141mm - 180mm

German Böker "Trench" Knife Grabendolch

- Made in Solingen / Germany -

Introduction:

During the positional war during the First World War and the resulting trench warfare, many of the insufficiently equipped soldiers developed auxiliary weapons, which were manufactured in field forges and workshops on and behind the front. In the course of the battles, however, it became clear that the soldiers' equipment and armament did not meet the requirements of this particular fighting style. In 1915 Boker was therefore commissioned by the Ministry of War to develop a compact combat knife that was ideally suited for precisely this purpose.
The true-to-the-original Boker Trench Knive also has a stainless steel blade made of C75. This carbon steel with an enormous edge retention requires appropriate care today as it did then. The massive stainless steel crossguard, the old official tang stamp on the blade, the local ribbed wood handle and the authentic sheath made of high-quality leather are also part of the original equipment. The knives are marked with a serial number.

Specifications:

Steel: C75 CARBON STEEL
Blade length: 5.669“ inch / 144 mm
Total length: 10.078” inch / 256 mm
Handle length: 4.409" inch / 112 mm
Handle scales: Walnut Wood

Blade Thickness: 3.39 mm
Overall weight 165 gr.

Additional informations about C75 steel:

C75 is a classic non-stainless carbon steel we use for special projects in our manufacture in Solingen. Carbon steel soon develops its typical blue-gray patina that is not a flaw but a natural property of the material.

Cudeman 125-M or 125-MC  JJ.SK2 Bushcraft Survival Knife

- Made by Cudeman in Spain -

Cudeman Survival Knife with Böhler blade. Serial numbered.

There are two Editions, Standard or Special.

The Special Edition has a luxury sheath with extras.

- Please select your desired version in the selection menu above -

Specifications:

Steel: BÖHLER N-695  59/61 HRC
Blade length: 6.102” inch / 155 mm
Total length: 10.630” inch / 270 mm
Handle length: 4.528” inch / 115 mm
Handle scales: Black Micarta with Detailed Red Line
Blade thickness: 5.33 mm
Overall weight 318 gr.

Description:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Clip-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

 

Standard Edition Sheath Version:

– Black Leather Multi-position Sheath

– Hole for a Safety Cord

– Glass-Breaker

– Groove on the Spine to make Sparks

– Indentation for Advanced Fire Lighting with Wooden Bow Technique

– Firesteel

– Paracord 280 cm

– Sheath weight : 163 gr.

Special Edition Sheath Version:

– Black Leather Multi Position Sheath

– Sheath Weight 394 gr.

– Glass-Breaker

– Hole for a Safety Cord

– Paracord 280 cm

– Firesteel

– Leather Loop with Accessories

– Groove on the Spine to make Sparks

– Indentation for Advanced Fire Lighting with Wooden Bow Technique

– Sharpening Stone with Signal Mirror, Ruler (12cm), Compas and Sundial

Cudeman 125-X or 125-XC JJ.SK2 Bushcraft Survival Knife

- Made by Cudeman in Spain -

Cudeman Survival Knife with Böhler blade. Serial numbered.

There are two Editions, Standard or Special.

The Special Edition has a luxury sheath with extras.

- Please select your desired version in the selection menu above -

Specifications:

Steel: BÖHLER N695  59/61 HRC
Blade length: 6.102” inch / 155 mm
Total length: 10.630” inch / 270 mm
Handle length: 4.528” inch / 115 mm
Handle scales: Brown Micarta with Detailed Red Line
Blade thickness: 5.33 mm
Overall weight 318 gr.

Description:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Clip-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

 

Standard Edition Sheath Version:

– Brown Leather Multi-position Sheath

– Hole for a Safety Cord

– Glass-Breaker

– Groove on the Spine to make Sparks

– Sheath weight : 163 gr.

Special Edition Sheath Version:

– Brown Leather Multi Position Sheath

– Sheath Weight 394 gr.

– Glass-Breaker

– Hole for a Safety Cord

– Paracord 280 cm

– Firesteel

– Leather Loop with Accessories

– Groove on the Spine to make Sparks

– Indentation for Advanced Fire Lighting with Wooden Bow Technique

– Sharpening Stone with Signal Mirror, Ruler (12cm), Compas and Sundial

Cudeman 140-MK Asalto Outdoor Bushcraft Knife

- Made by Cudeman in Spain -

Kydex Sheath included.

Introduction:

Cudeman Bushcraft Knife with Böhler blade. Serial numbered.

Specifications:

Steel: BÖHLER N-695 59/61 HRC
Blade length: 6.890” inch / 145 mm
Total length: 11.614” inch / 265 mm
Handle length: 4.724” inch / 120 mm
Handle scales: Black Micarta with Detailed Red Line
Blade Width: 5 mm
Knife weight 380 gr.

Description:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Drop-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

– KYDEX Black Sheath

– Hole for a Safety Cord

– Glass-Breaker

– Sheath Weight: 211 gr.

Cudeman 161-L Hunting Machete Knife Set

- Made by Cudeman in Spain -

Introduction:

Cudeman Hunting Knife Set with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Molybdenum Steel 54/56 HRC

Blade length large machete: 5.906” inch / 150 mm
Blade length small knife: 3.150” inch / 80 mm

Total length large machete: 10.433" inch / 265 mm
Total length small knife: 6.693" inch / 170 mm

Handle length large machete: 4.528” inch /  115 mm
Handle length small knife: 3.543” inch /  90 mm

Blade thickness large machete: 4.5 mm
Blade thickness small knife: 3 mm
Handle scales: Satin Olive Wood

Knife weight 381-62 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 126 gr.

– Fixation of the Handle: Flat-Head Rivets

– Blade shape: Macheta/Drop-Point

– Grind: Full Flat/Hollow Grind

– Blade Finish: Satin Finish

– Hole for Safety Cord

Cudeman 177-H Tactical Hunting Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman Tactical Hunting Knife with MOVA blade.

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 5.906” inch / 150mm
Total length: 10.630” inch / 270 mm
Handle length: 4.724” inch / 120 mm
Handle scales: Black Rubber
Blade thickness: 5 mm
Net weight 244 gr.

Additional Info:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Drop-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

– Saw on the Spine

– Ballistic Nylon Sheath

– Hole for a Safety Cord

– Sheath Weight: 140 gr.

Cudeman 177-N Tactical Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman ALL BLACK Tactical Hunting Knife with MOVA blade.

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 5.906” inch / 150mm
Total length: 10.630” inch / 270 mm
Handle length: 4.724” inch / 120 mm
Handle scales: Black Rubber
Blade thickness: 5 mm
Net weight 244 gr.

Additional Info:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Drop-Point

– Grind: Hollow Grind

– Blade Finish: Black Coated Finish

– Saw on the Spine

– Ballistic Nylon Sheath

– Hole for a Safety Cord

– Sheath Weight: 140 gr.

Cudeman 248-C Full Tang Stag Hunting Knife

- Made by Cudeman in Spain -

Cudeman Hunting Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 5.906” inch / 150 mm
Total length: 8.268” inch /  265 mm
Handle length: 4.331” inch / 115 mm
Handle scales: Polished Deer
Blade thickness: 4 mm
Knife weight 257 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 89 gr.

– Fixation of the Handle: Oval-Head Rivets

– Bolster: A-304 Stainless Steel

– Blade Shape: Standard

– Grind: Hollow Grind

– Blade Finish: Satin Finish

– Hole for Safety Cord

– Handmade Decoration on the Handle

Cudeman 248-L Full Tang Hunting Knife

- Made by Cudeman in Spain -

Cudeman Hunting Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 5.906” inch / 150 mm
Total length: 8.268” inch /  265 mm
Handle length: 4.331” inch / 115 mm
Handle scales: Satin Olive Wood
Blade thickness: 4 mm
Knife weight 257 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 89 gr.

– Fixation of the Handle: Oval-Head Rivets

– Bolster: A-304 Stainless Steel

– Blade Shape: Standard

– Grind: Hollow Grind

– Blade Finish: Satin Finish

– Hole for Safety Cord

– Handmade Decoration on the Handle

Cudeman 261-C Dagger Hunting Stag Knife

- Made by Cudeman in Spain -

Cudeman Hunting Dagger with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Molybdenum Steel 54/56 HRC
Blade length: 6.496” inch / 165 mm
Total length: 11.024” inch / 280 mm
Handle length: 4.528” inch / 115 mm
Handle scales: Polished Deer
Blade thickness: 5 mm
Knife weight 282 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 96 gr.

– Fixation of the Handle: Oval-Head Rivets

– Blade shape: Dagger

– Grind: Hollow Grind

– Finger Guard: 420 Polished Stainless Steel

– Blade Finish: Satin Finish

– Fuller on the Blade

Cudeman 261-L Dagger Hunting Knife

- Made by Cudeman in Spain -

Cudeman Hunting Dagger with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Molybdenum Steel 54/56 HRC
Blade length: 6.496” inch / 165 mm
Total length: 11.024” inch / 280 mm
Handle length: 4.528” inch / 115 mm
Handle scales: Satin Olive Tree Wood
Blade thickness: 5 mm
Knife weight 282 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 96 gr.

– Fixation of the Handle: Oval-Head Rivets

– Blade shape: Dagger

– Grind: Hollow Grind

– Finger Guard: 420 Polished Stainless Steel

– Blade Finish: Satin Finish

– Fuller on the Blade

Fallkniven A1bL Survival Knife

- Made by Fällkniven -

Introduction:

A new world standard was set with the Fallkniven A1 through attention to important details including technical design, ergonomics and economy. The Fallkniven A1 surpasses international standards for strength, personal security capabilities, and value for money. The Fallkniven A1 is an all-purpose knife on the larger side designed for heavy duty use. The powerful blade is made of extremely hard and tough laminated VG10 steel, and will withstand the stress of hard use. The knife is superb at chopping as well finer daily cutting tasks thanks to the ergonomic grip. The full tang goes entirely through the handle so you can strike with the end of it without breaking the grip. The sturdy black leather sheath allows you to fasten the knife on your belt or your pack, and even upside down. The Fallkniven A1 is unaffected by water and works equally well in extreme cold and stifling heat. If your needs require that no reflections come from your knife blade, we offer a black CeraKote option. The CeraKote is an extremely tough surface coating that will also protect the blade from corrosion. CeraKote is a hard coating made of Teflon and ceramics that we apply for military users and others who want to avoid shiny blades. Be aware, however, that although CeraKote is an industry standard, it is also just a finish applied to the metal blade similar to painting a car. Please note that physical abrasions could scratch through the CeraKote coating. Over time, the black CeraKote may separate from the blade, but more durable coatings make the knife difficult to sharpen and cost up to 100 times more than CeraKote.

Attaching a black surface on a rust resistant, perfectly smooth blade so that it sticks for time and eternity is all impossible. We have tested some extremely hard coatings, but they proved to be many times more expensive and make it harder to sharpen the knife.

Specifications:

Steel: Laminated VG10 HRC 59

Blade length: 6.30" inch / 160 mm
Total length: 11.02” inch / 280 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Kraton

Blade thickness: 6 mm
Knife weight 319 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade: Black Coated

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven A1bz Survival Knife

- Made by Fällkniven -

Introduction:

A new world standard was set with the Fallkniven A1 through attention to important details including technical design, ergonomics and economy. The Fallkniven A1 surpasses international standards for strength, personal security capabilities, and value for money. The Fallkniven A1 is an all-purpose knife on the larger side designed for heavy duty use. The powerful blade is made of extremely hard and tough laminated VG10 steel, and will withstand the stress of hard use. The knife is superb at chopping as well finer daily cutting tasks thanks to the ergonomic grip. The full tang goes entirely through the handle so you can strike with the end of it without breaking the grip. The sturdy black leather sheath allows you to fasten the knife on your belt or your pack, and even upside down. The Fallkniven A1 is unaffected by water and works equally well in extreme cold and stifling heat. If your needs require that no reflections come from your knife blade, we offer a black CeraKote option. The CeraKote is an extremely tough surface coating that will also protect the blade from corrosion. CeraKote is a hard coating made of Teflon and ceramics that we apply for military users and others who want to avoid shiny blades. Be aware, however, that although CeraKote is an industry standard, it is also just a finish applied to the metal blade similar to painting a car. Please note that physical abrasions could scratch through the CeraKote coating. Over time, the black CeraKote may separate from the blade, but more durable coatings make the knife difficult to sharpen and cost up to 100 times more than CeraKote.

Attaching a black surface on a rust resistant, perfectly smooth blade so that it sticks for time and eternity is all impossible. We have tested some extremely hard coatings, but they proved to be many times more expensive and make it harder to sharpen the knife.

Specifications:

Steel: Laminated VG10 HRC 59

Blade length: 6.30" inch / 160 mm
Total length: 11.02” inch / 280 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Kraton

Blade thickness: 6 mm
Knife weight 319 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade: Black Coated

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven A1L Survival Knife

- Made by Fällkniven -

Introduction:

A new world standard was set with the Fallkniven A1 through attention to important details including technical design, ergonomics and economy. The Fallkniven A1 surpasses international standards for strength, personal security capabilities, and value for money. The Fallkniven A1 is an all-purpose knife on the larger side designed for heavy duty use. The powerful blade is made of extremely hard and tough laminated VG10 steel, and will withstand the stress of hard use. The knife is superb at chopping as well finer daily cutting tasks thanks to the ergonomic grip. The full tang goes entirely through the handle so you can strike with the end of it without breaking the grip. The sturdy black leather sheath allows you to fasten the knife on your belt or your pack, and even upside down. The Fallkniven A1 is unaffected by water and works equally well in extreme cold and stifling heat.

Specifications:

Steel: Laminated VG10 HRC 59
Blade length: 6.30" inch / 160 mm
Total length: 11.02” inch / 280 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Kraton

Blade thickness: 6 mm
Knife weight 319 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade: Satin Finish

VG10: A well known high alloy molybdenum/cobalt steel

 

Muela Bisonte-11.OL Hunting Knife

- Handcrafted by Muela in Spain -

Introduction:

Muela Bisonte Skinner Gut Hook knife. In this beautiful knife you can see the attention to detail. Muela uses only the finest materials to produce their high quality knives. The Bisonte is a very fine skinner knife, which is supplied with finest Olive Wood handle. The steel has a Rockwell hardness of 57-58 HRC. A high quality brown leather is included and belongs to this beautiful knife.

Specifications:

Steel: 1.4116 Stainless Steel = “MOVA”  (X50CrMoV15)
Blade length: 3.937” inch / 100 mm
Total length: 8.267” inch /  210 mm
Handle length: 4.330” inch / 110 mm
Handle: Olive Wood

Knife weight: 220gr.

Steel quality informations 1.4116:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Muela Bisonte-11AP Hunting Knife

- Handcrafted by Muela in Spain -

Introduction:

Muela Bisonte Skinner Gut Hook knife. In this beautiful knife you can see the attention to detail. Muela uses only the finest materials to produce their high quality knives. The Bisonte is a very fine skinner knife, which is supplied with finest PHENOL-CRAFT handle. The steel has a Rockwell hardness of 57-58 HRC. A high quality Camouflage Cordura sheath is included and belongs to this beautiful knife.

Specifications:

Steel: 1.4116 Stainless Steel = “MOVA”  (X50CrMoV15) -56-58 HRC
Blade length: 4.527” inch / 115 mm
Total length: 9.055” inch /  230 mm
Handle length: 4.527” inch / 115 mm
Handle: Phenolcraft

Blade thickness: 4 mm

Knife weight: 220 gr.

Steel quality informations 1.4116:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Muela Buffalo-17M Hunting Knife

- Handcrafted in Spain by Muela -

The Muela Buffalo hunting knife impresses with its stability on the one hand, but also with its elegant blade shape. Butt cup and guard were made of polished brass. The fine leather sheath belongs to to this beautiful hunting knife.

Specifications:

Steel: 1.4116 Stainless Steel = “MOVA”  (X50CrMoV15)

Blade length: 6.692” inch / 170 mm
Total length: 11.417” inch /  290 mm
Handle length: 4.724” inch / 120 mm
Handle scales: Pakka Wood
Knife weight 320 gr.

Additional Steel Information:  

1.4116 Mova. It´s classic steel used in fixed knives and folding knives. An excellent combination of Molybdenum and Vanadium that is highly stain resistant, though and corrosion resistant.

Muela "Caribu.A" Pig Sticker Hunting Dagger

- Handcrafted by Muela in Spain -

Introduction:

This is the Muela Caribu dagger pig sticker. Muela uses only the finest materials to produce their high quality knives. This beautful dagger is supplied with finest stag horn handle. The steel has a Rockwell hardness of 57-58 HRC. The pommel and the guard are made from polished stainless steel. A high quality brown leather is included and belongs to this beautiful knife.

Specifications:

Steel: 1.4116 Stainless Steel = “MOVA”  (X50CrMoV15) - 57-58 HRC
Blade length: 8.661” inch / 220 mm
Total length: 13.582” inch /  345 mm
Handle length: 4.921” inch / 125 mm
Handle: Stag Horn

Knife weight: 330 gr.

Blade Thickness: 4.5 mm

Steel quality informations 1.4116:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Muela "Caribu-OL" Pig Sticker Hunting Dagger

- Handcrafted by Muela in Spain -

Introduction:

This is the Muela Caribu dagger pig sticker. Muela uses only the finest materials to produce their high quality knives. This beautful dagger is supplied with finest Olive Wood handle. The steel has a Rockwell hardness of 57-58 HRC. The pommel and the guard are made from polished brass. A high quality brown leather is included and belongs to this beautiful knife.

Specifications:

Steel: 1.4116 Stainless Steel = “MOVA”  (X50CrMoV15)
Blade length: 8.661” inch / 220 mm
Total length: 13.582” inch /  345 mm
Handle length: 4.921” inch / 125 mm
Handle: Olive Wood

Knife weight: 330 gr.

Steel quality informations 1.4116:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Muela "Cazorla" CAZ-16 Bowie Hunting Knife

- Handcrafted by Muela in Spain -

Introduction:

The Cazorla presents itself as a classic rendition whose gently rounded stag handle is truly a smooth operator, featuring a  lanyard hole at the pommel. The  stainless steel parrying element ensures secure handling, and the satin-finished 1.4116 stainless steel hollow-ground blade is reminiscent of the traditional Bowie shape. Includes leather sheath.

Please keep in mind that stag horn is a naturally grown horn and therefore always looks different.

Specifications:

Steel: 1.4116 Stainless Steel = “MOVA”  (X50CrMoV15) - 58-60 HRC
Blade length: 6.299” inch / 160 mm
Total length: 11.614” inch /  295 mm
Handle length: 5.314" inch / 135 mm
Handle: Stag Horn

Knife weight: 215 gr.

Blade thickness: 4 mm

Steel quality informations 1.4116:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Muela "Cazorla" CAZ-16R Bowie Hunting Knife

- Handcrafted by Muela in Spain -

Introduction:

The Cazorla presents itself as a classic rendition whose gently rounded pakka wood handle is truly a smooth operator, featuring a  lanyard hole on the pommel. The  stainless steel parrying element ensures secure handling, and the satin-finished 1.4116 stainless steel hollow-ground blade is reminiscent of the traditional Bowie shape. Includes leather sheath.

Specifications:

Steel: 1.4116 Stainless Steel = “MOVA”  (X50CrMoV15)
Blade length: 6.299” inch / 160 mm
Total length: 11.023” inch /  280 mm
Handle length: 4.724inch / 120 mm
Handle: Rose Wood

Knife weight: 188gr.

Blade thickness: 4.5 mm

Steel quality informations 1.4116:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Muela "Cherokee-19R" Bowie Hunting Knife

- Handcrafted by Muela in Spain -

Introduction:

The bigger brother of the Muela Carzorla has an equally pleasant pakka wood handle that in this case is additionally hemmed by a stainless steel clamp below the parrying element. The 1.4116 steel blade has a choil grind and features a less pronounced Bowie shape with a hinted false edge. Includes leather sheath with additional decorative leather strap.

Specifications:

Steel: 1.4116 Stainless Steel = “MOVA”  (X50CrMoV15)
Blade length: 7.598” inch / 193 mm
Total length: 12.519” inch /  318 mm
Handle length: 4.921” inch / 125 mm
Handle: Coral Pakka Wood

Knife weight: 272

Blade thickness: 4.7 mm

Steel quality informations 1.4116:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Muela Gred-17 Gredos Bowie Knife

- Handcrafted by Muela in Spain –

Introduction:

The Muela "Gredos" Hunting Knife, is a very good companion on hunt. Muela used the finest materials for this beautiful Bowie knife. This awesome hunting comes with high quality leather sheath. Guard & Pommel made of stainless steel.

Specifications:

Steel: Mova 1.4116 (X50CrMoV15)
Blade length: 9.055 inch / 165 mm
Total length: 14.566” inch /  285 mm
Handle length: 5.511” inch / 120 mm
Handle: Staghorn

Knife weight: 250 gr.

Blade thickness: 3.5 mm

Additional informations about the steel quality:

“MOVA” 1.4116 (X50CrMoV15). It´s a classic steel. An excellent combination of Molybdenum and Vanadium that is highly stain resistant, though and corrosión resistant.

Muela Grizzly-12.OL Skinner Knife

- Handcrafted by Muela in Spain -

Introduction:

Muela Grizzly Skinner Gut Hook knife. In this beautiful knife you can see the attention to detail. Muela uses only the finest materials to produce their high quality knives. The Grizzly is a very fine gut hook knife, which is supplied with finest Olive Wood handle. The steel has a Rockwell hardness of 57-58 HRC. A high quality brown leather is included and belongs to this beautiful knife.

Specifications:

Steel: 1.4116 Stainless Steel = “MOVA”  (X50CrMoV15)
Blade length: 4.724” inch / 120 mm
Total length: 9.055” inch /  230 mm
Handle length: 4.330” inch / 110 mm
Handle: Olive Wood

Knife weight: 255 gr.

Steel quality informations 1.4116:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Muela "Hunter-17R" Bowie Outdoor & Hunting Knife

- Handcrafted by Muela in Spain –

Introduction:

Here we offer you a fantastic bowie knife made by Muela in Spain. In this wonderful Bowie knife you can see the attention to detail. Muela uses only the finest materials to produce their high quality knives. This is a beautiful bowie knife, which is supplied with finest Rosewood handle. The guard and the pommel is made of polished stainless steel. The steel has a Rockwell hardness of 57-58 HRC. A high quality brown leather is included and belongs to this fine knife.

Specifications:

Steel: 1.4116 Stainless Steel = “MOVA”  (X50CrMoV15)
Blade length: 6.889” inch / 175 mm
Total length: 11.417” inch /  290 mm
Handle length: 4.527” inch / 115 mm
Handle: Rose Wood

Knife weight: 270

Steel quality informations 1.4116:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.