€250 to €500

German Böker "M4 Sherman Damascus" Folding  Knife

- Made in Solingen / Germany -

Introduction:

The extraordinary Boker M4 Sherman-Damascusis a piece of living history and combines high-quality craftsmanship with historical materials. The American M4 Sherman was already designed in 1940 and is still considered one of the most famous tanks in history. It was produced between 1942 and 1945, was in service until 1957 and was used on all battlefields of the Second World War - not only by the United States and Canada, but also by Great Britain, the Free French Forces, China and even the Soviet Union.

Originally developed to replace the M3 Grant/Lee medium tank, the Sherman tank's main mission was to support the infantry, lead attacks and reinforce defensive positions. The Sherman was built close to 50,000 times and was the most widely used tank of the Allies during World War II. It was produced in countless mission-specific variations and was used well into the Cold War.

Together with the Americans in the Wartime Museum in Virginia, we have managed to preserve an important piece of lost history. The Boker Sherman-Damascus is equipped with a unique Damascus blade with 80 layers, forged from different materials from the production of M4 Sherman tanks, which were previously restored by the museum. The unique Damascus is forged by hand for us by Chad Nichols in the Customized Ladder pattern and is reminiscent of the tank tracks left in the ground by the heavy chains of the M4 Sherman. The ball bearing blade is opened by thumb stud and locked by a solid steel frame lock, a Hinderer Lock-Stop acts as overstretch protection for the lock.

The overall shape of the knife is a tribute to the aesthetic lines of the armour, while the decorative pivot screw is modelled on the characteristic main drive sprocket. The slightly contoured burlap Micarta handle fits comfortably in the hand and the colour is reminiscent of the camouflage paint used by both the U.S. Army and the Marine Corps. With lanyard hole and practical deep carry clip (tip-up/r). Handmade in the Boker knife manufactory in Solingen. Delivery with noble floating display, certificate of authenticity and individual serial number.

A portion of the proceeds from each knife sold goes to the Americans in the Wartime Museum to support educational programmess and the care and preservation of these proud examples of American history. The Americans in the Wartime Museum is a non-profit cultural and educational institution dedicated to honouring those who served in all branches of the U.S. military and on the home front from World War I to the present. The museum serves to educate the public, especially young people, by telling individual stories of personal experiences, war realities and sacrifices made by Americans in the struggle to preserve freedom and liberties. The museum inspires visitors by allowing them to experience military vehicles, explore artifacts, and participate in reenactments and special programmes in a dynamic, interactive environment.

Specifications:

Steel: Damascus
Blade length: 3.031“ inch / 77 mm 
Total length: 6.889” inch / 175 mm 
Handle length: 3.858" inch / 98 mm
Handle scales: Micarta

Blade Thickness: 3,6 mm
Overall weight 107 gr.

German Böker "Sherman EDC" Folding  Knife

- Made in Solingen / Germany -

Introduction:

The great success of the Boker M4 Sherman Damascus, which is due not only to the history of the historic Damascus steel but also to the design of the modern folder, has prompted us to use this as the basis for a leading and pleasing EDC with a Titanium framelock, which, despite the powder metallurgy of the blade, also carries a genuine piece of M4 Sherman Damascus.

For the blade of the Sherman EDC we have used Magnacut for the first time, which is not without reason being celebrated as a "miracle steel". Unlike the tool steels usually used, this steel was developed specifically for knife making. The three desirable properties of a steel - edge retention, toughness and rust resistance (stainless in the DIN category) - represent a conflict of goals. To make the steel rust-resistant, the addition of chromium is necessary, which makes the structure coarse, brittle and susceptible to fracture under normal conditions. High hardness, which has a positive influence on cutting durability, is usually achieved at the expense of toughness. With Magnacut, despite the high Chromium content of 10.7% and an impressive hardenability of over 62-63 HRC, it has been possible to achieve a very fine microstructure and thus high toughness and shock-load tolerance. The addition of nitrogen plays a central role here. Nitrogen is actually a steel pest in the alloy. However, due to sophisticated heat treatment, among other things, the nitrogen of the Magnacut is integrated into the crystalline lattice structure of the steel structure and thus achieves the otherwise contradictory material properties.

The central structural difference to the M4 Damascus model is the flipper, elegantly integrated into the contours, which allows the blade to slide open smoothly with a small impulse and invites you to play. The ball-bearing blade is opened alternatively by thumb stud and locked by a sturdy Titanium Framelock with stonewash finish. An overdrive stop acts as an over-extension protection for the lock. The milled titanium clip (tip-up/r) with a steel ball as well as the handle scales made of wild Carbon Fibre complete the harmonious overall picture.

A special highlight of the Boker Sherman EDC is the protruding backspacer made of Damascus, which is equipped with a lanyard hole in elongated slotted design. The Damascus of the backspacer was forged from various materials from the production of M4 Sherman tanks by Chad Nichols in the Customized Ladder pattern and is reminiscent of the tank tracks left in the ground by the heavy chains of the M4 Sherman.

Specifications:

Steel: MAGNACUT
Blade length: 2.952“ inch / 75 mm 
Total length: 7.007” inch / 178 mm 
Handle length: 4.055" inch / 103 mm
Handle scales: Carbon / Steel

Blade Thickness: 3,6 mm
Overall weight 95 gr.

Fallkniven Tre Kronor TK6L Hunting Knife

- Made by Fällkniven -

Introduction:

Tre Kronor, the Swedish knife series, offers a highly advanced technological solution combined with timeless Swedish design. These knives are in the Swedish minimalist idiom, where form harmonises with function. The result is an edged implement that the user will find an easy and accommodating knife — a world-beater from Sweden. If there is a quality that hunters appreciate very much, I would suggest the edge retention! This blade is made of stainless laminate powdersteel which is combining both strength and edge retention. Most truly, you have never before handled a knife which holds up an edge better than this model. When the sharpess finally is gone, you restore the edge by using a fine, flat diamond whetstone. You maintain your good knife by keeping it clean and dry and, should it get dirty, use some warm water and washing-up liquid, wipe off and let dry.

Specifications:

Steel: 3G HRC 62
Blade length: 3.15" inch / 80 mm
Total length: 6.89” inch / 175 mm
Handle length: 3.74” inch / 95 mm
Handle scales: Thermorun

Blade thickness: 4,5 mm
Knife weight 119 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather 

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Protruding Broad Tang

FOX Elite Damascus 273 DOL Folding Knife

- Made by Fox Knives in Italy -

Design by: "Fox Knives".

Introduction:

The elegant Elite Damascus 273 pocket knife from Fox-Knives impresses not only with its high quality, but also with the balanced price-performance ratio.

Specifications:

Steel: Damasteel® RWL34 + PMC27 Super Dense Twist™ HRC 58-60 
Blade length: 3.15" inch / 80 mm
Total length: 7.48” inch / 190 mm
Handle length: 4.33” inch / 110 mm
Handle scales: Olive Wood 

Blade thickness: 3 mm
Overall weight 95 gr.

Additional Information:

Box: Included

Blade: Damascus

Bolsters: Stainless steel AISI 304

FOX Karambit FX-599Ti or FX-599TiCS

- Made by Fox Knives in Italy -

Design by: "Fox Knives":

- Please select your desired version from the drop-down menu above -

Fox Knives Military Division:

Fox Knives Military Division (FKMD) is a special brand of Fox Knives, which was established in 2005. Their range of goods focuses on operation purposes, which matches the special requests of police, military and rescue units. Since the establishment, FKMD is a supplier of NATO and cooperates closely with elite units around the world.

Introduction:

This beautiful knife impresses with its elegance and stability.

Specifications:

Steel: Elmax stainless steel HRC 58-60 
Blade length: 2.55" inch / 65 mm
Total length: 6.69” inch / 175 mm
Handle length: 4.33” inch / 110 mm
Handle scales: Carbon fiber with a titanium frame

Blade thickness: 3 mm
Overall weight 80 gr.

Additional Information:

Blade Coating: Bead blasted or Cerakote™ black

Clip: titanium - reversible

Back Ring: titanium

Sheath: included

Cerakote™
It Is a ceramic based finish that can be applied to metals, enhances a number of physical performance properties including abrasion/wear resistance, corrosion resistance, chemical resistance, impact strength, and hardness.

FOX Radius FX-550 Ti Sandblasted Titanium Pocket Folding Knife

- Winner of 2019 BLADE Show: "Imported Knife of the Year and Overall Knife of the Year".

- Made by Fox Knives in Italy -

Design by: "Denis Simonutti".

Introduction:

The Fox Knife Radius FX-550 Ti is an impressive and remarkable pocket knife. At the 2019 Blade Show in Atlanta, Georgia USA this knife won awards for the best imported knife and Overall Knife of the Year. The Fox Knife Radius is a revolutionary pocket knife. The thumb stud is added to the handle and also functions as a lock. It’s really unique! By pushing the thumb stud you can unlock the knife to make sure you can close it. No one has ever done that.

The blade is made from high-tech Böhler M390 steel. One of the most popular types of steel on the market. It retains its sharpness for a really long time. As such you hardly have to sharpen the knife. So a really cool blade. But what about the handle? It is made from titanium. And the milling work was nicely carried out Subtle grip on specific parts, silver accents simply stunning.

Specifications:

Steel: stainless steel M390 HRC 59-61
Blade length: 2.95" inch / 75 mm
Total length: 7.28” inch / 185 mm
Handle length: 4,33” inch / 110 mm
Handle scales: Sandblasted Titanium

Blade thickness: 4 mm
Overall weight 140 gr.

Additional Information:

FOX Radius FX-550 TiB Pocket Folding Knife

- Winner of 2019 BLADE Show: "Imported Knife of the Year and Overall Knife of the Year".

- Made by Fox Knives in Italy -

Design by: "Denis Simonutti".

Introduction:

The Fox Knives Radius FX-550 TiB is an impressive and remarkable pocket knife. At the 2019 Blade Show in Atlanta, Georgia USA this knife won awards for the best imported knife and Overall Knife of the Year. The Fox Knives Radius is a revolutionary pocket knife. The thumb stud is added to the handle and also functions as a lock. It’s really unique! By pushing the thumb stud you can unlock the knife to make sure you can close it. No one has ever done that.

The blade is made from high-tech Böhler M390 steel. One of the most popular types of steel on the market. It retains its sharpness for a really long time. As such you hardly have to sharpen the knife. So a really cool blade. But what about the handle? It is made from titanium. And the milling work was nicely carried out Subtle grip on specific parts, silver accents simply stunning.

Specifications:

Steel: stainless steel M390 HRC 59-61
Blade length: 2.95" inch / 75 mm
Total length: 7.28” inch / 185 mm
Handle length: 4,33” inch / 110 mm
Handle scales: Titanium Black PVD

Blade thickness: 4 mm
Overall weight 140 gr.

Additional Information: