3,188inch - 3,937inch

Fallkniven F1pro Survival Knife

- Made by Fällkniven -

Introduction:

There are survival knives, and then there are real survival knives. Our basic models F1, S1 and A1 have served us since the end of the last century and due to their outstanding quality and durability, they will continue to do so for many years to come. Despite this, it has been our ambition to strive for continuous improvement and this has led to the new Pro series that takes the concept of survival knife to new heights. We started developing these impressive knives in 2010 and five years later we were finally able to offer three survival knives that set a new standard for how a real survival knife should look and work: the Pro series.

To put it simply – a knife is a blade and a handle. But if this important tool is to be both strong and keep the sharpness well, you must use really advanced materials and have a long and deep experience when it comes to being able to make knives for tough tasks. If you also want to claim to call a knife “professional”, you take on a great responsibility towards the user. The Pro series can do that. F1pro/elmax differs from its predecessor (F1pro/CoS) in the following important details:

The blade in laminated cobalt steel is replaced by a solid blade made of powder steel, Elmax SuperClean from Uddeholm, Sweden. It gives a blade that is 20% stronger and that keeps the sharpness significantly longer.

Compared to our first series of knives (F1, S1, A1):

The blades are consistently thicker, which gives an increased torsional rigidity – they can withstand even greater stresses than before.The tapered tang is wider and thicker and thus much stronger.The crossguard is made of stainless steel and permanently mounted on the tang.The convex edge has been refined for improved cutting properties.The newly developed zytel sheaths are strong and easy to adapt to the MOLLE system.

Of course, this knife ends up in a higher price range. But, given the outstanding quality, it is by no means overpriced. A professional survival knife should work in all weathers and we really mean all. It should also be comfortable, safe and convenient to handle whether it is used for fine or rough work, in desert heat or polar cold. Believe us, we have considered everything in the design of this stylish, advanced survival knife.

Specifications:

Steel: ELMAX Super Clean HRC 61-62
Blade length: 3.94" inch / 100 mm
Total length: 8.54” inch / 217 mm
Handle length: 4.615” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 5 mm
Knife weight 176 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade Finish: Satin

Fallkniven HK9L Exclusive Hunting Knife

- Made by Fällkniven -

Introduction:

The HK9 is a hunting knife for the advanced, experienced hunter who knows where to place the blade on the prey. It is also a good all-round knife. The knife feels sturdy in the hand, compact in a way, easy to use, and stable. It does not appear so, but when using the knife you have the feel that it is one of the world’s most advanced hunting knives you have in your hand. If not before, it is noticeable when beginning to cut – the laminated powder steel keeps an edge unbelievably well.

This knife is delivered with a very well made black leather sheath which keeps the knife safely without any snappers. The leather is about 3 mm thick and it has a thick liner along the sewing. Our idea is that the sheath will fit so tight to your belt that you should be able to push/pull the knife from its sheath by using one hand only. Keep the sheath clean and dry, regular shoeshine is OK but not grease because it makes the leather soft!

Specifications:

Steel: 3G HRC 62
Blade length: 3.54" inch / 90 mm
Total length: 7.68” inch / 195 mm
Handle length: 4.13” inch / 105 mm
Handle: Brown Micarta

Blade thickness: 4.5 mm
Knife weight 182 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade Finish: Satin

Fallkniven Idun NL5L Hunting Knife

- Made by Fällkniven -

Introduction:

In Norse mythology, Idun was the goddess of fertility, and was responsible for guarding the apples that ensured the gods eternal youth. To many, she was also a symbol of love and rebirth, and in a famous poem she was referred to as the lover of the gods (ása leika). Unlike earlier knife models in the Northern Lights series, the NL5 is a little rounder and softer in form, and therefore an excellent choice as a hunting knife. The straight, fairly generous leather grip gives complete control over the powerful laminated VG7 blade. The NL5L is as attractive as it is effective especially in the hands of the experienced hunter. When it comes to the Northern Light Series nothing has been spared to make this knife as strong, beautiful and comfortable as possible. The knife is a pleasure to look at and a thrill to use.

The blade is made out of laminated VG7 steel, where the edge is in a technically well-designed VG7 steel and the sides consist of tough, all-stainless 420J2 steel. This combination is good since it brings together all conceivable and desirable properties such as resilience, resistance to torque, and edge-durability in a single blade. A 5 mm thick blade in itself would be strong enough for most tasks – with laminate technology one can expect an additional 20% strength in the form of resistance to bending, as compared to an ordinary VG7 blade.

The beautiful handle consists of specially selected oxhide that gives a sure and rugged grip. It ages with elegance and as the years pass it acquires an attractive brown patina. The handle is unaffected by oil and solvents and impervious to water. When the oxhide drys out, small cracks on the handle can appear, but they disappear when the knife is put to use again.

We at Fallkniven believe the convex edge to be the ultimate combination of cutting performance and edge strength. Anyone who knows anything about knife making knows that such an edge can only be made by hand, and that’s why 99.99% of all knives don’t have that kind of edge. Machines play a large part in how knives are made, and CNC (Computer Numerically Controlled) robots and grinders shape the blades as best they can. The machines are loaded with stacks of blade blanks so that production can go on 24 hours a day and the result is quite often quite good. Well, good for the price anyway. However, if you want top-drawer strength, tremendous corrosion-resistance, edge durability and custom design, no machine can come close to the craftsmanship of a trained and skilled knifesmith. Therefore, we take great pride in presenting our Northern Light Series even though we know that only the most quality-conscious knife user will appreciate its features.

Each Northern Lights series knife comes with a high-quality black leather sheath.

Specifications:

Steel: Laminated VG7 Wolf HRC 59
Blade length: 3.94" inch / 100 mm
Total length: 8.46” inch / 215 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Leather

Blade thickness: 5 mm
Knife weight 170 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather 

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Protruding Broad Tang

Fallkniven Kolt KKLz Hunting Knife

- Made by Fällkniven -

Introduction:

The Kolt Knife is probably Fallkniven´s best dry meat knife, no other knife is as good as the KK when it comes to cutting thin slices of a piece of dried or smoked meat. Of course, the knife can be used for a lot more and the simple reason is the handy size. In its original form the Kolt Knife had a very simple blade cover. However, many fans of the KK knife today were interested in a traditionally shaped leather sheath. We are now offering the KK frock knife with well-fitting sheath made of heavy black leather of the best quality. A small zytel edge cover is also included.

Specifications:

Steel: Laminated Cos HRC 60
Blade length: 3.35" inch / 85 mm
Total length: 7.28” inch / 185 mm
Handle length: 3.94 inch / 100 mm
Handle scales: Thermorun

Blade thickness: 3.85 mm
Knife weight 84 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather & Zytel Edge Cover

Tang: Broad Tang

Finger Guard: Stainless Steel

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven Taiga Hunter TH2z Hunting Knife

- Made by Fällkniven -

Introduction:

The Taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. What is special about these knives is the very secure plastic sheath where a specially designed locking system ensures that the knife is properly locked when it is placed in the sheath. It works regardless of weather and wind, sand, or snow.

Specifications:

Steel: Laminated Cos HRC 60
Blade length: 3.31" inch / 84 mm
Total length: 7.40” inch / 188 mm
Handle length: 4.09” inch / 104 mm
Handle scales: Thermorun

Blade thickness: 4.5 mm
Knife weight 116 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Finger Guard: Stainless Steel

Tang: Broad Tang

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven Tre Kronor TK2L Hunting Knife

- Made by Fällkniven -

Introduction:

Tre Kronor, the Swedish knife series, offers a highly advanced technological solution combined with timeless Swedish design. As the result of a long development process, we are the first company in the world to be able to offer a laminated knife blade in 3G steel, edged with sintered steel, or powder steel. To this edge steel, we have added a resilient, anticorrosive steel which stabilizes the hard centre. This gives a rigid, strong blade that retains its edge extremely well. These knives are in the Swedish minimalist idiom, where form harmonizes with function. The result is an edged implement that the user will find an easy and accommodating knife — a world-beater from Sweden.

Tre Kronor #2
If price and performance are the deciding factors, then TK2 is the hands-down winner. The secure, comfortable grip and the powerful blade in laminated powder steel form a combination whose value is unparalleled in the world. It is a utility knife which one can rely on and which will perform for you through thick and thin. The knives are delivered in ordinary white box.

Specifications:

Steel: 3G HRC 62
Blade length: 3.94" inch / 100 mm
Total length: 8.46” inch / 215 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Thermorun

Blade thickness: 4,5 mm
Knife weight 185 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather 

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Full Tang

Fallkniven Tre Kronor TK2z Hunting Knife

- Made by Fällkniven -

Introduction:

Tre Kronor, the Swedish knife series, offers a highly advanced technological solution combined with timeless Swedish design. As the result of a long development process, we are the first company in the world to be able to offer a laminated knife blade in 3G steel, edged with sintered steel, or powder steel. To this edge steel, we have added a resilient, anticorrosive steel which stabilizes the hard centre. This gives a rigid, strong blade that retains its edge extremely well. These knives are in the Swedish minimalist idiom, where form harmonizes with function. The result is an edged implement that the user will find an easy and accommodating knife — a world-beater from Sweden.

Tre Kronor #2
If price and performance are the deciding factors, then TK2 is the hands-down winner. The secure, comfortable grip and the powerful blade in laminated powder steel form a combination whose value is unparalleled in the world. It is a utility knife which one can rely on and which will perform for you through thick and thin. The knives are delivered in ordinary white box.

Specifications:

Steel: 3G HRC 62
Blade length: 3.94" inch / 100 mm
Total length: 8.46” inch / 215 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Thermorun

Blade thickness: 4,5 mm
Knife weight 185 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Full Tang

FOX 500 Series Lockback Folding Knife

- Made by Fox Knives in Italy -

Design by: "Fox Knives"

Introduction:

An elegant pocket knife from Fox, which is characterized by its beautiful design and also by its high quality.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: stainless steel sandvik 12C27 HRC 56-58 
Blade length: 3.35" inch / 85 mm
Total length: 7.09” inch / 180 mm
Handle length: 3.74” inch / 95 mm
Handle scales: G10 black / G10 orange / G10 OD green

Blade thickness: 3 mm
Overall weight 70 gr.

Additional Information:

Blade Coating: satin

Handle: Hole for Safety Cord

Sheath: Included

FOX Alaskan Hunter FX-620 B Knife

- Made by Fox Knives in Italy -

Design by: "Russ Kommer"

Introduction:

As for the knife the finger hole helps to keep the knife under control in the harsh conditions that comes with hunting and camp duties, such as cold, wet and bloody conditions; while the blade helps in controlling the skinning and butchering of your big game animal.

Specifications:

Steel: BECUT stainless steel HRC 56-58 
Blade length:3.54" inch / 90 mm
Total length: 8.86” inch / 225 mm
Handle length: 5.31” inch / 135 mm
Handle scales: G10 Black

Blade thickness: 4 mm
Overall weight 195 gr.

Additional Information:

Leather Sheath: Included

Blade Coating: black Idroglider 

Clip: stainless steel 420J2B

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.

FOX Ferox FX-630 B Survival Knife

- Made by Fox Knives in Italy -

Design by: "Tommaso Rumici".

*Please request availibilty*

Introduction:

The Ferox is a light fixed blade of small dimensions, it is easy to carry with you, even on those occasions where you do not expect to need a knife. The straight handle has two G10 scales with nine grooves, occupied by as many o-rings. In addition to increasing the grip, the rubber rings serve to retain two hexagonal bits, of standard size, in their respective housings. By inserting them in the magnetic hole at the end of the handle, the user has two screwdrivers available, one flat head and one Philips, in that way he does not risk to damage the tip of the knife by trying to use it as such.

Specifications:

Steel: stainless steel N690Co HRC 58-60
Blade length: 3.64" inch / 90 mm
Total length: 8.26” inch / 210 mm
Handle length: 4.72” inch / 120 mm
Handle: G10 Black

Blade thickness: 4 mm
Overall weight 132 gr.

Additional Information:

Tool Set: Included
Leather Sheath: Included
Blade Coating: Physical Vapor Deposition (PVD)

PVD
(Physical Vapor Deposition) is a variety of vacuum deposition methods used to deposit thin films by the condensation of a vaporized form of the desired film material onto various workpiece surface. The coating method involves purely physical process such as high temperature vacuum evaporation with subsequent condensation.

FOX Flipper FX-302 or FX-302 ST or FX-302 G10 Folding Knife

- Made by Fox Knives in Italy -

Design by: "Jens Ansø".

Introduction:

The Flipper features a sculpted handle pattern often referred as ‘Ansø texture’.
A very comfortable handle and a curvy utility blade.

Jens Ansø:

“Ansø knives is about beauty, simplicity and purpose driven design”.

- Please select your desired version in the selection menu above -

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.54" inch / 90 mm
Total length: 8.07” inch / 205 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Titanium / Palisander wood / G10 black

Blade thickness: 4 mm
Overall weight 185 gr.

Additional Information:

Blade Coating: Satin / Black Idroglider stone washed

Clip: stainless steel 420J2B

Sheath: Included

Handle: Hole for Safety Cord

 

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.

FOX FX-515 W Terzuola Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bob Terzuola".

Introduction:

This knife is a “Every Day Carry” designed for daily utility and self defense. It is compact and strongly made with fine materials. Easy to carry with its convenient clip.

Bob Terzuola:

"I always design my knives to be functional but graceful. Utility is always the main factor in my designs as a knife should be perfectly useful and comfortable in a variety of positions and cutting situations”.

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.54" inch / 90 mm
Total length: 7.87” inch / 200 mm
Handle length: 4.33” inch / 110 mm
Handle scales: Ziricote wood

Blade thickness: 3 mm
Overall weight 110 gr.

Additional Information:

Blade Coating: satin

Sheath: Included

FOX FX-525 DB Damascus Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bob Terzuola".

Introduction:

Bob Terzuola:

"I always design my knives to be functional but graceful. The utility is always the main factor in my designs as a knife should be perfectly useful and comfortable in a variety of positions and cutting situations”.

Specifications:

Steel: Damasteel® Dense Twist ™l HRC 58-60 
Blade length: 3.35" inch / 85 mm
Total length: 7.87” inch / 200 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Bocote wood

Blade thickness: 3 mm
Overall weight 100 gr.

Additional Information:

Blade: Damascus

Sheath: Included

FOX FX-525 OL or  FX-525 B or FX-525 BE Terzuola Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bob Terzuola".

Introduction:

Bob Terzuola:

"I always design my knives to be functional but graceful. Utility is always the main factor in my designs as a knife should be perfectly useful and comfortable in a variety of positions and cutting situations”.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.35" inch / 85 mm
Total length: 7.87” inch / 200 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Olive wood / Bocote wood  / Birch wood  

Blade thickness: 3 mm
Overall weight 100 gr.

Additional Information:

Blade Coating: satin

FOX "FX-525 Ti BL" Terzuola Titanium Frame Lock Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bob Terzuola".

Introduction:

This knife is a “Every Day Carry” designed for daily utility and self defense. It is compact and strongly made with fine materials. Easy to carry with its convenient clip.

Bob Terzuola:

"I always design my knives to be functional but graceful. Utility is always the main factor in my designs as a knife should be perfectly useful and comfortable in a variety of positions and cutting situations”.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.35" inch / 90 mm
Total length: 7.87” inch / 200 mm
Handle length: 4.53” inch / 110 mm
Handle scales: Bead blasted gray titanium  / Anodized blue titanium 

Blade thickness: 3 mm
Overall weight: 3.53 oz / 100 gr.

Additional Information:

Blade: Stone washed

Handle: Hole for Safety Cord

Clip: Anodized titanium

FOX FX-F2017 40th Anniversary Collectors Folding Knife

- Made by Fox Knives in Italy -

Design by: "Fox Knives".

Introduction:

To celebrate their 40th anniversary, FOX Cutlery, revisited in a modern key their
first folding knives (594 Silver Collection).  Fox-Knives Italy 1977 - 2017.

Specifications:

Steel: M390 stainless steel HRC 59-61
Blade length: 3.35" inch / 85 mm
Total length: 7.48” inch / 190 mm
Handle length: 4.13” inch / 105 mm
Handle scales: Marble carbon fiber

Blade thickness: 3.5 mm
Overall weight 120 gr.

Additional Information:

Blade Coating: Satin

Clip: titanium

Bag: Included

FOX FX-F2017 D Folding 40th Anniversary Damascus Knife

- Made by Fox Knives in Italy -

Design by: "Fox Knives".

Introduction:

To celebrate their 40th anniversary, FOX Cutlery, revisited in a modern key their
first folding knives (594 Silver Collection). Fox-Knives 1977-2017.

Specifications:

Steel: Damasteel® DS93X™ Gysinge™ HRC 58-60
Blade length: 3.35" inch / 85 mm
Total length: 7.48” inch / 190 mm
Handle length: 4.13” inch / 105 mm
Handle scales: Marble carbon fiber

Blade thickness: 3.5 mm
Overall weight 123 gr.

Additional Information:

Blade Coating: Damascus

Clip: titanium

Gift Box: Included

FOX FX-F2017 R 40th Anniversary Collectors Folding Knife

- Made by Fox Knives in Italy -

Design by: "Fox Knives".

Introduction:

To celebrate their 40th anniversary, FOX Cutlery, revisited in a modern key their
first folding knives (594 Silver Collection).  Fox-Knives Italy 1977 - 2017.

Specifications:

Steel: M390 stainless steel HRC 59-61
Blade length: 3.35" inch / 85 mm
Total length: 7.48” inch / 190 mm
Handle length: 4.13” inch / 105 mm
Handle scales: Marble carbon fiber

Blade thickness: 3.5 mm
Overall weight 120 gr.

Additional Information:

Blade Coating: Black PVD

Clip: Black PVD titanium
Spacer: Black PVD titanium
Screws: Black PVD titanium

Bag: Included

FOX GECO FX-537 BR Tactical Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bastien Coves".

Introduction:

The FOX FX-537 GECO in one of the last FOX’s knife made in collaboration with the French custom knife maker Bastien Coves (Bastinelli Knives). The GECO is a small burly, tactical frame lock flipper, with an iconic ‘Basti­nelli’ design with high versatility.

Specifications:

Steel: stainless steel N690Co HRC 58-60
Blade length: 3.34" inch / 85 mm
Total length: 8.26” inch / 210 mm
Handle length: 4.92” inch / 125 mm
Handle scales: G10 black + titanium bronze

Blade thickness: 3 mm
Overall weight 129 gr.

Additional Information:

Blade Coating: black Idroglider stone washed

Clip: stainless steel 420J2B

FOX GECO FX-537 SW Tactical Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bastien Coves".

Introduction:

The FOX FX-537 GECO in one of the last FOX’s knife made in collaboration with the French custom knife maker Bastien Coves (Bastinelli Knives). The GECO is a small burly, tactical frame lock flipper, with an iconic ‘Basti­nelli’ design with high versatility.

Blade thickness: 3 mm
Overall weight 129 gr.

Additional Information:

Blade Coating: stone washed

Clip: stainless steel 420J2B