Hunting Knife

Fallkniven Njord NL3L Hunting Knife

- Made by Fällkniven -

Introduction:

Njord was the god of fertility in the Norse sagas and belonged to the Vanir clan. He was also the god of sailors and fishermen, and the ruler of coasts and beaches. NL3 Njord is a strong, well-balance knife that is a joy to handle. It is hard to find a more attractive all-round knife and its strength of course lies in the laminated VG10 steel. When it comes to the Northern Light Series nothing has been spared to make the knife as strong, beautiful and comfortable as possible. The knife is a pleasure to look at and a thrill to use.

The blade is made out of laminated VG10 steel, where the edge is made of our now renowned VG10 steel and the sides consist of tough, all-stainless 420J2 steel. This combination is good since it brings together all conceivable and desirable properties such as resilience, resistance to torque and edge-durability in a single blade. A 6 mm thick blade in itself would be strong enough for most tasks – with laminate technology one can expect an additional 20% strength in the form of resistance to bending, as compared to an ordinary VG10 blade. The handle consists of specially selected oxhide: sadly a material that is usually overlooked by manufacturers, but which gives a sure and rugged grip. It ages beautifully and as the years pass it acquires an attractive brown patina, and it is unaffected by oil and solvents and impervious to water. Dryness might cause small cracks on the handle but they disappear when the knife is put to use again. We are persisting with the convex edge, since we consider this to be the ultimate combination of cutting performance and edge strength, and of course our NL3 Njord knife features this. Anyone who knows anything about knife making knows that such an edge can only be made by hand, and that’s why 99.99% of all knives don’t have that kind of edge. Each Northern Lights series knife comes with a high-quality black leather sheath.

Specifications:

Steel: Laminated VG10 HRC 59
Blade length: 5.91" inch / 150 mm
Total length: 10.55” inch / 268 mm
Handle length: 4.65” inch / 118 mm
Handle scales: Leather

Blade thickness: 6 mm
Knife weight 266 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather 

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Protruding Protruding Broad Tang

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven Frey NL4L Hunting Knife (New Steel Quality VG7 Wolf)

- Made by Fällkniven -

Introduction:

Specifications:

Steel: VG7 Wolf HRC 59
Blade length: 5.12" inch / 130 mm
Total length: 9.61” inch / 244 mm
Handle length: 4.49” inch / 114 mm
Handle scales: Leather

Blade thickness: 5 mm
Knife weight 199 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather 

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Protruding Protruding Broad Tang

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven Idun NL5L Hunting Knife

- Made by Fällkniven -

Introduction:

In Norse mythology, Idun was the goddess of fertility, and was responsible for guarding the apples that ensured the gods eternal youth. To many, she was also a symbol of love and rebirth, and in a famous poem she was referred to as the lover of the gods (ása leika). Unlike earlier knife models in the Northern Lights series, the NL5 is a little rounder and softer in form, and therefore an excellent choice as a hunting knife. The straight, fairly generous leather grip gives complete control over the powerful laminated VG10 blade. The NL5L is as attractive as it is effective especially in the hands of the experienced hunter. When it comes to the Northern Light Series nothing has been spared to make this knife as strong, beautiful and comfortable as possible. The knife is a pleasure to look at and a thrill to use.

The 5 mm thick blade itself is plenty strong enough for all reasonable tasks, but with the laminate technology one can expect an additional 20% strength in the form of resistance to bending compared to an non-laminated VG10 blade. The beautiful handle consists of specially selected oxhide that gives a sure and rugged grip. It ages with elegance and as the years pass it acquires an attractive brown patina. The handle is unaffected by oil and solvents and impervious to water. When the oxhide drys out, small cracks on the handle can appear, but they disappear when the knife is put to use again. Fallkniven believes the convex edge to be the ultimate combination of cutting performance and edge strength.

Anyone who knows anything about knife making knows that such an edge can only be made by hand, and that’s why 99.99% of all knives don’t have that kind of edge. Each Northern Lights series knife comes with a high-quality black leather sheath.

Specifications:

Steel: Laminated VG10 HRC 59
Blade length: 3.94" inch / 100 mm
Total length: 8.46” inch / 215 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Leather

Blade thickness: 5 mm
Knife weight 170 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather 

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Protruding Broad Tang

FOX European Hunter 2607 Full Tang Hunting Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

Introduction:

With the European Hunter knife Fox-Knives has developed a wonderful hunting knife, which can be used for almost all operations in the hunting and outdoor sector. The 440C steel full tang blade is nearly unbreakable and impresses with its great design.

- Please select your desired version in the selection menu above -

Specifications:

Steel: stainless steel 440C HRC 57-59 
Blade length: 4.13" inch / 105 mm
Total length: 8.86” inch / 225 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Staghorn or Pakkawood  

Blade thickness: 4 mm
Overall weight 130 / 195 gr.

Additional Information:

Blade Coating: Satin

Leather Sheath: Included

Fallkniven Tre Kronor TK2z Hunting Knife

- Made by Fällkniven -

Introduction:

Tre Kronor, the Swedish knife series, offers a highly advanced technological solution combined with timeless Swedish design. As the result of a long development process, we are the first company in the world to be able to offer a laminated knife blade in 3G steel, edged with sintered steel, or powder steel. To this edge steel, we have added a resilient, anticorrosive steel which stabilizes the hard centre. This gives a rigid, strong blade that retains its edge extremely well. These knives are in the Swedish minimalist idiom, where form harmonizes with function. The result is an edged implement that the user will find an easy and accommodating knife — a world-beater from Sweden.

Tre Kronor #2
If price and performance are the deciding factors, then TK2 is the hands-down winner. The secure, comfortable grip and the powerful blade in laminated powder steel form a combination whose value is unparalleled in the world. It is a utility knife which one can rely on and which will perform for you through thick and thin. The knives are delivered in ordinary white box.

Specifications:

Steel: 3G HRC 62
Blade length: 3.94" inch / 100 mm
Total length: 8.46” inch / 215 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Thermorun

Blade thickness: 4,5 mm
Knife weight 185 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Full Tang

Fallkniven Tre Kronor TK2z Hunting Knife

- Made by Fällkniven -

Introduction:

Tre Kronor, the Swedish knife series, offers a highly advanced technological solution combined with timeless Swedish design. As the result of a long development process, we are the first company in the world to be able to offer a laminated knife blade in 3G steel, edged with sintered steel, or powder steel. To this edge steel, we have added a resilient, anticorrosive steel which stabilizes the hard centre. This gives a rigid, strong blade that retains its edge extremely well. These knives are in the Swedish minimalist idiom, where form harmonizes with function. The result is an edged implement that the user will find an easy and accommodating knife — a world-beater from Sweden.

Tre Kronor #2
If price and performance are the deciding factors, then TK2 is the hands-down winner. The secure, comfortable grip and the powerful blade in laminated powder steel form a combination whose value is unparalleled in the world. It is a utility knife which one can rely on and which will perform for you through thick and thin. The knives are delivered in ordinary white box.

Specifications:

Steel: 3G HRC 62
Blade length: 3.94" inch / 100 mm
Total length: 8.46” inch / 215 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Thermorun

Blade thickness: 4,5 mm
Knife weight 185 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather 

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Full Tang

Fallkniven Tungsten Carbine S1z Forest Hunting Knife

- Made by Fällkniven -

Introduction:

The Fallkniven S1 Forest Knife is one of the best knife ever made for outdoor adventure and fishing. The sturdy blade of the S1 made of extremely strong laminated VG10 custom stainless steel. The edge of the S1 is a convex grind for extra strong cutting power. The modified clip point blade shape works extremely well for penetrating tough materials, and the long curved edge is ideal for skinning. The blade of the S1 is long enough for mild chopping work. With a full 5mm (0.2″) thickness, there is little chance the blade could ever break. The checkered handle of the S1 provides an excellent grip in all conditions even when your hands are cold and wet. If you are looking for top quality classic knife, the Fallkniven S1 is one of the best in the world. The injection molded zytel sheath offers a simple, safe and strong combination of qualities that every user will appreciate. The one hand operated zytel sheath is easy to keep clean and available in a  left-handed version for the same price. Another sheath option is our open top dangler black leather sheath.

Specifications:

Steel: Laminated VG10 HRC 59
Blade length: 5.12" inch / 130 mm
Total length: 9.72” inch / 247 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 5 mm
Knife weight 193 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade: Satin Finish

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven Tungsten Carbine S1L Forest Knife

- Made by Fällkniven -

Introduction:

The Fallkniven S1 Forest Knife is one of the best knife ever made for outdoor adventure and fishing. The sturdy blade of the S1 made of extremely strong laminated VG10 custom stainless steel. The edge of the S1 is a convex grind for extra strong cutting power. The modified clip point blade shape works extremely well for penetrating tough materials, and the long curved edge is ideal for skinning. The blade of the S1 is long enough for mild chopping work. With a full 5mm (0.2″) thickness, there is little chance the blade could ever break. The checkered handle of the S1 provides an excellent grip in all conditions even when your hands are cold and wet. If you are looking for top quality classic knife, the Fallkniven S1 is one of the best in the world. The sheath is our open top dangler black leather sheath.

Blade length: 5.12" inch / 130 mm
Total length: 9.72” inch / 247 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 5 mm
Knife weight 193 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade: Satin Finish

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven Tungsten Carbine S1bL Forest Knife

- Made by Fällkniven -

Introduction:

The Fallkniven S1 Forest Knife is one of the best knife ever made for outdoor adventure and fishing. The sturdy blade of the S1 made of extremely strong laminated VG10 custom stainless steel. The edge of the S1 is a convex grind for extra strong cutting power. The modified clip point blade shape works extremely well for penetrating tough materials, and the long curved edge is ideal for skinning. The blade of the S1 is long enough for mild chopping work. With a full 5mm (0.2″) thickness, there is little chance the blade could ever break. The checkered handle of the S1 provides an excellent grip in all conditions even when your hands are cold and wet. If you are looking for top quality classic knife, the Fallkniven S1 is one of the best in the world. The CeraKote is an extremely tough surface coating that will also protect the blade from corrosion. CeraKote is a hard coating made of Teflon and ceramics that we apply for military users and others who want to avoid shiny blades. Be aware, however, that although CeraKote is an industry standard, it is also just a finish applied to the metal blade similar to painting a car. Please note that physical abrasions could scratch through the CeraKote coating. Over time, the black CeraKote may separate from the blade, but more durable coatings make the knife difficult to sharpen and cost up to 100 times more than CeraKote. Attaching a black surface on a rust resistant, perfectly smooth blade so that it sticks for time and eternity is all impossible. We have tested some extremely hard coatings, but they proved to be many times more expensive and make it harder to sharpen the knife. The sheath is our open top dangler black leather sheath.

Blade length: 5.12" inch / 130 mm
Total length: 9.72” inch / 247 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 5 mm
Knife weight 193 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade: Black Coated

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven F1L Pilot Survival Knife

- Made by Fällkniven -

Introduction:

The Fallkniven F1 is the official survival knife Swedish Air Force pilots since 1995. A new world standard was set with the F1 through attention to important details including technical design, ergonomics and economy. The Fallkniven F1 surpasses international standards for strength, personal security capabilities, and value for money. The Fallkniven F1 represents a new philosophy with respect to knives for survival use. The F1 successfully combines the experience of generations of knife manufacturing with the most modern technology and forging. The well-thought-out design and incredibly tough laminated steel are only two of the many details making the handy-sized Fallkniven F1 a knife you can always you can rely on even with your life. The F1 is well proportioned and tremendously versatile. The safe, comfortable grip along with its hard and tough laminated steel blade makes the F1 knife incredibly useful for all types of daily work and demanding tasks. The full cover leather sheath is made from high-quality black leather, and it safely contains the entire knife.

Specifications:

Steel: Laminated VG10 HRC 59
Blade length: 3.82" inch / 97 mm
Total length: 8.27” inch / 210 mm
Handle length: 4.45” inch / 113 mm
Handle scales: Thermorun

Blade thickness: 4.5 mm
Knife weight 153 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade Finish: Satin

VG10: A well known high alloy molybdenum/cobalt steel