handle: Hole for Safety Cord

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.

FOX FX-525 DB Damascus Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bob Terzuola".

Introduction:

Bob Terzuola:

"I always design my knives to be functional but graceful. The utility is always the main factor in my designs as a knife should be perfectly useful and comfortable in a variety of positions and cutting situations”.

Specifications:

Steel: Damasteel® Dense Twist ™l HRC 58-60 
Blade length: 3.35" inch / 85 mm
Total length: 7.87” inch / 200 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Bocote wood

Blade thickness: 3 mm
Overall weight 100 gr.

Additional Information:

Blade: Damascus

Sheath: Included

FOX "FX-525 Ti BL" Terzuola Titanium Frame Lock Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bob Terzuola".

Introduction:

This knife is a “Every Day Carry” designed for daily utility and self defense. It is compact and strongly made with fine materials. Easy to carry with its convenient clip.

Bob Terzuola:

"I always design my knives to be functional but graceful. Utility is always the main factor in my designs as a knife should be perfectly useful and comfortable in a variety of positions and cutting situations”.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.35" inch / 90 mm
Total length: 7.87” inch / 200 mm
Handle length: 4.53” inch / 110 mm
Handle scales: Bead blasted gray titanium  / Anodized blue titanium 

Blade thickness: 3 mm
Overall weight: 3.53 oz / 100 gr.

Additional Information:

Blade: Stone washed

Handle: Hole for Safety Cord

Clip: Anodized titanium

FOX Karambit FX-599Ti or FX-599TiCS

- Made by Fox Knives in Italy -

Design by: "Fox Knives":

- Please select your desired version from the drop-down menu above -

Fox Knives Military Division:

Fox Knives Military Division (FKMD) is a special brand of Fox Knives, which was established in 2005. Their range of goods focuses on operation purposes, which matches the special requests of police, military and rescue units. Since the establishment, FKMD is a supplier of NATO and cooperates closely with elite units around the world.

Introduction:

This beautiful knife impresses with its elegance and stability.

Specifications:

Steel: Elmax stainless steel HRC 58-60 
Blade length: 2.55" inch / 65 mm
Total length: 6.69” inch / 175 mm
Handle length: 4.33” inch / 110 mm
Handle scales: Carbon fiber with a titanium frame

Blade thickness: 3 mm
Overall weight 80 gr.

Additional Information:

Blade Coating: Bead blasted or Cerakote™ black

Clip: titanium - reversible

Back Ring: titanium

Sheath: included

Cerakote™
It Is a ceramic based finish that can be applied to metals, enhances a number of physical performance properties including abrasion/wear resistance, corrosion resistance, chemical resistance, impact strength, and hardness.

FOX Phoenix FX-531 Ti BL or FX-531 Ti BR - E.D.C Folding Knife

- Made by Fox Knives in Italy -

Design by: "Tashi Bharucha".

Introduction:

Tashi Bharucha:

“I have a couple of things in mind when I design a folder: I try to pack as much blade as possible into the handle, I want the knife to feel great in the hand and to look good.

It should have character. The Phoenix has all those features in one tight little package. Fantastic ergonomics and... a sexy look!”

- Please select your desired version in the selection menu above -

Specifications:

Steel: M390 stainless steel HRC 59-60 
Blade length: 3.35" inch / 85 mm
Total length: 7.87” inch / 200 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Titanium anodized blue / Titanium anodized brown  

Blade thickness: 4 mm
Overall weight 150 gr.

Additional Information:

Blade Coating: Satin

Clip: Titanium

Sheath: Included

FOX Radius FX-550 Ti Sandblasted Titanium Pocket Folding Knife

- Winner of 2019 BLADE Show: "Imported Knife of the Year and Overall Knife of the Year".

- Made by Fox Knives in Italy -

Design by: "Denis Simonutti".

Introduction:

The Fox Knife Radius FX-550 Ti is an impressive and remarkable pocket knife. At the 2019 Blade Show in Atlanta, Georgia USA this knife won awards for the best imported knife and Overall Knife of the Year. The Fox Knife Radius is a revolutionary pocket knife. The thumb stud is added to the handle and also functions as a lock. It’s really unique! By pushing the thumb stud you can unlock the knife to make sure you can close it. No one has ever done that.

The blade is made from high-tech Böhler M390 steel. One of the most popular types of steel on the market. It retains its sharpness for a really long time. As such you hardly have to sharpen the knife. So a really cool blade. But what about the handle? It is made from titanium. And the milling work was nicely carried out Subtle grip on specific parts, silver accents simply stunning.

Specifications:

Steel: stainless steel M390 HRC 59-61
Blade length: 2.95" inch / 75 mm
Total length: 7.28” inch / 185 mm
Handle length: 4,33” inch / 110 mm
Handle scales: Sandblasted Titanium

Blade thickness: 4 mm
Overall weight 140 gr.

Additional Information:

FOX Radius FX-550 TiB Pocket Folding Knife

- Winner of 2019 BLADE Show: "Imported Knife of the Year and Overall Knife of the Year".

- Made by Fox Knives in Italy -

Design by: "Denis Simonutti".

Introduction:

The Fox Knives Radius FX-550 TiB is an impressive and remarkable pocket knife. At the 2019 Blade Show in Atlanta, Georgia USA this knife won awards for the best imported knife and Overall Knife of the Year. The Fox Knives Radius is a revolutionary pocket knife. The thumb stud is added to the handle and also functions as a lock. It’s really unique! By pushing the thumb stud you can unlock the knife to make sure you can close it. No one has ever done that.

The blade is made from high-tech Böhler M390 steel. One of the most popular types of steel on the market. It retains its sharpness for a really long time. As such you hardly have to sharpen the knife. So a really cool blade. But what about the handle? It is made from titanium. And the milling work was nicely carried out Subtle grip on specific parts, silver accents simply stunning.

Specifications:

Steel: stainless steel M390 HRC 59-61
Blade length: 2.95" inch / 75 mm
Total length: 7.28” inch / 185 mm
Handle length: 4,33” inch / 110 mm
Handle scales: Titanium Black PVD

Blade thickness: 4 mm
Overall weight 140 gr.

Additional Information:

FOX Shadow FX-533 CF or FX-533 Ti - Titanium Frame Lock Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bastinelli".

Introduction:

Bastinelli:

“Generally, for all my design, I always try to associate a perfect ergonomics, and a real utility in accordance with the needs of customers, civilians or professionals”.

Specifications:

Steel: Elmax stainless steel HRC 58-60
Blade length: 3.94" inch / 100 mm
Total length: 8.66” inch / 220 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Carbon fiber or Titanium anodized black  

Blade thickness: 4 mm
Overall weight 140 gr.

Additional Information:

Blade Coating: Stone washed / Stone washed PVD

Clip: stainless steel 420J2B

Sheath: Included

Handle: Hole for Safety Cord

PVD
(Physical Vapor Deposition) is a variety of vacuum deposition methods used to deposit thin films by the condensation of a vaporized form of the desired film material onto various workpiece surface. The coating method involves purely physical process such as high temperature vacuum evaporation with subsequent condensation.

Steel: 1.4116 Stainless Steel
Blade length: 3,543” inch / 90 mm
Total length: 7.874” inch /  200 mm
Handle length: 4.330” inch / 110 mm
Handle scales: Green Maple Root Wood
Bolster: Nickel Silver
Knife weight 112 gr.

Additional Informations about the steel quality:

MOVA - 1.4116 (X50CrMoV15) 55-56 HRC

A excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosion resistant.

(We from Dream-Knives have no influence on which serial number we receive from Muela)

Specifications:

Steel: Damascus Stainless Steel (RWL34 & PMC27)
Blade length: 3,543” inch / 90 mm
Total length: 7.874” inch /  200 mm
Handle length: 4.330” inch / 110 mm
Handle scales: African Grenadill Wood
Bolster: Nickel Silver
Knife weight 115 gr.

Additional Informations about the steel quality:

The “Stainless Damascus Steel” it´s compound about 130 layers although it can range between 90 and 130 depending on the thickness and production. Using two kind of rapidly solidified powder steels (RWL34-PMC27) welded at a temperature of 1150ºC and at a gas pressure of about 1.000 atmospheres, we get a material hard, durable, heat resistant and the fracture strength thereby increased radically.