FOX Knives

FOX Trapper FX-132 MGT Bushcraft Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

Introduction:

The Fox Trapper Outdoor Knife is the perfect companion for all camping and hunting activities. The intricately crafted leg sheath gives this knife a safe and easily accessible safekeeping place. So you can not lose this wonderful bushcraft knife.

Specifications:

Steel: N690Co stainless steel HRC 58-60
Blade length: 6.69" inch / 170 mm
Total length: 11.81” inch / 300 mm
Handle length: 5.12” inch / 130 mm
Handle scales: Canvas Micarta OD Green 

Blade thickness: 5 mm
Overall weight 360 gr.

Additional Information:

Blade Coating: Black Idroglider

Leather Sheath: Included

Handle: Hole for Safety Cord

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.

FOX "Rimor FX-9CM07 OD" Military Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives"

Introduction:

We have in our collection this a very sturdy Military knife from Fox-Knives. The knife has been specially designed for heavy use. A Full Tang knife, which leaves nothing to be desired in the outdoor area.

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 6.89" inch / 175 mm
Total length: 12.01” inch / 305 mm
Handle length: 5.12” inch / 130 mm
Handle scales: FRN® OD green

Blade thickness: 6 mm
Overall weight 360 gr.

Additional Information:

Blade Coating: Black Idroglider

Leather Sheath: Included

Handle: Lanyard Hole

Idroglider:

Special nonstick coating made of PTFE that ensures long life and rust resistance.

FOX Bushman FX-609 OD Bushcraft Knife

- Made by Fox Knives in Italy -

- Design by: "FOX Knives" -

Introduction:

The Fox Bushman knife, is an incredibly strong bushcraft knife that is almost unbreakable and can withstand the toughest challenges. The Bushman leather sheath can be used both in vertical and horizontal position thanks to the separable loops.

Specifications:

Steel: D2 stainless steel HRC 59-61
Blade length: 6.30" inch / 160 mm
Total length: 11.42” inch / 290 mm
Handle length: 5.12” inch / 130 mm
Handle scales: Canvas Micarta OD Green

Blade thickness: 5 mm
Overall weight 370 gr.

Additional Information:

Blade Coating: Black Idroglider stone washed

Leather Sheath: Included

Handle: Hole for Safety Cord

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.

FOX GECO FX-537 SW Tactical Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bastien Coves".

Introduction:

The FOX FX-537 GECO in one of the last FOX’s knife made in collaboration with the French custom knife maker Bastien Coves (Bastinelli Knives). The GECO is a small burly, tactical frame lock flipper, with an iconic ‘Basti­nelli’ design with high versatility.

Blade thickness: 3 mm
Overall weight 129 gr.

Additional Information:

Blade Coating: stone washed

Clip: stainless steel 420J2B

FOX FKMD PREDATOR Spetsnaz FX-G4B Military Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

Introduction:

Developed in collaboration with: DENDRA

The Fox Predator, is a beautifully designed combat knife, which convinces on the one hand by its beautiful lines, but also by its very high quality workmanship.

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 6.69" inch / 170 mm
Total length: 11.81” inch / 300 mm
Handle length: 5.12” inch / 130 mm
Handle scales: FORPRENE® black

Blade thickness: 6 mm
Overall weight 300 gr.

Additional Information:

Blade Coating: Black Idroglider

Handle: Hole for Lanyard

Blade: Plain Blade

Sheath: NYLON 1000D with MOLLE system

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.

FOX FKMD Parang FX-0107153 Bushcraft Survival Knife

- Made by Fox Knives in Italy -

Design by: "Alfredo Doricchi".

Introduction:

With this sturdy Bushcraft knife Fox-Knives has brought a wonderful all-rounder on the market. The Fox Parang Bushcraft comes with a in a cordura MOLLE-compatible belt sheath. Fox has also added a survival kit with several useful items such as a razor blade, sewing kit, wire saw, fire-steel and many other useful items. This set comes in a lockable box with nylon sheath. It is MOLLE-compatible and can be placed on the front of the sheath of the knife, or for example on a MOLLE-compatible backpack.

Alfredo Doricchi:

“All-around field knife, suitable to perform all tasks necessary for survival and outdoor activities, from cutting to woodworking, from food preparation to the skinning of a prey, to digging a hole. It is not a weapon, it is a survival tool. The strong blade is suitable for chopping and heavy batoning.”

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 6.69" inch / 170 mm
Total length: 11.81” inch / 300 mm
Handle length: 5.12” inch / 130 mm
Handle scales: FORPRENE® coyote tan

Blade thickness: 6 mm
Overall weight 340 gr.

Additional Information:

Blade Coating: Cerakote™ black

Handle: Hole for Lanyard

Blade: Additional teeth on the spine

Sheath: Included

Survival kit included with the sheath.

Cerakote™
It Is a ceramic based finish that can be applied to metals, enhance a number of physical performance properties including abrasion/wear resistance, corrosion resistance, chemical resistance, impact strength and hardness.

FOX FKMD Sputnik 10 FX-810 B Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

Introduction:

The new series Sputnik especially shines with particularly high use value and an extremely secure grip. The rubbery Forprene handle the Sputnik models are to handle even when wet or cold very comfortable and safe, including the numerous depressions and grooves to play their part. The small built-in guard also carries an eyelet as the glass breaker in the grip end, whereby the Sputnik example can be tied also to a stick. The blade of N690Co is Cerakote-coated and optimally dimensioned with thickness from 5mm to combine cutting potential and stability. The highly functional symmetrical sheath is made of fiberglass and is located in a MOLLE compatible nylon holder with belt loop and detachable leg straps.

- Glass breaker tempered stainless steel 420 -

Developed in collaboration with: MEMOTEK

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 4.72" inch / 120 mm
Total length: 9.65” inch / 245 mm
Handle length: 4.92” inch / 125 mm
Handle scales: TPR black

Blade thickness: 5 mm
Overall weight 215 gr.

Additional Information:

Blade Coating: Cerakote™ black

Sheath: Included with MOLLE system

Handle: Anodized aluminum cap and wrench key included

Cerakote™
It Is a ceramic based finish that can be applied to metals, enhance a number of physical performance properties including abrasion/wear resistance, corrosion resistance, chemical resistance, impact strength and hardness.

FOX FKMD Sputnik 13 FX-813B Military Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

* Please request availability *

Introduction:

The new series Sputnik especially shines with particularly high use value and an extremely secure grip. The rubbery Forprene handle the Sputnik models are to handle even when wet or cold very comfortable and safe, including the numerous depressions and grooves to play their part. The small built-in guard also carries an eyelet as the glass breaker in the grip end, whereby the Sputnik example can be tied also to a stick. The blade of N690Co is Cerakote-coated and optimally dimensioned with thickness from 5mm to combine cutting potential and stability. The highly functional symmetrical sheath is made of fiberglass and is located in a MOLLE compatible nylon holder with belt loop and detachable leg straps.

- Glass breaker tempered stainless steel 420 -

Developed in collaboration with: MEMOTEK

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 6.02" inch / 153 mm
Total length: 11.02” inch / 280 mm
Handle length: 5.00” inch / 127 mm
Handle scales: TPR black

Blade thickness: 5 mm
Overall weight 245 gr.

Additional Information:

Blade Coating: Cerakote™ black

Sheath: Included with MOLLE system

Handle: Anodized aluminum cap and wrench key included

Cerakote™
It Is a ceramic based finish that can be applied to metals, enhance a number of physical performance properties including abrasion/wear resistance, corrosion resistance, chemical resistance, impact strength and hardness.

FOX Rimor FX-9CM07 Military Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives"

Introduction:

We have in our collection this a very sturdy Military knife from Fox-Knives. The knife has been specially designed for heavy use. A Full Tang knife, which leaves nothing to be desired in the outdoor area.

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 6.89" inch / 175 mm
Total length: 12.01” inch / 305 mm
Handle length: 5.12” inch / 130 mm
Handle scales: FRN® black

Blade thickness: 6 mm
Overall weight 360 gr.

Additional Information:

Blade Coating: Stone washed

Leather Sheath: Included

Handle: Lanyard Hole

FOX Forest Collection 612 Full Tang Hunting Knife

- Made by Fox Knives in Italy -

Design by: "Fox Knives".

Introduction:

The Fox Forest Collection 612 full tang knife, is a very sturdy and robust hunting knife. In this beautiful hunting knife, the back of the blade was equipped with a saw. The high-quality blade is made of the finest 440C steel, which withstands almost all demands in use. The rockwell hardeness is 57-59 HRC.

Specifications:

Steel: Stainless steel 440C HRC 57-59 
Blade length: 6.30" inch / 160 mm
Total length: 11.22” inch / 285 mm
Handle length: 4.92” inch / 125 mm
Handle scales: Pakkawood

Blade thickness: 4 mm
Overall weight 270 gr.

Additional Information:

Blade Coating: Satin

Blade: Full-Tang

Bolsters: 430 stainless steel

Leather Sheath: Included

Blade: Saw on the Spine

FOX Pheasant BR-011F Browning Feather Folding Knife

- Made by Fox Knives in Italy -

Design by: "Russ Kommer".

Introduction:

The Pheasant knife has a classic design with an elegant inlayed pheasant feather into the handle scales, meant to collectors or hunters! The classic blade is the result of many years of hunting in Alaska! As rugged as the men and women that carry it!

Russ Kommer:

“When I design any knife It has to have flow to the design! Once I have the right flow for the knife it will create its own beauty lines! My knives even in a tactical model have beauty lines! (Nice clean grinds, rounded to fit your hand this creates flow!) I use the three F process! Fit, Finish, Function”.

Steel: Stainless steel sandvik 12C27 HRC 56-58 
Blade length: 3.54" inch / 90 mm
Total length: 8.46” inch / 215 mm
Handle length: 4.92” inch / 125 mm
Handle scales: Resin + pheasant feather

Blade thickness: 3 mm
Overall weight 130 gr.

Additional Information:

Blade Coating: satin

Bolsters: 430 stainless steel

Sheath: Included

FOX Parong Karambit FX-637 Fixed Blade Knife

- Made by Fox Knives in Italy -

Design by: "Richard Derespina".

Introduction:

Richard Derespina:

“I have been making Karambits since 1999. My design is ergonomic and geometry”.

- Please select your desired version from the drop-down menu above -

 

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.74" inch / 95 mm
Total length: 8.86” inch / 225 mm
Handle length: 5.12” inch / 130 mm
Handle scales: G10 black or Olive wood  

Blade thickness: 4 mm
Overall weight 190/231 gr.

Additional Information:

Blade Coating: black Idroglider or Satin

Back Ring: N690Co stainless steel

Sheath: Included                

FOX European Hunter 596 Full Tang Hunting Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

* Please request availability *

Introduction:

With the European Hunter knife Fox-Knives has developed a wonderful hunting knife, which can be used for almost all operations in the hunting and outdoor sector. The 440C steel full tang blade is nearly unbreakable and impresses with its great design.

- Please select your desired version in the selection menu above -

Specifications:

Steel: stainless steel 440C HRC 57-59 
Blade length: 2.95" inch / 75 mm
Total length: 7.48” inch / 190 mm
Handle length: 4.92” inch / 125 mm
Handle scales: Staghorn or Pakkawood  

Blade thickness: 3 mm
Overall weight 110 / 170 gr.

Additional Information:

Blade Coating: Satin

Leather Sheath: Included

Handle: Hole for Safety Cord

Bolsters: 430 stainless steel (596 CE) / Nickel silver (596 PW)

FOX Combat Jungle FX-133 MGT Bushcraft Hunting Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives"

*Please request availability*

Introduction:

Here we offer a very robust bushcraft, outdoor and survival knife from Fox-Knives. The blade is made of high quality and durable Böhler-N690 steel, which has a Rockwell hardness of 58°-60° HRC. The full tang construction guarantees a very high stability. The complex Cordura scabbard guarantees a secure hold on the thigh.

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 7.48" inch / 190 mm
Total length: 12.60” inch / 320 mm
Handle length: 5.12” inch / 130 mm
Handle scales: Canvas Micarta OD Green 

Blade thickness: 6 mm
Overall weight 365 gr.

Additional Information:

Blade Coating: Black Idroglider

Leather Sheath: Included

Handle: Hole for Safety Cord

 

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.

FOX Octopus Vulgaris FX-510 or FX-510 OD or FX-510 W Hunting Knife

- Made by Fox Knives in Italy -

Design by: "Tommaso Rumici".

Introduction:

Tommaso Rumici:

“Drawing the Octopus, I wanted to create a knife versatile enough to be interesting for various types of FOX costumers: sporting, hunting and military. The result is, in my opinion, an ideal compromise between portability and performance: a knife that will never be too big or heavy to have it with you when you need it.”

- Please select your desired version in the selection menu above -

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 4.53" inch / 115 mm
Total length: 9.45” inch / 240 mm
Handle length: 4.92” inch / 125 mm
Handle scales: G10 black / G10 OD green / Ziricote wood

Blade thickness: 4 mm
Overall weight 190 gr.

Additional Information:

Leather Sheath: Included

Blade Coating: Stone washed

Handle: Hole for safety Cord

FOX Core Scandi FX-606 or FX-606 OD Hunting Knife

- Made by Fox Knives in Italy -

Design by: "Jesper Voxnæs".

Introduction:

Jesper Voxnæs:

“My knife designs are obviously with the Nordic lines and feel. A clean functional almost minimalistic expression. All about the function of the tool”.

- Please select your desired version in the selection menu above -

Specifications:

Steel: BECUT stainless steel HRC 56-58 
Blade length: 3.94" inch / 100 mm
Total length: 8.86” inch / 225 mm
Handle length: 4.92” inch / 125 mm
Handle scales: PP+TPE (polypropylene + thermorubber) Black or OD Green

Blade thickness: 4 mm
Overall weight 150 gr.

Additional Information:

Leather Sheath: Included

Blade Coating: Stone washed

Handle: Hole for safety Cord

FOX GECO FX-537 BR Tactical Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bastien Coves".

Introduction:

The FOX FX-537 GECO in one of the last FOX’s knife made in collaboration with the French custom knife maker Bastien Coves (Bastinelli Knives). The GECO is a small burly, tactical frame lock flipper, with an iconic ‘Basti­nelli’ design with high versatility.

Specifications:

Steel: stainless steel N690Co HRC 58-60
Blade length: 3.34" inch / 85 mm
Total length: 8.26” inch / 210 mm
Handle length: 4.92” inch / 125 mm
Handle scales: G10 black + titanium bronze

Blade thickness: 3 mm
Overall weight 129 gr.

Additional Information:

Blade Coating: black Idroglider stone washed

Clip: stainless steel 420J2B