€250 to €500

German Böker 1969 Mach-1 Damascus knife

- Made in Solingen / Germany -

Introduction:

Unrestrained, with inherent power. Spirited, with a gentle disposition. The vastness in view, everyday life out of sight. The highway seemingly endless, with rough asphalt, crumbling yellow markings, and blowing desert dust. Before long, the endlessness gives way to a feeling of freedom, the sunset bathing the landscape and your spirit in a warming blanket of bliss and gentle wind. The deep sound of the powerful Windsor V8 Small Block engine with 186 kW (253 hp) has a calming effect, making the road trip in the Ford Mustang a very special moment. 

Inspired by the World War II fighter plane, the P-51 Mustang, Ford developed the Mustang in the early 1960s, which was launched in 1964. As a compact sports coupé, the affordable pony car, whose name derives from the galloping horse in the Ford Mustang's radiator grille logo, appealed primarily to a younger clientele. To counter the high-powered competition from Dodge, Pontiac, and Chevrolet, Ford made a statement in the league of powerful muscle cars with the Mustang Mach-1. The first-generation Mach-1 from 1969 was available exclusively as a fastback variant and differed from the production model in both appearance and performance: A sports suspension, matte black sports stripes, and a hood with cooling air intake, chrome exhaust tips and fuel cap, hood pins, front and rear spoilers, and a luxurious interior gave more than 72,000 units of this model a real boost in sales.

Over the years, the Mustang has become the epitome of the muscle car and is now continuing its legacy in its 7th generation. Boker references the vehicle's unmistakable design and makes the legend even more tangible in the 1969 Mach-1 Damascus knife of the same name. Parts from the wheel hub, wishbone, and suspension were used for the elegant 84-layer Damascus blade, which was hand-forged by Chad Nichols in a wave pool pattern inspired by the tire marks burned into the asphalt after a circular donut drift. The ball-bearing blade with its distinctive false edge opens smoothly via the removable thumb pin and cuts with rich torque. To prevent the passionate knife from getting out of hand, the liner lock locks the blade with the familiar coolness of a Ford Mustang. Finger recesses in the handle made of lightweight, high-strength aluminum are reminiscent of the fenders of the muscle car, while the gold-colored inlay of the front handle shell ties in with the side trim of the door and body. 

The expressive Silver Jade color scheme of the handle emphasizes the sporty look of the pocket knife and creates a noticeable V8 vibration in the hand. The sloping back of the handle is nostalgically inspired by the fastback contour of the car body, while the detailed blade screw makes the forward thrust of the wheels palpable. Straight and angular, the stainless steel clip, milled from solid metal, is reminiscent of the door handles on the Ford Mustang. Delivery includes a high-quality floating display, impatient hoof scraping, and the necessary dose of nonchalance. Handcrafted at the Boker factory in Solingen.

Specifications:

Steel: Damascus
Blade length: 3.228“ inch / 82 mm 
Total length: 7.795” inch / 198 mm
Handle length: 4.566” inch / 116 mm
Handle scales: Aluminum

Designer: Tommaso Rumici

Blade thickness: 3.63 mm
Overall weight 116 gr.

German Böker 1969 Z28 Shadow Damascus Knife

- Made in Solingen / Germany -

Introduction:

Boker 1969 Z28-Damast Shadow - Legends are not born—they are forged over time, waiting for the moment they shape history. They do not inherit a myth; they create one, leaving behind a legacy that endures.

In 1966, in Detroit, Michigan, at the heart of the American automotive industry, the foundation for another icon was laid. Among countless vehicles produced during this era, only a few achieved legendary status. The Chevrolet Camaro, originally conceived as a “pony car” for a younger generation, embodied compact dimensions, sporty performance, and attainable power—becoming a symbol of rebellion and freedom. Its success was immediate. Between 1966 and 1969, approximately 700,000 Camaros were produced, offered with twelve different engine variants. In 1969, the Z28, the final Camaro of the first generation, made its debut. Among enthusiasts, it is regarded as one of the finest Camaros ever built. Powered by a robust V8 small-block engine producing 216 kW (294 hp) and equipped with the Special Performance package, the Z28 secured its place among the elite muscle cars, complete with iconic racing stripes. Its motorsport DNA is unmistakable—the engine is a detuned derivative of the highly successful Penske Camaro from the SCCA Trans-Am racing series.

Inspired by this automotive legend, Boker brings the spirit of the Camaro Z28 back to life. What emerged is more than a knife—it is a lifestyle. The sound of a rumbling V8 on an endless highway, sunlight gliding across canyon walls, warming both road and soul. Moments of pure freedom, far removed from the everyday. This same emotion defines the Boker 1969 Z28-Damast Shadow, strictly limited to 300 pieces worldwide.

Created in collaboration with Italian designer Tommaso Rumici, this distinctive “Muscle Knife” captures the Z28’s power, character, and unmistakable design language. The ball-bearing drop-point blade is crafted from 80-layer Damascus steel with an elegant PVD finish, hand-forged by Chad Nichols in the “Tread” pattern—an homage to the Camaro’s sloped cowl-induction hood. Authentic components from the Camaro’s upper control arm are integrated into the blade material itself.

Smooth deployment is achieved via the thumb stud, while an aggressive stainless steel liner lock ensures reliable blade security. The black hard-anodized aluminum handle translates the vehicle’s body lines into a progressive, sculpted design. Distinctive elements such as the notchback profile, subtle rear spoiler, and gill-like rear fender vents are seamlessly incorporated. The pivot screw echoes classic muscle car wheels, while the straight, milled stainless steel pocket clip recalls polished chrome door handles.

Handcrafted in the Boker Solingen manufactory, the knife is presented in a premium display case, capturing the power, sound, and exhilaration of a V8-driven journey.

Product Highlights:

80-layer Damascus steel with PVD finish, hand-forged by Chad Nichols in the “Tread” pattern, inspired by the Camaro Z28 cowl-induction hood. Components from Camaro’s control arm used in the blade. Black aluminum handle reflecting the Camaro’s body lines. Design details like notchback, rear spoiler, and vents integrated into the handle. Pivot screw inspired by muscle car wheels. Stainless steel clip inspired by chrome door handles. Aggressive stainless steel liner lock for reliable blade retention. Thumb stud for smooth and elegant blade opening. Limited to 300 pieces worldwide. Includes premium floating display for stylish presentation. Handcrafted in the Boker Solingen manufactory.

Steel: Damascus
Blade length: 3.149“ inch / 80 mm 
Total length: 7.322” inch / 186 mm
Handle length: 4.173” inch / 106 mm
Handle scales: Aluminum

Designer: Tommaso Rumici

Blade thickness: 3.6 mm
Overall weight 98 gr.

Boker Barlow Tirpitz Prime Damascus Folding Knife

- Made in Solingen / Germany -

PRE-Order available:

*This superb knife is again available at August 30th 2026*

Introduction:

The huge interest in our exceptional Boker Tirpitz-Damast over the years has convinced us to design another model supplied with the historic damascus steel. The Boker Barlow Prime Tirpitz Damascus, which is much more compact than the original model, is not only convincing in the collector's showcase, but also as a gentleman's knife suitable for a pocket. The blade is made of the unique Tirpitz Damascus, is supplied with a modern, elongated ricasso and opens with a nail nick. The sister ship of the legendary Bismarck was the largest battleship ever launched for the German Navy.

Immediately after the end of the Second World War, a Norwegian specialist company began to cannibalise the ship, which had sunk off the Norwegian coast, in order to make the high-alloy steel available for civilian purposes. Norwegian divers recovered parts of the Tirpitz's special armour from the fjord for Boker. From these pieces of living history, the Boker damascus smith exclusively forges an extraordinary damascus supplied with fascinating history. The Great Pyramid pattern in 200 layers distinguishes the hand-forged Damascus blade and makes the knife a highlight of any knife collection. However, the combination of Tirpitz steel with carbon tool steels also results in an extremely durable Damascus that, with a Rockwell hardness of 61 to 63 HRC, is up to any task in everyday use.

The operating safety of the history-steeped slipjoint pocket knife is further enhanced by a 90-degree locking mechanism when opening and closing. The characteristic drop shape of the Barlow can be traced back to the English pocket knives of the 17th century, which certainly makes it one of the oldest models ever. The name of the classic probably goes back to an enterprising Sheffield knife manufacturer of the same name, who began exporting the robust knives to North America around 1800. There they immediately enjoyed great popularity and so the first Barlow models also appeared in the history of the Boker Manuactory in Solingen at the end of the 19th century.

This integral version of the timeless classic with a contoured handle body made of black micarta, which is milled from the solid and also forms the characteristic bolsters of the Barlow. The lightweight construction can thus completely dispense with additional liners made of metal. Thanks to the likewise contoured handle scales made of domestic walnut wood, the unique gentleman's knife lies extremely comfortably in the hand. The decorative rivets are made of nickel silver, the pivot screw of stainless steel. Supplied with a high-quality felt case for storage. Handmade in the Boker Knife Manufactory in Solingen.

Specifications:

Steel: Damascus 
Blade length: 2.716“ inch / 69 mm 
Total length: 6.023” inch / 153 mm
Handle length: 3.307” inch / 84 mm
Handle scales: Walnut wood / Micarta

Blade thickness: 2 mm
Overall weight 32 gr.

Böker Solingen "Boxer" Damascus Folding Collectors Knife

- Made in Solingen / Germany -

Introduction:

The Boker Boxer, designed by Raphaël Durand from Thiers, is a classic two-handed knife that is extremely popular. In this particularly noble version, the traditional pocket knife is equipped with a dark blade of Dragonskin Damascus by Bertie Rietveld, which is hardened to 58 HRC. The South African custom knifemaker is considered the country's first Damascus smith and has been forging high-performance Damascus with unusual patterns since 1991. The blade is locked by a sturdy backlock and has a generous ricasso. The decorative stainless steel bolsters bear the groove typical of Raphaël Durand. The handle scales are made of polished red burlap Micarta and are very comfortable to hold. The handy size is the perfect compromise between pocket suitability and versatility in use. With reinforced Lanyard-Hole. Handmade in the Boker knife manufactory Solingen. Delivery with individual serial number in a noble floating display with certificate of authenticity.

Specifications:

Steel: Damascus
Blade length: 2.952“ inch / 75 mm
Total length: 7.204” inch / 183 mm
Handle length: 4.251” inch / 108 mm
Handle scales: Brwon Micarta / Stainless Steel

Blade thickness: 3 mm
Overall weight 121 gr.

Böker Solingen "Boxer" Desert Ironwood Folding Knife

- Made in Solingen / Germany -

Introduction:

Raphaël Durand of Thiers is one of the most sought-after custom knifemakers in France. His handmade pieces fetch premium prices all over the world and his order book is always full. All the more reason for us to be happy to follow the Slack by Boker Plus with one of his most popular models, the Boxer, now available from our Solingen Manufactory. The classic backlock combines Mediterranean influences of the blade shape with elements of a traditional pocketknife - an intriguing combination with a unique flair. The blade consists of N690 with a fine satin finish. The stainless steel bolsters sport Raphaël Durand's signature groove. The scales consist of exquisite and durable certified imported Desert ironwood. The handy size is the perfect compromise between pocket dimensions and versatile functionality, which makes the Boxer a true all-rounder and a sure favorite of fans of unique pocket knives.

Specifications:

Steel: N690
Blade length: 2.952“ inch / 75 mm
Total length: 7.204” inch / 183 mm
Handle length: 4.251” inch / 108 mm
Handle scales: Desert Ironwood

Blade thickness: 2.9 mm
Overall weight 122 gr.

Additional steel informations:

The cobalt-alloyed N690 by Böhler (not to be confused with the lower-grade N695!) is a very reliable upper middle-grade steel we use at our Solingen manufacture for a wide variety of projects. The fine-grained N690, which ranks above 440C, offers convincing performance data in all areas. It is often sold as N690Co – the "Co" stands for cobalt and describes the exact same steel.

German Böker Camaro 1969 Z28 Damascus knife

- Made in Solingen / Germany -

Introduction:

Legends are not born; they are shaped by time until their moment to shape time has come. They don't live a myth, they create it and leave behind a venerable legacy. In 1966, the foundation stone for another icon was laid in Detroit, Michigan. In the epicentre of the US automotive industry, numerous vehicles see the light of day. Many of them are ordinary cars, while others are exclusively chosen. The Chevrolet Camaro was originally designed as a so-called Pony Car, which was intended to appeal primarily to younger buyer groups. Compact, sporty and affordable - the coupé was the stalwart for the semi-strong. Success was not long in coming. From 1966 to 1969, approximately 700,000 Camaro models with 12 different engine variants rolled off the production line. In 1969, the last Camaro of the first generation, the Z28, was introduced. Connoisseurs consider this model to be one of the best of all series. A massive V8 small block engine with 216 kW (290 hp) and a Special Performance Package propelled the Camaro Z28 into the select league of muscle cars, sporty stripes on the body included. The motorsport DNA of the now coveted collector's item cannot be denied either. The engine used is a toned-down version of the successful and highly decorated Penske Camaro from the SCAA Trans AM racing series.

Boker quotes the design of the Camaro Z28 and revives the legend. The result is more than just a knife. An attitude to life, the dignified road trip with the bubbling sound of the V8 engine on the seemingly endless highway, gentle rays of sunlight streaking across the canyon and warming the soul. Unforgettable moments without everyday life - just like the extraordinary Boker 1969 Z28- Damascus. In collaboration with the Italian designer Tommaso Rumici, a unique "muscle knife" was created that combines the distinctive character traits of the Camaro Z28 in form and strength. The elegant Damascus drop-point blade, hand-forged by Chad Nichols with 80 layers in the “Tread” pattern, reminisces of the sloping cowl induction bonnet of the muscle car. For this purpose, parts of the upper A-arm from the Camaro were used for the blade, that opens smoothly with the blue thumb stud, while the biting stainless steel linerlock reliably locks the knife in place. Based on a colour analysis of an original model, the finely tuned lacquer finish in "Le Mans Blue" was created especially for Boker for the aluminium handle, which interprets the lines of the body in a nostalgic way and comes up with exciting details. The notchback, the small rear spoiler and the gill-like air intakes on the rear wings have been beautifully integrated into the knife. The blade axle screw is lovingly inspired by the rims often used on muscle cars, whereas the straight-lined stainless steel clip, milled from the solid, is reminiscent of the chrome-plated door handles. Delivery includes a high-quality floating display, plenty of torque and a gentle breeze in your hair. Handmade in the Boker Manufactory in Solingen.

Specifications:

Steel: Damascus
Blade length: 3.149“ inch / 80 mm 
Total length: 7.322” inch / 186 mm
Handle length: 4.173” inch / 106 mm
Handle scales: Aluminum

Designer: Tommaso Rumici

Blade thickness: 3.63 mm
Overall weight 99 gr.

Böker Solingen Classic Western Bowie N690 Knife

- Made in Solingen / Germany -

Introduction:

The design of the traditional Boker Bowie was based on original drafts from the early 19th century and equipped with an extremely stable, 6.4 mm thick blade made from N690. The name of the knife goes back to James "Jim" Bowie, the famous pioneer and soldier who is revered as a hero of the Wild West. Contrary to the widely copied Sheffield Bowie, the variations of this outdoor knife resemble the early American Bowie with its s-shaped stainless steel crossguard sporting a finely satinized surface. The exquisite scales of domestic oak lend the Boker Bowie even more authenticity. Comes with a high-quality Western leather sheath in black, design based on the original.

Specifications:

Steel: N690
Blade length: 7.795“ inch / 198 mm
Total length: 12.795” inch / 325 mm
Handle length: 5" inch / 127 mm
Handle scales: Oak Wood

Blade Thickness: 6.4 mm
Overall weight 495 gr.

N690:

The cobalt-alloyed N690 by Böhler (not to be confused with the lower-grade N695!) is a very reliable upper middle-grade steel we use at our Solingen manufacture for a wide variety of projects.

Böker Solingen Classic Western Stag Bowie N690 Knife

- Made in Solingen / Germany -

*Pre-order available: Delivery available from July 20th 2026*

Introduction:

The design of the traditional Boker Bowie was based on original drafts from the early 19th century and equipped with an extremely sturdy blade made from N690 and exclusive handle scales made from carefully selected stag. Due to the considerable size and thickness of the handle scales, it was difficult and expensive to find the right supplier for premium-grade stag. At last, the search was successful, and we are happy to offer our many Bowie knife fans a high-end classic version. Handcrafted by Boker Manufactory Solingen. Comes with a high-quality western leather sheath and a new version of the historic Boker tree symbol.

Specifications:

Steel: N690
Blade length: 7.795“ inch / 198 mm
Total length: 12.795” inch / 325 mm
Handle length: 5" inch / 127 mm
Handle scales: Stag

Blade Thickness: 6.4 mm
Overall weight 537 gr.

N690:

The cobalt-alloyed N690 by Böhler (not to be confused with the lower-grade N695!) is a very reliable upper middle-grade steel we use at our Solingen manufacture for a wide variety of projects.

German Böker "Försternicker" Hunting Stag Knife

- Made in Solingen / Germany

Introduction:

With the Boker Försternicker, we are calling on traditional values, since this vintage version of the Nicker used to be a popular part of our program several decades ago. The slightly wider, curved blade is typical for this design, offering a somewhat larger task profile than the classic pointed hunting knife. The curved spine with subtle thumb grooves add to the comfortable grip and highlight the exclusive design.
The Försternicker is ideal for all outdoor tasks on the hunt, since the sturdy blade with its high flat grind combines stability with excellent cutting properties. The use of modern Böhler N690 for the blade highlights the exceptional practical value thanks to the superior edge retention compared to classic nicker steel. It is also easy to sharpen.
The nickel silver bolster and butt give the Försternicker an excellent grip. The knife is easy to carry in the classic nicker sheath. With scales made from carefully selected stag.

Specifications:

Steel: N690
Blade length: 4.330“ inch / 110 mm
Total length: 8.858” inch / 225 mm
Handle length: 4.527" inch / 115 mm
Handle scales: Stag Horn

Blade Thickness: 4.3 mm
Weight 205 gr.

Additional information about what "Flat Grind" means:

German Böker Hunting Stag Knife "Integral II."

- Made in Solingen / Germany -

Introduction:

The Boker Integral II. is the compact version of the Vollintegral, just as sturdy and die-forged from a single piece of steel. The rugged blade and excellent ergonomics of the handle scales make the knife perfect for hunting tasks and more. The conical tang and hand-ground finger choils highlight the sophisticated craftsmanship and offer a much more comfortable grip. The scales consist of certified imported rosewood, precision-milled to minimize production tolerances. The blade is made from the reliable outdoor material 440C and equipped with a flat grind that offers great stability even for heavy-duty tasks. Comes with a high-quality leather sheath.

Specifications:

Steel: 440C stainless steel
Blade length: 3.937“ inch / 100 mm
Total length: 8.661” inch / 220 mm
Handle length: 4.724” inch / 120 mm
Handle scales: Stag Horn

Blade Thickness: 3,96 mm
Overall weight 208 gr.

Sheath: Leather

Boker Kalashnikov Bayonet Damascus Folding Knife

- Made in Solingen / Germany -

Introduction:

In 1947, Mikhail Kalashnikov presented the AK-47 assault rifle he had designed to the Red Army and immediately convinced the decision-making bodies of its development. Only two years later, the now world-famous AK-47 was officially put into service as the "7.62 mm Awtomat Kalasshnikova obraztsa 1947". Even then, the simple and reliable design as a gas pressure loader with a rotary head breech, the consistent use of sheet metal stampings that could be produced quickly and inexpensively, and the adherence to a cartridge class introduced by the Wehrmacht with the StG 44 with an average performance between submachine gun and rifle ammunition were trend-setting to this day. These features resulted in the Kalashnikov system being the most widely built and replicated handgun in history, with an estimated 100 million made worldwide today.

Introduced in 1959 along with the AKM, the revised variant of the AK-47, the bayonet was no less revolutionary and formative for later designs than the famous assault rifle itself. The concept was based on a knife originally developed by R. Todorov for combat swimmers. It marked a move away from long bayonets, which were used purely as stabbing weapons, to a short, mountable utility knife with insulated wire shears and a multifunctional back saw.

Mikhail Kalashnikov personally visited the Boker Manufactory in Solingen in 2002 and officially introduced the Boker Kalashnikov line of knives to the public. More than 70 years after the AK-47 entered service, we now present a truly exceptional special edition model of the knife line and once again honour his brilliant engineering achievement. The Boker Kalashnikov Bayonet Damscus is equipped with a unique Damascus blade made from the steel of the 6Ch3 and 6Ch4 bayonets according to the GRAU index of the former Soviet Army and decorated with the signature of General Kalashnikov. The stainless Damascus by Chad Nichols consists of 80 layers and is forged by hand in the Virus pattern. It features an unusually intricate pattern that is the result of a very controlled forging process. The blade with the pandur tip adopted from the bayonets is opened with the help of the thumb stud and locked by a sturdy linerlock.

The handle is CNC machined from a block of 6061-T6 Aluminum and then hardcoat anodized black. The stabilized inlays are made of domestic hornbeam wood, reminiscent of the stock wood of the famous assault rifle, and together form the shape of the forend's distinctive vents. The Russian Amber Shellac colour of the original stocks has been precisely matched. They are also CNC milled from the solid and inserted by hand. All screws and the clip (tip-up/r) are also black anodized. Handmade in the Boker Knife Manufactory in Solingen. Delivery with noble floating display, certificate of authenticity and individual serial number.

Specifications:

Steel: Damascus stainless steel
Blade length: 3.779“ inch / 96 mm 
Total length: 8.976” inch / 228 mm
Handle length: 5.196” inch / 132 mm
Handle scales: Aluminum / Iron Wood

Blade thickness: 4 mm
Overall weight 158 gr.

German Böker Stag Pocket Knife "Mono CPM"

Made in Solingen / Germany -

Introduction:

As familiar as it used to be, the single-blade Boker hunting pocket knife had been missing from our product range for a long time. However, we listened to the many inquiries we received regarding a new version - and so, this particularly sturdy knife is once again complementing our Trio and Quadro series. Focusing on the most important feature, which is the potent 3.5 mm blade, the Mono is the perfect knife for the huntsman who doesn't care for additional tools. The blade is secured via the usual back lock. The nickel silver bolsters and stag scales pay homage to tradition. The blade is made from powder metallurgical CPM CruWear with great edge retention. With its outstanding performance profile and a Rockwell hardness of 62-63 HRC, this steel has already set the standard for the Trio CPM and Quadro CPM.

Specifications:

Steel: CPM-CruWear
Blade length: 3.503“ inch / 89 mm
Total length: 7.677” inch / 195 mm
Handle length: 4.173” inch / 106 mm
Handle scales: Stag Horn

Blade thickness: 3.5 mm
Overall weight 130 gr.

Additional informations about "edge retention":

Edge retention describes the resistance of the edge of a blade against being dulled by chemical, mechanical and thermal influences. It expresses how long the blade remains sharp under certain circumstances and over a certain period of time. This property is determined by the blade material, the production process employed to make the blade, and its edge geometry. Another major factor is the behavior of the user, which has a significant influence on a blade\'s edge retention. If the knife is used incorrectly or not for its intended purpose, the edge will wear out quickly and might even be destroyed.

German Böker Stag Pocket Knife "Quadro CPM"

- Made in Solingen / Germany -

Introduction:

The Boker Hunters Knife Quadro continues to delight the traditionally oriented hunters. The classic scales made of stag give the Pocket knife an extraordinary charm. A special feature of knife scales made of stag  is their individual shape. While wood handles differ mainly in their grain and color, scales made of stag are also characterized by their very specific surface structure, which makes each item a unique piece of art.

The demand for premium steels with extreme edge-holding is also immense for hunting applications, with a traditional knife design generally given preference in this case. Starting immediately, our extensively field-tested Trio hunting classic is optionally also available with a powdered-metal primary blade made from CPM-CruWear with a Rockwell Hardness of 62-63 HRC. This extraordinarily wear-resistant blade steel gives woodsmen significantly longer use between resharpenings compared to traditional 440C. The original design of the Quadro CPM was otherwise left intact, giving traditionally oriented hunters continued enjoyment. It also features a gutting blade, a saw and corkscrew.

Specifications:

Steel: CPM-CruWear
Blade length: 3.346“ inch / 85 mm
Total length: 7.677” inch / 195 mm
Handle length: 4.330” inch / 110 mm
Handle scales: Stag Horn

Blade thickness: 3.5 mm
Overall weight 196 gr.