3 products
Cudeman 207-H Skelet-One Knife
Cudeman 207-H Skelet-One Knife
- Made by Cudeman in Spain -
Cudeman Skelet-One survival & hunting knife with Böhler blade.
With this outdoor and survival knife, you are also ideally equipped when traveling by motorcycle or car, because it covers many different tools.
Specifications:
Steel: BÖHLER N-695 / Hardeness: 59/60 HRC
Blade length: 3.346” inch / 85 mm
Total length: 7.874” inch / 200 mm
Handle length: 4.528” inch / 115 mm
Blade thickness: 4 mm
Knife weight 95 gr. / Kydex Sheath weigth 45 gr.
Description:
- Zipper on blade for improved grip
- 8 cm ruler.
- 6.5 / 9.5 / 12.5 / 16 / 13 / 10 / 8 / 7 / 5.5 mm fixed wrenches
- Hexagonal and octagonal 6.5 mm wrenches
- Adjustable clip in kydex sheath.
Fallkniven F1pro Survival Knife
Fallkniven F1pro Survival Knife
- Made by Fällkniven -
Introduction:
There are survival knives, and then there are real survival knives. Our basic models F1, S1 and A1 have served us since the end of the last century and due to their outstanding quality and durability, they will continue to do so for many years to come. Despite this, it has been our ambition to strive for continuous improvement and this has led to the new Pro series that takes the concept of survival knife to new heights. We started developing these impressive knives in 2010 and five years later we were finally able to offer three survival knives that set a new standard for how a real survival knife should look and work: the Pro series.
To put it simply – a knife is a blade and a handle. But if this important tool is to be both strong and keep the sharpness well, you must use really advanced materials and have a long and deep experience when it comes to being able to make knives for tough tasks. If you also want to claim to call a knife “professional”, you take on a great responsibility towards the user. The Pro series can do that. F1pro/elmax differs from its predecessor (F1pro/CoS) in the following important details:
The blade in laminated cobalt steel is replaced by a solid blade made of powder steel, Elmax SuperClean from Uddeholm, Sweden. It gives a blade that is 20% stronger and that keeps the sharpness significantly longer.
Compared to our first series of knives (F1, S1, A1):
The blades are consistently thicker, which gives an increased torsional rigidity – they can withstand even greater stresses than before.The tapered tang is wider and thicker and thus much stronger.The crossguard is made of stainless steel and permanently mounted on the tang.The convex edge has been refined for improved cutting properties.The newly developed zytel sheaths are strong and easy to adapt to the MOLLE system.
Of course, this knife ends up in a higher price range. But, given the outstanding quality, it is by no means overpriced. A professional survival knife should work in all weathers and we really mean all. It should also be comfortable, safe and convenient to handle whether it is used for fine or rough work, in desert heat or polar cold. Believe us, we have considered everything in the design of this stylish, advanced survival knife.
Specifications:
Steel: ELMAX Super Clean HRC 61-62
Blade length: 3.94" inch / 100 mm
Total length: 8.54” inch / 217 mm
Handle length: 4.615” inch / 117 mm
Handle scales: Thermorun
Blade thickness: 5 mm
Knife weight 176 gr.
Additional Information:
Edge: Convex
Sheath Included: Zytel
Handle: Lanyard Hole
Tang: Protruding Broad Tang
Blade Finish: Satin
FOX Ferox FX-630 B Survival Knife
FOX Ferox FX-630 B Survival Knife
- Made by Fox Knives in Italy -
Design by: "Tommaso Rumici".
*Please request availibilty*
Introduction:
The Ferox is a light fixed blade of small dimensions, it is easy to carry with you, even on those occasions where you do not expect to need a knife. The straight handle has two G10 scales with nine grooves, occupied by as many o-rings. In addition to increasing the grip, the rubber rings serve to retain two hexagonal bits, of standard size, in their respective housings. By inserting them in the magnetic hole at the end of the handle, the user has two screwdrivers available, one flat head and one Philips, in that way he does not risk to damage the tip of the knife by trying to use it as such.
Specifications:
Steel: stainless steel N690Co HRC 58-60
Blade length: 3.64" inch / 90 mm
Total length: 8.26” inch / 210 mm
Handle length: 4.72” inch / 120 mm
Handle: G10 Black
Blade thickness: 4 mm
Overall weight 132 gr.
Additional Information:
Tool Set: Included
Leather Sheath: Included
Blade Coating: Physical Vapor Deposition (PVD)
PVD
(Physical Vapor Deposition) is a variety of vacuum deposition methods used to deposit thin films by the condensation of a vaporized form of the desired film material onto various workpiece surface. The coating method involves purely physical process such as high temperature vacuum evaporation with subsequent condensation.