Fallkniven

Fallkniven GPs Gentleman's Folding Pocket Knife

- Made by Fällkniven -

Introduction:

Gentleman’s Pocket Knife appears to be a traditional, slightly old-fashioned pocket knife but if you look at it closely you will find nothing but modern materials and hi-tech solutions. We asked some professional hunters to look at a handmade sample of the GP, and their spontaneous review was: This is how a folding knife for hunting purposes should look like! Aside from personal preferences, we guess that many people will like the steel of this knife, our  laminated cobalt steel is unlikely sharp.

Other benefits include the reliable blade lock. A properly built liner-lock system is, in our opinion, the world’s strongest blade lock while still being easy to deal with. This technical solution also means that the knife is easy to clean. Rinse it under running warm water and let it dry for achieving best hygiene and function. As the strong blade bolt is threaded, you can adjust the blade inertia to suit your personal taste. The blade joint does not require lubrication. Oil and grease rather attract dust and dirt and this will increase rather than reduce wear.

It’s crazy beautiful, real stag for handle material, but it’s also very hard to get enough many nice looking pieces, which also are legitimate to buy and manufacture. This staghorn comes from a legal source of Sambar deer stag. Staghorn, as everyone knows, is a natural material that moves – it shrinks and swells due to humidity. In addition, when horn ages, it shrinks slightly, and there is not much to do about it. This means that small stress cracks around bolts and ends are already visible on the folding knives or will occur later on. This is not covered by any guarantee! This means that you can always return a knife and request the money back (for the knife) but it cannot be warranty repaired or replaced by another sample. Or as they state on an auction – sold in the existing condition!

If you already know the characteristics of the horn, you can look forward to a really nice sample with well-matched staghorn sides, AAA quality in terms of patterns. Unfortunately, we could not mount the traditional bracket, it simply didn’t fit on this special. Suede pouch included.

Please note:

There can be some variation in pattern and shades on the handles.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 3.07" inch / 78 mm
Total length: 7.09” inch / 180 mm
Handle length: 3.93” inch / 100 mm
Handle scales: Stag

Blade thickness: 3 mm
Knife weight 96 gr.

Additional Information:

Edge: Flat Ground

Pouch Included: Suede

Locking: Liner Lock

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven Tre Kronor TK3ic Folding Knife

- Made by Fällkniven -

Introduction:

Elegant and modern folding knives…

The folding knives in the Tre Kronor series are lightweight, secure, and beautiful.

The size of these folding knives is designed for active daily use; if you need a larger or stronger knife, we recommend any of our TK1 or TK2 models.

Tre Kronor #3 (Three Crowns)
Its beautiful and timeless design is the result of a long refinement process focused on the functionality concept of a folding knife. The TK3 is a safe and durable folding knife, with a blade made from our Elmax steel, representing the highest standard on today’s market. The blade locks into the open position with a very secure locking mechanism.
Each folding knife is handmade, which may result in slight variations. Many different versions of this model are planned for the future!!!

Please note:

There can be some variation in pattern and shades on the wooden handles.

Specifications:

Steel: ELMAX HRC 61-62
Blade length: 2.76" inch / 70 mm
Total length: 6.50” inch / 165 mm
Handle length: 3.746” inch / 95 mm
Handle scales: Desert Ironwood

Blade thickness: 2.5 mm
Knife weight 100 gr.

Additional Information:

Edge: Flat Ground

Handle: Lanyard Hole

Locking: Lock-Back

Fallkniven PXLx Work Horse Folding Knife

- Made by Fällkniven -

Introduction:

PXLx is a further development of our big seller PXLwh, the work horse in the PXL series. To make this knife even more versatile, we have added a strong pocket clip. It’s a robust, strong, lightweight and extremely reliable folding knife in the larger size range. The blade is made in our laminated cobalt special steel and it brings an unlikely sharpness that will last longer than you think. The blade locks in open position with a proven liner-lock system. Because of the small thumbstud on the blade, it folds easily using one hand only. That is very useful when you have to stick to yourself or another thing with the opposite hand. The handle is also made with a material called grilon and is considered to be among the most reliable of all plastics.

Specifications:

Steel: ELMAX HRC 60
Blade length: 3.46" inch / 88 mm
Total length: 7.83” inch / 199 mm
Handle length: 4.37” inch / 111 mm
Handle scales: Black Textured Grilon

Blade thickness: 3.5 mm
Knife weight 134 gr.

Additional Information:

Edge: Flat Ground

Locking: Liner Lock

Handle: Hole for Lanyard

Fallkniven PXLbm Folding Pocket E.D.C. Knife

- Made by Fällkniven -

Introduction:

PXL is a modern, slightly larger folding knife for daily use (called EDC or every day carry). The adjustable blade is made in a stainless 3G laminated powder steel at a hardness of HRC 62. It gives an edge which will keep its sharpness extremely well. The handle is in stainless steel and indestructible micarta. The safe and strong liner bladelock allows you to open and close the blade using one hand only. PXL comes with a strong, removable clip which offers a safe, fast and comfortable access to the knife.

Specifications:

Steel: 3G HRC 62
Blade length: 3.46" inch / 88 mm
Total length: 7.83” inch / 199 mm
Handle length: 4.37” inch / 111 mm
Handle scales: Black Micarta

Blade thickness: 3.5 mm
Knife weight 182 gr.

Additional Information:

Edge: Flat Ground

Locking: Liner Lock

Handle: Hole for Lanyard

Fallkniven GPbm Gentleman's Folding Pocket Knife

- Made by Fällkniven -

Introduction:

Gentleman’s Pocket Knife appears to be a traditional, slightly old-fashioned pocket knife but if you look at it closely you will find nothing but modern materials and hi-tech solutions. We asked some professional hunters to look at a handmade sample of the GP, and their spontaneous review was: This is how a folding knife for hunting purposes should look like! Aside from personal preferences, we guess that many people will like the steel of this knife, our  laminated cobalt steel is unlikely sharp.

Other benefits include the reliable blade lock. A properly built liner-lock system is, in our opinion, the world’s strongest blade lock while still being easy to deal with. This technical solution also means that the knife is easy to clean. Rinse it under running warm water and let it dry for achieving best hygiene and function. As the strong blade bolt is threaded, you can adjust the blade inertia to suit your personal taste. The blade joint does not require lubrication. Oil and grease rather attract dust and dirt and this will increase rather than reduce wear. The shackle at the end of the handle allows you to tie the knife – you wouldn’t like to lose this beauty! The GPbm is made of Lam. CoS steel and with a handle of black micarta. Micarta is a composite consisting of phenolic resin (a thermosetting resin) and, for example, canvas (linen or cotton) or paper. If canvas fabric is used, a structure emerges when the knife handle is shaped, using paper you can often see different layers in this material. Suede pouch included.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 3.07" inch / 78 mm
Total length: 7.09” inch / 180 mm
Handle length: 3.93” inch / 100 mm
Handle scales: Black Micarta

Blade thickness: 3 mm
Knife weight 96 gr.

Additional Information:

Edge: Flat Ground

Pouch Included: Suede

Locking: Liner Lock

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven U4 Folding Knife

- Made by Fällkniven -

Introduction:

Being well dressed is a concern no matter where you are. Clothes should fit the circumstances, the situation, needs, and a person’s expectations. The same goes with knives! Having the “right” knife for any situation usually means having several to choose from. And with all the different local laws confusing the matter, one must be very careful with the knife they choose.

At first glance, the Mod. U4 is a seemingly modest penknife. No one would give it a second look when you pulled it from your pocket to peel the apple, open that letter, or cut a string. But looking closer one notices that the blade consists of high-grade powder steel with an edge that stays sharp for a very long time. Holding the knife in your hand you would also notice the lightweight (22 grams) design. The blade locks for added safety and the symmetrical design allows for use by both right and left handers. The Mod. U4 is an excellent knife for carrying in your pocket, giving you a strong tool in a small package. Someone described the knife as resembling a wolf’s tooth and there just may be something to that. You might say the Mod U4 is “A Wolf in Sheep’s Clothing”.

Specifications:

Steel: ELMAX HRC 62
Blade length: 2.09" inch / 53 mm
Total length: 4.88” inch / 124 mm
Handle length: 2.76” inch / 70 mm
Handle scales: Black Grilon

Blade thickness: 2.25 mm
Knife weight 29 gr.

Additional Information:

Edge: Flat Ground

Handle: Lanyard Hole

Locking: Lock-Back

SGPS: Super Gold Powder steel

Fallkniven Tre Kronor TK4c Folding Knife

- Made by Fällkniven -

Introduction:

Elegant, modern folding knives
The folding knives in the Tre Kronor series are lightweight, safe and beautiful. The new edge steel, 3G, is a revolutionary laminated anticorrosive steel, with a core comprising the well-proven powder steel Super Gold Powder Steel (SGPS) and sides of VG2.

The size of the folding knives is adapted for active everyday use and if a larger or stronger knife is needed, we recommend either of our sheath knives TK1 or TK2.

Tre Kronor #4
TK4 is a workhorse with clean lines that combines lightness with strength. The slim handle in rigid composite material is both lightweight and strong, and completely resistant to corrosion and solvents. With nail nicks in both sides of the blade, the knife is completely symmetrical and as easy to handle for both left-handed and right-handed users. The well-proven locking mechanism fixes the blade securely in its open position.

Specifications:

Steel: ELMAX HRC 62
Blade length: 2.76" inch / 70 mm
Total length: 6.50” inch / 165 mm
Handle length: 3.74” inch / 95 mm
Handle scales: Zytel

Blade thickness: 2.5 mm
Knife weight 100 gr.

Additional Information:

Edge: Flat Ground

Handle: Lanyard Hole

Locking: Lock-Back

Sheath Included: Cordura

Fallkniven GPdi Gentleman's Folding Pocket Knife 

- Made by Fällkniven -

Introduction:

Gentleman’s Pocket Knife appears to be a traditional, slightly old-fashioned pocket knife but if you look at it closely you will find nothing but modern materials and hi-tech solutions. We asked some professional hunters to look at a handmade sample of the GP, and their spontaneous review was: This is how a folding knife for hunting purposes should look like! Aside from personal preferences, we guess that many people will like the steel of this knife, our  laminated cobalt steel is unlikely sharp.

Other benefits include the reliable blade lock. A properly built liner-lock system is, in our opinion, the world’s strongest blade lock while still being easy to deal with. This technical solution also means that the knife is easy to clean. Rinse it under running warm water and let it dry for achieving best hygiene and function. As the strong blade bolt is threaded, you can adjust the blade inertia to suit your personal taste. The blade joint does not require lubrication. Oil and grease rather attract dust and dirt and this will increase rather than reduce wear. The shackle at the end of the handle allows you to tie the knife – you wouldn’t like to lose this beauty! The GP knife is made of stainless steel and Desert Ironwood. Desert ironwood is a very durable, heavy and hard wood that, due to its high density, can be a little difficult to process and it also sinks in water. Suede pouch included.

Please note:

There can be some variation in pattern and shades on the wooden handles.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 3.07" inch / 78 mm
Total length: 7.09” inch / 180 mm
Handle length: 3.93” inch / 100 mm
Handle scales: Desert Iron Wood

Blade thickness: 3 mm
Knife weight 96 gr.

Additional Information:

Edge: Flat Ground

Pouch Included: Suede

Locking: Liner Lock

Laminated CoS: A newly developed high alloy cobalt-special steel