Special Offers

Fallkniven "F2z" Pescador Fish Fillet Knife

- Made by Fällkniven -

Introduction:

This knife has a broad range of use. The short, fairly slender blade works well for filleting, cutting and cleaning fish. The short blade makes the knife  a favourite in the kitchen. It cuts anything quickly and precisely.

F2, F3 and F4 are a concept of high-quality knives intended for opening, butchering and cleaning fish. They are based on the well shaped, secure F handle, and to that we have developed three blade shapes, each adapted to its special purpose. Unlike many other manufacturers we persist in using really good edge steel and even if it leads to products that are 5 or 10 times more expensive, we feel that the concept is right. A cheap dressing knife is characterised by poor edge retention, leading to it fairly soon being honed to destruction, while a knife from us can be used for decades. Not only does this lead to good overall economy, but it also offers satisfaction and safety at work. Naturally, it should not be put away after the hunting, but can also serve its purpose in the kitchen. The knives are supplied with a zytel sheath. The best, simplest and quickest way to sharpen them is with a diamond whetstone or diamond sharpening steel.

Specifications:

Steel: Laminated VG10 HRC 59
Blade length: 4.33" inch / 110 mm
Total length: 9.06” inch / 230 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Thermorun

Blade thickness: 2.5 mm
Knife weight 89 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Broad Tang

Blade Finish: Satin

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven F3z Carnicero Butcher Knife

- Made by Fällkniven -

Introduction:

This is the perfect dressing and skinning knife! The form of the blade is ideal to skin somewhat larger game and then open it before hanging. Since the edge can be made thin without losing in strength, the edge will easily part the thickest skin, which the user should perhaps bear in mind – to avoid mishaps.

F2, F3 and F4 are a concept of high-quality knives intended for opening, butchering and cleaning fish. They are based on the well shaped, secure F handle, and to that we have developed three blade shapes, each adapted to its special purpose. Unlike many other manufacturers we persist in using really good edge steel and even if it leads to products that are 5 or 10 times more expensive, we feel that the concept is right. A cheap dressing knife is characterised by poor edge retention, leading to it fairly soon being honed to destruction, while a knife from us can be used for decades. Not only does this lead to good overall economy, but it also offers satisfaction and safety at work. Naturally, it should not be put away after the hunting, but can also serve its purpose in the kitchen. The knives are supplied with a zytel sheath. The best, simplest and quickest way to sharpen them is with a diamond whetstone or diamond sharpening steel.

Specifications:

Steel: Laminated VG10 HRC 59
Blade length: 5.12" inch / 130 mm
Total length: 9.84” inch / 250 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Thermorun

Blade thickness: 2.5 mm
Knife weight 101 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Broad Tang

Blade Finish: Satin

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven F4z Fileteador Butcher Knife

- Made by Fällkniven -

Introduction:

This is the perfect dressing and skinning knife! The form of the blade is ideal to skin somewhat larger game and then open it before hanging. Since the edge can be made thin without losing in strength, the edge will easily part the thickest skin, which the user should perhaps bear in mind – to avoid mishaps.

F2, F3 and F4 are a concept of high-quality knives intended for opening, butchering and cleaning fish. They are based on the well shaped, secure F handle, and to that we have developed three blade shapes, each adapted to its special purpose. Unlike many other manufacturers we persist in using really good edge steel and even if it leads to products that are 5 or 10 times more expensive, we feel that the concept is right. A cheap dressing knife is characterised by poor edge retention, leading to it fairly soon being honed to destruction, while a knife from us can be used for decades. Not only does this lead to good overall economy, but it also offers satisfaction and safety at work. Naturally, it should not be put away after the hunting, but can also serve its purpose in the kitchen. The knives are supplied with a zytel sheath. The best, simplest and quickest way to sharpen them is with a diamond whetstone or diamond sharpening steel.

Specifications:

Steel: Laminated VG10 HRC 59
Blade length: 5.91" inch / 150 mm
Total length: 10.63” inch / 270 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Thermorun

Blade thickness: 2.5 mm
Knife weight 101 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Broad Tang

Blade Finish: Satin

VG10: A well known high alloy molybdenum/cobalt steel

FOX Bushman FX-609 OD Bushcraft Knife

- Made by Fox Knives in Italy -

- Design by: "FOX Knives" -

Introduction:

The Fox Bushman knife, is an incredibly strong bushcraft knife that is almost unbreakable and can withstand the toughest challenges. The Bushman leather sheath can be used both in vertical and horizontal position thanks to the separable loops.

Specifications:

Steel: D2 stainless steel HRC 59-61
Blade length: 6.30" inch / 160 mm
Total length: 11.42” inch / 290 mm
Handle length: 5.12” inch / 130 mm
Handle scales: Canvas Micarta OD Green

Blade thickness: 5 mm
Overall weight 370 gr.

Additional Information:

Blade Coating: Black Idroglider stone washed

Leather Sheath: Included

Handle: Hole for Safety Cord

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.

FOX Chiroptera Karambit FX-590 Folding Knife

- Made by Fox Knives in Italy -

Design by: "Richard Derespina"

Introduction:

I based this Karambit’s blade profile on a Bat’s Wing (Chiroptera). The blade like the Bat’s wing is an extension of the user. Humans, however, must train to become comfortable with the blade, thereby creating the necessary muscle memory for instinctive responses.

Richard Derespina

“I have been making Karambits since 1999. My design is ergonomic and geometry”.

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 2.56" inch / 65 mm
Total length: 6.10” inch / 155 mm
Handle length: 3.54” inch / 90 mm
Handle scales: G10 black

Blade thickness: 3 mm
Overall weight 110 gr.

Additional Information:

Blade Coating: Cerakote™ black

Clip: stainless steel 420J2B - reversible

Back Ring: T6-6082 aircraft aluminum

FOX Combat Jungle FX-133 MGT Bushcraft Hunting Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives"

Introduction:

Here we offer a very robust bushcraft, outdoor and survival knife from Fox-Knives. The blade is made of high quality and durable Böhler-N690 steel, which has a Rockwell hardness of 58°-60° HRC. The full tang construction guarantees a very high stability. The complex Cordura scabbard guarantees a secure hold on the thigh.

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 7.48" inch / 190 mm
Total length: 12.60” inch / 320 mm
Handle length: 5.12” inch / 130 mm
Handle scales: Canvas Micarta OD Green 

Blade thickness: 6 mm
Overall weight 365 gr.

Additional Information:

Blade Coating: Black Idroglider

Leather Sheath: Included

Handle: Hole for Safety Cord

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.

FOX "Fairbairn Sykes FX-593" Dagger

- Made by Fox Knives in Italy -

Design by: "Hill Knives".

Introduction:

Hill Knives:

“Dutch Commando Dagger is Based on the original Fairbairn Sykes design. It is a collector’s knife to honor the special forces of the world.”

The Dutch Knifemaking company Hill Knives was founded in 1979 by Frans van den Heuvel † (father) and Albert van den Heuvel (son), who both have a technical background as toolmakers. “What makes Hill Knives extraordinary is our passion and drive to create the ultimate quality and design when it comes to our knives".

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 6.69" inch / 170 mm
Total length: 11.81” inch / 300 mm
Handle length: 5.12” inch / 130 mm
Handle: Walnut wood

Blade thickness: 5 mm
Overall weight 180 gr.

Additional Information:

Blade Coating: Satin

Leather Sheath: Included

FOX FKMD Sputnik 10 FX-810 B Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

Introduction:

The new series Sputnik especially shines with particularly high use value and an extremely secure grip. The rubbery Forprene handle the Sputnik models are to handle even when wet or cold very comfortable and safe, including the numerous depressions and grooves to play their part. The small built-in guard also carries an eyelet as the glass breaker in the grip end, whereby the Sputnik example can be tied also to a stick. The blade of N690Co is Cerakote-coated and optimally dimensioned with thickness from 5mm to combine cutting potential and stability. The highly functional symmetrical sheath is made of fiberglass and is located in a MOLLE compatible nylon holder with belt loop and detachable leg straps.

- Glass breaker tempered stainless steel 420 -

Developed in collaboration with: MEMOTEK

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 4.72" inch / 120 mm
Total length: 9.65” inch / 245 mm
Handle length: 4.92” inch / 125 mm
Handle scales: TPR black

Blade thickness: 5 mm
Overall weight 215 gr.

Additional Information:

Blade Coating: Cerakote™ black

Sheath: Included with MOLLE system

Handle: Anodized aluminum cap and wrench key included

Cerakote™
It Is a ceramic based finish that can be applied to metals, enhance a number of physical performance properties including abrasion/wear resistance, corrosion resistance, chemical resistance, impact strength and hardness.

FOX FX-525 OL or  FX-525 B or FX-525 BE Terzuola Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bob Terzuola".

Introduction:

Bob Terzuola:

"I always design my knives to be functional but graceful. Utility is always the main factor in my designs as a knife should be perfectly useful and comfortable in a variety of positions and cutting situations”.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.35" inch / 85 mm
Total length: 7.87” inch / 200 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Olive wood / Bocote wood  / Birch wood  

Blade thickness: 3 mm
Overall weight 100 gr.

Additional Information:

Blade Coating: satin