Fallkniven

Fallkniven Tungsten Carbine S1xb  Knife

- Made by Fällkniven -

Introduction:

Your X-knife is the strongest, sharpest and safest stainless steel knife in production. If your life is in danger, you can always rely on your X-knife. It is designed to withstand all the stresses applied by the human hand, which means that it is virtually indestructible. It assumes, however, that you are careful with the knife and that it is used  as intended, namely as a sharp precision tool. A few words about the all-black version: This surface is the hardest we have ever encountered. Although we really tried to wear down the black coating with the toughest, driest curly birch we could find, we never succeeded in getting holes in this extremely hard, durable surface. Still, we cannot guarantee that it will stay for time and eternity, after all, the blade can be ground and certainly a diamond or ceramic stone will bite on the surface.

Also for example a grain of sand can scratch or leave a mark in the coating. The hardness is at 2400 HV (Vickers) or around HRC 83. They have put a lot of energy into designing a safe knife sheath, which is actually where the knife will spend most of its time. The design of the sheath determines the access to the knife, and here we have really put all our efforts in order to get a safe sheath that allows easy access to the knife. The sheath has both a transport lock (the folding bracket with a strap) and a working safety detail that allows the knife to be in place until you decide to use it. It is a bit a belt-and-braces approach, but we like putting safety first – a lost knife is of no use. The transport lock will therefore allow the knife to be fastened tip-up or tip-down on the body or on your equipment without any risk.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 5.20" inch / 132 mm
Total length: 9.80” inch / 249 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 6 mm
Knife weight 290 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Full Tang

Blade: Black Coated

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven Kolt KKLz Hunting Knife

- Made by Fällkniven -

Introduction:

The Kolt Knife is probably Fallkniven´s best dry meat knife, no other knife is as good as the KK when it comes to cutting thin slices of a piece of dried or smoked meat. Of course, the knife can be used for a lot more and the simple reason is the handy size. In its original form the Kolt Knife had a very simple blade cover. However, many fans of the KK knife today were interested in a traditionally shaped leather sheath. We are now offering the KK frock knife with well-fitting sheath made of heavy black leather of the best quality. A small zytel edge cover is also included.

Specifications:

Steel: Laminated Cos HRC 60
Blade length: 3.35" inch / 85 mm
Total length: 7.28” inch / 185 mm
Handle length: 3.94 inch / 100 mm
Handle scales: Thermorun

Blade thickness: 3.85 mm
Knife weight 84 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather & Zytel Edge Cover

Tang: Broad Tang

Finger Guard: Stainless Steel

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven Tre Kronor TK6z Hunting Knife

- Made by Fällkniven -

Introduction:

Tre Kronor, the Swedish knife series, offers a highly advanced technological solution combined with timeless Swedish design. These knives are in the Swedish minimalist idiom, where form harmonises with function. The result is an edged implement that the user will find an easy and accommodating knife — a world-beater from Sweden. If there is a quality that hunters appreciate very much, I would suggest the edge retention! This blade is made of stainless laminate powdersteel which is combining both strength and edge retention. Most truly, you have never before handled a knife which holds up an edge better than this model. When the sharpess finally is gone, you restore the edge by using a fine, flat diamond whetstone. You maintain your good knife by keeping it clean and dry and, should it get dirty, use some warm water and washing-up liquid, wipe off and let dry.

Specifications:

Steel: 3G HRC 62
Blade length: 3.15" inch / 80 mm
Total length: 6.89” inch / 175 mm
Handle length: 3.74” inch / 95 mm
Handle scales: Thermorun

Blade thickness: 4,5 mm
Knife weight 119 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Protruding Broad Tang

Fallkniven Tre Kronor TK6L Hunting Knife

- Made by Fällkniven -

Introduction:

Tre Kronor, the Swedish knife series, offers a highly advanced technological solution combined with timeless Swedish design. These knives are in the Swedish minimalist idiom, where form harmonises with function. The result is an edged implement that the user will find an easy and accommodating knife — a world-beater from Sweden. If there is a quality that hunters appreciate very much, I would suggest the edge retention! This blade is made of stainless laminate powdersteel which is combining both strength and edge retention. Most truly, you have never before handled a knife which holds up an edge better than this model. When the sharpess finally is gone, you restore the edge by using a fine, flat diamond whetstone. You maintain your good knife by keeping it clean and dry and, should it get dirty, use some warm water and washing-up liquid, wipe off and let dry.

Specifications:

Steel: 3G HRC 62
Blade length: 3.15" inch / 80 mm
Total length: 6.89” inch / 175 mm
Handle length: 3.74” inch / 95 mm
Handle scales: Thermorun

Blade thickness: 4,5 mm
Knife weight 119 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather 

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Protruding Broad Tang

Fallkniven WM1L Hunting Knife

- Made by Fällkniven -

Introduction:

More than half the world’s population is female – and yet model WM is probably the first sheath knife designed from scratch to suit the hands and requirements of WoMen. The non-aggressive blade design, the safe well-tailored handle, the robust leather sheath – everything breathes functionality. The improved convex ground blade provides a blade profile which cuts with ease, while giving a sharp edge suitable for whittling. The comfortable, ergonomically designed handle gives a good, secure grip even in wet or cold hands and enables full control of the edge positioning. The knife is equipped with a hygienic zytel sheath or a well sewn leather sheath.

Specifications:

Steel: Laminated VG7 HRC 60
Blade length: 3.03" inch / 77 mm
Total length: 6.89” inch / 175 mm
Handle length: 3.86 inch / 98 mm
Handle scales: Thermorun

Blade thickness: 3.5 mm
Knife weight 77 gr.

Additional Information:

Edge: ICE (Improved Convex Edge)

Sheath Included: Leather

Tang: Broad Tang

Fallkniven Taiga Hunter TH2z Hunting Knife

- Made by Fällkniven -

Introduction:

The Taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. What is special about these knives is the very secure plastic sheath where a specially designed locking system ensures that the knife is properly locked when it is placed in the sheath. It works regardless of weather and wind, sand, or snow.

Specifications:

Steel: Laminated Cos HRC 60
Blade length: 3.31" inch / 84 mm
Total length: 7.40” inch / 188 mm
Handle length: 4.09” inch / 104 mm
Handle scales: Thermorun

Blade thickness: 4.5 mm
Knife weight 116 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Finger Guard: Stainless Steel

Tang: Broad Tang

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven Taiga Forester TF2z Hunting Knife

- Made by Fällkniven -

Introduction:

The Taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. What is a special about these knives is the very secure plastic sheath where a specially designed locking system ensures that the knife is properly locked when it is placed in the sheath. It works regardless of weather and wind, sand or snow.

Specifications:

Steel: Laminated Cos HRC 60
Blade length: 4.72" inch / 120 mm
Total length: 9.25” inch / 235 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Thermorun

Blade thickness: 5 mm
Knife weight 120 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Finger Guard: Stainless Steel

Tang: Broad Tang

Laminated CoS: A newly developed high alloy cobalt-special steel

Additional Information:

Edge: Convex

Sheath Included: Zytel

Finger Guard: Stainless Steel

Tang: Full Tang

Laminated CoS: A newly developed high alloy cobalt-special steel