€250 to €500

Böker Solingen Applegate Fairbairn A-F Boot Knife

- Made in Solingen / Germany -

Introduction:

Among the entire variety of combat knives, completely blackened versions are basically a must-have. The black versions are very popular, not just for military operations, but also due to the special charisma of such dagger and the added corrosion protection provided by the coating. So it was basically our duty to add such a variant of the A-F 4.5 and A-F 5.5 models. Hardly any other knifemaker has influenced the field of tactical knives as much as William H. "Bill" Harsey, his designs have earned him an excellent reputation in the knife world. His modification of the legendary Boker Applegate-Fairbairn combines the knife used by many elite units with modern elements. The larger blade width and the more favorable geometry of the double edged N690 blade with black PVD coating improve the cutting properties, while the blade length offers an optimum compromise between guidance and utility value. The tang reaches out of the end of the handle and it can be used as a windowbreaker. The CNC-milled handle scales made of black Micarta are extremely durable, pleasantly structured and offer excellent grip even when wet. Delivery includes high-quality black nylon scabbard by SpecOps.

Specifications:

Steel: N690
Blade length: 4.606“ inch / 117 mm
Total length: 8.740” inch / 222 mm
Handle length: 4.133" inch / 105mm
Handle scales: Micarta

Blade Thickness: 4.9 mm
Overall weight 168 gr.

Additional informations about N690 Steel:

The cobalt-alloyed N690 by Böhler (not to be confused with the lower-grade N695!) is a very reliable upper middle-grade steel we use at our Solingen manufacture for a wide variety of projects. The fine-grained N690, which ranks above 440C, offers convincing performance data in all areas. It is often sold as N690Co – the "Co" stands for cobalt and describes the exact same steel.

German Böker Stag Full Tang Knife Savannah

- Made in Solingen / Germany -

Introduction:

The Boker Savannah Stag is a professional hunting and outdoor knife with a massive blade and elegant lines. The design by Armin Stütz, from the Austrian knife forge "Steirer Eisen", was developed in collaboration with professional rangers based on intensive experience in big game hunting in South Africa. The solid blade has an exceptional two-tone finish and is made of the cobalt-alloyed N690. This high performance steel can handle any cutting task, and the full tang design of this piece provides extraordinary strength and stability. The classic handle scales made of stag give the hand an excellent hold and provide a traditional look. For all friends of the probably most traditional of all handle materials of hunting knives stag still offers an unbroken fascination and enjoys extreme popularity. Stainless steel bolsters and a lanyard hole complete this high class knife. A reliable and powerful companion for all outdoor activities. With high quality leather sheath.

Specifications:

Steel: N690
Blade length: 4.566“ inch / 116 mm
Total length: 8.976” inch / 228 mm
Handle length: 4.409" inch / 112 mm
Handle scales: Stag Horn

Blade Thickness: 3.4 mm
Weight 184 gr.

Additional informations about "Steirer Eisen and "Armin Stütz":

The Austrian Armin Stütz began manufacturing knives in 1984 and founded the blacksmith Steirer Eisen in 1996. Since this time, knives and swords have been produced in pure manual work, initially, in particular, fixed knives, but for a number of years also increasingly folding knives for a wide range of applications. In the meantime, Steirer Eisen is Austria\'s largest blacksmith.

Fallkniven Frey NL4L Hunting Knife (New Steel Quality VG7 Wolf)

- Made by Fällkniven -

Introduction:

Frey was the god of peace in the Norse sagas, but also the god who rules over fertility and prosperity. He was king of trolls and elves, beings that until recently were an everyday part of life in the farming community. When it comes to the Northern Light Series nothing has been spared to make this knife as strong, beautiful and comfortable as possible. The knife is a pleasure to look at and a thrill to use.

Fallkniven believes the convex edge to be the ultimate combination of cutting performance and edge strength. Anyone who knows anything about knife making knows that such an edge can only be made by hand, and that’s why 99.99% of all knives don’t have that kind of edge. Each Northern Lights series knife comes with a high-quality black leather sheath.

Specifications:

Steel: VG7 Wolf HRC 59
Blade length: 5.12" inch / 130 mm
Total length: 9.61” inch / 244 mm
Handle length: 4.49” inch / 114 mm
Handle scales: Leather

Blade thickness: 5 mm
Knife weight 199 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather 

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Protruding Protruding Broad Tang

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven S1pro Survival Knife

- Made by Fällkniven -

Introduction:

S1pro – Laminated CoS steel
There are basic survival knives, and there are survival knives for the professional. Our original models of the F1, S1 and A1 have provided exceptional service for more than 20 years. And due to their outstanding quality and durability they will continue to perform for many more years. Nevertheless our drive to continually improve our knives has led us to develop the new Pro Series. The Pro Series are survival knives of near-unimaginable quality, durability and performance.

We began developing the Pro Series knives back in 2010 and finally five years later, we could offer three amazing Pro Series survival knives that are the new world standard for survival knife performance and manufacturing.

Simply put, a knife is a blade and a handle. To remain strong and stay sharp the knife must be made of high quality materials. But if the claim is made that a knife is “professional” then the knife and its builder has a responsibility to the user to raise the bar far above what is common. The Pro Series truly is professional.

Compared to their predecessors, the Pro series of F1, S1 and A1 differs in the following important areas:

1. The original laminated VG10 steel is upgraded to a laminate cobalt steel (lam. CoS) blade that ensures a durable edge and improved edge retention.
2. The blades are thicker increasing the torsional rigidity so the knives will withstand even greater external forces.
3. The full-length tapered tang is wider and thicker and therefore significantly stronger.
4. The crossguard is now made of stainless steel and permanently welded to the tang.
5. The convex blade edge has been refined to improve its cutting properties.
6. The zytel sheaths are redesigned, more durable, and better suited for the Molle attachment system.

Understandably these knives fall into a higher price category. However, considering the unparalleled quality they are by no means over priced.

A professional survival knife must perform in all weather with no exceptions. The professional survival knife must be comfortable and safe to handle for both fine and rough work in summer heat and winter cold. We at Fallkniven have considered every design aspect of these superb professional survival knifes.

Specifications:

Steel: Laminated Cobalt Steel HRC 60
Blade length: 5.12" inch / 130 mm
Total length: 9.72” inch / 247 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 6 mm
Knife weight 257 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Finger Guard: Stainless Steel

Blade: Satin Finish

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven S1pro10 Survival Knife

- Made by Fällkniven -

Introduction:

This is the standard edition of the S1pro. Only knife, Zytel sheath and our regular 10 year warranty. There are basic survival knives, and there are survival knives for the professional. Our original models of the F1, S1 and A1 have provided exceptional service for more than 20 years. And due to their outstanding quality and durability they will continue to perform for many more years. Nevertheless our drive to continually improve our knives has led us to develop the new Pro Series. The Pro Series are survival knives of near-unimaginable quality, durability and performance. We began developing the Pro Series knives back in 2010 and finally five years later, we could offer three amazing Pro Series survival knives that are the new world standard for survival knife performance and manufacturing. Simply put, a knife is a blade and a handle. To remain strong and stay sharp the knife must be made of high quality materials. But if the claim is made that a knife is “professional” then the knife and its builder has a responsibility to the user to raise the bar far above what is common. The Pro Series truly is professional.

Compared to their predecessors, the Pro series of F1, S1 and A1 differs in the following important areas:

1. The original laminated VG10 steel is upgraded to a laminate cobalt steel (lam. CoS) blade that ensures a durable edge and improved edge retention.
2. The blades are thicker increasing the torsional rigidity so the knives will withstand even greater external forces.
3. The full-length tapered tang is wider and thicker and therefore significantly stronger.
4. The crossguard is now made of stainless steel and permanently welded to the tang.
5. The convex blade edge has been refined to improve its cutting properties.
6. The zytel sheaths are redesigned, more durable, and better suited for the Molle attachment system.

Understandably these knives fall into a higher price category. However, considering the unparalleled quality they are by no means over priced. A professional survival knife must perform in all weather with no exceptions. The professional survival knife must be comfortable and safe to handle for both fine and rough work in summer heat and winter cold. At Fallkniven we have considered every design aspect of these superb professional survival knives.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 5.12" inch / 130 mm
Total length: 9.72” inch / 247 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 6 mm
Knife weight 257 gr.

Blade thickness: 6 mm
Knife weight 257 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Finger Guard: Stainless Steel

Blade: Satin Finish

Laminated CoS: A newly developed high alloy cobalt-special steel

Additional Information:

Edge: Convex

Sheath Included: Zytel

Finger Guard: Stainless Steel

Tang: Full Tang

Laminated CoS: A newly developed high alloy cobalt-special steel

FOX Fairbairn Sykes FX-592 WAF Dagger

- Made by Fox Knives in Italy -

Design by: "Hill Knives".

Introduction:

Hill Knives:

“Dutch Commando Dagger is Based on the original Fairbairn Sykes design. It is a collector’s knife to honor the special forces of the world.”

The Dutch Knifemaking company Hill Knives was founded in 1979 by Frans van den Heuvel † (father) and Albert van den Heuvel (son), who both have a technical background as toolmakers. “What makes Hill Knives extraordinary is our passion and drive to create the ultimate quality and design when it comes to our knives".

- Please select your desired version in the selection menu above -

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 6.69" inch / 170 mm
Total length: 11.81” inch / 300 mm
Handle length: 5.12” inch / 130 mm
Handle: Anodized T6-6082 black anodized or Walnut wood

Blade thickness: 5 mm
Overall weight 205 gr.

Additional Information:

Blade Coating: Physical Vapor Deposition (PVD)

Leather Sheath: Included

PVD
(Physical Vapor Deposition) is a variety of vacuum deposition methods used to deposit thin films by the condensation of a vaporized form of the desired film material onto various workpiece surface. The coating method involves purely physical process such as high temperature vacuum evaporation with subsequent condensation.

Muela Setter-11.TH Collectors Hunting Knife