55mm - 80mm

Böker Solingen Damascus Full Tang Knife "Barlow BFF"

- Made in Solingen / Germany -

Introduction:

The Boker Barlow BFF designed by Lucas Burnley as a fixed EDC in full tang construction is, as expected, a complete success and has delighted a large number of users all over the world since its market launch. With this handy knife, the renowned designer and full-time knifemaker from the USA bridges the gap between the historical roots of the tried-and-tested Barlow and the modern elements of its line design known as Post Tactical. In this fixed version, tradition, everyday utility and a touch of tactical finesse find harmonious harmony.

After the original model with walnut wood and a heavy duty variant with Micarta scales, a premium version was missing from our range until now. With the Boker Barlow Fixed Damascus, the entire blade blank is made of STAINLESS DAMASCUS by Chad Nichols, forged in the Coil Belt pattern.

The Damascusblade with 150 layers develops an irresistible and archaic appeal in combination with the scales made of up to 5,000-year-old bog oak. The decorative hollow copper stud also serves as a catch strap eyelet and, together with the studs of the same colour, adds a visual accent. Supplied with a precisely fitting black leather sheath, which ensures a high level of carrying comfort with the help of the integrated Clip. Handmade in the Boker Knife Manufactory in Solingen.

Steel: Stainless Damascus
Blade length: 2.559“ inch / 70 mm
Total length: 5.905” inch / 153 mm
Handle length: 3.346” inch / 83 mm
Handle scales: Bog Oak Wood

Blade thickness: 2,5 mm
Overall weight 62 gr.

Boker Barlow Leopard Damascus Folding Knife

Collector's knife *Serial numbered*

- Made in Solingen / Germany -

Introduction:

The handy Boker Barlow is an absolute classic in our range and as a lightweight slip-joint pocket knife it handles almost all everyday cutting jobs effortlessly. This particularly noble collector's version is equipped with a blade made of Leopard-Damascus, which is opened by nail-nick. The legendary blade steel by Boker, which has been inspiring the knife scene worldwide for many years, is made of the gun barrel steel of the Leopard main battle tank. It consists of 300 layers and has a hardness of 61 to 63 HRC.

The pocket knife with its integral construction is equipped with a contoured handle body made of olive green Canvas Micarta, which is milled from the solid and also forms the characteristic bolsters of the Barlow. The lightweight construction can thus completely dispense with additional metal liners. Thanks to the likewise contoured handle scales made of certified imported desert-ironwood, this noble gentleman's knife is extremely comfortable to hold. With high-quality felt case for storage, certificate of authenticity and individual serial number. Handmade in the Boker Knife Manufactory in Solingen.

Specifications:

Steel: Damascus 
Blade length: 2.637“ inch / 67 mm 
Total length: 5.984” inch / 152 mm
Handle length: 3.346” inch / 85 mm
Handle scales: Desert Ironwood / Micarta

Blade thickness: 2 mm
Overall weight 30 gr.

Böker Solingen "Boxer" Desert Ironwood Folding Knife

- Made in Solingen / Germany -

Introduction:

Raphaël Durand of Thiers is one of the most sought-after custom knifemakers in France. His handmade pieces fetch premium prices all over the world and his order book is always full. All the more reason for us to be happy to follow the Slack by Boker Plus with one of his most popular models, the Boxer, now available from our Solingen Manufactory. The classic backlock combines Mediterranean influences of the blade shape with elements of a traditional pocketknife - an intriguing combination with a unique flair. The blade consists of N690 with a fine satin finish. The stainless steel bolsters sport Raphaël Durand's signature groove. The scales consist of exquisite and durable certified imported Desert ironwood. The handy size is the perfect compromise between pocket dimensions and versatile functionality, which makes the Boxer a true all-rounder and a sure favorite of fans of unique pocket knives.

Specifications:

Steel: N690
Blade length: 2.952“ inch / 75 mm
Total length: 7.204” inch / 183 mm
Handle length: 4.251” inch / 108 mm
Handle scales: Desert Ironwood

Blade thickness: 2.9 mm
Overall weight 122 gr.

Additional steel informations:

The cobalt-alloyed N690 by Böhler (not to be confused with the lower-grade N695!) is a very reliable upper middle-grade steel we use at our Solingen manufacture for a wide variety of projects. The fine-grained N690, which ranks above 440C, offers convincing performance data in all areas. It is often sold as N690Co – the "Co" stands for cobalt and describes the exact same steel.

German Böker  Camaro 1969 Z28 Damascus knife

- Made in Solingen / Germany -

Introduction:

Legends are not born; they are shaped by time until their moment to shape time has come. They don't live a myth, they create it and leave behind a venerable legacy. In 1966, the foundation stone for another icon was laid in Detroit, Michigan. In the epicentre of the US automotive industry, numerous vehicles see the light of day. Many of them are ordinary cars, while others are exclusively chosen. The Chevrolet Camaro was originally designed as a so-called Pony Car, which was intended to appeal primarily to younger buyer groups. Compact, sporty and affordable - the coupé was the stalwart for the semi-strong. Success was not long in coming. From 1966 to 1969, approximately 700,000 Camaro models with 12 different engine variants rolled off the production line. In 1969, the last Camaro of the first generation, the Z28, was introduced. Connoisseurs consider this model to be one of the best of all series. A massive V8 small block engine with 216 kW (290 hp) and a Special Performance Package propelled the Camaro Z28 into the select league of muscle cars, sporty stripes on the body included. The motorsport DNA of the now coveted collector's item cannot be denied either. The engine used is a toned-down version of the successful and highly decorated Penske Camaro from the SCAA Trans AM racing series.

Boker quotes the design of the Camaro Z28 and revives the legend. The result is more than just a knife. An attitude to life, the dignified road trip with the bubbling sound of the V8 engine on the seemingly endless highway, gentle rays of sunlight streaking across the canyon and warming the soul. Unforgettable moments without everyday life - just like the extraordinary Boker 1969 Z28- Damascus. In collaboration with the Italian designer Tommaso Rumici, a unique "muscle knife" was created that combines the distinctive character traits of the Camaro Z28 in form and strength. The elegant Damascus drop-point blade, hand-forged by Chad Nichols with 80 layers in the “Tread” pattern, reminisces of the sloping cowl induction bonnet of the muscle car. For this purpose, parts of the upper A-arm from the Camaro were used for the blade, that opens smoothly with the blue thumb stud, while the biting stainless steel linerlock reliably locks the knife in place. Based on a colour analysis of an original model, the finely tuned lacquer finish in "Le Mans Blue" was created especially for Boker for the aluminium handle, which interprets the lines of the body in a nostalgic way and comes up with exciting details. The notchback, the small rear spoiler and the gill-like air intakes on the rear wings have been beautifully integrated into the knife. The blade axle screw is lovingly inspired by the rims often used on muscle cars, whereas the straight-lined stainless steel clip, milled from the solid, is reminiscent of the chrome-plated door handles. Delivery includes a high-quality floating display, plenty of torque and a gentle breeze in your hair. Handmade in the Boker Manufactory in Solingen.

Specifications:

Steel: Damascus
Blade length: 3.149“ inch / 80 mm 
Total length: 7.322” inch / 186 mm
Handle length: 4.173” inch / 106 mm
Handle scales: Aluminum

Designer: Tommaso Rumici

Blade thickness: 3.63 mm
Overall weight 99 gr.

Fallkniven GPs Gentleman's Folding Pocket Knife

- Made by Fällkniven -

Introduction:

Gentleman’s Pocket Knife appears to be a traditional, slightly old-fashioned pocket knife but if you look at it closely you will find nothing but modern materials and hi-tech solutions. We asked some professional hunters to look at a handmade sample of the GP, and their spontaneous review was: This is how a folding knife for hunting purposes should look like! Aside from personal preferences, we guess that many people will like the steel of this knife, our  laminated cobalt steel is unlikely sharp.

Other benefits include the reliable blade lock. A properly built liner-lock system is, in our opinion, the world’s strongest blade lock while still being easy to deal with. This technical solution also means that the knife is easy to clean. Rinse it under running warm water and let it dry for achieving best hygiene and function. As the strong blade bolt is threaded, you can adjust the blade inertia to suit your personal taste. The blade joint does not require lubrication. Oil and grease rather attract dust and dirt and this will increase rather than reduce wear.

It’s crazy beautiful, real stag for handle material, but it’s also very hard to get enough many nice looking pieces, which also are legitimate to buy and manufacture. This staghorn comes from a legal source of Sambar deer stag. Staghorn, as everyone knows, is a natural material that moves – it shrinks and swells due to humidity. In addition, when horn ages, it shrinks slightly, and there is not much to do about it. This means that small stress cracks around bolts and ends are already visible on the folding knives or will occur later on. This is not covered by any guarantee! This means that you can always return a knife and request the money back (for the knife) but it cannot be warranty repaired or replaced by another sample. Or as they state on an auction – sold in the existing condition!

If you already know the characteristics of the horn, you can look forward to a really nice sample with well-matched staghorn sides, AAA quality in terms of patterns. Unfortunately, we could not mount the traditional bracket, it simply didn’t fit on this special. Suede pouch included.

Please note:

There can be some variation in pattern and shades on the handles.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 3.07" inch / 78 mm
Total length: 7.09” inch / 180 mm
Handle length: 3.93” inch / 100 mm
Handle scales: Stag

Blade thickness: 3 mm
Knife weight 96 gr.

Additional Information:

Edge: Flat Ground

Pouch Included: Suede

Locking: Liner Lock

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven P3Gcfc Carbon Fiber Folding Pocket Knife

- Made by Fällkniven -

Introduction:

A lot has happened behind the scenes around this folding knife, but the aim has always been the same – to produce a folding knife with a sensible size and attractive design. Since we have sold folding knives for a long time we wanted to use that experience and make a knife that was practical, attractive and reliable. The P folder was born. From start with a blade in solid VG10, nowadays with a blade in laminated powder steel, our famous 3G stainless steel. The P folder is easy to clean since the back of the handle is open, something that makes it very suitable for hunting purposes. All models come with a black cordura sheath, which attaches to the belt.

In general, a folding knife can never be as strong as a sheath knife, and since it is the result of several hundred different work operations, it must of course be more expensive to manufacture. On the other hand it is a handy format and acceptable in many situations.Inspired by the world famous knifemaker R.W. Loveless, mod. P is a symbiosis between advanced technology, genuine handicraft and timeless design – a knife for the modern hunter. Today available with a handle in desert ironwood or hi-tech carbon fiber. Cordura sheath included.

Please note:

There can be some variation in pattern and shades on the wooden handles.

Specifications:

Steel: 3G HRC 62
Blade length: 3.03" inch / 77 mm
Total length: 7.09” inch / 180 mm
Handle length: 4.06” inch / 103 mm
Handle scales: Carbon Fiber

Blade thickness: 3 mm
Knife weight 75 gr.

Additional Information:

Edge: Flat Ground

Sheath Included: Cordura

Locking: Liner Lock

Fallkniven TK3ic Folding Knife

- Made by Fällkniven -

Introduction:

Elegant, modern folding knives
The folding knives in the Tre Kronor series are lightweight, safe and beautiful. The new edge steel, 3G, is a revolutionary laminated anticorrosive steel, with a core comprising the well-proven powder steel Super Gold Powder Steel (SGPS) and sides of VG2.

The size of the folding knives is adapted for active everyday use; and if a larger or stronger knife is needed, we recommend either of our sheath knives TK1 or TK2.

Tre Kronor #3
The beautiful enduring design is the result of a long refinement process focusing on the functional concept of the folding knife. TK3 is a secure, solid folding knife, whose blade, in our new 3G steel, represents the best on the market today. The blade locks in its open position with a well-proven locking mechanism. Every folding knife is manufactured by hand, which should and does mean small variations. Many different versions of this model are planned for the future.

Please note:

There can be some variation in pattern and shades on the wooden handles.

Specifications:

Steel: 3G HRC 62
Blade length: 2.76" inch / 70 mm
Total length: 6.50” inch / 165 mm
Handle length: 3.746” inch / 95 mm
Handle scales: Desert Ironwood

Blade thickness: 2.5 mm
Knife weight 100 gr.

Additional Information:

Edge: Flat Ground

Handle: Lanyard Hole

Locking: Lock-Back

Muela "Bowie BW-6DAM" Damascus Collectors Hunting Knife

- Handcrafted by Muela in Spain -

Introduction:

Here we offer a beautiful Bowie Damascus Stag knife hand made by "Muela" in Spain. This very sturdy knife is supplied with finest Stag Horn scales.The handle was decorated with beautiful rosewood in addition to the stag. The pommel is made of polished Nickel Silver. The stainless Damascus steel blade shows a beautiful damascus pattern, which is rarely found in this combination. The Damascus blade has 130 layers of stainless Damascus (57-62 HRC). You will find further information about this very high quality damascus steel down in this knife description. This awesome Muela collector's knife comes with a certificate and a nice gift box.

Specifications:

Steel: Damascus Stainless Steel (RWL34 & PMC27)
Blade length: 2.952” inch / 75 mm
Total length: 6.692” inch /  170 mm
Handle length: 3.740” inch / 95 mm
Handle scales: Stag Horn

Knife weight: 65 gr.

Blade thickness: 4 mm

Additional Informations about the steel quality:

The “Stainless Damascus Steel” it´s compound about 130 layers although it can range between 90 and 130 depending on the thickness and production. Using two kind of rapidly solidified powder steels (RWL34-PMC27) welded at a temperature of 1150ºC and at a gas pressure of about 1.000 atmospheres, we get a material hard, durable, heat resistant and the fracture strength thereby increased radically.

Muela "Muela Colibri COL-7DAM" Damascus Hunting Knife

- Handcrafted by Muela in Spain –

Introduction:

Here we offer a fantastic Damascus Full Tang Stag knife hand made by "Muela" in Spain. This very sturdy knife is supplied with finest Stag Horn scales. The beautiful Stag handle has a lanyard hole for safety cord. The bolsters are made of high gloss polished nickel-silver. The stainless Damascus steel blade shows a beautiful damascus pattern, which is rarely found in this combination. The Damascus blade has 130 layers of stainless Damascus (57-62 HRC). You will find further information about this very high quality damask steel down in this knife description. This beautiful Muela collector's knife comes with a certificate and a nice gift box.

Specifications:

Steel: Damascus Stainless Steel (RWL34 & PMC27)
Blade length: 2.755” inch / 70 mm
Total length: 6.102” inch /  155 mm
Handle length: 3.346” inch / 85 mm
Handle scales: Stag Horn

Knife weight: 85 gr.

Blade thickness: 4 mm

Additional Informations about the steel quality:

The “Stainless Damascus Steel” it´s compound about 130 layers although it can range between 90 and 130 depending on the thickness and production. Using two kind of rapidly solidified powder steels (RWL34-PMC27) welded at a temperature of 1150ºC and at a gas pressure of about 1.000 atmospheres, we get a material hard, durable, heat resistant and the fracture strength thereby increased radically.

German PUMA Jagdmesser III. Hunting Folding Knife

- Made in Solingen / Germany -

Pre-order available:

Deliverable from 30th April 2025

Introduction:

The Puma Custom has all the features of a traditional pocket knife. This version now equiped with a bone saw & gutting blade. A cap lifter is integrated into the bonesaw. A classic back lock ensures safe handling.

Specifications:

Steel: 440A / 55-57 HRC
Blade length: 2.992” inch / 76 mm
Bonesaw length: 2.953” inch / 75 mm

Total length: 6.693” inch / 170 mm
Handle length: 3.701” inch / 94 mm
Handle scales: Staghorn with engraving plate made of nickel silver
Blade thickness: 3 mm
Bonesaw thickness: 2 mm

Overall weight 162 gr.

Additional Information:

– Nickel Silver Bolster

– Back Lock

– Cap Lifter

– Double-toothed bonesaw