4.370inch - 4.724inch

Fallkniven Tungsten Carbine S1xb  Knife

- Made by Fällkniven -

Introduction:

Your X-knife is the strongest, sharpest and safest stainless steel knife in production. If your life is in danger, you can always rely on your X-knife. It is designed to withstand all the stresses applied by the human hand, which means that it is virtually indestructible. It assumes, however, that you are careful with the knife and that it is used  as intended, namely as a sharp precision tool. A few words about the all-black version: This surface is the hardest we have ever encountered. Although we really tried to wear down the black coating with the toughest, driest curly birch we could find, we never succeeded in getting holes in this extremely hard, durable surface. Still, we cannot guarantee that it will stay for time and eternity, after all, the blade can be ground and certainly a diamond or ceramic stone will bite on the surface.

Also for example a grain of sand can scratch or leave a mark in the coating. The hardness is at 2400 HV (Vickers) or around HRC 83. They have put a lot of energy into designing a safe knife sheath, which is actually where the knife will spend most of its time. The design of the sheath determines the access to the knife, and here we have really put all our efforts in order to get a safe sheath that allows easy access to the knife. The sheath has both a transport lock (the folding bracket with a strap) and a working safety detail that allows the knife to be in place until you decide to use it. It is a bit a belt-and-braces approach, but we like putting safety first – a lost knife is of no use. The transport lock will therefore allow the knife to be fastened tip-up or tip-down on the body or on your equipment without any risk.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 5.20" inch / 132 mm
Total length: 9.80” inch / 249 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 6 mm
Knife weight 290 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Full Tang

Blade: Black Coated

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven Tungsten Carbine S1xbclip Knife

- Made by Fällkniven -

Introduction:

Your X-knife is the strongest, sharpest and safest stainless steel knife in production. If your life is in danger, you can always rely on your X-knife. It is designed to withstand all the stresses applied by the human hand, which means that it is virtually indestructible. It assumes, however, that you are careful with the knife and that it is used  as intended, namely as a sharp precision tool. A few words about the all-black version: This surface is the hardest we have ever encountered. Although we really tried to wear down the black coating with the toughest, driest curly birch we could find, we never succeeded in getting holes in this extremely hard, durable surface. Still, we cannot guarantee that it will stay for time and eternity, after all, the blade can be ground and certainly a diamond or ceramic stone will bite on the surface.

Also for example a grain of sand can scratch or leave a mark in the coating. The hardness is at 2400 HV (Vickers) or around HRC 83. They have put a lot of energy into designing a safe knife sheath, which is actually where the knife will spend most of its time. The design of the sheath determines the access to the knife, and here we have really put all our efforts in order to get a safe sheath that allows easy access to the knife. As an accessory, the knife sheath is available with a stainless clip that allows you to easily carry the knife on your waist belt. The advantages are several – including that you can easily remove and stow your knife. When belt-mounted, the knife will hang vertically, a few centimeters lower than the belt, allowing it to be accessed even if wearing a backpack or long jacket. The sheath has both a transport lock (the folding bracket with a strap) and a working safety detail that allows the knife to be in place until you decide to use it. It is a bit a belt-and-braces approach, but we like putting safety first – a lost knife is of no use. The transport lock will therefore allow the knife to be fastened tip-up or tip-down on the body or on your equipment without any risk.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 5.20" inch / 132 mm
Total length: 9.80” inch / 249 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 6 mm
Knife weight 290 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel with Clip

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Full Tang

Blade: Black Coated

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven Tungsten Carbine S1z Forest Hunting Knife

- Made by Fällkniven -

Introduction:

The Fallkniven S1 Forest Knife is one of the best knife ever made for outdoor adventure and fishing. The sturdy blade of the S1 made of extremely strong laminated VG10 custom stainless steel. The edge of the S1 is a convex grind for extra strong cutting power. The modified clip point blade shape works extremely well for penetrating tough materials, and the long curved edge is ideal for skinning. The blade of the S1 is long enough for mild chopping work. With a full 5mm (0.2″) thickness, there is little chance the blade could ever break. The checkered handle of the S1 provides an excellent grip in all conditions even when your hands are cold and wet. If you are looking for top quality classic knife, the Fallkniven S1 is one of the best in the world. The injection molded zytel sheath offers a simple, safe and strong combination of qualities that every user will appreciate. The one hand operated zytel sheath is easy to keep clean and available in a  left-handed version for the same price. Another sheath option is our open top dangler black leather sheath.

Specifications:

Steel: Laminated VG10 HRC 59
Blade length: 5.12" inch / 130 mm
Total length: 9.72” inch / 247 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 5 mm
Knife weight 193 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade: Satin Finish

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven Tungsten Carbine S1x Knife

- Made by Fällkniven -

Introduction:

Your X-knife is the strongest, sharpest and safest stainless steel knife in production. If your life is in danger, you can always rely on your X-knife. It is designed to withstand all the stresses applied by the human hand, which means that it is virtually indestructible. It assumes, however, that you are careful with the knife and that it is used  as intended, namely as a sharp precision tool. They have put a lot of energy into designing a safe knife sheath, which is actually where the knife will spend most of its time. The design of the sheath determines the access to the knife, and here we have really put all our efforts in order to get a safe sheath that allows easy access to the knife. The sheath has both a transport lock (the folding bracket with a strap) and a working safety detail that allows the knife to be in place until you decide to use it. It is a bit a belt-and-braces approach, but we like putting safety first – a lost knife is of no use. The transport lock will therefore allow the knife to be fastened tip-up or tip-down on the body or on your equipment without any risk.

Steel: Laminated CoS HRC 60

Blade length: 5.20" inch / 132 mm
Total length: 9.80” inch / 249 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 6 mm
Knife weight 290 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Full Tang

Blade: Satin Finish

Laminated CoS: A newly developed high alloy cobalt-special steel

FOX Arditi FX-595 W Dagger

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

Introduction:

In collaboration with Prof. Antonio G. G. Merendoni.
“To celebrate the 100th anniversary of the foundation of the Italian Assault units, I Gloriosi Arditi (1917-2017), FOX has made a reproduction of the first model of dagger supplied to them, keeping the similarity in a current modern version made with quality materials, combining history and excellence of Italian production in honor of the real heroes of the Great War, those who gave birth to the first modern special forces in the world and the first to specialize with the dagger fencing methods for individual combat.”

Prof. Antonio G.G. Merendoni.

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 6.89" inch / 175 mm
Total length: 11.42” inch / 290 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Zircote Wood

Blade thickness: 4 mm
Overall weight 211 gr.

Additional Information:

Blade Coating: Satin

Leather Sheath: Included

Gift Box: Included

FOX European Hunter 2607 Full Tang Hunting Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

Introduction:

With the European Hunter knife Fox-Knives has developed a wonderful hunting knife, which can be used for almost all operations in the hunting and outdoor sector. The 440C steel full tang blade is nearly unbreakable and impresses with its great design.

- Please select your desired version in the selection menu above -

Specifications:

Steel: stainless steel 440C HRC 57-59 
Blade length: 4.13" inch / 105 mm
Total length: 8.86” inch / 225 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Staghorn or Pakkawood  

Blade thickness: 4 mm
Overall weight 130 / 195 gr.

Additional Information:

Blade Coating: Satin

Leather Sheath: Included

FOX European Hunter 610/11 Hunting Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

Introduction:

With the European Hunter knife Fox-Knives has developed a wonderful hunting knife, which can be used for almost all operations in the hunting and outdoor sector. The European Hunter 610-11 impresses with its great design.

Specifications:

Steel: stainless steel 420C HRC 54-56
Blade length: 4.53" inch / 115 mm
Total length: 8.66” inch / 220 mm
Handle length: 4.13” inch / 105 mm
Handle: Leather

Blade thickness: 3 mm
Overall weight 105 gr.

Additional Information:

Blade Coating: Satin

Leather Sheath: Included

FOX Ferox FX-630 B Survival Knife

- Made by Fox Knives in Italy -

Design by: "Tommaso Rumici".

*Please request availibilty*

Introduction:

The Ferox is a light fixed blade of small dimensions, it is easy to carry with you, even on those occasions where you do not expect to need a knife. The straight handle has two G10 scales with nine grooves, occupied by as many o-rings. In addition to increasing the grip, the rubber rings serve to retain two hexagonal bits, of standard size, in their respective housings. By inserting them in the magnetic hole at the end of the handle, the user has two screwdrivers available, one flat head and one Philips, in that way he does not risk to damage the tip of the knife by trying to use it as such.

Specifications:

Steel: stainless steel N690Co HRC 58-60
Blade length: 3.64" inch / 90 mm
Total length: 8.26” inch / 210 mm
Handle length: 4.72” inch / 120 mm
Handle: G10 Black

Blade thickness: 4 mm
Overall weight 132 gr.

Additional Information:

Tool Set: Included
Leather Sheath: Included
Blade Coating: Physical Vapor Deposition (PVD)

PVD
(Physical Vapor Deposition) is a variety of vacuum deposition methods used to deposit thin films by the condensation of a vaporized form of the desired film material onto various workpiece surface. The coating method involves purely physical process such as high temperature vacuum evaporation with subsequent condensation.

FOX Flipper FX-302 or FX-302 ST or FX-302 G10 Folding Knife

- Made by Fox Knives in Italy -

Design by: "Jens Ansø".

Introduction:

The Flipper features a sculpted handle pattern often referred as ‘Ansø texture’.
A very comfortable handle and a curvy utility blade.

Jens Ansø:

“Ansø knives is about beauty, simplicity and purpose driven design”.

- Please select your desired version in the selection menu above -

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.54" inch / 90 mm
Total length: 8.07” inch / 205 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Titanium / Palisander wood / G10 black

Blade thickness: 4 mm
Overall weight 185 gr.

Additional Information:

Blade Coating: Satin / Black Idroglider stone washed

Clip: stainless steel 420J2B

Sheath: Included

Handle: Hole for Safety Cord

 

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.

FOX Forest 576 Back-Lock Folding Knife

- Made by Fox Knives in Italy -

Design by: "Fox Knives".

Introduction:

The beautiful Forest 576 pocket knife from Fox-Knives impresses not only with its high quality, but also with the balanced price-performance ratio. This is a high quality folding knife in the premuim class.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.74" inch / 95 mm
Total length: 8.46” inch / 215 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Pakka wood / Amboina wood / Black Micarta

Blade thickness: 3.5 mm
Overall weight 230 / 230 / 125 gr.

Additional Information:

Sheath: Included

Blade Coating: Satin

Bolsters: 430 stainless steel

Handle: Hole for Safety Cord (not on Fox Forest 576RT Amboina wood)

Locking Mechanism: Back Lock

FOX FX-525 DB Damascus Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bob Terzuola".

Introduction:

Bob Terzuola:

"I always design my knives to be functional but graceful. The utility is always the main factor in my designs as a knife should be perfectly useful and comfortable in a variety of positions and cutting situations”.

Specifications:

Steel: Damasteel® Dense Twist ™l HRC 58-60 
Blade length: 3.35" inch / 85 mm
Total length: 7.87” inch / 200 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Bocote wood

Blade thickness: 3 mm
Overall weight 100 gr.

Additional Information:

Blade: Damascus

Sheath: Included

FOX FX-525 OL or  FX-525 B or FX-525 BE Terzuola Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bob Terzuola".

Introduction:

Bob Terzuola:

"I always design my knives to be functional but graceful. Utility is always the main factor in my designs as a knife should be perfectly useful and comfortable in a variety of positions and cutting situations”.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.35" inch / 85 mm
Total length: 7.87” inch / 200 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Olive wood / Bocote wood  / Birch wood  

Blade thickness: 3 mm
Overall weight 100 gr.

Additional Information:

Blade Coating: satin

FOX Karambit 479 TK (Training) Folding Knife

- Made by Fox Knives in Italy -

Design by: "Fox Knives".

Introduction:

The Fox Karambit knife, is a super lightweight and an excellent training knife.

Specifications:

Steel: 420C stainless steel HRC 54-56
Blade length: 2.95" inch / 75 mm
Total length: 7.48” inch / 190 mm
Handle length: 4.53” inch / 115 mm
Handle scales: G10 red

Blade thickness: 3 mm
Overall weight 130 gr.

Additional Information:

Blade Coating: bead blasted

Clip: stainless steel 420J2B - reversible

Back Ring: T6-6082 aircraft aluminum

FOX Rescue Karambit FX-599 RSY or FKMD FX-599 RS Folding Knife

- Made by Fox Knives in Italy -

Design by: "Fox Knives".

Introduction:

1.) The FOX FX-599 RSY Rescue Karambit is a folding knife with N690Co stainless steel blade stone washed surface treatment, Practical carabiner made from the red aluminum ring, glass breaker punch and Phillips screwdriver in the upper part of the blade. G10 UV (Reactive) yellow handle CNC machined with rough textured for a non "slip grip". With reversible stainless steel clip. This rescue and emergency knife impresses also with its stability.

2.) FKMD FOX FX-599 RS KARAMBIT Tactical Knife. Black Idroglider® surface treatment, which ensures smoothness and long duration - G10 black handle CNC machined with rough textured for a "non slip" grip. Complete with reversible stainless steel clip - FKMD Knives FOX Knives Military Division.

- Please select your desired version from the drop-down menu above -

Blade thickness: 3 mm
Overall weight 110 gr.

Additional Information:

Blade Coating: Satin / Cerakote™ black

Clip: stainless steel 420J2B - reversible

Back Ring: T6-6082 aircraft aluminum

FOX Phoenix FX-531 Ti BL or FX-531 Ti BR - E.D.C Folding Knife

- Made by Fox Knives in Italy -

Design by: "Tashi Bharucha".

Introduction:

Tashi Bharucha:

“I have a couple of things in mind when I design a folder: I try to pack as much blade as possible into the handle, I want the knife to feel great in the hand and to look good.

It should have character. The Phoenix has all those features in one tight little package. Fantastic ergonomics and... a sexy look!”

- Please select your desired version in the selection menu above -

Specifications:

Steel: M390 stainless steel HRC 59-60 
Blade length: 3.35" inch / 85 mm
Total length: 7.87” inch / 200 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Titanium anodized blue / Titanium anodized brown  

Blade thickness: 4 mm
Overall weight 150 gr.

Additional Information:

Blade Coating: Satin

Clip: Titanium

Sheath: Included

FOX Pro Hunter FX-131 DW or FX-131 MGT - Full Tang Hunting Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

Introduction:

The Fox Pro Hunter knife, is an all-rounder and a reliable companion on the hunt or even in the outdoor area. The Full Tang blade, was designed so that the Pro Hunter withstands even the toughest demands.

Specifications:

Steel: N690Co stainless steel HRC 58-60
Blade length: 4.33" inch / 110 mm
Total length: 9.06” inch / 230 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Palisander wood or Canvas Micarta OD Green 

Blade thickness: 5 mm
Overall weight 190 / 210 gr.

Additional Information:

Blade Coating: Satin / Black Idroglider

Leather Sheath: Included

Handle: Hole for Safety Cord

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.

FOX Shadow FX-533 CF or FX-533 Ti - Titanium Frame Lock Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bastinelli".

Introduction:

Bastinelli:

“Generally, for all my design, I always try to associate a perfect ergonomics, and a real utility in accordance with the needs of customers, civilians or professionals”.

Specifications:

Steel: Elmax stainless steel HRC 58-60
Blade length: 3.94" inch / 100 mm
Total length: 8.66” inch / 220 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Carbon fiber or Titanium anodized black  

Blade thickness: 4 mm
Overall weight 140 gr.

Additional Information:

Blade Coating: Stone washed / Stone washed PVD

Clip: stainless steel 420J2B

Sheath: Included

Handle: Hole for Safety Cord

PVD
(Physical Vapor Deposition) is a variety of vacuum deposition methods used to deposit thin films by the condensation of a vaporized form of the desired film material onto various workpiece surface. The coating method involves purely physical process such as high temperature vacuum evaporation with subsequent condensation.

FOX The Dart FX-597 Tanto Folding Knife

- Made by Fox Knives in Italy -

Design by: "Doug Marcaida".

Introduction:

Doug Marcaida:

“My designs in general are based on my knowledge and use of blades related to my martial arts skills and experiences as a judge in History Channel’s Forged In Fire”.

 

Specifications:

Steel: N690Co stainless steel HRC 58-60
Blade length: 2.56" inch / 65 mm
Total length: 7.28” inch / 185 mm
Handle length: 4.72” inch / 120 mm
Handle scales: G10 black

Blade thickness: 3 mm
Overall weight 100 gr.

Additional Information:

Blade Coating: black Idroglider

Clip: stainless steel 420J2B - reversible

Back Ring: T6-6082 aircraft aluminum

 

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.

FOX The Dart FX-597 TK (Trainer) Folding Knife

- Made by Fox Knives in Italy -

Design by: "Doug Marcaida".

Introduction:

The FOX Dart FX-597 TK is made to be an exact feel and function of the FOX Dart FX-597 so you can train and control the use of the knife safely in “real feel” mode.

Doug Marcaida:

“My designs in general are based on my knowledge and use of blades related to my martial arts skills and experiences as a judge in History Channel’s Forged In Fire”.

 

Specifications:

Steel: 420C stainless steel HRC 54-56
Blade length: 2.56" inch / 65 mm
Total length: 7.28” inch / 185 mm
Handle length: 4.72” inch / 120 mm
Handle scales: G10 orange

Blade thickness: 3 mm
Overall weight 100 gr.

Additional Information:

Blade Coating: bead blasted

Clip: stainless steel 420J2B - reversible

Back Ring: T6-6082 aircraft aluminum

FOX Ziggy FX-308 ZW Folding Knife

- Made by Fox Knives in Italy -

Design by: "Jens Ansø".

Introduction:

Jens Ansø:

“Ansø knives is about beauty, simplicity and purpose driven design”.

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.15" inch / 80 mm
Total length: 7.87” inch / 200 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Ziricote wood  

Blade thickness: 3.5 mm
Overall weight 115 gr.

Additional Information:

Blade Coating: Satin

Clip: stainless steel 420J2B

Sheath: Included

Handle: Hole for Safety Cord

Muela "25-M" Rosewood Folding Knife

- Handcrafted by Muela in Spain -

The classic Muela 25-M has a satin-finished blade made of 1.4116, which is opened by Nail Nick. The dark Rosewood handle scale insert gives the knife a noble touch. With stable Backlock.

Steel: MOVA 1.4116 (X50CrMoV15)
Blade length: 3.267” inch / 83 mm
Total length: 7.283” inch /  185 mm
Handle length: 4.015” inch / 102 mm
Handle scales: Rose Wood
Bolster: Brass
Knife weight 108 gr.

Blade thickness: 2.5 mm

Additional steel informations:

“MOVA” 1.4116 (X50CrMoV15)

It´s classic steel used in fixed knives and folding knives. An excellent combination of Molybdenum and Vanadium that is highly stain resistant, though and corrosion resistant.