4.370inch - 4.724inch

Fallkniven "F2z" Pescador Fish Fillet Knife

- Made by Fällkniven -

Introduction:

This knife has a broad range of use. The short, fairly slender blade works well for filleting, cutting and cleaning fish. The short blade makes the knife  a favourite in the kitchen. It cuts anything quickly and precisely.

F2, F3 and F4 are a concept of high-quality knives intended for opening, butchering and cleaning fish. They are based on the well shaped, secure F handle, and to that we have developed three blade shapes, each adapted to its special purpose. Unlike many other manufacturers we persist in using really good edge steel and even if it leads to products that are 5 or 10 times more expensive, we feel that the concept is right. A cheap dressing knife is characterised by poor edge retention, leading to it fairly soon being honed to destruction, while a knife from us can be used for decades. Not only does this lead to good overall economy, but it also offers satisfaction and safety at work. Naturally, it should not be put away after the hunting, but can also serve its purpose in the kitchen. The knives are supplied with a zytel sheath. The best, simplest and quickest way to sharpen them is with a diamond whetstone or diamond sharpening steel.

Specifications:

Steel: Laminated VG10 HRC 59
Blade length: 4.33" inch / 110 mm
Total length: 9.06” inch / 230 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Thermorun

Blade thickness: 2.5 mm
Knife weight 89 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Broad Tang

Blade Finish: Satin

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven F3z Carnicero Butcher Knife

- Made by Fällkniven -

Introduction:

This is the perfect dressing and skinning knife! The form of the blade is ideal to skin somewhat larger game and then open it before hanging. Since the edge can be made thin without losing in strength, the edge will easily part the thickest skin, which the user should perhaps bear in mind – to avoid mishaps.

F2, F3 and F4 are a concept of high-quality knives intended for opening, butchering and cleaning fish. They are based on the well shaped, secure F handle, and to that we have developed three blade shapes, each adapted to its special purpose. Unlike many other manufacturers we persist in using really good edge steel and even if it leads to products that are 5 or 10 times more expensive, we feel that the concept is right. A cheap dressing knife is characterised by poor edge retention, leading to it fairly soon being honed to destruction, while a knife from us can be used for decades. Not only does this lead to good overall economy, but it also offers satisfaction and safety at work. Naturally, it should not be put away after the hunting, but can also serve its purpose in the kitchen. The knives are supplied with a zytel sheath. The best, simplest and quickest way to sharpen them is with a diamond whetstone or diamond sharpening steel.

Specifications:

Steel: Laminated VG10 HRC 59
Blade length: 5.12" inch / 130 mm
Total length: 9.84” inch / 250 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Thermorun

Blade thickness: 2.5 mm
Knife weight 101 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Broad Tang

Blade Finish: Satin

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven Frey NL4L Hunting Knife (New Steel Quality VG7 Wolf)

- Made by Fällkniven -

Introduction:

Specifications:

Steel: VG7 Wolf HRC 59
Blade length: 5.12" inch / 130 mm
Total length: 9.61” inch / 244 mm
Handle length: 4.49” inch / 114 mm
Handle scales: Leather

Blade thickness: 5 mm
Knife weight 199 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather 

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Protruding Protruding Broad Tang

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven S1pro Survival Knife

- Made by Fällkniven -

Introduction:

S1pro – Laminated CoS steel
There are basic survival knives, and there are survival knives for the professional. Our original models of the F1, S1 and A1 have provided exceptional service for more than 20 years. And due to their outstanding quality and durability they will continue to perform for many more years. Nevertheless our drive to continually improve our knives has led us to develop the new Pro Series. The Pro Series are survival knives of near-unimaginable quality, durability and performance.

We began developing the Pro Series knives back in 2010 and finally five years later, we could offer three amazing Pro Series survival knives that are the new world standard for survival knife performance and manufacturing.

Simply put, a knife is a blade and a handle. To remain strong and stay sharp the knife must be made of high quality materials. But if the claim is made that a knife is “professional” then the knife and its builder has a responsibility to the user to raise the bar far above what is common. The Pro Series truly is professional.

Compared to their predecessors, the Pro series of F1, S1 and A1 differs in the following important areas:

1. The original laminated VG10 steel is upgraded to a laminate cobalt steel (lam. CoS) blade that ensures a durable edge and improved edge retention.
2. The blades are thicker increasing the torsional rigidity so the knives will withstand even greater external forces.
3. The full-length tapered tang is wider and thicker and therefore significantly stronger.
4. The crossguard is now made of stainless steel and permanently welded to the tang.
5. The convex blade edge has been refined to improve its cutting properties.
6. The zytel sheaths are redesigned, more durable, and better suited for the Molle attachment system.

Understandably these knives fall into a higher price category. However, considering the unparalleled quality they are by no means over priced.

A professional survival knife must perform in all weather with no exceptions. The professional survival knife must be comfortable and safe to handle for both fine and rough work in summer heat and winter cold. We at Fallkniven have considered every design aspect of these superb professional survival knifes.

Specifications:

Steel: Laminated Cobalt Steel HRC 60
Blade length: 5.12" inch / 130 mm
Total length: 9.72” inch / 247 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 6 mm
Knife weight 257 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Finger Guard: Stainless Steel

Blade: Satin Finish

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven S1pro10 Survival Knife

- Made by Fällkniven -

Introduction:

This is the standard edition of the S1pro. Only knife, Zytel sheath and our regular 10 year warranty. There are basic survival knives, and there are survival knives for the professional. Our original models of the F1, S1 and A1 have provided exceptional service for more than 20 years. And due to their outstanding quality and durability they will continue to perform for many more years. Nevertheless our drive to continually improve our knives has led us to develop the new Pro Series. The Pro Series are survival knives of near-unimaginable quality, durability and performance. We began developing the Pro Series knives back in 2010 and finally five years later, we could offer three amazing Pro Series survival knives that are the new world standard for survival knife performance and manufacturing. Simply put, a knife is a blade and a handle. To remain strong and stay sharp the knife must be made of high quality materials. But if the claim is made that a knife is “professional” then the knife and its builder has a responsibility to the user to raise the bar far above what is common. The Pro Series truly is professional.

Compared to their predecessors, the Pro series of F1, S1 and A1 differs in the following important areas:

1. The original laminated VG10 steel is upgraded to a laminate cobalt steel (lam. CoS) blade that ensures a durable edge and improved edge retention.
2. The blades are thicker increasing the torsional rigidity so the knives will withstand even greater external forces.
3. The full-length tapered tang is wider and thicker and therefore significantly stronger.
4. The crossguard is now made of stainless steel and permanently welded to the tang.
5. The convex blade edge has been refined to improve its cutting properties.
6. The zytel sheaths are redesigned, more durable, and better suited for the Molle attachment system.

Understandably these knives fall into a higher price category. However, considering the unparalleled quality they are by no means over priced. A professional survival knife must perform in all weather with no exceptions. The professional survival knife must be comfortable and safe to handle for both fine and rough work in summer heat and winter cold. At Fallkniven we have considered every design aspect of these superb professional survival knives.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 5.12" inch / 130 mm
Total length: 9.72” inch / 247 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 6 mm
Knife weight 257 gr.

Blade thickness: 6 mm
Knife weight 257 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Finger Guard: Stainless Steel

Blade: Satin Finish

Laminated CoS: A newly developed high alloy cobalt-special steel

Additional Information:

Edge: Convex

Sheath Included: Zytel

Finger Guard: Stainless Steel

Tang: Full Tang

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven Taiga Forester TF2z Hunting Knife

- Made by Fällkniven -

Introduction:

The Taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. What is a special about these knives is the very secure plastic sheath where a specially designed locking system ensures that the knife is properly locked when it is placed in the sheath. It works regardless of weather and wind, sand or snow.

Specifications:

Steel: Laminated Cos HRC 60
Blade length: 4.72" inch / 120 mm
Total length: 9.25” inch / 235 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Thermorun

Blade thickness: 5 mm
Knife weight 120 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Finger Guard: Stainless Steel

Tang: Broad Tang

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven Tungsten Carbine S1bL Forest Knife

- Made by Fällkniven -

Introduction:

The Fallkniven S1 Forest Knife is one of the best knife ever made for outdoor adventure and fishing. The sturdy blade of the S1 made of extremely strong laminated VG10 custom stainless steel. The edge of the S1 is a convex grind for extra strong cutting power. The modified clip point blade shape works extremely well for penetrating tough materials, and the long curved edge is ideal for skinning. The blade of the S1 is long enough for mild chopping work. With a full 5mm (0.2″) thickness, there is little chance the blade could ever break. The checkered handle of the S1 provides an excellent grip in all conditions even when your hands are cold and wet. If you are looking for top quality classic knife, the Fallkniven S1 is one of the best in the world. The CeraKote is an extremely tough surface coating that will also protect the blade from corrosion. CeraKote is a hard coating made of Teflon and ceramics that we apply for military users and others who want to avoid shiny blades. Be aware, however, that although CeraKote is an industry standard, it is also just a finish applied to the metal blade similar to painting a car. Please note that physical abrasions could scratch through the CeraKote coating. Over time, the black CeraKote may separate from the blade, but more durable coatings make the knife difficult to sharpen and cost up to 100 times more than CeraKote. Attaching a black surface on a rust resistant, perfectly smooth blade so that it sticks for time and eternity is all impossible. We have tested some extremely hard coatings, but they proved to be many times more expensive and make it harder to sharpen the knife. The sheath is our open top dangler black leather sheath.

Blade length: 5.12" inch / 130 mm
Total length: 9.72” inch / 247 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 5 mm
Knife weight 193 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade: Black Coated

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven Tungsten Carbine S1L Forest Knife

- Made by Fällkniven -

Introduction:

The Fallkniven S1 Forest Knife is one of the best knife ever made for outdoor adventure and fishing. The sturdy blade of the S1 made of extremely strong laminated VG10 custom stainless steel. The edge of the S1 is a convex grind for extra strong cutting power. The modified clip point blade shape works extremely well for penetrating tough materials, and the long curved edge is ideal for skinning. The blade of the S1 is long enough for mild chopping work. With a full 5mm (0.2″) thickness, there is little chance the blade could ever break. The checkered handle of the S1 provides an excellent grip in all conditions even when your hands are cold and wet. If you are looking for top quality classic knife, the Fallkniven S1 is one of the best in the world. The sheath is our open top dangler black leather sheath.

Blade length: 5.12" inch / 130 mm
Total length: 9.72” inch / 247 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 5 mm
Knife weight 193 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade: Satin Finish

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven Tungsten Carbine S1z Forest Hunting Knife

- Made by Fällkniven -

Introduction:

The Fallkniven S1 Forest Knife is one of the best knife ever made for outdoor adventure and fishing. The sturdy blade of the S1 made of extremely strong laminated VG10 custom stainless steel. The edge of the S1 is a convex grind for extra strong cutting power. The modified clip point blade shape works extremely well for penetrating tough materials, and the long curved edge is ideal for skinning. The blade of the S1 is long enough for mild chopping work. With a full 5mm (0.2″) thickness, there is little chance the blade could ever break. The checkered handle of the S1 provides an excellent grip in all conditions even when your hands are cold and wet. If you are looking for top quality classic knife, the Fallkniven S1 is one of the best in the world. The injection molded zytel sheath offers a simple, safe and strong combination of qualities that every user will appreciate. The one hand operated zytel sheath is easy to keep clean and available in a  left-handed version for the same price. Another sheath option is our open top dangler black leather sheath.

Specifications:

Steel: Laminated VG10 HRC 59
Blade length: 5.12" inch / 130 mm
Total length: 9.72” inch / 247 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 5 mm
Knife weight 193 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade: Satin Finish

VG10: A well known high alloy molybdenum/cobalt steel

FOX European Hunter 2607 Full Tang Hunting Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

Introduction:

With the European Hunter knife Fox-Knives has developed a wonderful hunting knife, which can be used for almost all operations in the hunting and outdoor sector. The 440C steel full tang blade is nearly unbreakable and impresses with its great design.

- Please select your desired version in the selection menu above -

Specifications:

Steel: stainless steel 440C HRC 57-59 
Blade length: 4.13" inch / 105 mm
Total length: 8.86” inch / 225 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Staghorn or Pakkawood  

Blade thickness: 4 mm
Overall weight 130 / 195 gr.

Additional Information:

Blade Coating: Satin

Leather Sheath: Included

FOX European Hunter 610/11 Hunting Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

Introduction:

With the European Hunter knife Fox-Knives has developed a wonderful hunting knife, which can be used for almost all operations in the hunting and outdoor sector. The European Hunter 610-11 impresses with its great design.

Specifications:

Steel: stainless steel 420C HRC 54-56
Blade length: 4.53" inch / 115 mm
Total length: 8.66” inch / 220 mm
Handle length: 4.13” inch / 105 mm
Handle: Leather

Blade thickness: 3 mm
Overall weight 105 gr.

Additional Information:

Blade Coating: Satin

Leather Sheath: Included

FOX Pro Hunter FX-131 DW or FX-131 MGT - Full Tang Hunting Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

Introduction:

The Fox Pro Hunter knife, is an all-rounder and a reliable companion on the hunt or even in the outdoor area. The Full Tang blade, was designed so that the Pro Hunter withstands even the toughest demands.

Specifications:

Steel: N690Co stainless steel HRC 58-60
Blade length: 4.33" inch / 110 mm
Total length: 9.06” inch / 230 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Palisander wood or Canvas Micarta OD Green 

Blade thickness: 5 mm
Overall weight 190 / 210 gr.

Additional Information:

Blade Coating: Satin / Black Idroglider

Leather Sheath: Included

Handle: Hole for Safety Cord

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.