€250 to €500

German Böker "Scout Stag" Pocket Folding Knife

- Made in Solingen / Germany -

Introduction:

The Boker Scout has been firmly connected to our name since 1985. No one can say today if anyone would have expected that the pocket knife would be one of the most successful and popular Knives from our range. But these many years in short-lived fads, that are also not unusual on the knife market, is definitely special. While no other model has had as many versions as the Scout over the years, the basic specifications never changed. The extremely stable body is from a single-piece nickel silverwhich is produced by sintering. The hollow ground blade made of stainless N690 is forged by Böhler and contributes with its memorable shape to the incomparable appearance of the Scout. A classic  Back-lock keeps the blade safely open. When the knife is opened, the spine locks into a notch on the back of the blade. To close the knife, push down the exposed part of the spine. The harmonic overall impression of this classic is completed by pleasantly shaped handle scales made of Stag.

Specifications:

Steel: N690
Blade length: 3.149“ inch / 80 mm
Total length: 7.244” inch / 184 mm
Handle length: 4.094" inch / 104 mm
Handle scales: Stag Horn

Blade Thickness: Not specified
Overall weight 160 gr.

German Böker "Sherman EDC" Folding  Knife

- Made in Solingen / Germany -

Introduction:

The great success of the Boker M4 Sherman Damascus, which is due not only to the history of the historic Damascus steel but also to the design of the modern folder, has prompted us to use this as the basis for a leading and pleasing EDC with a Titanium framelock, which, despite the powder metallurgy of the blade, also carries a genuine piece of M4 Sherman Damascus.

For the blade of the Sherman EDC we have used Magnacut for the first time, which is not without reason being celebrated as a "miracle steel". Unlike the tool steels usually used, this steel was developed specifically for knife making. The three desirable properties of a steel - edge retention, toughness and rust resistance (stainless in the DIN category) - represent a conflict of goals. To make the steel rust-resistant, the addition of chromium is necessary, which makes the structure coarse, brittle and susceptible to fracture under normal conditions. High hardness, which has a positive influence on cutting durability, is usually achieved at the expense of toughness. With Magnacut, despite the high Chromium content of 10.7% and an impressive hardenability of over 62-63 HRC, it has been possible to achieve a very fine microstructure and thus high toughness and shock-load tolerance. The addition of nitrogen plays a central role here. Nitrogen is actually a steel pest in the alloy. However, due to sophisticated heat treatment, among other things, the nitrogen of the Magnacut is integrated into the crystalline lattice structure of the steel structure and thus achieves the otherwise contradictory material properties.

The central structural difference to the M4 Damascus model is the flipper, elegantly integrated into the contours, which allows the blade to slide open smoothly with a small impulse and invites you to play. The ball-bearing blade is opened alternatively by thumb stud and locked by a sturdy Titanium Framelock with stonewash finish. An overdrive stop acts as an over-extension protection for the lock. The milled titanium clip (tip-up/r) with a steel ball as well as the handle scales made of wild Carbon Fibre complete the harmonious overall picture.

A special highlight of the Boker Sherman EDC is the protruding backspacer made of Damascus, which is equipped with a lanyard hole in elongated slotted design. The Damascus of the backspacer was forged from various materials from the production of M4 Sherman tanks by Chad Nichols in the Customized Ladder pattern and is reminiscent of the tank tracks left in the ground by the heavy chains of the M4 Sherman.

Specifications:

Steel: MAGNACUT
Blade length: 2.952“ inch / 75 mm 
Total length: 7.007” inch / 178 mm 
Handle length: 4.055" inch / 103 mm
Handle scales: Carbon / Steel

Blade Thickness: 3,6 mm
Overall weight 95 gr.

German Böker "Trapper" - TRPPR Pocket Folding Knife

- Made in Solingen / Germany -

Introduction:

Discreet in its name - sovereign in appearance. The Boker TRPPR (pronounced: trapper) is an extraordinary gentleman's knife that transfers the spirit of the successful Boker Trapper into a new era. Although reduced to the essentials, the pocket-knife leaves nothing to be desired. The ball-bearing blade made of powder metallurgy Magnacut (62-63 HRC) opens silky smooth via a flipper, while the elegant integral framelock with stainless steel inlay and overtravel stop reliably secures the knife. The blade steel used is characterised above all by high wear resistance, high toughness and high corrosion resistance and is rounded off by an attractive two-tone finish. The long bolster of the titanium handle body reinterprets the nostalgic "Spirit of the times" and shapes the TRPPR with its handle scales made of MICARTA and its unique grain into a new model of contemporary knife culture. Decorative accents are set by the front blade axle screw, which features the famous Boker tree emblem, and the titanium clip (tip-up/r) milled from the solid with a ball. To protect it from dirt and scratches, the Boker TRPPR is supplied with a high-quality felt case. Handmade in the Boker Manufactory in Solingen.

Specifications:

Steel: MagnaCut
Blade length: 3.188“ inch / 81 mm
Total length: 7.440” inch / 189 mm
Handle length: 4.251" inch / 108 mm
Handle scales: Micarta

Blade Thickness: 2,5 mm
Overall weight 70 gr.

Fallkniven HK9L Exclusive Hunting Knife

- Made by Fällkniven -

Introduction:

The HK9 is a hunting knife for the advanced, experienced hunter who knows where to place the blade on the prey. It is also a good all-round knife. The knife feels sturdy in the hand, compact in a way, easy to use, and stable. It does not appear so, but when using the knife you have the feel that it is one of the world’s most advanced hunting knives you have in your hand. If not before, it is noticeable when beginning to cut – the laminated powder steel keeps an edge unbelievably well.

This knife is delivered with a very well made black leather sheath which keeps the knife safely without any snappers. The leather is about 3 mm thick and it has a thick liner along the sewing. Our idea is that the sheath will fit so tight to your belt that you should be able to push/pull the knife from its sheath by using one hand only. Keep the sheath clean and dry, regular shoeshine is OK but not grease because it makes the leather soft!

Specifications:

Steel: 3G HRC 62
Blade length: 3.54" inch / 90 mm
Total length: 7.68” inch / 195 mm
Handle length: 4.13” inch / 105 mm
Handle: Maroon Micarta

Blade thickness: 4.5 mm
Knife weight 182 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade Finish: Satin

Fallkniven Idun NL5L Hunting Knife

- Made by Fällkniven -

Introduction:

In Norse mythology, Idun was the goddess of fertility, and was responsible for guarding the apples that ensured the gods eternal youth. To many, she was also a symbol of love and rebirth, and in a famous poem she was referred to as the lover of the gods (ása leika). Unlike earlier knife models in the Northern Lights series, the NL5 is a little rounder and softer in form, and therefore an excellent choice as a hunting knife. The straight, fairly generous leather grip gives complete control over the powerful laminated VG7 blade. The NL5L is as attractive as it is effective especially in the hands of the experienced hunter. When it comes to the Northern Light Series nothing has been spared to make this knife as strong, beautiful and comfortable as possible. The knife is a pleasure to look at and a thrill to use.

The blade is made out of laminated VG7 steel, where the edge is in a technically well-designed VG7 steel and the sides consist of tough, all-stainless 420J2 steel. This combination is good since it brings together all conceivable and desirable properties such as resilience, resistance to torque, and edge-durability in a single blade. A 5 mm thick blade in itself would be strong enough for most tasks – with laminate technology one can expect an additional 20% strength in the form of resistance to bending, as compared to an ordinary VG7 blade.

The beautiful handle consists of specially selected oxhide that gives a sure and rugged grip. It ages with elegance and as the years pass it acquires an attractive brown patina. The handle is unaffected by oil and solvents and impervious to water. When the oxhide drys out, small cracks on the handle can appear, but they disappear when the knife is put to use again.

We at Fallkniven believe the convex edge to be the ultimate combination of cutting performance and edge strength. Anyone who knows anything about knife making knows that such an edge can only be made by hand, and that’s why 99.99% of all knives don’t have that kind of edge. Machines play a large part in how knives are made, and CNC (Computer Numerically Controlled) robots and grinders shape the blades as best they can. The machines are loaded with stacks of blade blanks so that production can go on 24 hours a day and the result is quite often quite good. Well, good for the price anyway. However, if you want top-drawer strength, tremendous corrosion-resistance, edge durability and custom design, no machine can come close to the craftsmanship of a trained and skilled knifesmith. Therefore, we take great pride in presenting our Northern Light Series even though we know that only the most quality-conscious knife user will appreciate its features.

Each Northern Lights series knife comes with a high-quality black leather sheath.

Specifications:

Steel: Laminated VG7 Wolf HRC 59
Blade length: 3.94" inch / 100 mm
Total length: 8.46” inch / 215 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Leather

Blade thickness: 5 mm
Knife weight 170 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather 

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Protruding Broad Tang

Fallkniven Next Generation F1L3Gbm Hunting Knife

- Made by Fällkniven -

Introduction:

The Fällkniven F1L3Gbm is an excellent and thoroughly developed hunting knife, which meets all requirements. With this very high-quality hunting knife in the premium class, you fulfill the desire of a real Dream-Knife. Fällkniven has not spared any expense to produce this high-end product. The handle medallion in nickel silver is covered with about 30 my thick layer of 24k gold, usually you use 2-3 my only. Guard, tubular rivet and handle rivets are made in nickel silver on this exquisite full tang knife. The knife comes with an all-black leather sheath in a neat wood gift box.

Specifications:

Steel: 3G HRC 62
Blade length: 3.98" inch / 101 mm
Total length: 8.27” inch / 210 mm
Handle length: 4.29” inch / 109 mm
Handle scales: Black Micarta

Blade thickness: 4,5 mm
Knife weight 197 gr.

Additional Information:

Edge: Convex

Leather Sheath: Included

Handle: Lanyard Hole

Finger Guard: Nickel Silver

Tang: Full Tang

Blade Finish: Satin

Gift Box: Included

Fallkniven Tre Kronor TK2z Hunting Knife

- Made by Fällkniven -

Introduction:

Tre Kronor, the Swedish knife series, offers a highly advanced technological solution combined with timeless Swedish design. As the result of a long development process, we are the first company in the world to be able to offer a laminated knife blade in 3G steel, edged with sintered steel, or powder steel. To this edge steel, we have added a resilient, anticorrosive steel which stabilizes the hard centre. This gives a rigid, strong blade that retains its edge extremely well. These knives are in the Swedish minimalist idiom, where form harmonizes with function. The result is an edged implement that the user will find an easy and accommodating knife — a world-beater from Sweden.

Tre Kronor #2
If price and performance are the deciding factors, then TK2 is the hands-down winner. The secure, comfortable grip and the powerful blade in laminated powder steel form a combination whose value is unparalleled in the world. It is a utility knife which one can rely on and which will perform for you through thick and thin. The knives are delivered in ordinary white box.

Specifications:

Steel: 3G HRC 62
Blade length: 3.94" inch / 100 mm
Total length: 8.46” inch / 215 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Thermorun

Blade thickness: 4,5 mm
Knife weight 185 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather 

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Full Tang

FOX Elite Damascus 273 DOL Folding Knife

- Made by Fox Knives in Italy -

Design by: "Fox Knives".

Introduction:

The elegant Elite Damascus 273 pocket knife from Fox-Knives impresses not only with its high quality, but also with the balanced price-performance ratio.

Specifications:

Steel: Damasteel® RWL34 + PMC27 Super Dense Twist™ HRC 58-60 
Blade length: 3.15" inch / 80 mm
Total length: 7.48” inch / 190 mm
Handle length: 4.33” inch / 110 mm
Handle scales: Olive Wood 

Blade thickness: 3 mm
Overall weight 95 gr.

Additional Information:

Box: Included

Blade: Damascus

Bolsters: Stainless steel AISI 304

FOX Fairbairn Sykes FX-592 WAF Dagger

- Made by Fox Knives in Italy -

Design by: "Hill Knives".

Introduction:

Hill Knives:

“Dutch Commando Dagger is Based on the original Fairbairn Sykes design. It is a collector’s knife to honor the special forces of the world.”

The Dutch Knifemaking company Hill Knives was founded in 1979 by Frans van den Heuvel † (father) and Albert van den Heuvel (son), who both have a technical background as toolmakers. “What makes Hill Knives extraordinary is our passion and drive to create the ultimate quality and design when it comes to our knives".

- Please select your desired version in the selection menu above -

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 6.69" inch / 170 mm
Total length: 11.81” inch / 300 mm
Handle length: 5.12” inch / 130 mm
Handle: Anodized T6-6082 black anodized or Walnut wood

Blade thickness: 5 mm
Overall weight 205 gr.

Additional Information:

Blade Coating: Physical Vapor Deposition (PVD)

Leather Sheath: Included

PVD
(Physical Vapor Deposition) is a variety of vacuum deposition methods used to deposit thin films by the condensation of a vaporized form of the desired film material onto various workpiece surface. The coating method involves purely physical process such as high temperature vacuum evaporation with subsequent condensation.

FOX "FX-525 Ti BL" Terzuola Titanium Frame Lock Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bob Terzuola".

Introduction:

This knife is a “Every Day Carry” designed for daily utility and self defense. It is compact and strongly made with fine materials. Easy to carry with its convenient clip.

Bob Terzuola:

"I always design my knives to be functional but graceful. Utility is always the main factor in my designs as a knife should be perfectly useful and comfortable in a variety of positions and cutting situations”.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.35" inch / 90 mm
Total length: 7.87” inch / 200 mm
Handle length: 4.53” inch / 110 mm
Handle scales: Bead blasted gray titanium  / Anodized blue titanium 

Blade thickness: 3 mm
Overall weight: 3.53 oz / 100 gr.

Additional Information:

Blade: Stone washed

Handle: Hole for Safety Cord

Clip: Anodized titanium

FOX FX-F2017 40th Anniversary Collectors Folding Knife

- Made by Fox Knives in Italy -

Design by: "Fox Knives".

Introduction:

To celebrate their 40th anniversary, FOX Cutlery, revisited in a modern key their
first folding knives (594 Silver Collection).  Fox-Knives Italy 1977 - 2017.

Specifications:

Steel: M390 stainless steel HRC 56-58
Blade length: 3.35" inch / 85 mm
Total length: 7.48” inch / 190 mm
Handle length: 4.13” inch / 105 mm
Handle scales: Marble carbon fiber

Blade thickness: 3.5 mm
Overall weight 120 gr.

Additional Information:

Blade Coating: Satin

Clip: titanium

Bag: Included