181mm - 220mm

German Böker Eight-Eight (8-8) Flak Damascus Collector's Dagger

- Made in Solingen / Germany -

Introduction:

Boker presents its first military-historical artillery project with the Eight-Eight (8-8) Flak Damascus collector's dagger. The 8.8 cm Flak (short for anti-aircraft gun) is considered by many connoisseurs to be the best and undisputedly most versatile gun of the Second World War. Originally developed for anti-aircraft defence, the Eight-Eight (8-8) established its legendary reputation above all in ground combat.

While anti-tank guns with 3.7 cm to a maximum of 7.5 cm were notoriously under-calibrated for the contemporary armour, anti-aircraft guns regularly had relatively large barrel diameters. It quickly became apparent that only the eight-eight was capable of reliably penetrating the armour of the heavy British Matilda II tank or the Soviet T-34, for example, and above all at greater distances of up to 2,000 metres. The pre-requisite for this was that the barrel of the 8.8 cm anti-aircraft gun could be swivelled to a negative angle of inclination - absolutely untypical for an anti-aircraft gun. This made it possible to lower the barrel below the horizontal plane in order to engage ground targets. The gun could also be swivelled 360° around its vertical axis on a column mount with four cross-shaped outriggers. Another advantage of the eight-eight (8-8) was its speed. On the one hand, this resulted from the short time in which the cross mount could be mounted and dismounted, and the gun could therefore be moved. Another was the high rate of fire. As a semi-automatic cannon with a decelerated barrel recoil, the breech was opened after each shot, the percussion piece cocked, and the empty cartridge ejected. A well-trained operating crew, usually consisting of 9 soldiers, could fire up to 20 rounds per minute. As a result, the German anti-aircraft soldiers were able to shoot down 9 out of 1,000 incoming aircraft.

This figure seems soberingly small, but it is still considered to be the highest firing rate of an anti-aircraft gun in the history of war. The 8.8 cm anti-aircraft gun also played a significant role in the legendary reputation of another weapon of the Second World War, which Boker has already used in a Damascus collector's knife. As the main armament, it was installed in the turret of the VI tank, better known as the Tiger. Proven through this use, it later also became the gun of the Nashorn (Rhino) tank destroyer.

The Eight-Eight (8-8) Flak Damascus project has been realised as a fulyl-fledged dagger with a medieval look. The centrepiece is the slender but massive 18.1 cm long blade forged from parts of the 8.8 cm Flak. The handle scroll is turned from a piece of domestically stabilised hornbeam with 16 jimpings. On closer inspection, the radii and proportions of the 5 mm thick stainless steel parrying piece discreetly form the outline of the cross-guard with side extensions folded up for transport. The silhouette of the folded-out mount is indicated on the base of the solid stainless steel end knob. The dagger is fitted with a dark brown leather sheath with a belt loop and localised reinforcement. Supplied with an elegant storage box, certificate of authenticity and a individual serial number.

Specifications:

Steel: Damascus (see description)
Blade length: 7.204“ inch / 183 mm 
Total length: 12.598” inch / 320 mm
Handle length: 5.393" inch / 137 mm
Handle scales: Iron Wood

Blade Thickness: 6.1 mm
Overall weight 292 gr.

Cudeman 107-C Bowie Hunting Stag Knife

- Made by Cudeman in Spain -

Cudeman Hunting Bowie Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Mova 1.4116 X50CrMoV15 / Rockwell 54/56 HRC
Blade length: 7.874” inch / 200 mm
Total length: 12.992” inch /  330 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Polished Deer
Blade thickness: 5 mm
Knife weight 406 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 113 gr.

– Fixation of the Handle: Oval-Head Rivets

– Blade shape: Bowie

– Grind: Hollow Grind

– Finger Guard: 420 Polished Stainless Steel

– Blade Finish: Satin Finish

– Hole for Safety Cord

Cudeman 107-M Bowie Hunting Knife

- Made by Cudeman in Spain -

Cudeman Hunting Bowie Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Mova 1.4116 X50CrMoV15 / Rockwell 54/56 HRC
Blade length: 7.874” inch / 200 mm
Total length: 12.992” inch /  330 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Black Micarta with Detailed Red Line
Blade thickness: 5 mm
Knife weight 434 gr.

Additional Information:

– Black Leather Sheath included

– Sheath Weight: 113 gr

– Fixation of the Handle: Oval-Head Rivets

– Blade shape: Bowie

– Grind: Hollow Grind

– Finger Guard: 420 Polished Stainless Steel

– Blade Finish: Satin Finish

– Hole for Safety Cord

Cudeman 107-R Bowie Hunting Knife

- Made by Cudeman in Spain -

Cudeman Hunting Bowie Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Mova 1.4116 X50CrMoV15 / Rockwell 54/56 HRC
Blade length: 7.874” inch / 200 mm
Total length: 12.992” inch /  330 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Polished Red Stamina
Blade thickness: 5 mm
Knife weight 406 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 113 gr.

– Fixation of the Handle: Oval-Head Rivets

– Blade shape: Bowie

– Grind: Hollow Grind

– Finger Guard: 420 Polished Stainless Steel

– Blade Finish: Satin Finish

– Hole for Safety Cord

Cudeman 117-L "APACHE" Hunting Knife

- Made by Cudeman in Spain -

Cudeman Hunting Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 7.677” inch / 195 mm
Total length: 12.992” inch /  330 mm
Handle length: 5.315” inch / 135 mm
Handle scales: Satin Olive Wood
Blade thickness: 5 mm
Knife weight 354 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 113 gr.

– Fixation of the Handle : Flat Head Rivets

– Blade shape: Drop-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

Cudeman 208-G Opus Hunting Nesmuk Knife

- Made by Cudeman in Spain -

Cudeman Hunting Nesmuk Knife with Böhler blade.

Leather Sheath included.

Specifications:

Steel: BÖHLER N-695 59/61 HRC
Blade length: 8.071” inch / 205 mm
Total length: 8.661” inch /  220 mm
Handle length: 4.528” inch / 115 mm
Handle scales: Polished Turkish Walnut with Detailed Red Line
Blade thickness: 4 mm
Knife weight 140 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 113 gr.

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Nesmuk

– Grind: Flat Grind

– Blade Finish: Satin Finish

– Hole for Safety Cord

– Multi-Positioning Sheath

Cudeman 208-GC Opus Hunting Ness Wolf Knife

- Made by Cudeman in Spain -

Cudeman Hunting Nesmuk Knife with Böhler blade.

Luxury leather sheath included.

Specifications:

Steel: BÖHLER N-695 59/61 HRC
Blade length: 8.071” inch / 205 mm
Total length: 8.661” inch /  220 mm
Handle length: 4.528” inch / 115 mm
Handle scales: Polished Turkish Walnut with Detailed Red Line
Blade thickness: 4 mm
Knife weight 140 gr.

Additional Information:

– Brown Luxury Leather Sheath included

– Sheath Weight: 260 gr.

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Nesmuk

– Grind: Flat Grind

– Blade Finish: Satin Finish

– Hole for Safety Cord

– Multi-Positioning Sheath

Luxury leather sheath details:

- Complete brown leather adapter (644-C) including:
- Sharpening stone
- Signal mirror
- Sundial
- Flint Stone
- Brown paracord (2.80 m)

Cudeman 208-L Opus Hunting Ness Wolf Knife

- Made by Cudeman in Spain -

Cudeman Hunting Nesmuk Knife with Böhler blade.

Leather Sheath included.

Specifications:

Steel: BÖHLER N-695 59/61 HRC
Blade length: 8.071” inch / 205 mm
Total length: 8.661” inch /  220 mm
Handle length: 4.528” inch / 115 mm
Handle scales: Satin Olive Wood
Blade thickness: 4 mm
Knife weight 140 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 113 gr.

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Nesmuk

– Grind: Flat Grind

– Blade Finish: Satin Finish

– Hole for Safety Cord

– Multi-Positioning Sheath

Cudeman 208-LC Opus Hunting Ness Wolf Knife

- Made by Cudeman in Spain -

Cudeman Hunting Nesmuk Knife with Böhler blade.

Leather Sheath included.

Specifications:

Steel: BÖHLER N-695 59/61 HRC
Blade length: 8.071” inch / 205 mm
Total length: 8.661” inch /  220 mm
Handle length: 4.528” inch / 115 mm
Handle scales: Satin Olive Wood
Blade thickness: 4 mm
Knife weight 140 gr.

Additional Information:

– Brown Luxury Leather Sheath included

– Sheath Weight: 260 gr.

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Nesmuk

– Grind: Flat Grind

– Blade Finish: Satin Finish

– Hole for Safety Cord

– Multi-Positioning Sheath

Luxury leather sheath datails:

- Complete brown leather adapter (644-C) including:
- Sharpening stone
- Signal mirror
- Sundial
- Flint Stone
- Brown paracord (2.80 m)

Cudeman 208-M Opus Hunting Ness Wolf Knife

- Made by Cudeman in Spain -

Cudeman Hunting Nesmuk Knife with Böhler blade.

Leather Sheath included.

Specifications:

Steel: BÖHLER N-695 59/61 HRC
Blade length: 8.071” inch / 205 mm
Total length: 8.661” inch /  220 mm
Handle length: 4.528” inch / 115 mm
Handle scales: Black Micarta with Detailed Red Line
Blade thickness: 4 mm
Knife weight 140 gr.

Additional Information:

– Black Leather Sheath included

– Sheath Weight: 113 gr.

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Nesmuk

– Grind: Flat Grind

– Blade Finish: Satin Finish

– Hole for Safety Cord

– Multi-Positioning Sheath

Cudeman 208-MC Opus Hunting Ness Wolf Knife

- Made by Cudeman in Spain -

Cudeman Hunting Nesmuk Knife with Böhler blade.

Leather Sheath included.

Specifications:

Steel: BÖHLER N-695 59/61 HRC
Blade length: 8.071” inch / 205 mm
Total length: 8.661” inch /  220 mm
Handle length: 4.528” inch / 115 mm
Handle scales: Black Micarta with Detailed Red Line
Blade thickness: 4 mm
Knife weight 140 gr.

Additional Information:

– Brown Luxury Leather Sheath included

– Sheath Weight: 260 gr.

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Nesmuk

– Grind: Flat Grind

– Blade Finish: Satin Finish

– Hole for Safety Cord

– Multi-Positioning Sheath

Luxury leather sheath details:

- Complete brown leather adapter (644-C) including:
- Sharpening stone
- Signal mirror
- Sundial
- Flint Stone
- Brown paracord (2.80 m)

FOX FKMD Oplita FX-017116 Military Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

Introduction:

Sheath NYLON 1000D with MOLLE system and FRN (NYLON reinforced fiberglass) plate with wire cutting plate and sharpening stone.

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 7.28" inch / 185 mm
Total length: 12.20” inch / 310 mm
Handle length: 4.92” inch / 125 mm
Handle scales: Coyote tan Kraton G 

Blade thickness: 5 mm
Overall weight 285 gr.

Additional Information:

Blade Coating: Coyote tan Idroglider

Blade: Partially Serrated Blade

Blade: Wire Cutting Plate

Sheath: NYLON 1000D with MOLLE system and FRN ®(NYLON reinforced fiberglass) with stainless steel wire cutting plate and sharpening stone

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.

FOX Oplita FX-0171117 Military Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

Introduction:

Sheath NYLON 1000D with MOLLE system and FRN (NYLON reinforced fiberglass) plate with wire cutting plate and sharpening stone.

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 7.28" inch / 185 mm
Total length: 12.20” inch / 310 mm
Handle length: 4.92” inch / 125 mm
Handle scales: Black Kraton G  

Blade thickness: 5 mm
Overall weight 285 gr.

Additional Information:

Blade Coating: Black Idroglider

Blade: Partially Serrated Blade

Blade: Wire Cutting Plate

Sheath: NYLON 1000D with MOLLE system and FRN ®(NYLON reinforced fiberglass) with stainless steel wire cutting plate and sharpening stone

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.

Muela BW-22 Bowie Hunting Knife

- Handcrafted by Muela in Spain -

Introduction:

The Muela BW-22 bowie knife presents itself as a smooth operator. The brass guard element ensures secure handling, and the satin-finished 1.4116 stainless steel hollow-ground blade is reminiscent of the traditional Bowie shape. Leather sheath is included.

Specifications:

Steel: 1.4116 Stainless Steel = “MOVA”  (X50CrMoV15) Rockwell 56-58 HRC
Blade length: 8.661” inch / 220 mm 
Total length: 13.582” inch /  345 mm
Handle length: 4.921" inch / 125 mm
Handle: Coral Pakka Wood

Knife weight: 365 gr.

Blade thickness: 4.5 mm

Steel quality informations 1.4116:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosion resistant.

Muela BW-22N Bowie Hunting Knife Set

- Handcrafted by Muela in Spain -

Introduction:

Muela BW-22N Knife Set. A wonderful Muela knife set containing a Muela Bowie knife and a Muela pocket knife (10-M). Both superb knives has brass fittings. The high-quality leather sheath suitable for these two Muela knives belongs to this impressive knife set. 

Specifications:

1.) Bowie knife:

Steel: 1.4116 Stainless Steel = “MOVA”  (X50CrMoV15) Rockwell 56-58 HRC
Blade length: 8.661” inch / 220 mm 
Total length: 13.582” inch /  345 mm
Handle length: 4.921" inch / 125 mm
Handle: Coral Pakka Wood

Knife weight: 465 gr.

Blade thickness: 4 mm

2.) Muela 10-M Folding knife

Steel: 1.4116 Stainless Steel = “MOVA”  (X50CrMoV15) Rockwell 56-58 HRC

Blade length: 4.133” inch / 105 mm 
Total length: 9.055” inch /  230 mm
Handle length: 4.921" inch / 125 mm
Handle: Coral Pakka Wood

Back-Lock system

Knife weight: 210 gr.

Blade thickness: 2.5 mm

Steel quality informations 1.4116:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosion resistant.

Muela BW-22P Bowie Hunting Knife Set

- Handcrafted by Muela in Spain -

Introduction:

A wonderful Muela knife set containing a Muela Large Bowie knife and a Muela Small Bowie knife (BW-10). Both superb knives has brass fittings. The high-quality leather sheath suitable for these two Muela knives belongs to this impressive knife set. 

Specifications:

1.) Bowie knife:

Steel: 1.4116 Stainless Steel = “MOVA”  (X50CrMoV15) Rockwell 56-58 HRC
Blade length: 8.661” inch / 220 mm 
Total length: 13.582” inch /  345 mm
Handle length: 4.921" inch / 125 mm
Handle: Coral Pakka Wood

Knife weight: 465 gr.

Blade thickness: 4,5 mm

2.) Muela BW-10 Bowie knife

Steel: 1.4116 Stainless Steel = “MOVA”  (X50CrMoV15) Rockwell 56-58 HRC

Blade length: 3.937” inch / 100 mm 
Total length: 7.677” inch /  195mm
Handle length: 3.740" inch / 95 mm
Handle: Coral Pakka Wood

Back-Lock system

Knife weight: 125 gr.

Blade thickness: 3.5 mm

Steel quality informations 1.4116:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosion resistant.

Muela CARIBU Pig Sticker Hunting Dagger

- Handcrafted by Muela in Spain -

Introduction:

This is the Muela Caribu dagger pig sticker. Muela uses only the finest materials to produce their high quality knives. This beautful dagger is supplied with finest Coral Pakka Wood handle. The steel has a Rockwell hardness of 56-58 HRC. The pommel and the guard are made from polished brass. A high quality brown leather is included and belongs to this beautiful knife.

Specifications:

Steel: 1.4116 Stainless Steel = “MOVA”  (X50CrMoV15)
Blade length: 8.0708” inch / 205 mm 
Total length: 12.992” inch /  330 mm
Handle length: 4.921” inch / 125 mm
Handle: Coral Pakka Wood

Blade thickness: 4.5 mm

Knife weight: 390 gr.

Steel quality informations 1.4116:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosion resistant.

Muela Caribu-G Pig Sticker Hunting Dagger

- Handcrafted by Muela in Spain -

Introduction:

This is the Muela Caribu dagger pig sticker. Muela uses only the finest materials to produce their high quality knives. This beautful dagger has a slip resistant rubber handle. A high quality brown leather sheath is included and belongs to this beautiful knife.

Specifications:

Steel: 1.4116 Stainless Steel = “MOVA”  (X50CrMoV15)
Blade length: 8.661” inch / 220 mm
Total length: 13.188” inch /  335 mm
Handle length: 4.527” inch / 115 mm
Handle: Slip resistant rubber handle

Blade thickness: 4,5 mm

Knife weight: 343 gr.

Steel quality informations 1.4116:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosion resistant.

Muela CHEVREUIL-22R Dagger Hunting Knife

- Handcrafted by Muela in Spain -

Introduction:

Muela CHEVREUIL-22R dagger with finest Coral Pakka Wood handle. The brass guard element ensures secure handling, The high-quality leather sheath is included with this beautiful hunting knife. 

Specifications:

Steel: 1.4116 Molybden-Vanadium stainless steel / HRC 56-58
Blade length: 8.661” inch / 220 mm 
Total length: 13.118” inch /  335 mm
Handle length: 4.527" inch / 115 mm
Handle: Coral Pakka Wood

Blade thickness: 4.5 mm

Knife Weight: 270 gr.

Muela CHEVREUIL-22S Dagger Hunting Knife

- Handcrafted by Muela in Spain -

Introduction:

Muela CHEVREUIL-22S dagger with finest crown stag handle and stainless steel guard. The high-quality leather sheath is included with this beautiful hunting knife. 

Specifications:

Steel: 1.4116 Molybden-Vanadium stainless steel / HRC 56-58
Blade length: 8.661” inch / 220 mm 
Total length: 13.118” inch /  335 mm
Handle length: 4.527" inch / 115 mm
Handle: Crown Stag

Blade thickness: 4.5 mm

Knife Weight: 280 gr.

Muela Gaucho-20A Hunting Knife

- Handcrafted by Muela in Spain –

Introduction:

Muela Gaucho-20A hunting knife, is a very good companion on hunt. Muela used the finest materials for this beautiful hunting knife. This awesome hunting knife comes with high quality leather sheath. 

Specifications:

Steel: Mova 1.4116 (X50CrMoV15) Rockwell HRC 56°-58°
Blade length: 7.874" inch / 200 mm
Total length: 12.795” inch /  325 mm
Handle length: 4.921” inch / 125 mm
Handle: Staghorn

Knife weight: 185 gr.

Black thickness: 4.5 mm

Leather Sheath included.

Additional informations about the steel quality:

“MOVA” 1.4116 (X50CrMoV15). It´s a classic steel in our Knives and folding Knives. An excellent combination of Molybdenum and Vanadium that is highly stain resistant, though and corrosion resistant.

Muela Gaucho-20CO Hunting Knife

- Handcrafted by Muela in Spain –

Introduction:

Muela Gaucho-20CO hunting knife, is a very good companion on hunt. Muela used the finest materials for this beautiful hunting knife. This awesome hunting knife comes with high quality leather sheath. 

Specifications:

Steel: Mova 1.4116 (X50CrMoV15) Rockwell HRC 56°-58°
Blade length: 7.874" inch / 200 mm
Total length: 12.795” inch /  325 mm
Handle length: 4.921” inch / 125 mm
Handle: Cocobola Wood

Knife weight: 190 gr.

Black thickness: 4.5 mm

Leather Sheath included.

Additional informations about the steel quality:

“MOVA” 1.4116 (X50CrMoV15). It´s a classic steel in our Knives and folding Knives. An excellent combination of Molybdenum and Vanadium that is highly stain resistant, though and corrosion resistant.

Muela Gaucho-20M Hunting Knife

- Handcrafted by Muela in Spain –

Introduction:

Muela Gaucho-20M hunting knife, is a very good companion on hunt. Muela used the finest materials for this beautiful hunting knife. This awesome hunting comes with high quality leather sheath. 

Specifications:

Steel: Mova 1.4116 (X50CrMoV15) Rockwell HRC 56°-58°
Blade length: 7.874" inch / 200 mm
Total length: 12.795” inch /  325 mm
Handle length: 4.921” inch / 125 mm
Handle: Black Micarta

Knife weight: 190 gr.

Black thickness: 4.5 mm

Leather Sheath included.

Additional informations about the steel quality:

“MOVA” 1.4116 (X50CrMoV15). It´s a classic steel in our Knives and folding Knives. An excellent combination of Molybdenum and Vanadium that is highly stain resistant, though and corrosion resistant.

Muela Gaucho-20S Hunting Knife

- Handcrafted by Muela in Spain –

Introduction:

Muela Gaucho-20S hunting knife, is a very good companion on hunt. Muela used the finest materials for this beautiful hunting knife. This awesome hunting knife comes with high quality leather sheath. 

Specifications:

Steel: Mova 1.4116 (X50CrMoV15) Rockwell HRC 57°-58°
Blade length: 7.874" inch / 200 mm
Total length: 12.992” inch /  330 mm
Handle length: 5.118” inch / 130 mm
Handle: Crown Stag with nice emblem

Knife weight: 190 gr.

Leather Sheath included.

Additional informations about the steel quality:

“MOVA” 1.4116 (X50CrMoV15). It´s a classic steel in our Knives and folding Knives. An excellent combination of Molybdenum and Vanadium that is highly stain resistant, though and corrosión resistant.

Muela Jabali-21 OL Bushcraft Outdoor & Hunting Knife

- Handcrafted by Muela in Spain -

Introduction:

Muela Jabali bushcraft knife. In this wonderful full tang bushcraft knife you can see the attention to detail. Muela uses only the finest materials to produce their high quality knives. This is a tru giant knife, which is supplied with finest Olive Wood handle. The steel has a Rockwell hardness of 57-58 HRC. A high quality brown leather is included and belongs to this beautiful knife.

Specifications:

Steel: 1.4116 Stainless Steel = “MOVA”  (X50CrMoV15)
Blade length: 8.267” inch / 210mm
Total length: 13.385” inch /  340 mm
Handle length: 5.118” inch / 130 mm
Handle: Olive Wood

Knife weight: 380 gr.

Steel quality informations 1.4116:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosion resistant.