81mm - 100mm

Böker Solingen Davis Classic Hunter Micarta Pocket Knife

- Made in Solingen / Germany -

Introduction:

The Boker Davis Classic Hunter inspires with its traditional Droppoint blade, whose shape has proven itself in hunting and outdoor for decades. The design of the American knifemaker W.C. Davis from Missouri is equipped with green Micarta scales and stainless steel bolsters, thus offering excellent grip even in wet conditions. Red fibre layers provide an attractive contrast to the brushed steel and the intermediate piece is also made of Micarta.
The blade is made of the high-quality N690 and therefore leaves nothing to be desired in terms of durability. It is secured by a stable backlock. The slim design makes the knife particularly attractive. The handle thickness is just 11 millimetres above the bolsters and about 14 millimetres at the thickest point of the contoured scales. Despite its ergonomic design, the knife is hardly noticeable in the pocket. With lanyard hole.

Specifications:

Steel: N690
Blade length: 3.464“ inch / 88 mm
Total length: 8.503” inch / 216 mm
Handle length: 5.039” inch / 128 mm
Handle scales: Micarta (dark green)

Blade thickness: 3.7 mm
Overall weight 150 gr.

German Böker "Optima Thuja Wood" Pocket Folding Knife

- Made in Solingen / Germany -

Introduction:

The Boker Optima is a pocket knife that can take rough handling and use. The exceptionally thick blade made of 440C is stainless, hollow ground and securely fastened by the Backlock. The blades of the Optima series are all exchangeable, so that the knife can be quickly adapted to the respective requirements. The exchange-blade system transforms this one-part knife into a multi-functional knife. The handle body is sintered from a piece of Nickel Silver, the scales are made from exotic certified imported Thuja Wood.

Specifications:

Steel: 440C
Blade length: 3.543“ inch / 90 mm
Total length: 8.385” inch / 213 mm
Handle length: 4.842" inch / 123 mm
Handle scales: Thuja Wood / Nickel Silver

Blade Thickness: 4 mm
Overall weight 220 gr.

German Böker "Optima Rose Wood" Pocket Folding Knife

- Made in Solingen / Germany -

Introduction:

The Boker Optima is a pocket knife that can take rough handling and use. The exceptionally thick blade made of 440C is stainless, hollow ground and securely fastened by the Backlock. The blades of the Optima series are all exchangeable, so that the knife can be quickly adapted to the respective requirements. The exchange-blade system transforms this one-part knife into a multi-functional knife. The handle body is sintered from a piece of Nickel Silver, the scales are made from exotic certified imported Rose Wood.

Specifications:

Steel: 440C
Blade length: 3.543“ inch / 90 mm
Total length: 8.385” inch / 213 mm
Handle length: 4.842" inch / 123 mm
Handle scales: Rose Wood / Nickel Silver

Blade Thickness: 4 mm
Overall weight 220 gr.

Böker Solingen "1906" Ebony Pocket Folding Knife

- Made in Solingen / Germany -

Introduction:

Some things are very much en vogue for a while before falling back into obscurity - usually well deserved. Yet others are much too beautiful, too precious to remain lost forever. The classic Boker 1906 is such a case. The design is more than a hundred years old, but its clear lines are still much loved today. Therefore, we spared no effort to bring the 1906 back to life. Neither old tools nor prototypes or design drawings existed, so we had to redesign the knife from scratch, guided by traditional methods throughout the whole production process.
The result is a charismatic pocket knife with a new lease of life, exuding fin de siècle charm – a very special piece mainly because of its clean lines and characteristic grind. Following the classic style, the plates are brass while the bolsters are nickel silver. The 440C blade is secured with a back spring. Certified imported Ebony handle scales add an elegant accent.

Specifications:

Steel: 440C
Blade length: 3.503" inch / 89 mm
Total length: 7.677” inch / 195 mm
Handle length: 4,173” inch / 106 mm
Handle scales: Ebony Wood

Blade thickness: 2.5 mm
Overall weight 79 gr.

Additional Informations about "Nickel Silver":

Nickel silver is the name of an alloy containing copper, nickel and zinc that has a silver-like look. In the knife industry, it is mainly used for fittings, especially for the so-called bolsters.

Fallkniven F1L Pilot Survival Knife

- Made by Fällkniven -

Introduction:

The Fallkniven F1 is the official survival knife Swedish Air Force pilots since 1995. A new world standard was set with the F1 through attention to important details including technical design, ergonomics and economy. The Fallkniven F1 surpasses international standards for strength, personal security capabilities, and value for money. The Fallkniven F1 represents a new philosophy with respect to knives for survival use. The F1 successfully combines the experience of generations of knife manufacturing with the most modern technology and forging. The well-thought-out design and incredibly tough laminated steel are only two of the many details making the handy-sized Fallkniven F1 a knife you can always you can rely on even with your life. The F1 is well proportioned and tremendously versatile. The safe, comfortable grip along with its hard and tough laminated steel blade makes the F1 knife incredibly useful for all types of daily work and demanding tasks. The full cover leather sheath is made from high-quality black leather, and it safely contains the entire knife.

Specifications:

Steel: Laminated VG10 HRC 59
Blade length: 3.82" inch / 97 mm
Total length: 8.27” inch / 210 mm
Handle length: 4.45” inch / 113 mm
Handle scales: Thermorun

Blade thickness: 4.5 mm
Knife weight 153 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade Finish: Satin

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven F1LCoS Hunting Knife

- Made by Fällkniven -

Introduction:

The Fällkniven F1LCoS is an excellent and thoroughly developed hunting knife, which meets all requirements. With this very high-quality hunting knife in the premium class, you fulfill the desire of a real Dream-Knife. Fällkniven has not spared any expense to produce this high-end product. A new type of steel alloy "Laminated CoS" was chosen for this very robust hunting knife. The shown leather sheath belongs to this beautiful hunting knife.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 3.82" inch / 97 mm
Total length: 8.27” inch / 210 mm
Handle length: 4.45” inch / 113 mm
Handle scales: Thermorun

Blade thickness: 4.5 mm
Knife weight 153 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade Finish: Satin

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven F1z Pilot Survival Knife

- Made by Fällkniven -

Introduction:

The Fallkniven F1 is the official survival knife Swedish Air Force pilots since 1995. A new world standard was set with the F1 through attention to important details including technical design, ergonomics and economy. The Fallkniven F1 surpasses international standards for strength, personal security capabilities, and value for money. The Fallkniven F1 represents a new philosophy with respect to knives for survival use. The F1 successfully combines the experience of generations of knife manufacturing with the most modern technology and forging. The well thought-out design and incredibly tough laminated steel are only two of the many details making the handy-sized Fallkniven F1 a knife you can always you can rely on even with your life. The F1 is well proportioned and tremendously versatile. The safe, comfortable grip along with its hard and tough laminated steel blade makes the F1 knife incredibly useful for all types of daily work and demanding tasks. The injection molded zytel sheath offers a simple, safe and strong combination of qualities that every user will appreciate. The one hand operated zytel sheath is easy to keep clean.

Specifications:

Steel: Laminated VG10 HRC 59
Blade length: 3.82" inch / 97 mm
Total length: 8.27” inch / 210 mm
Handle length: 4.45” inch / 113 mm
Handle scales: Thermorun

Blade thickness: 4.5 mm
Knife weight 153 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade Finish: Satin

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven F1zCoS Hunting Knife

- Made by Fällkniven -

Introduction:

The Fällkniven F1zCoS is an excellent and thoroughly developed hunting knife, which meets all requirements. With this very high-quality hunting knife in the premium class, you fulfill the desire of a real Dream-Knife. Fällkniven has not spared any expense to produce this high-end product.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 3.82" inch / 97 mm
Total length: 8.27” inch / 210 mm
Handle length: 4.45” inch / 113 mm
Handle scales: Thermorun

Blade thickness: 4,5 mm
Knife weight 153 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade Finish: Satin

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven H1z Elmax Bushcraft Hunting Knife

- Made by Fällkniven -

Introduction:

The Fallkniven H1 knife a very handy knife of impressive strength. The H1 is our first true hunting knife and is filled with the history of classic north Scandinavian knifemaking art. Due to this heritage the H1 lacks a standard finger guard, but grip safety is enhanced through its ergonomically shaped textured handle made of thermorun plastic.. Due to the grip shape and handle design, the H1 is for experienced hunters and outdoorsman due to the handle shape. you should be an experienced hunter or outdoorsman to ensure you who can safely use this classic yet advanced hunting knife.

Sheath
The blade cover for the H1 is an injection molded zytel sheath that offers a streamlined, safe and strong combination of qualities that should satisfy all users. The sheath can be operated with one hand operated, and is very easy to keep clean.

Steel
The blade is a solid blade made of powder steel, Elmax SuperClean from Uddeholm, Sweden. This means a stronger blade that keeps its sharpness significantly longer. After testing and using this steel for a number of years we can conclude that it is a very high performing and affordable steel. It has a very good balance between sharpness and strength, but is still relatively easy to sharpen. The hardness sits around 61-62 HRC, a hardness that we found ideal for this steel in terms of sharpness and strength.

Blade function
The special design of the H1 blade is for processing game when hunting. The H1 knife may look different but it works very well. In many respects the performance of a knife depends on the person actually holding the knife. Knowing where and how to place the correct incision into game is beyond the knife. Hunters need to avoid bad cuts, keep hair off the meat, prevent sliced organs, and minimize the blood flowing on the game and the hunter. The combination of a skilled hunter and a well-designed knife is unbeatable! The incisions are well placed, the game is kept clean, and no unnecessary cuts into the meat or organs.

Blade design
The Fallkniven H1 is what an optimal hunting knife looks like. We believe that the perfect hunting blade length is around four to five inches, not the small two-inch blades that are often sold to hunters. The H1 hunting knife is close in design to a professional butcher’s knife. Proper blade length must be combined with a blade shape that provides a long, effective skinning edge, and most importantly a tip that is shaped properly for penetration performance because a hunting knife must function well along the edge and at the tip. The tip of the H1 hunting knife is designed aid in skinning by penetrating the hide without cutting into the meat.

Trendsetter
The Fallkniven H1 hunting knife will quickly become your first choice for processing game and carrying on your hunting trips. Every feature of the H1 is matched for maximum capability in many hunting situations. From the sharp, strong and tough blade steel with a 0.2″ blade thickness, to the razor-sharp convex-ground blade, to the straight and ergonomic handle in thermorun rubber, to the extremely compact size, the H1 will serve the demanding needs of the experienced hunters and true outdoorsmen.

Specifications:

Steel: ELMAX / HRC 61-62
Blade length: 3.94" inch / 100 mm
Total length: 8.27” inch / 210 mm
Handle length: 4.33 inch / 110 mm
Handle scales: Thermorun

Blade thickness: 5 mm
Knife weight 174 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Tang: Protruding Broad Tang

Handle: Lanyard Hole

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven Kolt KKLz Hunting Knife

- Made by Fällkniven -

Introduction:

The Kolt Knife is probably Fallkniven´s best dry meat knife, no other knife is as good as the KK when it comes to cutting thin slices of a piece of dried or smoked meat. Of course, the knife can be used for a lot more and the simple reason is the handy size. In its original form the Kolt Knife had a very simple blade cover. However, many fans of the KK knife today were interested in a traditionally shaped leather sheath. We are now offering the KK frock knife with well-fitting sheath made of heavy black leather of the best quality. A small zytel edge cover is also included.

Specifications:

Steel: Laminated Cos HRC 60
Blade length: 3.35" inch / 85 mm
Total length: 7.28” inch / 185 mm
Handle length: 3.94 inch / 100 mm
Handle scales: Thermorun

Blade thickness: 3.85 mm
Knife weight 84 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather & Zytel Edge Cover

Tang: Broad Tang

Finger Guard: Stainless Steel

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven Taiga Hunter TH2z Hunting Knife

- Made by Fällkniven -

Introduction:

The Taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. What is special about these knives is the very secure plastic sheath where a specially designed locking system ensures that the knife is properly locked when it is placed in the sheath. It works regardless of weather and wind, sand, or snow.

Specifications:

Steel: Laminated Cos HRC 60
Blade length: 3.31" inch / 84 mm
Total length: 7.40” inch / 188 mm
Handle length: 4.09” inch / 104 mm
Handle scales: Thermorun

Blade thickness: 4.5 mm
Knife weight 116 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Finger Guard: Stainless Steel

Tang: Broad Tang

Laminated CoS: A newly developed high alloy cobalt-special steel

FOX Extreme Elite FX-121  Folding Knife

- Made by Fox Knives in Italy -

Design by: "Wilson Combat".

Introduction:

Wilson Combat is a leader in fine custom firearms and accessories since 1977.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.35" inch / 85 mm
Total length: 7.48” inch / 190 mm
Handle length: 4.13” inch / 105 mm
Handle scales: Cocobolo wood / G10 black / G10 multicolor

Blade thickness: 3 mm
Overall weight 110 gr.

Additional Information:

Blade Coating: satin / Physical Vapor Deposition (PVD)

Handle: Hole for Safety Cord

Clip: stainless steel 420J2B - reversible

Sheath: Included

 

PVD
(Physical Vapor Deposition) is a variety of vacuum deposition methods used to deposit thin films by the condensation of a vaporized form of the desired film material onto various workpiece surface. The coating method involves purely physical process such as high temperature vacuum evaporation with subsequent condensation.

FOX Ferox FX-630 B Survival Knife

- Made by Fox Knives in Italy -

Design by: "Tommaso Rumici".

*Please request availibilty*

Introduction:

The Ferox is a light fixed blade of small dimensions, it is easy to carry with you, even on those occasions where you do not expect to need a knife. The straight handle has two G10 scales with nine grooves, occupied by as many o-rings. In addition to increasing the grip, the rubber rings serve to retain two hexagonal bits, of standard size, in their respective housings. By inserting them in the magnetic hole at the end of the handle, the user has two screwdrivers available, one flat head and one Philips, in that way he does not risk to damage the tip of the knife by trying to use it as such.

Specifications:

Steel: stainless steel N690Co HRC 58-60
Blade length: 3.64" inch / 90 mm
Total length: 8.26” inch / 210 mm
Handle length: 4.72” inch / 120 mm
Handle: G10 Black

Blade thickness: 4 mm
Overall weight 132 gr.

Additional Information:

Tool Set: Included
Leather Sheath: Included
Blade Coating: Physical Vapor Deposition (PVD)

PVD
(Physical Vapor Deposition) is a variety of vacuum deposition methods used to deposit thin films by the condensation of a vaporized form of the desired film material onto various workpiece surface. The coating method involves purely physical process such as high temperature vacuum evaporation with subsequent condensation.

FOX Flipper FX-302 or FX-302 ST or FX-302 G10 Folding Knife

- Made by Fox Knives in Italy -

Design by: "Jens Ansø".

Introduction:

The Flipper features a sculpted handle pattern often referred as ‘Ansø texture’.
A very comfortable handle and a curvy utility blade.

Jens Ansø:

“Ansø knives is about beauty, simplicity and purpose driven design”.

- Please select your desired version in the selection menu above -

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.54" inch / 90 mm
Total length: 8.07” inch / 205 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Titanium / Palisander wood / G10 black

Blade thickness: 4 mm
Overall weight 185 gr.

Additional Information:

Blade Coating: Satin / Black Idroglider stone washed

Clip: stainless steel 420J2B

Sheath: Included

Handle: Hole for Safety Cord

 

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.

FOX Forest 576 Back-Lock Folding Knife

- Made by Fox Knives in Italy -

Design by: "Fox Knives".

Introduction:

The beautiful Forest 576 pocket knife from Fox-Knives impresses not only with its high quality, but also with the balanced price-performance ratio. This is a high quality folding knife in the premuim class.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.74" inch / 95 mm
Total length: 8.46” inch / 215 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Pakka wood / Amboina wood / Black Micarta

Blade thickness: 3.5 mm
Overall weight 230 / 230 / 125 gr.

Additional Information:

Sheath: Included

Blade Coating: Satin

Bolsters: 430 stainless steel

Handle: Hole for Safety Cord (not on Fox Forest 576RT Amboina wood)

Locking Mechanism: Back Lock

FOX FX-515 W Terzuola Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bob Terzuola".

Introduction:

This knife is a “Every Day Carry” designed for daily utility and self defense. It is compact and strongly made with fine materials. Easy to carry with its convenient clip.

Bob Terzuola:

"I always design my knives to be functional but graceful. Utility is always the main factor in my designs as a knife should be perfectly useful and comfortable in a variety of positions and cutting situations”.

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.54" inch / 90 mm
Total length: 7.87” inch / 200 mm
Handle length: 4.33” inch / 110 mm
Handle scales: Ziricote wood

Blade thickness: 3 mm
Overall weight 110 gr.

Additional Information:

Blade Coating: satin

Sheath: Included

FOX FX-525 OL or  FX-525 B or FX-525 BE Terzuola Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bob Terzuola".

Introduction:

Bob Terzuola:

"I always design my knives to be functional but graceful. Utility is always the main factor in my designs as a knife should be perfectly useful and comfortable in a variety of positions and cutting situations”.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.35" inch / 85 mm
Total length: 7.87” inch / 200 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Olive wood / Bocote wood  / Birch wood  

Blade thickness: 3 mm
Overall weight 100 gr.

Additional Information:

Blade Coating: satin

FOX GECO FX-537 BR Tactical Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bastien Coves".

Introduction:

The FOX FX-537 GECO in one of the last FOX’s knife made in collaboration with the French custom knife maker Bastien Coves (Bastinelli Knives). The GECO is a small burly, tactical frame lock flipper, with an iconic ‘Basti­nelli’ design with high versatility.

Specifications:

Steel: stainless steel N690Co HRC 58-60
Blade length: 3.34" inch / 85 mm
Total length: 8.26” inch / 210 mm
Handle length: 4.92” inch / 125 mm
Handle scales: G10 black + titanium bronze

Blade thickness: 3 mm
Overall weight 129 gr.

Additional Information:

Blade Coating: black Idroglider stone washed

Clip: stainless steel 420J2B

FOX GECO FX-537 SW Tactical Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bastien Coves".

Introduction:

The FOX FX-537 GECO in one of the last FOX’s knife made in collaboration with the French custom knife maker Bastien Coves (Bastinelli Knives). The GECO is a small burly, tactical frame lock flipper, with an iconic ‘Basti­nelli’ design with high versatility.

Blade thickness: 3 mm
Overall weight 129 gr.

Additional Information:

Blade Coating: stone washed

Clip: stainless steel 420J2B

FOX Parong Karambit FX-637 Fixed Blade Knife

- Made by Fox Knives in Italy -

Design by: "Richard Derespina".

Introduction:

Richard Derespina:

“I have been making Karambits since 1999. My design is ergonomic and geometry”.

- Please select your desired version from the drop-down menu above -

 

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.74" inch / 95 mm
Total length: 8.86” inch / 225 mm
Handle length: 5.12” inch / 130 mm
Handle scales: G10 black or Olive wood  

Blade thickness: 4 mm
Overall weight 190/231 gr.

Additional Information:

Blade Coating: black Idroglider or Satin

Back Ring: N690Co stainless steel

Sheath: Included                

FOX Pheasant BR-011F Browning Feather Folding Knife

- Made by Fox Knives in Italy -

Design by: "Russ Kommer".

Introduction:

The Pheasant knife has a classic design with an elegant inlayed pheasant feather into the handle scales, meant to collectors or hunters! The classic blade is the result of many years of hunting in Alaska! As rugged as the men and women that carry it!

Russ Kommer:

“When I design any knife It has to have flow to the design! Once I have the right flow for the knife it will create its own beauty lines! My knives even in a tactical model have beauty lines! (Nice clean grinds, rounded to fit your hand this creates flow!) I use the three F process! Fit, Finish, Function”.

Steel: Stainless steel sandvik 12C27 HRC 56-58 
Blade length: 3.54" inch / 90 mm
Total length: 8.46” inch / 215 mm
Handle length: 4.92” inch / 125 mm
Handle scales: Resin + pheasant feather

Blade thickness: 3 mm
Overall weight 130 gr.

Additional Information:

Blade Coating: satin

Bolsters: 430 stainless steel

Sheath: Included

The Muela Curro folding knife is a top-quality traditional Spanish bandolero knife. The Horn handle scales with brass inlays give the knife an elegant look. The blade is crafted from MOVA 1.4116 steel, a high-quality chromium-molybdenum-vanadium alloyed steel, and traditionally cannot be locked. Comes in a high-quality box. This beautiful Muela collector's knife comes with a nice gift box.

Specifications:

Steel: MOVA 1.4116 stainless steel
Blade length: 5.039” inch / 128 mm
Total length: 10.948” inch /  279 mm
Handle length: 5.944” inch / 151 mm
Handle scales: Bull Horn
Bolster: Brass
Knife weight 151 gr.

Blade thickness: 2.5 mm

Additional steel informations:

MOVA 1.4116 - X50CrMoV15 - Hardness: 57-58 HRC

It´s classic steel used in fixed knives and folding knives. An excellent combination of Molybdenum and Vanadium that is highly stain resistant, though and corrosion resistant.

Spanish folding knife replica from XVIII. Century with genuine stag and brass scales. Old-fashioned lockback system. Knife with stag handle and brass. The blade is made of MOVA 1.4116 stainless steel.

Specifications:

Steel: “MOVA” 1.4116 (X50CrMoV15)
Blade length: 3.543” inch / 90 mm
Total length: 8.070” inch /  205 mm
Handle length: 4.527” inch / 115 mm
Handle scales: Stag Horn
Bolster: Brass
Knife weight 75 gr.

Additional steel informations:

“MOVA” 1.4116 (X50CrMoV15)

It´s classic steel used in fixed knives and folding knives. An excellent combination of Molybdenum and Vanadium that is highly stain resistant, though and corrosion resistant.