160mm

Cudeman 121-L "Pistolo" Bowie Hunting Knife

- Made by Cudeman in Spain -

Cudeman Hunting Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 6.299” inch / 160 mm
Total length: 11.614” inch /  295 mm
Handle length: 5.315” inch / 135 mm
Handle scales: Satin Olive Wood
Blade thickness: 5 mm
Knife weight 257 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 95 gr.

– Fixation of the Handle: Flat Head Rivets

– Blade shape: Clip-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

Cudeman 126-M or 126-M-K Bushcraft Survival Knife

- Made by Cudeman in Spain -

Introduction:

This is a very sturdy Bushcraft Knife for all outdoor activities. The full tang blade is made of high-quality MOVA stainless steel and has a Rockwell hardness of 54° - 56° degrees. There are two editions available: Standard or KYDEX.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 3.543” inch / 160 mm
Total length: 7.677” inch / 300 mm
Handle length: 4.134” inch / 140 mm
Handle scales: Black Micarta with Detailed Red Line
Blade Width: 5 mm
Net weight 384 gr.

Description:

All versions.

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Drop-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

Standard Edition Sheath Version:

– Black Leather Sheath

– Hole for a Safety Cord

– Sheath Weight : 275 gr.

– Glass-Breaker

– Sharpening Stone with Mirror,  Ruler (12cm), Compass and Sundial

KYDEX Edition Sheath Version:

– Hole for a Safety Cord

– Sheath weight : 110 gr.

– Glass-Breaker

Cudeman 155-M or 155-MC Entresierras Bushcraft Hunting Knife

- Made by Cudeman in Spain -

Cudeman Hunting Knife with MOVA blade.

There are two Editions: Standard or Special.

The Special Edition has a luxury sheath with extras.

- Please select your desired version in the selection menu above -

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 6.230” inch / 160 mm
Total length: 11.417” inch / 290 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Black Micarta with Detailed Red Line
Blade thickness: 5 mm
Overall weight 420 gr.

Description:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Clip-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

Standard Edition Sheath Version:

– Black Leather Multi-position Sheath

– Hole for a Safety Cord

– Glass-Breaker

– Sheath weight: 146 gr.

Special Edition Sheath Version:

– Black Leather Multi Position Sheath

– Sheath Weight 304 gr.

– Glass-Breaker

– Hole for a Safety Cord

– Paracord 280 cm

– Firesteel

– Sharpening Stone with Signal Mirror, Ruler (12cm), Compas and Sundial

Cudeman 155-X / 155-XC Entresierras Bushcraft Hunting Knife

- Made by Cudeman in Spain -

Cudeman Hunting Knife with MOVA blade.

There are two Editions: Standard or Special.

The Special Edition has a luxury sheath with extras.

- Please select your desired version in the selection menu above -

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 6.230” inch / 160 mm
Total length: 11.417” inch / 290 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Brown Micarta with Detailed Red Line
Blade thickness: 5 mm
Overall weight 420 gr.

Description:

All versions.

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Clip-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

Standard Edition Sheath Version:

– Brown Leather Multi-position Sheath

– Hole for a Safety Cord

– Glass-Breaker

– Sheath weight: 146 gr.

Special Edition Sheath Version:

– Brown Leather Multi Position Sheath

– Sheath Weight 304 gr.

– Glass-Breaker

– Hole for a Safety Cord

– Paracord 280 cm

– Firesteel

– Sharpening Stone with Signal Mirror, Ruler (12cm), Compas and Sundial

Fallkniven A1bL Survival Knife

- Made by Fällkniven -

Introduction:

A new world standard was set with the Fallkniven A1 through attention to important details including technical design, ergonomics and economy. The Fallkniven A1 surpasses international standards for strength, personal security capabilities, and value for money. The Fallkniven A1 is an all-purpose knife on the larger side designed for heavy duty use. The powerful blade is made of extremely hard and tough laminated VG10 steel, and will withstand the stress of hard use. The knife is superb at chopping as well finer daily cutting tasks thanks to the ergonomic grip. The full tang goes entirely through the handle so you can strike with the end of it without breaking the grip. The sturdy black leather sheath allows you to fasten the knife on your belt or your pack, and even upside down. The Fallkniven A1 is unaffected by water and works equally well in extreme cold and stifling heat. If your needs require that no reflections come from your knife blade, we offer a black CeraKote option. The CeraKote is an extremely tough surface coating that will also protect the blade from corrosion. CeraKote is a hard coating made of Teflon and ceramics that we apply for military users and others who want to avoid shiny blades. Be aware, however, that although CeraKote is an industry standard, it is also just a finish applied to the metal blade similar to painting a car. Please note that physical abrasions could scratch through the CeraKote coating. Over time, the black CeraKote may separate from the blade, but more durable coatings make the knife difficult to sharpen and cost up to 100 times more than CeraKote.

Attaching a black surface on a rust resistant, perfectly smooth blade so that it sticks for time and eternity is all impossible. We have tested some extremely hard coatings, but they proved to be many times more expensive and make it harder to sharpen the knife.

Specifications:

Steel: Laminated VG10 HRC 59

Blade length: 6.30" inch / 160 mm
Total length: 11.02” inch / 280 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Kraton

Blade thickness: 6 mm
Knife weight 319 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade: Black Coated

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven A1bz Survival Knife

- Made by Fällkniven -

Introduction:

A new world standard was set with the Fallkniven A1 through attention to important details including technical design, ergonomics and economy. The Fallkniven A1 surpasses international standards for strength, personal security capabilities, and value for money. The Fallkniven A1 is an all-purpose knife on the larger side designed for heavy duty use. The powerful blade is made of extremely hard and tough laminated VG10 steel, and will withstand the stress of hard use. The knife is superb at chopping as well finer daily cutting tasks thanks to the ergonomic grip. The full tang goes entirely through the handle so you can strike with the end of it without breaking the grip. The sturdy black leather sheath allows you to fasten the knife on your belt or your pack, and even upside down. The Fallkniven A1 is unaffected by water and works equally well in extreme cold and stifling heat. If your needs require that no reflections come from your knife blade, we offer a black CeraKote option. The CeraKote is an extremely tough surface coating that will also protect the blade from corrosion. CeraKote is a hard coating made of Teflon and ceramics that we apply for military users and others who want to avoid shiny blades. Be aware, however, that although CeraKote is an industry standard, it is also just a finish applied to the metal blade similar to painting a car. Please note that physical abrasions could scratch through the CeraKote coating. Over time, the black CeraKote may separate from the blade, but more durable coatings make the knife difficult to sharpen and cost up to 100 times more than CeraKote.

Attaching a black surface on a rust resistant, perfectly smooth blade so that it sticks for time and eternity is all impossible. We have tested some extremely hard coatings, but they proved to be many times more expensive and make it harder to sharpen the knife.

Specifications:

Steel: Laminated VG10 HRC 59

Blade length: 6.30" inch / 160 mm
Total length: 11.02” inch / 280 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Kraton

Blade thickness: 6 mm
Knife weight 319 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade: Black Coated

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven A1L Survival Knife

- Made by Fällkniven -

Introduction:

A new world standard was set with the Fallkniven A1 through attention to important details including technical design, ergonomics and economy. The Fallkniven A1 surpasses international standards for strength, personal security capabilities, and value for money. The Fallkniven A1 is an all-purpose knife on the larger side designed for heavy duty use. The powerful blade is made of extremely hard and tough laminated VG10 steel, and will withstand the stress of hard use. The knife is superb at chopping as well finer daily cutting tasks thanks to the ergonomic grip. The full tang goes entirely through the handle so you can strike with the end of it without breaking the grip. The sturdy black leather sheath allows you to fasten the knife on your belt or your pack, and even upside down. The Fallkniven A1 is unaffected by water and works equally well in extreme cold and stifling heat.

Specifications:

Steel: Laminated VG10 HRC 59
Blade length: 6.30" inch / 160 mm
Total length: 11.02” inch / 280 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Kraton

Blade thickness: 6 mm
Knife weight 319 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade: Satin Finish

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven A1pro Pilot Survival Knife

- Made by Fällkniven -

Introduction:

There are basic survival knives, and there are survival knives for the professional. Our original models of the F1, S1 and A1 have provided exceptional service for more than 20 years. And due to their outstanding quality and durability they will continue to perform for many more years. Nevertheless our drive to continually improve our knives has led us to develop the new Pro Series. The Pro Series are survival knives of near-unimaginable quality, durability and performance. Compared to their predecessors, the Pro series of F1, S1 and A1 differs in the following important areas:

1. The original laminated VG10 steel is upgraded to a laminate cobalt steel (lam. CoS) blade that ensures a durable edge and improved edge retention.
2. The blades are thicker increasing the torsional rigidity so the knives will withstand even greater external forces.
3. The full-length tapered tang is wider and thicker and therefore significantly stronger.
4. The crossguard is now made of stainless steel and permanently welded to the tang.
5. The convex blade edge has been refined to improve its cutting properties.
6. The zytel sheaths are redesigned, more durable, and better suited for the Molle attachment system.

Understandably these knives fall into a higher price category. However, considering the unparalleled quality they are by no means over priced. A professional survival knife must perform in all weather with no exceptions. The professional survival knife must be comfortable and safe to handle for both fine and rough work in summer heat and winter cold. We at Fallkniven have considered every design aspect of these superb professional survival knives and we stand behind them with a lifetime warranty on materials and workmanship.

Steel: Laminated CoS HRC 60
Blade length: 6.30" inch / 160 mm
Total length: 11.14” inch / 283 mm
Handle length: 4.84” inch / 123 mm
Handle scales: Thermorun

Blade thickness: 7 mm
Knife weight 363 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Finger Guard: Stainless Steel

Laminated CoS: A newly developed high alloy cobalt-special steel

Muela African Big Five "Buffalo" Hunting Knife

 - Handcrafted in Spain by Muela -

Introduction:

Here we offer one of the African BIG FIVE models from Muela for sale. This is the model "Buffalo". All BIG FIVE models have a genuine stag handle and come with a beautiful Bowie blade. Only the butt caps differ according to the respective animal of the Big Five. Bolsters and guard are made of polished brass. Each BIG FIVE collectors knife, comes in a beautiful presentation box.

Specifications:

Steel: 1.4116 = “MOVA”  (X50CrMoV15)
Blade length: 6.299” inch / 160 mm
Total length: 11.417” inch /  290 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Staghorn
Knife weight: 271 gr.

Steel quality informations:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Muela African Big Five "Elephant" Hunting Knife

 - Handcrafted in Spain by Muela -

Introduction:

Here we offer one of the African BIG FIVE models from Muela for sale. This is the model "Elephant". All BIG FIVE models have a genuine stag handle and come with a beautiful Bowie blade. Only the butt caps differ according to the respective animal of the Big Five. Bolsters and guard are made of polished brass. Each BIG FIVE collectors knife, comes in a beautiful presentation box.

Specifications:

Steel: 1.4116 = “MOVA”  (X50CrMoV15)
Blade length: 6.299” inch / 160 mm
Total length: 11.417” inch /  290 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Staghorn
Knife weight: 273 gr.

Steel quality informations:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Muela African Big Five "Leopard" Hunting Knife

 - Handcrafted in Spain by Muela -

Introduction:

Here we offer one of the African BIG FIVE models from Muela for sale. This is the model "Leopard". All BIG FIVE models have a genuine stag handle and come with a beautiful Bowie blade. Only the butt caps differ according to the respective animal of the Big Five. Bolsters and guard are made of polished brass. Each BIG FIVE collectors knife, comes in a beautiful presentation box.

Specifications:

Steel: 1.4116 = “MOVA”  (X50CrMoV15)
Blade length: 6.299” inch / 160 mm
Total length: 11.417” inch /  290 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Staghorn
Knife weight: 253 gr.

Steel quality informations:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Muela African Big Five "Lion" Hunting Knife

 - Handcrafted in Spain by Muela -

Introduction:

Here we offer one of the African BIG FIVE models from Muela for sale. This is the model "Lion". All BIG FIVE models have a genuine stag handle and come with a beautiful Bowie blade. Only the butt caps differ according to the respective animal of the Big Five. Bolsters and guard are made of polished brass. Each BIG FIVE collectors knife, comes in a beautiful presentation box.

Specifications:

Steel: 1.4116 = “MOVA”  (X50CrMoV15)
Blade length: 6.299” inch / 160 mm
Total length: 11.417” inch /  290 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Staghorn
Knife weight: 262 gr.

Steel quality informations:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Muela African Big Five "Rhino" Hunting Knife

 - Handcrafted in Spain by Muela -

Introduction:

Here we offer one of the African BIG FIVE models from Muela for sale. This is the model "Rhino". All BIG FIVE models have a genuine stag handle and come with a beautiful Bowie blade. Only the butt caps differ according to the respective animal of the Big Five. Bolsters and guard are made of polished brass. Each BIG FIVE collectors knife, comes in a beautiful presentation box.

Specifications:

Steel: 1.4116 = “MOVA”  (X50CrMoV15)
Blade length: 6.299” inch / 160 mm
Total length: 11.417” inch /  290 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Staghorn
Knife weight: 261 gr.

Steel quality informations:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

German PUMA Wildtöter Hunting Collectors Knife

- Made in Solingen / Germany -

Introduction:

The Puma "Wildtöter" is a super elegant hunting knife, which is characterized by its beauty, but also by its robustness.

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 6.299” inch / 160 mm
Total length: 11.417” inch / 290 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Black Pakka Wood
Blade thickness: 3.5 mm
Overall weight 264 gr.

Additional Information:

– Leather Sheath Included

– Hand guard

– Nickel Silver Bolster