111mm - 120mm

Muela Viper-11S Hunting Skinner Gut-Hook Knife

- Handcrafted by Muela in Spain -

Introduction:

Muela Viper-11S skinner knife. In this beautiful knife you can see the attention to detail. Muela uses only the finest materials to produce their high quality knives. The Viper-11S is a very fine skinner knife, which is supplied with finest Crown Stag handle. The guard is made of stainless steel. The steel of the blade has a Rockwell hardness of 56-58 HRC. A high quality brown leather is included and belongs to this beautiful knife.

Specifications:

Steel: 1.4116 Stainless Steel = “MOVA”  (X50CrMoV15)
Blade length: 4.330” inch / 110 mm 
Total length: 9.055” inch /  230 mm
Handle length: 4.724” inch / 120 mm
Handle: Crown Stag

Knife weight: 160 gr.

Steel quality informations 1.4116:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosion resistant.

German Puma Automesser Hunting Knife

- Made in Solingen / Germany -

Introduction:

The PUMA AUTOMESSER is an ultimate classic with decades of proven universal blade for the strongest demands - from PUMA Solingen.

The PUMA "Automesser" (Car-knife) was created on the basis of the original PUMA "white hunter" back in the 1960's and has the same outstanding features. The blade shape is precisely thought out and effortlessly meets all conceivable requirements. The sturdy tip is robust enough to open cans or pry open crown caps. A hatchet edge is ground into the center of the back of the blade for rough work such as splitting firewood or chopping bones. In addition, the blade has a practical saw tooth in the back of the cutting edge to cut green branches, fish skin or similar material with a firm surface. The "Automesser" is equipped with plum wood scales, which are firmly riveted to the tang that goes fully through the handle. With all these attributes, this classic success model is an innovative knife that has lost absolutely nothing of its relevance.

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 6,102 " inch / 155 mm
Total length: 10-5/8 " inch / 270 mm
Handle length: 4,527 " inch / 115mm
Handle scales: Plum Wood
Blade thickness: 5 mm
Net weight 237 gr.

German PUMA Bowie Hunting Stag Knife

- Made in Solingen / Germany -

Introduction:

The Puma bowie knife is a thoroughbred classic among PUMA knives. The PUMA bowie knife is a medium-weight hunting and working knife, but also a very special model for hobbyists and collectors. The name goes back to the Texan folk hero James Bowie. The American myth lives on at PUMA.

Specifications:

Steel: 440C / 57-60 HRC
Blade length: 6.535” inch / 166 mm
Total length: 11.024” inch / 280 mm
Handle length: 4.488” inch / 114 mm
Handle scales: stag horn
Blade thickness: 4 mm
Overall weight 200 gr.

Additional Information:

– Leather Sheath Included

– Strap Eye for the sheath

– Hand guard

– Aluminum Bolster

– PUMA design

German PUMA Saubart Hunting Knife

- Made in Solingen / Germany -

Introduction:

The "Saubart" is a handy and short, yet very powerful knife in solid construction for universal use - from PUMA Solingen.

 The PUMA "saubart" offers the user many advantages through the following features:

As a blade material, stainless Sandvik steel 14C28N is used, which brings it to a Rockwell hardness of 60-62 HRC, giving the knife a high edge retention.
The new blade shape, previously tested by hunters, allows the use of the complete cutting surface. In addition, the back of the blade is provided with a sharpened phase. With a blade length of 100 mm and a thickness of 3 mm, the knife is compact and allows for practical handling. Thanks to the full tang construction, the "saubart" is also very stable. Pakka wood was chosen for the handle sheathing. This laminated and consolidated material is very durable and warp-free at the same time. Thanks to the pronounced finger recesses in combination with the strong toggle made of nickel silver, there is a secure grip when working with this high-quality PUMA knife. A black saddle leather sheath is included for safe carrying and transport.

Specifications:

Steel: Sandvik 14C28N / 60-62 HRC
Blade length: 3.937” inch / 100 mm
Total length: 8.346” inch / 212 mm
Handle length: 4.409” inch / 112 mm
Handle scales: Pakka wood
Blade thickness: 3 mm
Overall weight 182 gr.

Additional Information:

– Leather Sheath Included

– Hole for Safety Cord

– Hand guard

– Nickel Silver Bolster

German PUMA Skinmaster Integral Hunting Stag Knife

Made in Solingen / Germany 

Introduction:

The Puma Skinmaster knife is a solid integral knife, drop-forged from one piece of steel - from PUMA Solingen.

"Knocking out of the blanket", "skinning" and "abalgen" are the technical terms in the hunter's language for the activity of skinning. To be able to work professionally and effectively, a specially designed skinning knife is recommended for this purpose. Our practice-oriented designed model "skinmaster" is drop-forged from one piece of steel according to DIN WN 1.4116 and is therefore extremely stable. The handle scales are riveted to the flat and are made of selected stag horn.

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 3.661” inch / 93 mm
Total length: 8.071” inch / 205 mm
Handle length: 4.409” inch / 112 mm
Handle scales: Staghorn
Blade thickness: 5 mm
Overall weight 240 gr.

Additional Information:

– Leather Sheath Included

– Designed by F. Plöger

– Hole for Safety Cord

German PUMA Skinner Hunting Knife

- Made in Solingen / Germany -

Introduction:

The PUMA "Skinner" knife is a special knife in a classic shape that was developed in the second half of the last century and has lost none of its popularity - by PUMA Solingen.
The tip of the Skinner blade, which is typical for skinning, is slightly above the back of the blade on this Solingen classic. As a result, the cutting edge becomes very bulbous in the front part and is thus lengthened. This has the advantage that much longer cuts can be made and the need to apply the knife repeatedly is reduced. Since the tip of the blade is very high, the risk of accidentally stabbing the valuable fur is also significantly reduced. Distortion-free pakkawood scales and reliable aluminum finger protection sit on the continuous flat tang.

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 5.079” inch / 129 mm
Total length: 9.449” inch / 240 mm
Handle length: 4.370” inch / 111 mm
Handle scales: Pakka Wood
Blade thickness: 4.5 mm
Overall weight 160 gr.

Additional Information:

– Leather Sheath Included

– Strap Eye for the sheath

– Hand guard

– Aluminum Bolster

German PUMA Skinner Hunting Stag Knife

- Made in Solingen / Germany -

Introduction:

The Puma Skinner knife is a special knife in classic form, which was already developed in the second half of the last century and has lost nothing of its popularity - from PUMA Solingen.

The tip of the skinner blade, which is typical for skinning, is slightly above the back of the blade on this Solingen classic. This makes the cutting edge very bulbous in the front part and thus lengthens it. This has the advantage that much longer cuts can be made and the repeated application of the knife is reduced. Since the tip of the blade is very high up, the risk of accidentally piercing the precious hide is also significantly minimized.  On the continuous Flacherl sit selected deer horn scales and a reliable finger protection made of aluminum.

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 5.079” inch / 129 mm
Total length: 9.449” inch / 240 mm
Handle length: 4.370” inch / 111 mm
Handle scales: Stag horn
Blade thickness: 4.5 mm
Overall weight 160 gr.

Additional Information:

– Leather Sheath Included

– Strap Eye for the sheath

– Hand guard

– Aluminum Bolster

German PUMA Waidblatt Hunting Knife

- Made in Solingen / Germany -

Introduction:

The "Waidblatt" was already developed in the middle of the last century by Chief Forester Walter Frevert and is one of the classic hunting knives - from PUMA Solingen.

Legends never die, as is well known! The "Frevertsche Waidblatt" by PUMA has been an integral part of traditional hunting equipment for many decades and has not lost its relevance in terms of design and functionality to this day. The bulky blade with a ground phase in the local area is kept extremely stable and is therefore very well suited not only for the interception of game but also as a stand in the hunting ground. The walnut handle scales are underlaid with fiber and the solid nickel silver fittings (parry element and pommel) make this high-quality, classic hunting knife particularly safe to handle. The matching leather belt sheath is equipped with two safety straps.

Specifications:

Waidblatt:

Steel: 1.4116 / 55-57 HRC
Blade length: 8.543” inch / 217 mm
Total length: 12.992” inch / 330 mm
Handle length: 4.449” inch / 113 mm
Handle scales: Walnut Wood
Blade thickness: 8 mm
Overall weight 578 gr.

Additional Information:

– Leather Sheath included

– Frevert Design

– Hole for Safety Cord

German PUMA Waidmann Hunting Knife

- Made in Solingen / Germany -

Introduction:

The PUMA waidmann is truly an impressive hunting knife!

It not only combines functionality with appealing design but also offers excellent handling thanks to the olive wood scales and the nickel silver bolsters. The fact that it is suitable for various applications in the field makes it a versatile tool that is useful both for hunting and in outdoor activities. Additionally, each knife is unique due to the distinctive grain of the wood, making it a special piece.

Specifications:

Steel: 1.4116 stainless steel / 55-57 HRC
Blade length: 4.685” inch / 119 mm 
Total length: 9.212” inch / 234 mm 
Handle length: 4.527” inch / 115 mm
Handle scales: Olive Wood
Blade thickness: 3 mm
Overall weight 179 gr.

Additional Information:

– Leather Sheath Included

– Hand guard

German PUMA Waidmann Stag Hunting Knife

- Made in Solingen / Germany -

Introduction:

The Puma Waidmann stag knife is a beautifully shaped and sturdy hunting knife suitable for many applications in the hunting ground - from PUMA Solingen.

This beautifully shaped, rustic hunting knife is equipped with stag horn scales and nickel silver bolsters. The PUMA "Waidmann" fits well in the hand and performs all necessary tasks reliably. Due to its compact and stable design with continuous tang, this high-quality woad knife is also used in the outdoor area as well as a practical snack knife. The selected deer horn scales are permanently fixed with strong rivets and give the "waidmann" a particularly good grip. With this practical PUMA knife, hunting becomes a very special experience.

Specifications:

Steel: 440A / 55-57 HRC
Blade length: 4.488” inch / 114 mm
Total length: 9.133” inch / 232 mm
Handle length: 4.645” inch / 118 mm
Handle scales: Staghorn
Blade thickness: 3 mm
Overall weight 208 gr.

Additional Information:

– Leather Sheath Included

– Hand guard

German PUMA White Hunter 240 Hunting Stag Knife

- Made in Solingen / Germany -

Introduction:

Puma "White Hunter 240 stag" is a further development of the classic with tried and tested universal blade for the strongest demands - from PUMA Solingen.

The PUMA "White Hunter 240" is a new version of the well-known classic. On the occasion of our 240th company anniversary, we have reworked it and modified it according to the latest ergonomic findings, but without changing the proven characteristics of the original model. The sturdy tip is robust enough to open cans or pry open crown caps. A hatchet edge is ground into the center of the back of the blade for coarse work such as splitting firewood or chopping bones. Our "white hunter 240" in this version is equipped with deer horn handle scales, which are firmly riveted to the tang that goes fully through the handle. With all these attributes, this successful model from the house of PUMA is and remains an innovative knife that is suitable for all conceivable applications.

Specifications:

Steel: 440 C / 57-60 HRC
Blade length: 6.220” inch / 158 mm
Total length: 10.787” inch / 274 mm
Handle length: 4.567” inch / 116 mm
Handle scales: Stag horn
Blade thickness: 4 mm
Overall weight 302 gr.

Additional Information:

– Leather Sheath Included

– Designed by H.P. Knoop

– Hand guard

– Strap Eye for the sheath

– Nickel Silver Bolsters

German PUMA White Hunter Classic Hunting Stag Knife

Made in Solingen / Germany

Introduction:

The Puma White Hunter is a German-made knife designed in collaboration with the East African Pro Hunter's Association for hunting big game. Hand-crafted in Solingen, a city famous for its superb blade craftsmanship, the clip-point blade is made from German stainless steel with a full tang and genuine staghorn handle. Each knife meets 55-57 HRC for strength, durability, and easy sharpening. Aluminum bolster. Included leather sheath with belt loop and secure snap-clasp..

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 6,102 " inch / 155 mm
Total length: 10-5/8 " inch / 270 mm
Handle length: 4,527 " inch / 115mm
Handle scales: Stag Horn
Blade thickness: 5 mm
Net weight 240 gr.

Description:

The handles for this knife are made from finest stag horn.

PUMA Jagdnicker Olive Wood Hunting Knife

- Made in Solingen / Germany -

Introduction: