3.583inch - 3.937inch

Fallkniven GPdi Gentleman's Folding Pocket Knife 

- Made by Fällkniven -

Introduction:

Gentleman’s Pocket Knife appears to be a traditional, slightly old-fashioned pocket knife but if you look at it closely you will find nothing but modern materials and hi-tech solutions. We asked some professional hunters to look at a handmade sample of the GP, and their spontaneous review was: This is how a folding knife for hunting purposes should look like! Aside from personal preferences, we guess that many people will like the steel of this knife, our  laminated cobalt steel is unlikely sharp.

Other benefits include the reliable blade lock. A properly built liner-lock system is, in our opinion, the world’s strongest blade lock while still being easy to deal with. This technical solution also means that the knife is easy to clean. Rinse it under running warm water and let it dry for achieving best hygiene and function. As the strong blade bolt is threaded, you can adjust the blade inertia to suit your personal taste. The blade joint does not require lubrication. Oil and grease rather attract dust and dirt and this will increase rather than reduce wear. The shackle at the end of the handle allows you to tie the knife – you wouldn’t like to lose this beauty! The GP knife is made of stainless steel and Desert Ironwood. Desert ironwood is a very durable, heavy and hard wood that, due to its high density, can be a little difficult to process and it also sinks in water. Suede pouch included.

Please note:

There can be some variation in pattern and shades on the wooden handles.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 3.07" inch / 78 mm
Total length: 7.09” inch / 180 mm
Handle length: 3.93” inch / 100 mm
Handle scales: Desert Iron Wood

Blade thickness: 3 mm
Knife weight 96 gr.

Additional Information:

Edge: Flat Ground

Pouch Included: Suede

Locking: Liner Lock

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven GPs Gentleman's Folding Pocket Knife

- Made by Fällkniven -

Introduction:

Gentleman’s Pocket Knife appears to be a traditional, slightly old-fashioned pocket knife but if you look at it closely you will find nothing but modern materials and hi-tech solutions. We asked some professional hunters to look at a handmade sample of the GP, and their spontaneous review was: This is how a folding knife for hunting purposes should look like! Aside from personal preferences, we guess that many people will like the steel of this knife, our  laminated cobalt steel is unlikely sharp.

Other benefits include the reliable blade lock. A properly built liner-lock system is, in our opinion, the world’s strongest blade lock while still being easy to deal with. This technical solution also means that the knife is easy to clean. Rinse it under running warm water and let it dry for achieving best hygiene and function. As the strong blade bolt is threaded, you can adjust the blade inertia to suit your personal taste. The blade joint does not require lubrication. Oil and grease rather attract dust and dirt and this will increase rather than reduce wear.

It’s crazy beautiful, real stag for handle material, but it’s also very hard to get enough many nice looking pieces, which also are legitimate to buy and manufacture. This staghorn comes from a legal source of Sambar deer stag. Staghorn, as everyone knows, is a natural material that moves – it shrinks and swells due to humidity. In addition, when horn ages, it shrinks slightly, and there is not much to do about it. This means that small stress cracks around bolts and ends are already visible on the folding knives or will occur later on. This is not covered by any guarantee! This means that you can always return a knife and request the money back (for the knife) but it cannot be warranty repaired or replaced by another sample. Or as they state on an auction – sold in the existing condition!

If you already know the characteristics of the horn, you can look forward to a really nice sample with well-matched staghorn sides, AAA quality in terms of patterns. Unfortunately, we could not mount the traditional bracket, it simply didn’t fit on this special. Suede pouch included.

Please note:

There can be some variation in pattern and shades on the handles.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 3.07" inch / 78 mm
Total length: 7.09” inch / 180 mm
Handle length: 3.93” inch / 100 mm
Handle scales: Stag

Blade thickness: 3 mm
Knife weight 96 gr.

Additional Information:

Edge: Flat Ground

Pouch Included: Suede

Locking: Liner Lock

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven PCau Folding Pocket E.D.C Knife

- Made by Fällkniven -

Introduction:

The Model PC is a lightweight, modern folding knife with many superb properties. The blade is made using laminated Cobalt Special Steel which guarantees edge retention beyond the ordinary! The blade is locked in place using a liner lock which is well known to be one of the safest and strongest locks in the world. The fiberglass-reinforced Grilon handle is internally lined with stainless steel providing extreme strength. With a weight of only 68 grams (2.4 oz), it is comfortable to carry in your pocket and, should the knife get dirty, it is easy to clean with a little soap and hot water. The pivot is fixed with greaseless Teflon bearings and can be tightened or loosened with a Torx T10 screwdriver. Nail notches on both sides of the blade allow for comfortable use by right and left-handers. The Model PC is a development of the original Model P hence the name. If you are looking for an everyday carry (EDC) knife that uses high-end materials at the cutting edge of knife-making technology, then the PC is the knife for you.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 2.87" inch / 73 mm
Total length: 6.81” inch / 173 mm
Handle length: 3.94” inch / 100 mm
Handle scales: Grilon

Blade thickness: 3 mm
Knife weight 70 gr.

Additional Information:

Edge: Flat Ground

Locking: Liner Lock

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven PCx Folding Pocket E.D.C Knife

- Made by Fällkniven -

Introduction:

We are introducing a brand new development of our EDC folding knife PC, called PCx. The PCx has been fitted with a strong removable pocket clip which offers a safe, fast and comfortable access to the knife. We have also added a thumb stud for easy one hand opening. PC is a lightweight, modern folding knife with many superb properties. The blade is made using laminated cobalt special steel which guarantees edge retention beyond the ordinary! The blade is locked in place using a liner lock which is well known to be one of the safest and strongest locks in the world. The fiberglass reinforced grilon handle is internally lined with stainless steel providing extreme strength. With a weight of only 71 grams (2.5 oz) it is comfortable to carry in your pocket and if the knife gets dirty it is easy to clean with a little soap and hot water. The pivot is fixed with greaseless teflon bearings and can be tightened or loosened with a Torx T10 screwdriver. PC is a development of the original model P hence the name. If you are looking for an everyday carry (EDC) knife that uses high end materials at the cutting edge of knife making technology, then PC is the knife for you.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 2.87" inch / 73 mm
Total length: 6.81” inch / 173 mm
Handle length: 3.94” inch / 100 mm
Handle scales: Fiberglass Reinforced Grilon

Blade thickness: 3 mm
Knife weight 70 gr.

Additional Information:

Edge: Flat Ground

Locking: Liner Lock

Laminated CoS: A newly developed high alloy cobalt-special steel

German PUMA Custom Stag Folding Knife

- Made in Solingen / Germany -

Pre-Order available: 

This superb folding knife is ready to ship at May 15th 2025

Introduction:

The Puma Custom has all the features of a traditional pocket knife. A classic back lock ensures safe handling.

Specifications:

Steel: 440A / 55-57 HRC
Blade length: 2.795” inch / 71 mm
Total length: 6.732” inch / 171 mm
Handle length: 3.937” inch / 100 mm
Handle scales: Staghorn
Blade thickness: 3 mm
Overall weight 124 gr.

Additional Information:

– Nickel Silver Bolster

– Back Lock

German PUMA Jagdmesser I. Hunting Folding Knife

- Made in Solingen / Germany -

Introduction:

A traditional hunting pocket knife from PUMA, for opening small and medium game. Also very suitable for light cutting work.

Specifications:

Steel: 440A / 55-57 HRC
Blade length: 2.992” inch / 76 mm
Total length: 6.693” inch / 170 mm
Handle length: 3.701” inch / 94 mm
Handle scales: Staghorn with engraving plate made of nickel silver
Blade thickness: 3 mm
Overall weight 92 gr.

Additional Information: