€150 to €250

Böker Solingen Applegate-Fairbairn Boot Knife

- Made in Solingen / Germany -

Introduction:

The various versions of the Boker Applegate-Fairbairn have been convincing special forces all over the world for years and have emerged as an icon among tactical knives. The knife goes back to the classic Fairbairn-Sykes dagger from World War II and was designed by Col. Rex Applegate. The elite soldier coordinated secret operations throughout Europe during the war and even became President Franklin D. Roosevelt's personal guard. He trained Allied Special Forces in close combat and founded the "School for Spies and Assassins" in today's Camp David. Later he continued to work as a consultant and trainer, wrote numerous books about close quarter combat and began to develop and improve the perfect combat knife.

The smaller and thus more handy version of the Applegate-Fairbairn has been developed according to the same concept as its big brother. Fiberglass-reinforced Delrin handle with integrated stainless steel weights, brass cross-guard and 440C blade steel. The blade has on the one side a typical double conical dagger grind and on the other side a hollow grind. Delivery includes a Kydex sheath and a large Tek-Lok.

Specifications:

Steel: 440C
Blade length: 4.645“ inch / 118 mm
Total length: 8.976” inch / 228 mm
Handle length: 4.330" inch / 110 mm
Handle scales: FRP

Blade Thickness: 4.67 mm
Overall weight 170 gr.

German Böker "Scout Buffalo" Pocket Folding Knife

- Made in Solingen / Germany -

Introduction:

The Boker Scout has been firmly connected to our name since 1985. No one can say today if anyone would have expected that the pocket knife would be one of the most successful and popular Knifes from our range. But these many years in short-lived fads, that are also not unusual on the knife market, is definitely special. While no other model has had as many versions as the Scout over the years, the basic specifications never changed. The extremely stable body is from a single piece nickel silver which is produced by sintering. The hollow ground blade made of stainless N690 contributes with its memorable shape to the incomparable appearance of the Scout. A classic Backlock keeps the blade safely open. When the knife is opened, the spine locks into a notch on the back of the blade. To close the knife, push down the exposed part of the spine. The harmonic overall impression of this classic is completed by pleasantly shaped handle scales made of Buffalo Horn, which are elaborately hand polished to a high gloss.

Specifications:

Steel: N690
Blade length: 3.149“ inch / 80 mm
Total length: 7.244” inch / 184 mm
Handle length: 4.094" inch / 104 mm
Handle scales: Buffalo Horn / Nickel Silver

Blade Thickness: 3 mm
Overall weight 160 gr.

German Böker "Scout Stag" Pocket Folding Knife

- Made in Solingen / Germany -

Introduction:

The Boker Scout has been firmly connected to our name since 1985. No one can say today if anyone would have expected that the pocket knife would be one of the most successful and popular Knives from our range. But these many years in short-lived fads, that are also not unusual on the knife market, is definitely special. While no other model has had as many versions as the Scout over the years, the basic specifications never changed. The extremely stable body is from a single-piece nickel silverwhich is produced by sintering. The hollow ground blade made of stainless N690 is forged by Böhler and contributes with its memorable shape to the incomparable appearance of the Scout. A classic  Back-lock keeps the blade safely open. When the knife is opened, the spine locks into a notch on the back of the blade. To close the knife, push down the exposed part of the spine. The harmonic overall impression of this classic is completed by pleasantly shaped handle scales made of Stag.

Specifications:

Steel: N690
Blade length: 3.149“ inch / 80 mm
Total length: 7.244” inch / 184 mm
Handle length: 4.094" inch / 104 mm
Handle scales: Stag Horn

Blade Thickness: Not specified
Overall weight 160 gr.

German Böker "Scout Thuja" Pocket Folding Knife

- Made in Solingen / Germany -

Introduction:

The Boker Scout has been firmly connected to our name since 1985. No one can say today if anyone would have expected that the pocket knife would be one of the most successful and popular knives from our range. But these many years in short-lived fads, that are also not unusual on the knife market, is definitely special. While no other model has had as many versions as the Scout over the years, the basic specifications never changed. The extremely stable body is from a single piece of nickel silver which is produced by sintering. The hollow ground blade made of stainless N690 contributes with its memorable shape to the incomparable appearance of the Scout. A classic Blacklock keeps the blade safely open. When the knife is opened, the spine locks into a notch on the back of the blade. To close the knife, push down the exposed part of the spine. The harmonic overall impression of this classic is completed by pleasantly shaped handle scales made of Thuja Wood, which elaborately hand-polished to a high gloss.

Specifications:

Steel: N690
Blade length: 3.149“ inch / 80 mm
Total length: 7.244” inch / 184 mm
Handle length: 4.094" inch / 104 mm
Handle scales: Thuja Wood / Nickel Silver

Blade Thickness: Not specified
Overall weight 160 gr.

Böker Solingen "1906" Ebony Pocket Folding Knife

- Made in Solingen / Germany -

Introduction:

Some things are very much en vogue for a while before falling back into obscurity - usually well deserved. Yet others are much too beautiful, too precious to remain lost forever. The classic Boker 1906 is such a case. The design is more than a hundred years old, but its clear lines are still much loved today. Therefore, we spared no effort to bring the 1906 back to life. Neither old tools nor prototypes or design drawings existed, so we had to redesign the knife from scratch, guided by traditional methods throughout the whole production process.
The result is a charismatic pocket knife with a new lease of life, exuding fin de siècle charm – a very special piece mainly because of its clean lines and characteristic grind. Following the classic style, the plates are brass while the bolsters are nickel silver. The 440C blade is secured with a back spring. Certified imported Ebony handle scales add an elegant accent.

Specifications:

Steel: 440C
Blade length: 3.503" inch / 89 mm
Total length: 7.677” inch / 195 mm
Handle length: 4,173” inch / 106 mm
Handle scales: Ebony Wood

Blade thickness: 2.5 mm
Overall weight 79 gr.

Additional Informations about "Nickel Silver":

Nickel silver is the name of an alloy containing copper, nickel and zinc that has a silver-like look. In the knife industry, it is mainly used for fittings, especially for the so-called bolsters.

Fallkniven H1z Elmax Bushcraft Hunting Knife

- Made by Fällkniven -

Introduction:

The Fallkniven H1 knife a very handy knife of impressive strength. The H1 is our first true hunting knife and is filled with the history of classic north Scandinavian knifemaking art. Due to this heritage the H1 lacks a standard finger guard, but grip safety is enhanced through its ergonomically shaped textured handle made of thermorun plastic.. Due to the grip shape and handle design, the H1 is for experienced hunters and outdoorsman due to the handle shape. you should be an experienced hunter or outdoorsman to ensure you who can safely use this classic yet advanced hunting knife.

Sheath
The blade cover for the H1 is an injection molded zytel sheath that offers a streamlined, safe and strong combination of qualities that should satisfy all users. The sheath can be operated with one hand operated, and is very easy to keep clean.

Steel
The blade is a solid blade made of powder steel, Elmax SuperClean from Uddeholm, Sweden. This means a stronger blade that keeps its sharpness significantly longer. After testing and using this steel for a number of years we can conclude that it is a very high performing and affordable steel. It has a very good balance between sharpness and strength, but is still relatively easy to sharpen. The hardness sits around 61-62 HRC, a hardness that we found ideal for this steel in terms of sharpness and strength.

Blade function
The special design of the H1 blade is for processing game when hunting. The H1 knife may look different but it works very well. In many respects the performance of a knife depends on the person actually holding the knife. Knowing where and how to place the correct incision into game is beyond the knife. Hunters need to avoid bad cuts, keep hair off the meat, prevent sliced organs, and minimize the blood flowing on the game and the hunter. The combination of a skilled hunter and a well-designed knife is unbeatable! The incisions are well placed, the game is kept clean, and no unnecessary cuts into the meat or organs.

Blade design
The Fallkniven H1 is what an optimal hunting knife looks like. We believe that the perfect hunting blade length is around four to five inches, not the small two-inch blades that are often sold to hunters. The H1 hunting knife is close in design to a professional butcher’s knife. Proper blade length must be combined with a blade shape that provides a long, effective skinning edge, and most importantly a tip that is shaped properly for penetration performance because a hunting knife must function well along the edge and at the tip. The tip of the H1 hunting knife is designed aid in skinning by penetrating the hide without cutting into the meat.

Trendsetter
The Fallkniven H1 hunting knife will quickly become your first choice for processing game and carrying on your hunting trips. Every feature of the H1 is matched for maximum capability in many hunting situations. From the sharp, strong and tough blade steel with a 0.2″ blade thickness, to the razor-sharp convex-ground blade, to the straight and ergonomic handle in thermorun rubber, to the extremely compact size, the H1 will serve the demanding needs of the experienced hunters and true outdoorsmen.

Specifications:

Steel: ELMAX / HRC 61-62
Blade length: 3.94" inch / 100 mm
Total length: 8.27” inch / 210 mm
Handle length: 4.33 inch / 110 mm
Handle scales: Thermorun

Blade thickness: 5 mm
Knife weight 174 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Tang: Protruding Broad Tang

Handle: Lanyard Hole

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven Taiga Hunter TH2z Hunting Knife

- Made by Fällkniven -

Introduction:

The Taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. What is special about these knives is the very secure plastic sheath where a specially designed locking system ensures that the knife is properly locked when it is placed in the sheath. It works regardless of weather and wind, sand, or snow.

Specifications:

Steel: Laminated Cos HRC 60
Blade length: 3.31" inch / 84 mm
Total length: 7.40” inch / 188 mm
Handle length: 4.09” inch / 104 mm
Handle scales: Thermorun

Blade thickness: 4.5 mm
Knife weight 116 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Finger Guard: Stainless Steel

Tang: Broad Tang

Laminated CoS: A newly developed high alloy cobalt-special steel

FOX Blackbird "FX-591 OD" Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bastinelli"

Introduction:

Bastinelli

“Generally, for all my design, I always try to associate a perfect ergonomics, and a real utility in accordance with the needs of customers, civilians or professionals”.

Specifications:

Steel: stainless steel N690Co HRC 58-60
Blade length: 2.55" inch / 65 mm
Total length: 6.69” inch / 170 mm
Handle length: 4.13” inch / 105 mm
Handle scales: G10 OD green

Blade thickness: 3 mm
Overall weight 110 gr.

Additional Information:

Blade Coating: black Idroglider 
Clip: stainless steel 420J2B - reversible
Back Ring: 6082 alluminum

FOX "Blackbird FX-591" ODSW Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bastinelli"

Introduction:

Bastinelli

“Generally, for all my design, I always try to associate a perfect ergonomics, and a real utility in accordance with the needs of customers, civilians or professionals”.

Specifications:

Steel: stainless steel N690Co HRC 58-60
Blade length: 2.55" inch / 65 mm
Total length: 6.69” inch / 170 mm
Handle length: 4.13” inch / 105 mm
Handle scales: G10 OD green

Blade thickness: 3 mm
Overall weight 110 gr.

Additional Information:

Blade Coating: stone washed
Clip: stainless steel 420J2B - reversible
Back Ring: 6082 alluminum

FOX Blackbird FX-591 Folding Knife

- Made by Fox Knives in Italy -

- Design by: "Bastinelli" -

Introduction:

Bastinelli

“Generally, for all my design, I always try to associate a perfect ergonomics, and a real utility in accordance with the needs of customers, civilians or professionals”.

Specifications:

Steel: stainless steel N690Co HRC 58-60
Blade length: 2.55" inch / 65 mm
Total length: 6.69” inch / 170 mm
Handle length: 4.13” inch / 105 mm
Handle scales: G10 OD Black

Blade thickness: 3 mm
Overall weight 110 gr.

Additional Information:

Blade Coating: black Idroglider
Clip: stainless steel 420J2B - reversible
Back Ring: 6082 alluminum

FOX Blackbird FX-591 TK Folding Knife

- Made by Fox Knives in Italy -

- Design by: "Bastinelli" -

Introduction:

Bastinelli:

“Generally, for all my design, I always try to associate a perfect ergonomics, and a real utility in accordance with the needs of customers, civilians or professionals”.

Specifications:

Steel: stainless steel N690Co HRC 58-60
Blade length: 2.55" inch / 65 mm
Total length: 6.69” inch / 170 mm
Handle length: 4.13” inch / 105 mm
Handle scales: G10 blue

Blade thickness: 3 mm
Overall weight 110 gr.

Additional Information:

Training Blade

Blade Coating: stone washed
Clip: stainless steel 420J2B - reversible
Back Ring: 6082 alluminum

FOX FX-515 W Terzuola Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bob Terzuola".

Introduction:

This knife is a “Every Day Carry” designed for daily utility and self defense. It is compact and strongly made with fine materials. Easy to carry with its convenient clip.

Bob Terzuola:

"I always design my knives to be functional but graceful. Utility is always the main factor in my designs as a knife should be perfectly useful and comfortable in a variety of positions and cutting situations”.

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.54" inch / 90 mm
Total length: 7.87” inch / 200 mm
Handle length: 4.33” inch / 110 mm
Handle scales: Ziricote wood

Blade thickness: 3 mm
Overall weight 110 gr.

Additional Information:

Blade Coating: satin

Sheath: Included

FOX Radius FX-550 G10OD Pocket Folding Knife

- Winner of 2019 BLADE Show: "Imported Knife of the Year and Overall Knife of the Year".

- Made by Fox Knives in Italy -

Design by: "Denis Simonutti".

Introduction:

The Fox Radius folding knife is equipped with an innovative opening mechanism, the patented Fingers Safe Opening System. The rotating mechanism is operated by a knob located within thumb reach. The blade opens and locks by gently pressing this button and then sliding it. The blade is closed again by a backward rotation. This exceptional pocket knife was designed by Denis Simonutti, a young knifemaker from Italy. Bohler N690Co stainless is used for the blade steel, and the ultra-modern black G10 handles are ergonomically curved, for a comfortable grip. Includes removable pocket clip (tip-up), anodized to match the handle scales.

Specifications:

Steel: stainless steel N690Co HRC 58-60
Blade length: 2.95" inch / 75 mm
Total length: 7.28” inch / 185 mm
Handle length: 4,33” inch / 110 mm
Handle scales: G10 Olive

Blade thickness: 4 mm
Overall weight 105 gr.

Additional Information:

FOX Tur FX-523 OR Folding Knife

- Made by Fox Knives in Italy -

Design by: "Jesper Voxnæs".

Introduction:

Jesper Voxnæs:

“My knife designs are obviously with the Nordic lines and feel. A clean functional almost minimalistic expression. All about the function of the tool”

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 2.95" inch / 75 mm
Total length: 7.09” inch / 180 mm
Handle length: 4.13” inch / 105 mm
Handle scales: G10 orange     

Blade thickness: 3.5 mm
Overall weight 100 gr.

Additional Information:

Blade Coating: Satin

Clip: stainless steel 420J2B

Sheath: Included

FOX Tur FX-520 B - Folding Knife

- Made by Fox Knives in Italy -

Design by: "Jesper Voxnæs".

Introduction:

Jesper Voxnæs:

“My knife designs are obviously with the Nordic lines and feel. A clean functional almost minimalistic expression. All about the function of the tool”

Specifications:

Steel: Elmax stainless steel HRC 58-60 
Blade length: 2.95" inch / 75 mm
Total length: 7.09” inch / 180 mm
Handle length: 4.13” inch / 105 mm
Handle scales: Carbon fiber

Blade thickness: 3.5 mm
Overall weight 95 gr.

Additional Information:

Blade Coating: Physical Vapor Deposition (PVD)

Clip: titanium

Spacer: titanium

Sheath: Included

PVD
(Physical Vapor Deposition) is a variety of vacuum deposition methods used to deposit thin films by the condensation of a vaporized form of the desired film material onto various workpiece surface. The coating method involves purely physical process such as high temperature vacuum evaporation with subsequent condensation.

FOX Vintage Collection 639 CE Fixed Blade Knife

- Made by Fox Knives in Italy -

Design by: "Fox Knives".

Introduction:

This is a beautiful and very elegant, as well as sturdy hunting knife from the famous Italian manufacturer Fox Knives. Outstanding with this hunting knife, is the 440C full tang blade and also the extra selected stag horn scales. The high quality brown leather sheath comes with this "beauty". A true vintage collector knife that honors up to its name.

Specifications:

Steel: Stainless steel 440C HRC 57-59 
Blade length: 4.33" inch / 110 mm
Total length: 8.66” inch / 220 mm
Handle length: 4.33” inch / 110 mm
Handle scales: Stag 

Blade thickness: 3 mm
Overall weight 100 gr.

Additional Information:

Blade Coating: Satin

Blade: Full-Tang

Leather Sheath: Included

Handle: Lanyard Hole for Safety Cord