€250 to €500

German PUMA Falknersheil II. Falconer Knife

- Made in Solingen / Germany -

Introduction:

This is a very fine knife for Falconers. The fixed blade falconry knife from PUMA can be used for all work during the hunt. It is extremely handy, the black micarta handle scales are attached with brass rivets. The front and top jaws are also made of brass. We deliver the falknersheil II including a high quality leather sheath.

Specifications:

Steel: 440C / 55-57 HRC
Blade length: 3.819” inch / 97 mm
Total length: 7.874” inch / 200 mm
Handle length: 4.055” inch / 103 mm
Handle scales: Black Micarta
Blade thickness: 3 mm
Overall weight 108 gr.

Additional Information:

– Leather Sheath Included

– Hand guard

– Brass Bolster

PUMA Jagdnicker / Frevert Hunting Knife

- Made in Solingen / Germany -

*Last piece available*

Introduction:

PUMA G.E.K. German Expedition Knife

- Handcrafted in Solingen / Germany -

Pre order available:

Deliverable approx. August 30th 2025

Introduction:

German PUMA Phoenix Bowie Hunting Knife

- Made in Solingen / Germany -

Introduction:

The "Phoenix" belongs to a type of knife that was already known well over one hundred and fifty years ago in the vastness of the North American prairie and still carries the typical feel of the "Wild West" - from PUMA Solingen.

From the series of PUMA Bowie knives comes our model "phoenix". This knife with its forged blade does every trapper credit. It is a real all-rounder. The 7 mm thick full tang blade made of stainless 1.4116 steel reaches a hardness of 55-57 HRC and is therefore up to any task. A solid parry element keeps the working hand away from the blade. The handle scales made of warp-free pakka wood with a catch strap eyelet fit perfectly and securely in the hand. This high quality knife is carefully handcrafted in Solingen, Germany. A sturdy saddle leather sheath is included.

Specifications:

Steel: 1.4116 / 55-57 HRC, forged
Blade length: 7.874” inch / 200 mm
Total length: 12.874” inch / 327 mm
Handle length: 5.000” inch / 127 mm
Handle scales: Pakka Wood
Blade thickness: 7 mm
Overall weight 403 gr.

Additional Information:

– Leather Sheath Included

– Strap Eye for the sheath

– Hand guard

– Aluminum Bolster

– PUMA design

German PUMA Rotwildmesser Hunting Stag Knife

- Made in Solingen / Germany -

Introduction:

The model "rotwild" is a heavy, robust and yet shapely hunting knife that is not too bad for any task - from PUMA Solingen.

Knives used for hunting should have good stability. This insight was consistently implemented in our PUMA "rotwild". The result is a heavy hunting all-rounder with a strong flat-ground blade whose full tang is fitted with voluminous deer horn scales. A guard made of solid nickel silver serves as hand protection. These features make the "rotwild" model suitable for heavier cutting tasks and will not let its owner down in any situation.

Since we process natural products, optical deviations between knife illustration and the originals are possible.

Specifications:

Steel: 440A / 55-57 HRC
Blade length: 5.118” inch / 130 mm
Total length: 10.236” inch / 260 mm
Handle length: 5.118” inch / 130 mm
Handle scales: stag horn
Blade thickness: 4 mm
Overall weight 380 gr.

Additional Information:

– Leather Sheath Included

– PUMA Design

German PUMA Saubart Hunting Knife

- Made in Solingen / Germany -

Introduction:

The "Saubart" is a handy and short, yet very powerful knife in solid construction for universal use - from PUMA Solingen.

 The PUMA "saubart" offers the user many advantages through the following features:

As a blade material, stainless Sandvik steel 14C28N is used, which brings it to a Rockwell hardness of 60-62 HRC, giving the knife a high edge retention.
The new blade shape, previously tested by hunters, allows the use of the complete cutting surface. In addition, the back of the blade is provided with a sharpened phase. With a blade length of 100 mm and a thickness of 3 mm, the knife is compact and allows for practical handling. Thanks to the full tang construction, the "saubart" is also very stable. Pakka wood was chosen for the handle sheathing. This laminated and consolidated material is very durable and warp-free at the same time. Thanks to the pronounced finger recesses in combination with the strong toggle made of nickel silver, there is a secure grip when working with this high-quality PUMA knife. A black saddle leather sheath is included for safe carrying and transport.

Specifications:

Steel: Sandvik 14C28N / 60-62 HRC
Blade length: 3.937” inch / 100 mm
Total length: 8.346” inch / 212 mm
Handle length: 4.409” inch / 112 mm
Handle scales: Pakka wood
Blade thickness: 3 mm
Overall weight 182 gr.

Additional Information:

– Leather Sheath Included

– Hole for Safety Cord

– Hand guard

– Nickel Silver Bolster

German PUMA Skinner Hunting Stag Knife

- Made in Solingen / Germany -

Introduction:

The Puma"skinner" is a special knife in classic form, which was already developed in the second half of the last century and has lost nothing of its popularity - from PUMA Solingen.

The tip of the skinner blade, which is typical for skinning, is slightly above the back of the blade on this Solingen classic. This makes the cutting edge very bulbous in the front part and thus lengthens it. This has the advantage that much longer cuts can be made and the repeated application of the knife is reduced. Since the tip of the blade is very high up, the risk of accidentally piercing the precious hide is also significantly minimized.  On the continuous Flacherl sit selected deer horn scales and a reliable finger protection made of aluminum.

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 5.079” inch / 129 mm
Total length: 9.449” inch / 240 mm
Handle length: 4.370” inch / 111 mm
Handle scales: Stag horn
Blade thickness: 4.5 mm
Overall weight 160 gr.

Additional Information:

– Leather Sheath Included

– Strap Eye for the sheath

– Hand guard

– Aluminum Bolster

German PUMA Unicum Collectors Hunting Knife

- Handcrafted in Solingen / Germany -

Serial number: #71

Introduction:

Specifications:

Blade length: 3.937" inch / approx. 100 mm
Handle length: 4.055" inch / approx. 103 mm
Steel: Sandvik 14C28N - 60°-62° HRC
Total length: 7.992" inch / approx. 203 mm
Knife weight: 132 g
Scales: Pakka Wood
Sheath: Leather

German PUMA Waidmann Hunting Knife

- Made in Solingen / Germany -

Introduction:

The PUMA waidmann is truly an impressive hunting knife!

It not only combines functionality with appealing design but also offers excellent handling thanks to the olive wood scales and the nickel silver bolsters. The fact that it is suitable for various applications in the field makes it a versatile tool that is useful both for hunting and in outdoor activities. Additionally, each knife is unique due to the distinctive grain of the wood, making it a special piece.

Specifications:

Steel: 1.4116 stainless steel / 55-57 HRC
Blade length: 4.685” inch / 119 mm 
Total length: 9.212” inch / 234 mm 
Handle length: 4.527” inch / 115 mm
Handle scales: Olive Wood
Blade thickness: 3 mm
Overall weight 179 gr.

Additional Information:

– Leather Sheath Included

– Hand guard

German Puma White Hunter 240 Olive Hunting Knife

- Made in Solingen / Germany -

Introduction:

The PUMA White Hunter 240 with Olive Wood Handle is equipped with a proven White Hunter blade made of stainless steel 1.4116. The PUMA white hunter 240 was developed by us for the 240th anniversary of the company. Modified according to the latest ergonomic findings, it has lost none of its charm. This offers a thumb rest on the back of the knife, which ensures a safe transmission of force during heavy cutting work. The solid handle features beautifully figured Olive wood scales and large brass rivets. A pronounced hand guard provides the necessary safety.

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 6,102 " inch / 157 mm
Total length: 10-5/8 " inch / 273 mm
Handle length: 4,527 " inch / 116mm
Handle scales: Olive Wood
Blade thickness: 4 mm
Net weight 278 gr.

German PUMA White Hunter 240 Hunting Stag Knife

- Made in Solingen / Germany -

Introduction:

Puma "White Hunter 240 stag" is a further development of the classic with tried and tested universal blade for the strongest demands - from PUMA Solingen.

The PUMA "White Hunter 240" is a new version of the well-known classic. On the occasion of our 240th company anniversary, we have reworked it and modified it according to the latest ergonomic findings, but without changing the proven characteristics of the original model. The sturdy tip is robust enough to open cans or pry open crown caps. A hatchet edge is ground into the center of the back of the blade for coarse work such as splitting firewood or chopping bones. Our "white hunter 240" in this version is equipped with deer horn handle scales, which are firmly riveted to the tang that goes fully through the handle. With all these attributes, this successful model from the house of PUMA is and remains an innovative knife that is suitable for all conceivable applications.

Specifications:

Steel: 440 C / 57-60 HRC
Blade length: 6.220” inch / 158 mm
Total length: 10.787” inch / 274 mm
Handle length: 4.567” inch / 116 mm
Handle scales: Stag horn
Blade thickness: 4 mm
Overall weight 302 gr.

Additional Information:

– Leather Sheath Included

– Designed by H.P. Knoop

– Hand guard

– Strap Eye for the sheath

– Nickel Silver Bolsters