111mm - 120mm

German PUMA Anniversary Collectors Knife Of The Year 2024

(Limited Edition of 255 pieces)

- Made in Solingen / Germany -

Introduction:

The design of the PUMA Annual Knife 2024 comes from knifemaker Christoph Daim, a member of the German Knifemakers Guild (DMG), who looks for something special, artistic and interesting in knives. Together with engraver Stefanie Ottilie, he has produced the first prototype for us, which has a particularly artistic touch. 

At first glance, the 2024 annual knife has a simple and minimalist design and even dispenses with handle scales. However, it scores points with beautiful laser engravings of our heraldic animal, the PUMA. Enjoy the laser engravings of the elegant predator on both sides. On the front there is a laser engraving of a lurking puma behind a tree, on the back you can see a puma in a playful leap typical of cats, "hunting" butterflies.  The PUMA annual knife is limited to just 255 pieces worldwide. The annual knife, laser engraved, is made of 1.4116 stainless steel and comes with a handmade leather sheath and a high-quality, decorative display stand.

Specifications:

Blade Length: 4.803" inch / approx. 122 mm
Blade Thickness: 5 mm
Overall Length: 9.842" inch / approx. 250 mm
Knife Weight: 240 g
Steel / Hardness: 1.4116 / 58 HRC
Sheath: Handcrafted Leather Sheath
Packaging: Display Showcase Packaging

Limitation: 255 Pieces
Design: Christoph Daim

German Puma Automesser Hunting Knife (without saw tooth)

- Made in Solingen / Germany -

Introduction:

The PUMA "Automesser" is an ultimate classic with decades of proven universal blade for the strongest demands - from PUMA Solingen.

The PUMA "Automesser" was created on the basis of the original PUMA "white hunter" back in the 1960's and has the same outstanding features. The blade shape is precisely thought out and effortlessly meets all conceivable requirements. The sturdy tip is robust enough to open cans or pry open crown caps. A hatchet edge is ground into the center of the back of the blade for rough work such as splitting firewood or chopping bones. The "automesser" is equipped with plum wood scales, which are firmly riveted to the tang that goes fully through the handle. With all these attributes, this classic success model is an innovative knife that has lost absolutely nothing of its relevance.

At the request of many inquiries, now also without saw tooth! The rear part of the cutting edge allows you to have more control over the knife, which is particularly important when performing delicate work.

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 6,102 " inch / 155 mm
Total length: 10-5/8 " inch / 270 mm
Handle length: 4,527 " inch / 115mm
Handle scales: Plum Wood
Blade thickness: 5 mm
Net weight 237 gr.

German Puma Automesser Hunting Knife

- Made in Solingen / Germany -

Introduction:

The PUMA AUTOMESSER is an ultimate classic with decades of proven universal blade for the strongest demands - from PUMA Solingen.

The PUMA "Automesser" (Car-knife) was created on the basis of the original PUMA "white hunter" back in the 1960's and has the same outstanding features. The blade shape is precisely thought out and effortlessly meets all conceivable requirements. The sturdy tip is robust enough to open cans or pry open crown caps. A hatchet edge is ground into the center of the back of the blade for rough work such as splitting firewood or chopping bones. In addition, the blade has a practical saw tooth in the back of the cutting edge to cut green branches, fish skin or similar material with a firm surface. The "Automesser" is equipped with plum wood scales, which are firmly riveted to the tang that goes fully through the handle. With all these attributes, this classic success model is an innovative knife that has lost absolutely nothing of its relevance.

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 6,102 " inch / 155 mm
Total length: 10-5/8 " inch / 270 mm
Handle length: 4,527 " inch / 115mm
Handle scales: Plum Wood
Blade thickness: 5 mm
Net weight 237 gr.

German PUMA Bowie Hunting Stag Knife

- Made in Solingen / Germany -

Introduction:

The Puma bowie knife is a thoroughbred classic among PUMA knives. The PUMA bowie knife is a medium-weight hunting and working knife, but also a very special model for hobbyists and collectors. The name goes back to the Texan folk hero James Bowie. The American myth lives on at PUMA.

Specifications:

Steel: 440C / 57-60 HRC
Blade length: 6.535” inch / 166 mm
Total length: 11.024” inch / 280 mm
Handle length: 4.488” inch / 114 mm
Handle scales: stag horn
Blade thickness: 4 mm
Overall weight 200 gr.

Additional Information:

– Leather Sheath Included

– Strap Eye for the sheath

– Hand guard

– Aluminum Bolster

– PUMA design

German PUMA Castellan Snake Wood Folding Knife

- Made in Solingen / Germany -

Introduction:

After PUMA introduced a noble knife series in the 1970s with the names ‘Earl’, “Prince” and ‘Duke’, inspired by aristocratic titles, manufactured in Solingen, with classic stag horn scales - we are now continuing our tradition of high-quality craftsmanship with a new model. This new knife bears the name ‘Castellan’ - not an inherited aristocratic title, but an honourable title of office. This knife has a unique look to match: a precisely crafted Solingen knife with a mirror polished clip point blade with nail nick and handle scales made of snakewood, which impresses with its deep brown grain and smooth feel and forms a beautiful contrast to the nickel silver bolsters. The overall look remains true to our classic style - robust, traditional and representative. This PUMA knife is the perfect companion for everyday use, leisure, hiking and all other activities where a good pocket knife is needed.

Specifications:

Steel: 1.4110 / 55-57 HRC
Blade length: 3.425” inch / 87 mm 
Total length: 7.795” inch / 198 mm 
Handle length: 4.370” inch / 111 mm
Handle scales: Snake Wood
Blade thickness: 2.4 mm
Overall weight 111 gr.

Additional Information:

– Back Lock

– Nickel Silver Bolster

German PUMA Extension Stag Folding Knife

- Made in Solingen / Germany -

Introduction:

PUMA G.E.K. German Expedition Knife

- Handcrafted in Solingen / Germany -

Introduction:

German PUMA Hunter´s Companion Knife

Made in Solingen / Germany 

Introduction:

The PUMA hunter's companion is a balanced and robust all-round knife, which has been newly released to celebrate 250 years of company history. Through a survey with hunters, outdoor enthusiasts and knife lovers, we wanted to know which earlier PUMA model was particularly popular and deserved a new edition. The hunter's companion was selected. The distinctive thumb rest ensures a safe pressure spread during cutting work and the stag horn grips lies comfortably in hand.

Specifications:

Steel: 440C / 57-60 HRC
Blade length: 4.213” inch / 107 mm
Total length: 8.583” inch / 218 mm
Handle length: 4.370” inch / 111 mm
Handle scales: Stag horn
Blade thickness: 3.7 mm
Overall weight 185 gr.

Additional Information:

– Leather Sheath Included

– Nickel silver Bolster

– Hole for Safety Cord

– Thumb recess in the handle

PUMA Jagdnicker Hunting Knife

- Made in Solingen / Germany -

Introduction:

PUMA knife of the year 2022 DAMASTEEL SuperClean limited to 50 pieces

German PUMA Muffel Hunting Stag Knife

- Made in Solingen / Germany -

Introduction:

The blade, which has been tested for Rockwell hardness, is made of mirror-polished 1.4116 stainless steel and has a decorative back. The transition from the handle to the blade is designed to protect the hand. The leather sheath has been finished off with metal fittings.

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 3.819” inch / 97 mm
Total length: 8.386” inch / 213 mm
Handle length: 4.567” inch / 116 mm
Handle scales: Stag horn
Blade thickness: 4 mm
Overall weight 95 gr.

Additional Information:

– Leather Sheath with Metal fittings Included

– Hand guard

– Nickel-plated ferrule and nickel silver end cap

German PUMA White Hunter Oryx Edition Hunting Knife

Made in Solingen / Germany -

Introduction:

64 years after the introduction of the famous PUMA white hunter we present an exclusive new version of our classic: The PUMA white hunter Oryx Edition.

Description:

The handles for this knife are made from the horns of the Oryx antelope. The special shape of these horns gives the handles a unique look. The blade shape of our white hunter remains unchanged, but is enhanced by the image of an oryx antelope.

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 155 mm
Total length: 270 mm
Handle length: 115mm
Handle scales: Oryx Horn
Blade thickness: 5 mm
Net weight 230 gr.

German PUMA Saubart Hunting Knife

- Made in Solingen / Germany -

Introduction:

The Puma Saubart knife is a handy and short, yet very powerful knife in full-tang construction for universal use - from PUMA Solingen.

The PUMA “saubart” offers the user many advantages due to the following features:

Sandvik stainless steel 14C28N is used as blade material, which brings it to a Rockwell hardness of 60-62 HRC, which gives the knife a high cutting strength.

The new blade shape, previously tested by hunters, allows the use of the complete cutting surface. In addition, the blade back is provided with a ground phase.

With a blade length of 100 mm and a thickness of 3 mm, the knife is compact and allows practical handling. Thanks to the solid construction, the “saubart” is also very stable.

Hirschhorn was chosen for the handle formwork. Thanks to the pronounced finger grooves in combination with the strong gag made of nickel silver, this high-quality PUMA knife provides a secure grip when working with it.

A brown saddle leather sheath is supplied for safe driving and transport.

Specifications:

Steel: Sandvik 14C28N / 60-62 HRC
Blade length: 3.937” inch / 100 mm
Total length: 8.346” inch / 212 mm
Handle length: 4.409” inch / 112 mm
Handle scales: Staghorn & Pakka Wood
Blade thickness: 3 mm
Overall weight 211 gr.

Additional Information:

– Leather Sheath Included

– Hole for Safety Cord

– Hand guard

German PUMA Skinmaster Integral Hunting Stag Knife

Made in Solingen / Germany 

Introduction:

The Puma Skinmaster knife is a solid integral knife, drop-forged from one piece of steel - from PUMA Solingen.

"Knocking out of the blanket", "skinning" and "abalgen" are the technical terms in the hunter's language for the activity of skinning. To be able to work professionally and effectively, a specially designed skinning knife is recommended for this purpose. Our practice-oriented designed model "skinmaster" is drop-forged from one piece of steel according to DIN WN 1.4116 and is therefore extremely stable. The handle scales are riveted to the flat and are made of selected stag horn.

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 3.661” inch / 93 mm
Total length: 8.071” inch / 205 mm
Handle length: 4.409” inch / 112 mm
Handle scales: Staghorn
Blade thickness: 5 mm
Overall weight 240 gr.

Additional Information:

– Leather Sheath Included

– Designed by F. Plöger

– Hole for Safety Cord

German PUMA Skinner Hunting Knife

- Made in Solingen / Germany -

Introduction:

The PUMA "Skinner" knife is a special knife in a classic shape that was developed in the second half of the last century and has lost none of its popularity - by PUMA Solingen.
The tip of the Skinner blade, which is typical for skinning, is slightly above the back of the blade on this Solingen classic. As a result, the cutting edge becomes very bulbous in the front part and is thus lengthened. This has the advantage that much longer cuts can be made and the need to apply the knife repeatedly is reduced. Since the tip of the blade is very high, the risk of accidentally stabbing the valuable fur is also significantly reduced. Distortion-free pakkawood scales and reliable aluminum finger protection sit on the continuous flat tang.

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 5.079” inch / 129 mm
Total length: 9.449” inch / 240 mm
Handle length: 4.370” inch / 111 mm
Handle scales: Pakka Wood
Blade thickness: 4.5 mm
Overall weight 160 gr.

Additional Information:

– Leather Sheath Included

– Strap Eye for the sheath

– Hand guard

– Aluminum Bolster

German PUMA Skinner Hunting Stag Knife

- Made in Solingen / Germany -

Introduction:

The Puma Skinner knife is a special knife in classic form, which was already developed in the second half of the last century and has lost nothing of its popularity - from PUMA Solingen.

The tip of the skinner blade, which is typical for skinning, is slightly above the back of the blade on this Solingen classic. This makes the cutting edge very bulbous in the front part and thus lengthens it. This has the advantage that much longer cuts can be made and the repeated application of the knife is reduced. Since the tip of the blade is very high up, the risk of accidentally piercing the precious hide is also significantly minimized.  On the continuous Flacherl sit selected deer horn scales and a reliable finger protection made of aluminum.

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 5.079” inch / 129 mm
Total length: 9.449” inch / 240 mm
Handle length: 4.370” inch / 111 mm
Handle scales: Stag horn
Blade thickness: 4.5 mm
Overall weight 160 gr.

Additional Information:

– Leather Sheath Included

– Strap Eye for the sheath

– Hand guard

– Aluminum Bolster

German PUMA Tucson Bowie Hunting Knife

- Made in Solingen / Germany -

Introduction:

The original Bowie knife from Puma is equipped with ergonomically shaped, attractive pakkawood shells. The 1.4125 blade has a Bowie shape, which is suitable for many purposes.

Specifications:

Steel: 1.4125 / 57-60 HRC
Blade length: 6.496” inch / 165 mm
Total length: 10.984” inch / 279 mm
Handle length: 4.488” inch / 114 mm
Handle scales: Pakka wood
Blade thickness: 4 mm
Overall weight 201 gr.

Additional Information:

– Leather Sheath Included

– Strap Eye for the sheath

– Hand guard

– Aluminum Bolster

– PUMA design

German PUMA Waidbesteck Hunting Stag Knife Set (Waidblatt & Nicker)

- Made in Solingen / Germany -

Introduction:

This Puma knife set is probably one of the most famous Puma hunting knives ever. The Puma "Waidbesteck" has proven itself over decades in the hunting business and is very popular with hunters. 

The "Waidbesteck" was already developed in the middle of the last century by OFM Walter Frevert and is still part of the traditional hunting equipment - from PUMA Solingen.

The ultimate equipment for the hunter! The PUMA "waidbesteck" consists of the "waidblatt" (item no. 113588) and the small "jagdnicker" (item no. 113587). The bulky blade of the waidblatt is kept extremely sturdy and is therefore not only well suited for intercepting game but also as a stand-in. Meanwhile, the Jagdnicker is ideal for red work and other cutting tasks in the hunting area.  Both knives feature fiber-backed deer horn handle scales and solid nickel silver fittings. The matching, high-quality combination saddle leather sheath reliably holds the PUMA "waidbesteck".

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 8.543” inch / 217 mm
Total length: 12.992” inch / 330 mm
Handle length: 4.449” inch / 113 mm
Handle scales: Stag horn
Blade thickness: 8 mm
Overall weight 580 gr.

Additional Information:

– Leather Sheath included

– Frevert Design

– Hole for Safety Cord

German PUMA Waidblatt Hunting Knife

- Made in Solingen / Germany -

Introduction:

The "Waidblatt" was already developed in the middle of the last century by Chief Forester Walter Frevert and is one of the classic hunting knives - from PUMA Solingen.

Legends never die, as is well known! The "Frevertsche Waidblatt" by PUMA has been an integral part of traditional hunting equipment for many decades and has not lost its relevance in terms of design and functionality to this day. The bulky blade with a ground phase in the local area is kept extremely stable and is therefore very well suited not only for the interception of game but also as a stand in the hunting ground. The walnut handle scales are underlaid with fiber and the solid nickel silver fittings (parry element and pommel) make this high-quality, classic hunting knife particularly safe to handle. The matching leather belt sheath is equipped with two safety straps.

Specifications:

Waidblatt:

Steel: 1.4116 / 55-57 HRC
Blade length: 8.543” inch / 217 mm
Total length: 12.992” inch / 330 mm
Handle length: 4.449” inch / 113 mm
Handle scales: Walnut Wood
Blade thickness: 8 mm
Overall weight 578 gr.

Additional Information:

– Leather Sheath included

– Frevert Design

– Hole for Safety Cord

German PUMA Waidblatt Hunting Stag Knife

- Made in Solingen / Germany -

Introduction:

This Puma knife is probably one of the most famous Puma hunting knives ever. The Puma "Waidblatt" has proven itself over decades in the hunting business and is very popular with hunters. The "Waidblatt" was already developed in the middle of the last century by chief forester Walter Frevert and belongs to the classic hunting knives - from PUMA Solingen.

Legends never die, as is well known! The "frevertsche waidblatt" from PUMA has been an integral part of traditional hunting equipment for many decades and has not lost its relevance in terms of design and functionality to this day. The bulky blade with a ground phase in the local area is kept extremely stable and is therefore very well suited not only for the interception of game but also as a stand in the hunting ground. The handle scales made of deer horn are underlaid with fiber and the solid nickel silver fittings (parry element and pommel) make this high-quality, classic hunting knife particularly safe to handle. The matching leather belt sheath is equipped with two safety straps incl. push head lock.

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 8.543” inch / 217 mm
Total length: 12.992” inch / 330 mm
Handle length: 4.449” inch / 113 mm
Handle scales: Stag horn
Blade thickness: 8 mm
Overall weight 580 gr.

Additional Information:

– Leather Sheath included

– Frevert Design

– Hole for Safety Cord

German PUMA Waidmann Hunting Knife

- Made in Solingen / Germany -

Introduction:

The PUMA waidmann is truly an impressive hunting knife!

It not only combines functionality with appealing design but also offers excellent handling thanks to the olive wood scales and the nickel silver bolsters. The fact that it is suitable for various applications in the field makes it a versatile tool that is useful both for hunting and in outdoor activities. Additionally, each knife is unique due to the distinctive grain of the wood, making it a special piece.

Specifications:

Steel: 1.4116 stainless steel / 55-57 HRC
Blade length: 4.685” inch / 119 mm 
Total length: 9.212” inch / 234 mm 
Handle length: 4.527” inch / 115 mm
Handle scales: Olive Wood
Blade thickness: 3 mm
Overall weight 179 gr.

Additional Information:

– Leather Sheath Included

– Hand guard

German PUMA Waidmann Stag Hunting Knife

- Made in Solingen / Germany -

Introduction:

The Puma Waidmann stag knife is a beautifully shaped and sturdy hunting knife suitable for many applications in the hunting ground - from PUMA Solingen.

This beautifully shaped, rustic hunting knife is equipped with stag horn scales and nickel silver bolsters. The PUMA "Waidmann" fits well in the hand and performs all necessary tasks reliably. Due to its compact and stable design with continuous tang, this high-quality woad knife is also used in the outdoor area as well as a practical snack knife. The selected deer horn scales are permanently fixed with strong rivets and give the "waidmann" a particularly good grip. With this practical PUMA knife, hunting becomes a very special experience.

Specifications:

Steel: 440A / 55-57 HRC
Blade length: 4.488” inch / 114 mm
Total length: 9.133” inch / 232 mm
Handle length: 4.645” inch / 118 mm
Handle scales: Staghorn
Blade thickness: 3 mm
Overall weight 208 gr.

Additional Information:

– Leather Sheath Included

– Hand guard

German Puma White Hunter 240 Olive Hunting Knife

- Made in Solingen / Germany -

Introduction:

The PUMA White Hunter 240 with Olive Wood Handle is equipped with a proven White Hunter blade made of stainless steel 1.4116. The PUMA white hunter 240 was developed by us for the 240th anniversary of the company. Modified according to the latest ergonomic findings, it has lost none of its charm. This offers a thumb rest on the back of the knife, which ensures a safe transmission of force during heavy cutting work. The solid handle features beautifully figured Olive wood scales and large brass rivets. A pronounced hand guard provides the necessary safety.

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 6,102 " inch / 157 mm
Total length: 10-5/8 " inch / 273 mm
Handle length: 4,527 " inch / 116mm
Handle scales: Olive Wood
Blade thickness: 4 mm
Net weight 278 gr.

German PUMA White Hunter 240 Hunting Stag Knife

- Made in Solingen / Germany -

Introduction:

Puma "White Hunter 240 stag" is a further development of the classic with tried and tested universal blade for the strongest demands - from PUMA Solingen.

The PUMA "White Hunter 240" is a new version of the well-known classic. On the occasion of our 240th company anniversary, we have reworked it and modified it according to the latest ergonomic findings, but without changing the proven characteristics of the original model. The sturdy tip is robust enough to open cans or pry open crown caps. A hatchet edge is ground into the center of the back of the blade for coarse work such as splitting firewood or chopping bones. Our "white hunter 240" in this version is equipped with deer horn handle scales, which are firmly riveted to the tang that goes fully through the handle. With all these attributes, this successful model from the house of PUMA is and remains an innovative knife that is suitable for all conceivable applications.

Specifications:

Steel: 1.4125 = 440 C / 57-60 HRC
Blade length: 6.220” inch / 158 mm
Total length: 10.787” inch / 274 mm
Handle length: 4.567” inch / 116 mm
Handle scales: Stag horn
Blade thickness: 4 mm
Overall weight 302 gr.

Additional Information:

– Leather Sheath Included

– Designed by H.P. Knoop

– Hand guard

– Strap Eye for the sheath

– Nickel Silver Bolsters