102mm

Fallkniven F1xb Survival Knife

- Made by Fällkniven -

Introduction:

Your X-knife is the strongest, sharpest and safest stainless steel knife in production. If your life is in danger, you can always rely on your X-knife. It is designed to withstand all the stresses applied by the human hand, which means that it is virtually indestructible. It assumes, however, that you are careful with the knife and that it is used  as intended, namely as a sharp precision tool. The basis of the X-knife’s strength lies in the laminated cobalt steel, and also in the well-thought-out construction in which break zones have been eliminated. Together with the hand-shaped convex edge, the X-knife is a concept that beats everything else in the world in terms of safety and comfort. In their usual way, they have put a lot of energy into designing a safe knife sheath, which is actually where the knife will spend most of its time. The design of the sheath determines the access to the knife, and here they have really put all their efforts in order to get a safe sheath that allows easy access to the knife. The sheath has both a transport lock (the folding bracket with a strap) and a working safety detail that allows the knife to be in place until you decide to use it. It is a bit a belt-and-braces approach, but we like putting safety first – a lost knife is of no use. The transport lock will therefore allow the knife to be fastened tip-up or tip-down on the body or on your equipment without any risk. A few words about the all-black version: This surface is the hardest we have ever encountered. Although we really tried to wear down the black coating with the toughest, driest curly birch we could find, we never succeeded in getting holes in this extremely hard, durable surface. Still, we cannot guarantee that it will stay for time and eternity, after all, the blade can be ground and certainly a diamond or ceramic stone will bite on the surface. Also for example a grain of sand can scratch or leave a mark in the coating. The hardness is at 2400 HV (Vickers) or around HRC 83.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 4.02" inch / 102 mm
Total length: 8.66” inch / 220 mm
Handle length: 4.64” inch / 118 mm
Handle scales: Thermorun

Blade thickness: 5 mm
Knife weight 222 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Full Tang

Blade: Tungsten Carbine

Laminated CoS: A newly developed high alloy cobalt-special steel

Muela Kodiak-10A Stag Bushcraft Knife

- Handcrafted in Spain by Muela -

The Kodiak from Muela has been one of the Spanish manufacturer's most popular knives for years and has become a constant companion for many hunters. The knife is made from a single piece of steel and is therefore also ideal for robust work, the full strength continuous blade gives the knife exceptional stability. Muela uses hand-picked staghorn, attached Nickel-Silver bolsters and a lanyard hole to complete the noble features of the handle. The matching leather sheath is secured with a snap fastener.

Specifications:

Steel: Mova 4116  (X50CrMoV15)
Blade length: 3.937” inch / 102 mm
Total length: 8.267” inch /  216 mm
Handle length: 4.330” inch / 114 mm
Handle scales: Staghorn
Blade thickness: 3.9 mm
Knife weight 209 gr.

– Lanyard hole for Safety Cord

Muela Kodiak-10CO Bushcraft Full Tang Knife

- Handcrafted in Spain by Muela -

The Kodiak from Muela has been one of the Spanish manufacturer's most popular knives for years and has become a constant companion for many hunters. The knife is made from a single piece of steel and is therefore also ideal for robust work, the full strength continuous blade gives the knife exceptional stability. Muela uses hand-picked Cocobolo Wood, attached Nickel-Silver bolsters and a lanyard hole to complete the noble features of the handle. The matching leather sheath is secured with a snap fastener.

Specifications:

Steel: Mova 4116  (X50CrMoV15)
Blade length: 3.937” inch / 102 mm
Total length: 8.267” inch /  216 mm
Handle length: 4.330” inch / 114 mm
Handle scales: Cocobolo Wood
Blade thickness: 3.9 mm
Knife weight 184 gr.

– Lanyard hole for Safety Cord

Muela Kodiak-10G.M Bushcraft Full Tang Knife

- Handcrafted in Spain by Muela -

Modern outdoor version of the successful Kodiak model with choil ground Sandvik 14C28N High Grade Stainless Steel blade and indestructible, full-length mircata scales. The dimensions of the Kodiak Combo comply with the other already known Kodiak model; however it features a green canvas Micarta handle for enhanced grip. The blade is made of niobium-alloyed 14C28N by Sandvik and convinces with excellent cutting performance. Comes with black leather sheath including integrated fire starter. Can be carried horizontally or vertically.

Specifications:

Steel: Sandvik 14C28N
Blade length: 4.015” inch / 102 mm
Total length: 8.503” inch /  216 mm
Handle length: 4.488” inch / 114 mm
Handle scales: Green Micarta
Blade thickness: 3.9 mm
Knife weight 209 gr.

– Lanyard hole for Safety Cord

Additional Information about Sandvik 14C28N steel:

One of the best stainless steels to make knives. Increased nitrogen in the formula enables 14C28N to provide both excellent corrosion resistance and the ability to be hardened to 58-61 Rockwell.

Muela Kodiak-10M Bushcraft Knife

- Handcrafted in Spain by Muela -

The Kodiak from Muela has been one of the Spanish manufacturer's most popular knives for years and has become a constant companion for many hunters. The knife is made from a single piece of 1.4116 Mova steel and is therefore also ideal for robust work, the full strength continuous blade gives the knife exceptional stability. Muela uses Micarta, attached nickel silver bolsters and a lanyard hole to complete the noble features of the handle. The matching leather sheath is secured with a snap fastener.

Specifications:

Steel: MOVA 1.4116 stainless steel
Blade length: 4.015” inch / 102 mm
Total length: 8.503” inch /  216 mm
Handle length: 4.488” inch / 114 mm
Handle scales: Black Micarta
Blade thickness: 3.9 mm
Knife weight 200 gr.

– Lanyard hole for Safety Cord

Additional steel information:

MOVA 1.4116 stainless steel (X50CrMoV15). It´s classic steel used in fixed knives and folding knives. An excellent combination of Molybdenum and Vanadium that is highly stain resistant, though and corrosion resistant.