Hunting Knife

German PUMA White Hunter Classic Hunting Stag Knife

Made in Solingen / Germany

Introduction:

The Puma White Hunter is a German-made knife designed in collaboration with the East African Pro Hunter's Association for hunting big game. Hand-crafted in Solingen, a city famous for its superb blade craftsmanship, the clip-point blade is made from German stainless steel with a full tang and genuine staghorn handle. Each knife meets 55-57 HRC for strength, durability, and easy sharpening. Aluminum bolster. Included leather sheath with belt loop and secure snap-clasp..

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 6,102 " inch / 155 mm
Total length: 10-5/8 " inch / 270 mm
Handle length: 4,527 " inch / 115mm
Handle scales: Stag Horn
Blade thickness: 5 mm
Net weight 240 gr.

Description:

The handles for this knife are made from finest stag horn.

PUMA Hunter's Pal Hunting Knife

- Made in Solingen / Germany -

Introduction:

The PUMA "Hunter's Pal" is the perfect companion for hunting.

Specifications:

German PUMA Cougar Collectors Hunting Knife 

Made in Solingen / Germany -

Introduction:

The Puma Cougar collector knife, is probably one of the most elegant hunting knives ever. The "Cougar wood" knife is a real designer piece that cuts just as fine a figure in use as it does in the collector's showcase - from PUMA Solingen.

The "cougar" model was designed by Richard Hehn, one of Germany's most renowned knifemakers. For decades in the PUMA program, it has not lost its myth to this day.

The blade is made of the stainless steel DIN 1.4112 and hardened up to 57 HRC.

The construction of the knife is also a special feature: The blade and the one-piece handle manufactured in the steel investment casting process are separate elements that are joined together in a special process. For this purpose, the blade has a short flat, which is taken up by the handle through an opening and riveted firmly there. Subsequently, the rivet joint on both sides is provided with a polished steel cap, which bears our company logo, the well-known rhombus with the head of the Puma.

Specifications:

Steel: 440B / 55-57 HRC
Blade length: 6.496” inch / 165 mm
Total length: 11.417” inch / 290 mm
Handle length: 4.921” inch / 125 mm
Handle scales: Plum Wood
Blade thickness: 5.5 mm
Overall weight 320 gr.

Additional Information:

– Leather Sheath Included

– Hole for Safety Cord

– Hand guard

– Designed by R. Hehn

German PUMA White Hunter 240 Hunting Stag Knife

- Made in Solingen / Germany -

Introduction:

Puma "White Hunter 240 stag" is a further development of the classic with tried and tested universal blade for the strongest demands - from PUMA Solingen.

The PUMA "White Hunter 240" is a new version of the well-known classic. On the occasion of our 240th company anniversary, we have reworked it and modified it according to the latest ergonomic findings, but without changing the proven characteristics of the original model. The sturdy tip is robust enough to open cans or pry open crown caps. A hatchet edge is ground into the center of the back of the blade for coarse work such as splitting firewood or chopping bones. Our "white hunter 240" in this version is equipped with deer horn handle scales, which are firmly riveted to the tang that goes fully through the handle. With all these attributes, this successful model from the house of PUMA is and remains an innovative knife that is suitable for all conceivable applications.

Specifications:

Steel: 440 C / 57-60 HRC
Blade length: 6.220” inch / 158 mm
Total length: 10.787” inch / 274 mm
Handle length: 4.567” inch / 116 mm
Handle scales: Stag horn
Blade thickness: 4 mm
Overall weight 302 gr.

Additional Information:

– Leather Sheath Included

– Designed by H.P. Knoop

– Hand guard

– Strap Eye for the sheath

– Nickel Silver Bolsters

German PUMA Olo Hunting Knife

- Made in Solingen / Germany -

Introduction:

Anyone who loves our model 117081 "ben" will also like the new PUMA "olo". The "ben" serving as a model comes from a design by Olaf Zwätz and emerged as the winner of a joint design competition with "Messer Magazin". Now we have also released this shapely knife as an outdoor version with scales made of robust, black Micarta with a red fiber lining. The one-piece blade of the PUMA "olo" is made of stainless high-performance steel CPM S90V (60-62 HRC), the associated belt sheath is made of Kydex and has a detachable belt loop.

Specifications:

Steel / hardness: CPM S90V / 60-62 HRC
Blade length: 3.858” inch / 98 mm 
Total length: 8.267” inch / 210 mm 
Handle length: 4.409” inch / 112 mm
Handle scales: Micarta
Blade thickness: 3 mm
Overall weight 156 gr.

Design: Olaf Zwätz

Additional Information:

– Kydex Sheath Included

German PUMA White Hunter "Elephant" Hunting Knife

Made in Solingen / Germany

Introduction:

The PUMA “White Hunter” is an ultimate classic with a universal blade that has been tried and tested for decades to meet the toughest demands - handmade in Solingen.

Developed in 1956 for the East African hunting organization EAPHA, the PUMA “white hunter” quickly became known worldwide as the ultimate outdoor knife and is now regarded as an extremely popular classic. Its blade shape has been carefully thought out and effortlessly meets every conceivable requirement. The sturdy tip is robust enough to open cans or pry open crown caps. A hatchet edge is ground into the middle of the back of the blade for rough work, such as splitting firewood or chopping bones. The blade also has a practical saw tooth at the back of the cutting edge for cutting green branches, fish skin or similar material with a firm surface. The model in this classic version is fitted with elegant scales made of white Elforyn Super Tusk, which are firmly riveted to the tang that runs all the way through the handle. With all these attributes, the original “white hunter” is an innovative knife that is still unrivaled today.

Another highlight of the white hunter Elefant version is the beautiful laser engraving on the blade. The knives are numbered in advance. The numbers are assigned after the order is received. It is therefore not possible to select a serial number. 

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 6,102 " inch / 155 mm
Total length: 10-5/8 " inch / 270 mm
Handle length: 4,527 " inch / 115mm
Handle scales: Elforyn Super Tusk
Blade thickness: 5 mm
Net weight 263 gr.

German PUMA White Hunter Classic Hunting Knife "BUFFALO HORN"

Made in Solingen / Germany

Introduction:

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 6,102 " inch / 155 mm
Total length: 10-5/8 " inch / 270 mm
Handle length: 4,527 " inch / 115mm
Handle scales: Buffalo Horn
Blade thickness: 6 mm
Net weight 259 gr.

Description:

The handle scales for this knife are made from finest buffalo horn.

Black leather sheath.

German PUMA Saubart Hunting Knife

- Made in Solingen / Germany -

Introduction:

The Puma Saubart knife is a handy and short, yet very powerful knife in full-tang construction for universal use - from PUMA Solingen.

The PUMA “saubart” offers the user many advantages due to the following features:

Sandvik stainless steel 14C28N is used as blade material, which brings it to a Rockwell hardness of 60-62 HRC, which gives the knife a high cutting strength.

The new blade shape, previously tested by hunters, allows the use of the complete cutting surface. In addition, the blade back is provided with a ground phase.

With a blade length of 100 mm and a thickness of 3 mm, the knife is compact and allows practical handling. Thanks to the solid construction, the “saubart” is also very stable.

Hirschhorn was chosen for the handle formwork. Thanks to the pronounced finger grooves in combination with the strong gag made of nickel silver, this high-quality PUMA knife provides a secure grip when working with it.

A brown saddle leather sheath is supplied for safe driving and transport.

Specifications:

Steel: Sandvik 14C28N / 60-62 HRC
Blade length: 3.937” inch / 100 mm
Total length: 8.346” inch / 212 mm
Handle length: 4.409” inch / 112 mm
Handle scales: Staghorn & Pakka Wood
Blade thickness: 3 mm
Overall weight 211 gr.

Additional Information:

– Leather Sheath Included

– Hole for Safety Cord

– Hand guard

PUMA Hunter Eiche Hunting Knife With Oak Wood Handle

- Made in Solingen / Germany -

Introduction:

The Puma "Hunter Eiche" looks very similar to its brother Puma Hunters Pal. On the Hunter Eiche, Puma has only equipped the handle scales with oak wood instead of stag horn.

Specifications:

German PUMA Reh Hunting Stag Knife

- Made in Solingen / Germany -

Introduction:

The Puma Reh knife belongs to the traditionally manufactured hunting nickers and is a classic hunting companion in German hunting grounds - from PUMA Solingen.

The PUMA "Reh" is a classic nicker made of stainless steel in a stable, forged design. Blade, hand guard and flat form a single unit and are only complemented by the deer horn scales. The term "Nicker" originates from its original function as a "neck catcher". Due to its intended purpose, the traditionally designed blade is very pointed and widens continuously towards the back in the direction of the handle. This is the form in which the Nicker has been found in our pattern books for well over a hundred years.

Specifications:

Steel: 1.4034 / 52-54 HRC
Blade length: 3.858” inch / 98 mm
Total length: 8.071” inch / 205 mm
Handle length: 4.213” inch / 107 mm
Handle scales: stag horn
Blade thickness: 3.5 mm
Overall weight 95 gr.

Additional Information:

– Leather Sheath with Metal fittings Included

– Hand guard

German PUMA White Hunter "Lion" Hunting Knife

Made in Solingen / Germany

Introduction:

The "White Hunter" is an ultimate classic hunting knife with decades of proven universal blade for the strongest demands - Handmade in Solingen.

Developed in 1956 for the East African hunting organization Eapha, the Puma "White Hunter" quickly became known as the ultimate outdoor knife worldwide and is now considered an extremely popular classic. His blade shape is well thought out and effortlessly meets all conceivable requirements. The stable tip is robust enough to open cans or pry over crown corks. In the middle of the back of the blade is a cap cut, which is used for rough work, such as firewood columns or chopping bones. In addition, the blade has a practical saw toothing in the rear area of the cutting edge to cut green branches, fish skin, or similar material with a solid surface. 

This classic model features high-quality Plum and Olive wood with brass inlayn in handle that are securely attached to the knife's tang. The knife is made from a single piece of steel, which runs continuously from the tip of the blade through the whole handle. With these outstanding qualities, the original "White Hunter" remains an innovative knife that is still unparalleled today.

Another highlight of the white hunter LION version is the beautiful laser engraving on the blade. The knives are numbered in advance. The numbers are assigned after the order is received. It is therefore not possible to select a number. 

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 6,102 " inch / 155 mm
Total length: 10-5/8 " inch / 270 mm
Handle length: 4,527 " inch / 115mm
Handle scales: Plum and olive wood with brass inlayn
Blade thickness: 6 mm
Net weight 259 gr.

German PUMA DAGGA BOY Hunting Knife

- Made in Solingen / Germany -

Introduction:

The Puma"Dagga" is a heavy, robust and yet shapely hunting knife that is not too bad for any task - from PUMA Solingen.

Knives used for hunting should have good stability. This insight was consistently implemented in our PUMA "dagga". The result is a heavy hunting all-rounder with a strong flat-ground blade whose full tang is fitted with voluminous buffalo horn scales. A guard made of solid nickel silver serves as hand protection. These features make the "dagga" model suitable for heavier cutting tasks and will not let its owner down in any situation.

A brief explanation of the name of the knife: “Dagga Boy” is a term used mainly in the context of safaris in Africa to describe an old, solitary male buffalo. The word “dagga” comes from Zulu and means mud, referring to the preference of these buffalo to spend time in muddy waters to protect themselves from insects, among other things. Dagga Boys are known for their unpredictability and can be quite dangerous. Such a strong name for a powerful hunting knife!

Since we process natural products, optical deviations between knife illustration and the originals are possible.

Specifications:

Steel: 440A / 55-57 HRC
Blade length: 5.118” inch / 130 mm
Total length: 10.236” inch / 260 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Buffalo horn
Blade thickness: 4 mm
Overall weight 343 gr.

Additional Information:

– Leather Sheath & Wooden Box Included

– PUMA Design

German PUMA Unicum Collectors Hunting Knife

- Handcrafted in Solingen / Germany -

Serial number: #71

Introduction:

Specifications:

Blade length: 3.937" inch / approx. 100 mm
Handle length: 4.055" inch / approx. 103 mm
Steel: Sandvik 14C28N - 60°-62° HRC
Total length: 7.992" inch / approx. 203 mm
Knife weight: 132 g
Scales: Pakka Wood
Sheath: Leather

German PUMA Waidmann Hunting Knife

- Made in Solingen / Germany -

Introduction:

The PUMA waidmann is truly an impressive hunting knife!

It not only combines functionality with appealing design but also offers excellent handling thanks to the olive wood scales and the nickel silver bolsters. The fact that it is suitable for various applications in the field makes it a versatile tool that is useful both for hunting and in outdoor activities. Additionally, each knife is unique due to the distinctive grain of the wood, making it a special piece.

Specifications:

Steel: 1.4116 stainless steel / 55-57 HRC
Blade length: 4.685” inch / 119 mm 
Total length: 9.212” inch / 234 mm 
Handle length: 4.527” inch / 115 mm
Handle scales: Olive Wood
Blade thickness: 3 mm
Overall weight 179 gr.

Additional Information:

– Leather Sheath Included

– Hand guard

PUMA Jagdnicker / Frevert Hunting Knife with Walnut wood handle.

- Made in Solingen / Germany -

Introduction:

The "Jagdnicker according Frevert" was already developed in the middle of the last century and belongs to the classic hunting knives - from PUMA Solingen.

As is well known, legends never die! The "small Jagdnicker according Frevert" from PUMA has been an integral part of hunting equipment for decades and has not lost its relevance in terms of design and functionality to this day. The blade with in the place area sharpened phase is extremely stable held and therefore not only suitable for the red work but also different uses in the hunting ground. The walnut handle scales are underlaid with fiber and the nickel silver bolsters make this high-quality, classic hunting knife particularly safe to handle. The matching leather belt sheath is equipped with two safety straps incl. pressure head lock.

Specifications:

PUMA Jagdnicker Hunting Knife

- Made in Solingen / Germany -

Introduction:

PUMA Jagdnicker Olive Wood Hunting Knife

- Made in Solingen / Germany -

Introduction:

German Puma White Hunter 240 Olive Hunting Knife

- Made in Solingen / Germany -

Introduction:

The PUMA White Hunter 240 with Olive Wood Handle is equipped with a proven White Hunter blade made of stainless steel 1.4116. The PUMA white hunter 240 was developed by us for the 240th anniversary of the company. Modified according to the latest ergonomic findings, it has lost none of its charm. This offers a thumb rest on the back of the knife, which ensures a safe transmission of force during heavy cutting work. The solid handle features beautifully figured Olive wood scales and large brass rivets. A pronounced hand guard provides the necessary safety.

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 6,102 " inch / 157 mm
Total length: 10-5/8 " inch / 273 mm
Handle length: 4,527 " inch / 116mm
Handle scales: Olive Wood
Blade thickness: 4 mm
Net weight 278 gr.