€150 to €250

Fallkniven Tungsten Carbine S1x Knife

- Made by Fällkniven -

Introduction:

Your X-knife is the strongest, sharpest and safest stainless steel knife in production. If your life is in danger, you can always rely on your X-knife. It is designed to withstand all the stresses applied by the human hand, which means that it is virtually indestructible. It assumes, however, that you are careful with the knife and that it is used  as intended, namely as a sharp precision tool. They have put a lot of energy into designing a safe knife sheath, which is actually where the knife will spend most of its time. The design of the sheath determines the access to the knife, and here we have really put all our efforts in order to get a safe sheath that allows easy access to the knife. The sheath has both a transport lock (the folding bracket with a strap) and a working safety detail that allows the knife to be in place until you decide to use it. It is a bit a belt-and-braces approach, but we like putting safety first – a lost knife is of no use. The transport lock will therefore allow the knife to be fastened tip-up or tip-down on the body or on your equipment without any risk.

Steel: Laminated CoS HRC 60

Blade length: 5.20" inch / 132 mm
Total length: 9.80” inch / 249 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 6 mm
Knife weight 290 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Full Tang

Blade: Satin Finish

Laminated CoS: A newly developed high alloy cobalt-special steel

FOX FKMD Sputnik 10 FX-810 B Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

Introduction:

The new series Sputnik especially shines with particularly high use value and an extremely secure grip. The rubbery Forprene handle the Sputnik models are to handle even when wet or cold very comfortable and safe, including the numerous depressions and grooves to play their part. The small built-in guard also carries an eyelet as the glass breaker in the grip end, whereby the Sputnik example can be tied also to a stick. The blade of N690Co is Cerakote-coated and optimally dimensioned with thickness from 5mm to combine cutting potential and stability. The highly functional symmetrical sheath is made of fiberglass and is located in a MOLLE compatible nylon holder with belt loop and detachable leg straps.

- Glass breaker tempered stainless steel 420 -

Developed in collaboration with: MEMOTEK

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 4.72" inch / 120 mm
Total length: 9.65” inch / 245 mm
Handle length: 4.92” inch / 125 mm
Handle scales: TPR black

Blade thickness: 5 mm
Overall weight 215 gr.

Additional Information:

Blade Coating: Cerakote™ black

Sheath: Included with MOLLE system

Handle: Anodized aluminum cap and wrench key included

Cerakote™
It Is a ceramic based finish that can be applied to metals, enhance a number of physical performance properties including abrasion/wear resistance, corrosion resistance, chemical resistance, impact strength and hardness.

FOX FKMD Sputnik 13 FX-813B Military Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

* Please request availability *

Introduction:

The new series Sputnik especially shines with particularly high use value and an extremely secure grip. The rubbery Forprene handle the Sputnik models are to handle even when wet or cold very comfortable and safe, including the numerous depressions and grooves to play their part. The small built-in guard also carries an eyelet as the glass breaker in the grip end, whereby the Sputnik example can be tied also to a stick. The blade of N690Co is Cerakote-coated and optimally dimensioned with thickness from 5mm to combine cutting potential and stability. The highly functional symmetrical sheath is made of fiberglass and is located in a MOLLE compatible nylon holder with belt loop and detachable leg straps.

- Glass breaker tempered stainless steel 420 -

Developed in collaboration with: MEMOTEK

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 6.02" inch / 153 mm
Total length: 11.02” inch / 280 mm
Handle length: 5.00” inch / 127 mm
Handle scales: TPR black

Blade thickness: 5 mm
Overall weight 245 gr.

Additional Information:

Blade Coating: Cerakote™ black

Sheath: Included with MOLLE system

Handle: Anodized aluminum cap and wrench key included

Cerakote™
It Is a ceramic based finish that can be applied to metals, enhance a number of physical performance properties including abrasion/wear resistance, corrosion resistance, chemical resistance, impact strength and hardness.

FOX FKMD Sputnik 5 FX-805B Military Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

* Please request availability *

Introduction:

The new series Sputnik II. especially shines with particularly high use value and an extremely secure grip. The rubbery Forprene handle the Sputnik models are to handle even when wet or cold very comfortable and safe, including the numerous depressions and grooves to play their part. The small built-in guard also carries an eyelet as the glass breaker in the grip end, whereby the Sputnik example can be tied also to a stick. The blade of N690Co is Cerakote-coated and optimally dimensioned with thickness from 5mm to combine cutting potential and stability. The highly functional symmetrical sheath is made of fiberglass and is located in a MOLLE compatible nylon holder with belt loop and detachable leg straps.

- Glass breaker tempered stainless steel 420 -

Developed in collaboration with: MEMOTEK

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 5.43" inch / 138 mm (Part. Serrated)
Total length: 10.24” inch / 260 mm
Handle length: 4.80” inch / 122 mm
Handle scales: TPR black

Blade thickness: 5 mm
Overall weight 225 gr.

Additional Information:

Blade Coating: Cerakote™ black

Sheath: Included with MOLLE system

Handle: Anodized aluminum cap and wrench key included

Cerakote™
It Is a ceramic based finish that can be applied to metals, enhance a number of physical performance properties including abrasion/wear resistance, corrosion resistance, chemical resistance, impact strength and hardness.

FOX Rescue Karambit FX-599 RSY or FKMD FX-599 RS Folding Knife

- Made by Fox Knives in Italy -

Design by: "Fox Knives".

Introduction:

1.) The FOX FX-599 RSY Rescue Karambit is a folding knife with N690Co stainless steel blade stone washed surface treatment, Practical carabiner made from the red aluminum ring, glass breaker punch and Phillips screwdriver in the upper part of the blade. G10 UV (Reactive) yellow handle CNC machined with rough textured for a non "slip grip". With reversible stainless steel clip. This rescue and emergency knife impresses also with its stability.

2.) FKMD FOX FX-599 RS KARAMBIT Tactical Knife. Black Idroglider® surface treatment, which ensures smoothness and long duration - G10 black handle CNC machined with rough textured for a "non slip" grip. Complete with reversible stainless steel clip - FKMD Knives FOX Knives Military Division.

- Please select your desired version from the drop-down menu above -

Blade thickness: 3 mm
Overall weight 110 gr.

Additional Information:

Blade Coating: Satin / Cerakote™ black

Clip: stainless steel 420J2B - reversible

Back Ring: T6-6082 aircraft aluminum

FOX FKMD PREDATOR Spetsnaz FX-G4B Military Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

Introduction:

Developed in collaboration with: DENDRA

The Fox Predator, is a beautifully designed combat knife, which convinces on the one hand by its beautiful lines, but also by its very high quality workmanship.

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 6.69" inch / 170 mm
Total length: 11.81” inch / 300 mm
Handle length: 5.12” inch / 130 mm
Handle scales: FORPRENE® black

Blade thickness: 6 mm
Overall weight 300 gr.

Additional Information:

Blade Coating: Black Idroglider

Handle: Hole for Lanyard

Blade: Plain Blade

Sheath: NYLON 1000D with MOLLE system

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.

FOX Recon FX-512 OD Military Knife

- Made by Fox Knives in Italy -

Design by: "Alessandro Zanin".

Introduction:

“The Recon has the basic features for a good combat knife: agility, power and lethality in trained hands. Its special shape facilitates fluidity and harmony in the body/blade movement without fatiguing the hand that wields it. It is an agile and comfortable knife in every grip (ice pick, sabre grip, slash,…). The choice of Kydex sheath with its retention system allows a safe use in all conditions (tactical/combat, hunting, survival, rescue).”

Alessandro Zanin

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 4.72" inch / 120 mm
Total length: 10.43” inch / 265 mm
Handle length: 5.71” inch / 145 mm
Handle scales: Green Micarta

Blade thickness: 5 mm
Overall weight 300 gr.

Additional Information:

Blade Coating: bead blasted

KYDEX Sheath: Included

Handle: Lanyard Hole

FOX Rimor FX-9CM07 Military Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives"

Introduction:

We have in our collection this a very sturdy Military knife from Fox-Knives. The knife has been specially designed for heavy use. A Full Tang knife, which leaves nothing to be desired in the outdoor area.

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 6.89" inch / 175 mm
Total length: 12.01” inch / 305 mm
Handle length: 5.12” inch / 130 mm
Handle scales: FRN® black

Blade thickness: 6 mm
Overall weight 360 gr.

Additional Information:

Blade Coating: Stone washed

Leather Sheath: Included

Handle: Lanyard Hole

FOX "Rimor FX-9CM07 OD" Military Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives"

Introduction:

We have in our collection this a very sturdy Military knife from Fox-Knives. The knife has been specially designed for heavy use. A Full Tang knife, which leaves nothing to be desired in the outdoor area.

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 6.89" inch / 175 mm
Total length: 12.01” inch / 305 mm
Handle length: 5.12” inch / 130 mm
Handle scales: FRN® OD green

Blade thickness: 6 mm
Overall weight 360 gr.

Additional Information:

Blade Coating: Black Idroglider

Leather Sheath: Included

Handle: Lanyard Hole

Idroglider:

Special nonstick coating made of PTFE that ensures long life and rust resistance.

FOX FKMD Taranis FX-0171114 Military Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

*Please request availibility*

Introduction:

The Fox Taranis, is a beautifully designed tactical knife, which convinces on the one hand by its beautiful lines, but also by its very high quality workmanship.

Developed in collaboration with: DENDRA

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 7.28" inch / 185 mm
Total length: 12.60” inch / 320 mm
Handle length: 5.31” inch / 135 mm
Handle scales: FORPRENE® black

Blade thickness: 5 mm
Overall weight 304 gr.

Additional Information:

Blade Coating: Black Idroglider  

Blade: Plain Blade

Sheath: NYLON 1000D with MOLLE system

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.

FOX FKMD Taranis FX-0171115 Military Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

Introduction:

The Fox Taranis, is a beautifully designed desert knife, which convinces on the one hand by its beautiful lines, but also by its very high quality workmanship.

Developed in collaboration with: DENDRA

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 7.28" inch / 185 mm
Total length: 12.60” inch / 320 mm
Handle length: 5.31” inch / 135 mm
Handle scales: FORPRENE® OD green

Blade thickness: 5 mm
Overall weight 304 gr.

Additional Information:

Blade Coating: Coyote tan Idroglider 

Blade: Plain Blade

Sheath: NYLON 1000D with MOLLE system

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 6.69" inch / 170 mm
Total length: 12.60” inch / 320 mm
Handle length: 5.91” inch / 150 mm
Handle scales: Green Micarta

Blade thickness: 5 mm
Overall weight 315 gr.

Additional Information:

Blade Coating: Bead blasted

Handle: Hole for Lanyard

Blade: Additional teeth on the spine

Sheath: KYDEX®