81mm - 100mm

German Böker 1969 Mach-1 Damascus knife

- Made in Solingen / Germany -

Introduction:

Unrestrained, with inherent power. Spirited, with a gentle disposition. The vastness in view, everyday life out of sight. The highway seemingly endless, with rough asphalt, crumbling yellow markings, and blowing desert dust. Before long, the endlessness gives way to a feeling of freedom, the sunset bathing the landscape and your spirit in a warming blanket of bliss and gentle wind. The deep sound of the powerful Windsor V8 Small Block engine with 186 kW (253 hp) has a calming effect, making the road trip in the Ford Mustang a very special moment. 

Inspired by the World War II fighter plane, the P-51 Mustang, Ford developed the Mustang in the early 1960s, which was launched in 1964. As a compact sports coupé, the affordable pony car, whose name derives from the galloping horse in the Ford Mustang's radiator grille logo, appealed primarily to a younger clientele. To counter the high-powered competition from Dodge, Pontiac, and Chevrolet, Ford made a statement in the league of powerful muscle cars with the Mustang Mach-1. The first-generation Mach-1 from 1969 was available exclusively as a fastback variant and differed from the production model in both appearance and performance: A sports suspension, matte black sports stripes, and a hood with cooling air intake, chrome exhaust tips and fuel cap, hood pins, front and rear spoilers, and a luxurious interior gave more than 72,000 units of this model a real boost in sales.

Over the years, the Mustang has become the epitome of the muscle car and is now continuing its legacy in its 7th generation. Boker references the vehicle's unmistakable design and makes the legend even more tangible in the 1969 Mach-1 Damascus knife of the same name. Parts from the wheel hub, wishbone, and suspension were used for the elegant 84-layer Damascus blade, which was hand-forged by Chad Nichols in a wave pool pattern inspired by the tire marks burned into the asphalt after a circular donut drift. The ball-bearing blade with its distinctive false edge opens smoothly via the removable thumb pin and cuts with rich torque. To prevent the passionate knife from getting out of hand, the liner lock locks the blade with the familiar coolness of a Ford Mustang. Finger recesses in the handle made of lightweight, high-strength aluminum are reminiscent of the fenders of the muscle car, while the gold-colored inlay of the front handle shell ties in with the side trim of the door and body. 

The expressive Silver Jade color scheme of the handle emphasizes the sporty look of the pocket knife and creates a noticeable V8 vibration in the hand. The sloping back of the handle is nostalgically inspired by the fastback contour of the car body, while the detailed blade screw makes the forward thrust of the wheels palpable. Straight and angular, the stainless steel clip, milled from solid metal, is reminiscent of the door handles on the Ford Mustang. Delivery includes a high-quality floating display, impatient hoof scraping, and the necessary dose of nonchalance. Handcrafted at the Boker factory in Solingen.

Specifications:

Steel: Damascus
Blade length: 3.228“ inch / 82 mm 
Total length: 7.795” inch / 198 mm
Handle length: 4.566” inch / 116 mm
Handle scales: Aluminum

Designer: Tommaso Rumici

Blade thickness: 3.63 mm
Overall weight 116 gr.

Boker Kalashnikov Bayonet Damascus Folding Knife

- Made in Solingen / Germany -

Introduction:

In 1947, Mikhail Kalashnikov presented the AK-47 assault rifle he had designed to the Red Army and immediately convinced the decision-making bodies of its development. Only two years later, the now world-famous AK-47 was officially put into service as the "7.62 mm Awtomat Kalasshnikova obraztsa 1947". Even then, the simple and reliable design as a gas pressure loader with a rotary head breech, the consistent use of sheet metal stampings that could be produced quickly and inexpensively, and the adherence to a cartridge class introduced by the Wehrmacht with the StG 44 with an average performance between submachine gun and rifle ammunition were trend-setting to this day. These features resulted in the Kalashnikov system being the most widely built and replicated handgun in history, with an estimated 100 million made worldwide today.

Introduced in 1959 along with the AKM, the revised variant of the AK-47, the bayonet was no less revolutionary and formative for later designs than the famous assault rifle itself. The concept was based on a knife originally developed by R. Todorov for combat swimmers. It marked a move away from long bayonets, which were used purely as stabbing weapons, to a short, mountable utility knife with insulated wire shears and a multifunctional back saw.

Mikhail Kalashnikov personally visited the Boker Manufactory in Solingen in 2002 and officially introduced the Boker Kalashnikov line of knives to the public. More than 70 years after the AK-47 entered service, we now present a truly exceptional special edition model of the knife line and once again honour his brilliant engineering achievement. The Boker Kalashnikov Bayonet Damscus is equipped with a unique Damascus blade made from the steel of the 6Ch3 and 6Ch4 bayonets according to the GRAU index of the former Soviet Army and decorated with the signature of General Kalashnikov. The stainless Damascus by Chad Nichols consists of 80 layers and is forged by hand in the Virus pattern. It features an unusually intricate pattern that is the result of a very controlled forging process. The blade with the pandur tip adopted from the bayonets is opened with the help of the thumb stud and locked by a sturdy linerlock.

The handle is CNC machined from a block of 6061-T6 Aluminum and then hardcoat anodized black. The stabilized inlays are made of domestic hornbeam wood, reminiscent of the stock wood of the famous assault rifle, and together form the shape of the forend's distinctive vents. The Russian Amber Shellac colour of the original stocks has been precisely matched. They are also CNC milled from the solid and inserted by hand. All screws and the clip (tip-up/r) are also black anodized. Handmade in the Boker Knife Manufactory in Solingen. Delivery with noble floating display, certificate of authenticity and individual serial number.

Specifications:

Steel: Damascus stainless steel
Blade length: 3.779“ inch / 96 mm 
Total length: 8.976” inch / 228 mm
Handle length: 5.196” inch / 132 mm
Handle scales: Aluminum / Iron Wood

Blade thickness: 4 mm
Overall weight 158 gr.

Böker Leopard I. Damascus Folding Knife (Limited Edition)

- Made in Solingen / Germany -

Introduction:

The impressive Boker Leopard-Damascus I. is a real piece of living history. The blade is made of high-performance Damascus, forged exclusively for Boker from the gun barrel steel of the German Leopard I battle tank. It has a hardness of 61 to 63 HRC and a high degree of toughness at the same time. The 300-layer Damascus in the Small Pyramids pattern is ideally suited to the hardcoat-anodised handle made of CNC-milled AlMgSi1, which is considerably higher quality than the usual AlMg3 due to the higher silicon proportion. The decorative inlays are made of certified imported Ziricote Wood. With convertible clip (tip-up/tip-down). Delivery with gift box, certificate of authenticity and individual serial number.

Specifications:

Steel: Damascus
Blade length: 3.543“ inch / 90 mm
Total length: 8.267” inch / 210 mm
Handle length: 4.724” inch / 120 mm
Handle scales: Aluminum / Ziricote Wood
Overall weight 120 gr.

Note: We from Dream-Knives have no influence on which serial number we receive from Böker.

German Böker Stag Pocket Knife "Mono CPM"

Made in Solingen / Germany -

Introduction:

As familiar as it used to be, the single-blade Boker hunting pocket knife had been missing from our product range for a long time. However, we listened to the many inquiries we received regarding a new version - and so, this particularly sturdy knife is once again complementing our Trio and Quadro series. Focusing on the most important feature, which is the potent 3.5 mm blade, the Mono is the perfect knife for the huntsman who doesn't care for additional tools. The blade is secured via the usual back lock. The nickel silver bolsters and stag scales pay homage to tradition. The blade is made from powder metallurgical CPM CruWear with great edge retention. With its outstanding performance profile and a Rockwell hardness of 62-63 HRC, this steel has already set the standard for the Trio CPM and Quadro CPM.

Specifications:

Steel: CPM-CruWear
Blade length: 3.503“ inch / 89 mm
Total length: 7.677” inch / 195 mm
Handle length: 4.173” inch / 106 mm
Handle scales: Stag Horn

Blade thickness: 3.5 mm
Overall weight 130 gr.

Additional informations about "edge retention":

Edge retention describes the resistance of the edge of a blade against being dulled by chemical, mechanical and thermal influences. It expresses how long the blade remains sharp under certain circumstances and over a certain period of time. This property is determined by the blade material, the production process employed to make the blade, and its edge geometry. Another major factor is the behavior of the user, which has a significant influence on a blade\'s edge retention. If the knife is used incorrectly or not for its intended purpose, the edge will wear out quickly and might even be destroyed.

German Böker P08 Luger Damascus Collector's Boot-Dagger

- Made in Solingen / Germany -

Introduction:

The unique Boker P08-Damascus boot dagger connects the world of knives with historical military history in an inimitable way. The P08, also known as Parabellum Pistol or simply Luger, is still considered legendary today and convinces with highest precision and reliability. The knee-joint lock with short barrel return, developed by Georg Luger, made the pistol 08 incredibly compact and solid. Added to this was the calibre 9 mm Luger (9x19 NATO), also developed by Luger for the new pistol, which was one of the most powerful short firearm calibres at the time and is still the most widely used official calibre in the world today.

It was used as a standard pistol by the German armies in both world wars, but also gained world fame beyond the country's borders in a very short time. As early as 1914, the weapon was used in the armies of Bulgaria, the Netherlands, Portugal and Turkey and was considered a much sought-after prey weapon until the end of the Second World War. The production of the compact pistol required 14 kilogrammes of Steel and its design required such a high degree of precision that completely new demands were made on the production technology. Its unmistakable, almost iconic appearance secured it a firm place in popular culture like no other pistol.

The Boker P08-Damascus not only incorporates various design elements of the unusually aesthetic official weapon, but is also equipped with a unique damascus blade made of the barrel steel of the precise pistol. The remarkable damascus is forged for us by Chad Nichols by hand in the Boomerang pattern. The handle scales of the likewise compactly built boot dagger are made of certified imported rosewood and are reminiscent of the classic, simple checkering of the characteristic pistol grip. The same construction of the retaining screws is used to mount these handle scales as on the P08. And the cone of the exposed barrel is also found in the angle of the handle sides.

The bolsters and end knob are made of steel and are finished with a dark stonewash finish. Supplied with a high quality black leather sheath with a sewn-in ulticlip and can be easily attached thanks to the locking spring clip. Thus the Boker P08-Damascus boot dagger can be pulled effortlessly while the sheath is reliably held in place by the Ulticlip. Handmade in the Boker Knife Manufactory in Solingen. With noble floating display, certificate of authenticity and individual serial number.

Specifications:

Steel: Damascus (see description)
Blade length: 3.228“ inch / 82 mm 
Total length: 6.889” inch / 175 mm
Handle length: 3.661" inch / 93 mm
Handle scales: Rose Wood

Blade Thickness: 3.5 mm
Overall weight 106 gr.

German Böker Stag Pocket Knife "Quadro CPM"

- Made in Solingen / Germany -

Introduction:

The Boker Hunters Knife Quadro continues to delight the traditionally oriented hunters. The classic scales made of stag give the Pocket knife an extraordinary charm. A special feature of knife scales made of stag  is their individual shape. While wood handles differ mainly in their grain and color, scales made of stag are also characterized by their very specific surface structure, which makes each item a unique piece of art.

The demand for premium steels with extreme edge-holding is also immense for hunting applications, with a traditional knife design generally given preference in this case. Starting immediately, our extensively field-tested Trio hunting classic is optionally also available with a powdered-metal primary blade made from CPM-CruWear with a Rockwell Hardness of 62-63 HRC. This extraordinarily wear-resistant blade steel gives woodsmen significantly longer use between resharpenings compared to traditional 440C. The original design of the Quadro CPM was otherwise left intact, giving traditionally oriented hunters continued enjoyment. It also features a gutting blade, a saw and corkscrew.

Specifications:

Steel: CPM-CruWear
Blade length: 3.346“ inch / 85 mm
Total length: 7.677” inch / 195 mm
Handle length: 4.330” inch / 110 mm
Handle scales: Stag Horn

Blade thickness: 3.5 mm
Overall weight 196 gr.

German Böker Tiger Damascus Folding Knife

Collector's knife *Serial numbered*

- Made in Solingen / Germany -

Introduction:

The impressive Boker Tiger- Damascus-adds a very special model to our series of pocket knives steeped in history. The collector's knife with a historical past is a real piece of living history and combines high-quality craftsmanship with authentic materials. Known worldwide as the Tiger, the Panzerkampfwagen VI was used by the Wehrmacht from the late summer of 1942. It is considered one of the most famous tanks in history, despite its modest production number of only 1350 units and the resulting low strategic importance. The development of the heavy tank can be traced back to 1937, and series production began in August 1942. Today, there are only seven preserved units, which are exhibited all over the world. Due to the low availability, the so-called Frankentiger was even assembled for this purpose from wreckage parts of different production years.

The tank parts we use come from a Tiger I of the Schwere Panzerabteilung 502, which was destroyed in combat in Latvia in the summer of 1944 in a heavily wooded area near the town of Bauska. Based on the wreckage found at the original excavation site, it was determined that this Tiger was an early to mid-production model. Examination of battle damage to the remains, military records and local historical accounts revealed that this Tiger tank collided with both a Russian T-34 medium tank and an SU-76 anti-tank gun, and was also damaged by a stationary 45-mm anti-tank gun. It is still unclear which of the impacts caused the most damage and sealed the fate of the Tiger. However, as several 76-mm fragments were lodged in the heavy armour, it is assumed that a nearby T-34 landed the decisive hits before it was destroyed 300 metres away, too.

Otto Carius and Albert Kerscher, two of the most successful tank commanders of the Second World War, were attempting to stop the advance of Soviet forces on Riga at the time, with the Schwere Panzerabteilung 502. The division was able to so devastatingly defeat the enemy blockade forces near Tukums that it was able to retreat to the Latvian Courland together with more than 500,000 other soldiers of the Heeresgruppe Nord. There the forces were encircled in the further course of the Soviet advance. The Kurland Cauldron served as a bridgehead and could be supplied by the Kriegsmarine via sea. It withstood six major attacks by Soviet forces until the unconditional surrender on 8 May, 1945.

The straight-edged Boker Tiger-Damascus is equipped with a unique Damascus blade made from the steelof the battle tank destroyed at Bauska. The non-stainless mosaic Damascus is forged for us by hand by Chad Nichols in the Intrepid pattern and is reminiscent of the tank tracks left in the ground by the Tiger's heavy tracks. Unlike conventional Damascus, the production of mosaic Damascus does not create layers, but complex Damascus bars are forged by hand into a mosaic in an elaborate and very complicated process. The ball-bearing blade is opened by a thumb stud and locked by a sturdy steel framelock with a stonewash finish, while a Hinderer lock-stop acts as an over-extension protection for the lock. The overall shape of the knife pays homage to the famous lines of the tank, while the decorative pivot screw is modelled on the main drive sprocket. The slightly contoured handle scales made of burlap Micarta are provided with precisely milled grooves, which are reminiscent of the characteristic surface structure of the Zimmerit coating of German armoured vehicles. With lanyard hole and milled clip (tip-up/r) witt steel ball. Handmade in the Boker Knife Manufactory in Solingen. Supplied with a classy suspended display, a certificate of authenticity and an individual serial number.

Specifications:

Steel: Damascus 
Blade length: 3.346“ inch / 85 mm 
Total length: 7.874” inch / 200 mm
Handle length: 4.527” inch / 115 mm
Handle scales: Micarta

Blade thickness: 4 mm
Overall weight 139 gr.

German Böker Tirpitz Damascus GOLD Pocket Knife

Collectors knife *Serial numbered*

Made in Solingen / Germany 

*Pre-order available: Ready to ship at July 10th 2026*

Introduction:

On April 1, 1939, the battleship Tirpitz, named after Fleet Admiral Alfred von Tirpitz, was christened and launched in Wilhelmshaven. To this day, no larger battleship has ever been built in Europe. Eighty years later, Boker presents the Tirpitz-Damast Gold Special Edition as a tribute to remembrance—honoring a continent that endured two World Wars and has lived in peace and freedom since 1945. In memory of the countless victims of these conflicts, and especially the crew of the Tirpitz, €10 from each knife sold is donated to the War Graves Commission. The Tirpitz itself was sunk in 1944 off the coast of Norway. Following the end of the Second World War, a Norwegian salvage company recovered parts of the wreck to repurpose its highly alloyed steel for civilian use. Boker was granted access to selected sections of the ship’s original armor. These authentic fragments of history were entrusted to Boker’s DAMASCUS specialist, who forged them into an extraordinary steel with a story unlike any other. At first glance, the Boker Tirpitz-Damast Gold captivates with its incomparable Damascus blade, exclusively gold-plated for this special edition. The blade consists of 300 layers of hand-forged Tirpitz Damascus in the striking “Great Pyramid” pattern, with the subtle golden sheen lending exceptional depth and brilliance. All key components—including the thumb stud, blade and handle screws, spacers, liners, pocket clip, and replacement clip plate—are likewise gold-plated, creating a harmonious and luxurious appearance. The blade is secured by a 1.5 mm thick liner lock, ensuring reliable operation. A reversible pocket clip allows for both tip-up and tip-down carry. The handle inlay is crafted from locally sourced walnut wood and features the original Tirpitz coat of arms and name, adding a dignified historical accent. Each knife in this limited special edition represents an elegant fusion of history, remembrance, and modern craftsmanship. Completely handcrafted in the Boker Manufactory in Solingen, the knife is delivered in a premium frame display case, complete with an individual serial number and a certificate of authenticity.

Specifications:

Steel: Damascus
Blade length: 3.897“ inch / 99 mm
Total length: 9.015” inch / 229 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Aluminum / Walnut Wood

Blade thickness: 4 mm
Overall weight 180 gr.

German Böker Tirpitz Damascus Pocket Knife

Collectors knife *Serial numbered*

Made in Solingen / Germany 

Introduction:

A piece of history comes to life! The Tirpitz, sister ship of the legendary Bismarck, was the largest battleship ever launched for the German Navy. After the commissioning in February 1941, the Tirpitz soon became a permanent threat for the Western Allies? Navy in the Northern Atlantic. History tells of many attempts to destroy this mighty weapon-loaded colossus. After the Tirpitz was heavily damaged by air attacks from the British Royal Air Force in September 1944, the ship was placed stationary at the Norwegian coast at Tromsö. Once again, the Tirpitz was the primary target for heavy attacks of the Royal Air Force. Then, on November 12. 1944, the Tirpitz was hit by special "Tallboy bombs", which caused the ship to roll over in the shallow water.

Shortly after WW II, a Norwegian specialized company began to explore the wreck and to obtain the high alloy steelfor further civil use. Scientists were very interested in this material as it was used in research and development of measurement technology and even in the astronautics industry. Especially for Boker, Norwegian divers have now retrieved parts of the special armor of the Tirpitz from the Fjord. These pieces of living history are being exclusively forged by our Damascus forger to an extraordinary Damascus Steel with an exciting background. The pattern "Great Pyramids", with more than 300 layers, adorns the mighty 4" blade and makes this piece the highlight of any collection. The combination of the Tirpitz steel and carbon tool steels also creates an extremely rugged Damascus Steelwhich has a hardness of 61 to 63 HRC and can handle any cutting task with ease. The handle, made of high strength AlMgSi1 Aluminum (with Silicium, making it a much higher quality than standard AlMg3), is hardcoat anodized and provides a firm and secure grip. The reversible clip allows for tip-up or tip-down carry. For the handle inlay we chose domestic walnut, which has a long history as shaft wood for German rifles due to its superior characteristics. This eye-catching inlay also features the original Tirpitz crest. This knife combines history, tradition and modern technology in a more than unique way. Comes complete in a presentation box with a certificate of authenticity and is serial numbered.

Specifications:

Steel: Damascus
Blade length: 3.897“ inch / 99 mm
Total length: 9.015” inch / 229 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Aluminum / Walnut Wood

Blade thickness: 3.5 mm
Overall weight 167 gr.

German Böker Tirpitz Damascus Pocket Knife

Collectors knife *Serial numbered*

Made in Solingen / Germany 

Introduction:

The huge interest in our extraordinary collector's knife, the Boker Tirpitz Damascus, has convinced us to design another model featuring this historic damask steel. The Boker Tirpitz Damascus Wood is much flatter, with a thickness of around 10 millimeters, and has a much more elegant design thanks to its continuous scales made of local walnut wood. The matte wood of the contoured handle scales is milled three-dimensionally using CNC technology, and the front proudly displays the Tirpitz coat of arms and lettering.

The sister ship of the legendary Bismarck was the largest battleship ever launched for the German navy. Immediately after the end of World War II, a Norwegian specialist company began salvaging the ship, which had sunk off the Norwegian coast, in order to make the high-alloy steel available for civilian purposes.

Norwegian divers recovered parts of the Tirpitz's special armor from the fjord for Böker. From these pieces of living history, the Böker damask smith exclusively forges an extraordinary damask with a fascinating history. The large pyramid pattern in 300 layers characterizes the powerful blade made of hand-forged Damascus steel and makes the knife a highlight of any knife collection.

The combination of Tirpitz steel with carbon tool steels also results in an extremely durable Damascus steel with a Rockwell hardness of 61 to 63 HRC, which is up to any task in everyday use. The blade is locked in place by a 1.5 mm thick liner lock and opened using the removable thumb stud. With clip (tip-up). The knife is delivered in a high-quality transparent frame box with certificate and serial number.

Specifications:

Steel: Damascus
Blade length: 3.897“ inch / 99 mm
Total length: 9.015” inch / 229 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Walnut Wood

Blade thickness: 4 mm
Overall weight 170 gr.

Cudeman 115-B / 115-B-K Mini Boina Hunting Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman Hunting Knife with Böhler blade.

There are two Editions available: Standard or KYDEX.

- Please select your desired version in the selection menu above -

Specifications:

Steel: BÖHLER N-695 59/61 HRC
Blade length: 3.543” inch / 90 mm
Total length: 7.677” inch / 195 mm
Handle length: 4.134” inch / 105 mm
Handle scales: Black Micarta with Detailed Red Line
Blade Width: 5.33 mm
Net weight 266 gr.

Description:

All versions.

– Fixation of the Handle : Allen Stainless Steel Screws

– Blade shape: Clip-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

Standard Edition Sheath Version:

– Black Leather

– Hole for a Safety Cord

– Sheath weight: 58 gr

– Glass-Breaker

– Wire-Breaker

– Jumping on the Spine

KYDEX Edition Sheath Version:

– Hole for a Safety Cord

– Sheath weight: 58 gr

– Glass-Breaker

– Wire-Breaker

– Jumping on the Spine

– Firesteel

Cudeman 115-J Mini Boina Hunting Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman Tactical Knife with Böhler blade.

Specifications:

Steel: BÖHLER N-695 59/61 HRC
Blade length: 3.543” inch / 90 mm
Total length: 7.677” inch / 195 mm
Handle length: 4.134” inch / 105 mm
Handle scales: Orange G10 with Detailed Black Line
Blade Width: 5.33 mm
Net weight 279 gr.

Description:

– Fixation of the Handle : Allen Stainless Steel Screws

– Blade shape : Clip-Point

– Grind : Hollow Grind

– Blade Finish : Satin Finish

– Black Leather

– Hole for a Safety Cord

– Sheath weight : 64 gr

– Glass-Breaker

– Wire-Breaker

– Jumping on the Spine

Cudeman 115-N or 115-N-K Mini Boina Tactical Hunting Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman Tactical Knife with MOVA blade.

There are two Editions, Standard or KYDEX.

- Please select your desired version in the selection menu above -

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 3.543” inch / 90 mm
Total length: 7.677” inch / 195 mm
Handle length: 4.134” inch / 105 mm
Handle scales: Black Micarta Coated with Detailed Red Line
Blade Width: 5.33 mm
Net weight 266 gr.

Description:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Clip-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

Standard Edition Sheath Version:

– Black Leather

– Hole for a Safety Cord

– Sheath weight: 58 gr

– Glass-Breaker

– Wire-Breaker

– Jumping on the Spine

KYDEX Edition Sheath Version:

– Hole for a Safety Cord

– Sheath weight: 58 gr

– Glass-Breaker

– Wire-Breaker

– Jumping on the Spine

– Firesteel

Cudeman 115-NC Mini Boina Tactical Hunting Knife

- Made by Cudeman in Spain -

Introduction:

The Cudeman Mini Boina Verde is one of the brand's best sellers. Thousands of units sold attest to the quality of this unique, versatile, all-purpose tactical knife. This naturally tactical model is the smallest in the Boina Verde family, which also includes its medium-sized sibling, the Cudeman Boina Cadete, and its larger and better-known sibling, the Cudeman Boina Verde Español. It is made of Böhler N-695 steel with a Rockwell hardness of 59/60 HRc. The black micarta with red spacer on its handles is a type of material that combines the essential characteristics of impact resistance and impermeability to water splashes. In this more tactical version, its black blade is achieved through a bluing treatment, giving it an even more tactical look. It is a true 4×4 in any field, as its steel and concave blade make it very sharp and resistant. Its premium black leather sheath with red stitching is multi-position. The complete version includes a leather adapter with a signal mirror, sharpening stone, red 550 paracord, and flint. A versatile knife with all its accessories included. 

Specifications:

Steel: Böhler N-690 -  59/60 HRC
Blade length: 3.543” inch / 90 mm
Total length: 7.677” inch / 195 mm
Handle length: 4.134” inch / 105 mm
Handle scales: Black Micarta Coated with Detailed Red Line
Blade Width: 5 mm
Net weight 250 gr. / Sheath weight 300 gr.

Description:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Clip-Point

– Grind: Hollow Grind

– Blade Finish: Black coated

Luxury Edition Sheath:

- Lanyard hole
- Glass breaker
- Wire cutter
- Zipper on the blade for improved grip
- Multi-position sheath
- Full black leather adapter (644-N) including:
- Sharpening stone
- Signal mirror
- Sundial
- Flint
- Red paracord (2.80 m)

Cudeman 115-X / 115-X-K Mini Boina Hunting Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman Tactical Knife with Böhler blade.

There are two Editions available: Standard or KYDEX.

- Please select your desired version in the selection menu above -

Specifications:

Steel: BÖHLER N-695 59/61 HRC
Blade length: 3.543” inch / 90 mm
Total length: 7.677” inch / 195 mm
Handle length: 4.134” inch / 105 mm
Handle scales: Brown Micarta with Detailed Red Line
Blade Width: 5.33 mm
Net weight 266 gr.

Description:

All versions.

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Clip-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

Standard Edition Sheath Version:

– Brown Leather

– Hole for a Safety Cord

– Sheath weight: 58 gr.

– Glass-Breaker

– Wire-Breaker

– Jumping on the Spine

KYDEX Edition Sheath Version:

– Hole for a Safety Cord

– Sheath weight: 58 gr

– Glass-Breaker

– Wire-Breaker

– Jumping on the Spine

– Firesteel

Cudeman 116-B  Safari Hunting  Knife

- Made by Cudeman in Spain -

Cudeman Hunting Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 3.543” inch / 90 mm
Total length: 7.874” inch /  200 mm
Handle length: 4.331” inch / 110 mm
Handle scales: Polished White Micarta with Detailed Red Line
Blade thickness: 4 mm
Knife weight 171 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 39 gr

– Fixation of the Handle: Flat-Head Rivets

– Bolster: Polished Molybdenum Vanadium

– Blade Shape: Standard

– Grind: Flat Grind

– Blade Finish: Satin Finish

– Hole for Safety Cord

Cudeman 116-M Safari Classic Hunting Knife

- Made by Cudeman in Spain -

Cudeman Hunting Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 3.543” inch / 90 mm
Total length: 7.874” inch /  200 mm
Handle length: 4.331” inch / 110 mm
Handle scales: Polished Black Micarta with Detailed Red Line
Blade thickness: 4 mm
Knife weight 171 gr.

Additional Information:

– Black Leather Sheath included

– Sheath Weight: 39 gr.

– Fixation of the Handle: Flat-Head Rivets

– Bolster: Polished Molybdenum Vanadium

– Blade Shape: Standard

– Grind: Flat Grind

– Blade Finish: Satin Finish

– Hole for Safety Cord

Cudeman 133-H Skinner Gut Hook Hunting Knife

- Made by Cudeman in Spain -

Cudeman Skinner Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 3.543” inch / 90 mm
Total length: 8.465” inch /  215 mm
Handle length: 4.921” inch / 125 mm
Handle scales: Black Rubber
Blade thickness: 4 mm
Knife weight 161 gr.

Additional Information:

– Black Leather Sheath included

– Sheath Weight: 71 gr.

– Fixation of the Handle: Oval-Head Rivets

– Blade Shape: Skinner

– Grind: Hollow Grind

– Blade Finish: Satin Finish

– Hole for Safety Cord

Cudeman 147-L "ALAZÁN" Hunting Knife

- Made by Cudeman in Spain -

The Alazán (143-L) is made with a natural olive wood handle, carefully selected for its unique beauty and extraordinary durability. It features black spacers that enhance its aesthetics and harmonize with the exclusive engraving on the handle: the head of the iconic Cudeman logo, crafted with great precision to add character and personality.
The blade of the Alazán is made of molybdenum vanadium steel, a material renowned for its strength, edge retention, and reliable performance in demanding conditions. The combination of this steel with the ergonomics of the handle makes this model a versatile and sturdy knife, ideal for bushcraft, survival, and outdoor use.
Each Alazán (143-L) comes with a handmade brown leather sheath with black stitching that complements the knife's aesthetics and ensures an elegant presentation consistent with its finishes.

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 3.740” inch / 95 mm 
Total length: 8.267” inch /  210 mm
Handle length: 4.527” inch / 115 mm
Handle scales: Satin Olive Wood
Blade thickness: 3.8 mm
Knife weight 170 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 60 gr.

– Fixation of the Handle: Flat-Head Rivets

– Blade Shape: Standard

– Grind: Hollow Grind

– Blade Finish: Satin Finish

– Hole for Safety Cord

Cudeman 150-C Classic Stag Hunting Knife

- Made by Cudeman in Spain -

Cudeman Hunting Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 3.924” inch / 100 mm
Total length: 8.268” inch /  210 mm
Handle length: 4.331” inch / 110 mm
Handle scales: Polished Deer
Blade thickness: 4 mm
Knife weight 170 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 60 gr.

– Fixation of the Handle: Oval-Head Rivets

– Bolster: A-304 Stainless Steel

– Blade Shape: Clip-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

– Hole for Safety Cord