3,188inch - 3,937inch

Fallkniven Embla "SK2L" Hunting Knife

- Made by Fällkniven -

Introduction:

The design of this beautiful hunting knife follows the basic principles of Swedish minimalism – that the design should be simple, neat, and functional. To this minimalist foundation, we add our laminated cobalt steel, which is renowned for its ability to take and keep an excellent edge. Of course, the edge is convex, the sharpest / strongest edge construction we know of, and what’s more, the oldest in human history. It can be treated with any kind of furniture polish, gunstock oil, or other liquids containing thinner and linseed oil. A black, low-hanging leather sheath houses the knife when not in use.

Please note:

There can be some variation in pattern and shades on the wooden handles.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 3.94" inch / 100 mm
Total length: 8.35” inch / 212 mm
Handle length: 4.41” inch / 112 mm
Handle scales: Desert Ironwood

Blade thickness: 4,5 mm
Knife weight 164 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather 

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Protruding Broad Tang

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven F1pro10 Pilot Survival Knife

- Made by Fällkniven -

Introduction:

There are basic survival knives, and there are survival knives for the professional. Our original models of the F1, S1 and A1 have provided exceptional service for more than 20 years. And due to their outstanding quality and durability they will continue to perform for many more years. Nevertheless our drive to continually improve our knives has led us to develop the new Pro Series. The Pro Series are survival knives of near-unimaginable quality, durability and performance.

Simply put, a knife is a blade and a handle. To remain strong and stay sharp the knife must be made of high quality materials. But if the claim is made that a knife is “professional” then the knife and its builder has a responsibility to the user to raise the bar far above what is common. The Pro Series truly is professional.

Compared to their predecessors, the Pro series of F1, S1 and A1 differs in the following important areas:

1. The original laminated VG10 steel is upgraded to a laminate cobalt steel (lam. CoS) blade that ensures a durable edge and improved edge retention.
2. The blades are thicker increasing the torsional rigidity so the knives will withstand even greater external forces.
3. The full-length tapered tang is wider and thicker and therefore significantly stronger.
4. The crossguard is now made of stainless steel and permanently welded to the tang.
5. The convex blade edge has been refined to improve its cutting properties.
6. The zytel sheaths are redesigned, more durable, and better suited for the Molle attachment system.

Understandably these knives fall into a higher price category. However, considering the unparalleled quality they are by no means over priced.

A professional survival knife must perform in all weather with no exceptions. The professional survival knife must be comfortable and safe to handle for both fine and rough work in summer heat and winter cold. We at Fallkniven have considered every design aspect of these superb professional survival knifes and we stand behind them with a lifetime warranty on materials and workmanship.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 3.94" inch / 100 mm
Total length: 8.54” inch / 217 mm
Handle length: 4.615” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 5 mm
Knife weight 182 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade Finish: Satin

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven F1z3G Hunting Knife

- Made by Fällkniven -

Introduction:

The Fällkniven F1z3G is an excellent and thoroughly developed hunting knife, which meets all requirements. With this very high-quality hunting and survival knife in the premium class, you fulfill the desire of a real Dream-Knife. Fällkniven has not spared any expense to produce this high-end product. The 3G stainless steel has a Rockwell hardness of HRC 62. The handle was made of non-slip Thermorun. This beautiful hunting knife comes with a Kydex sheath that ensures a secure hold of the knife.

Specifications:

Steel: 3G HRC 62
Blade length: 3.82" inch / 97 mm
Total length: 8.27” inch / 210 mm
Handle length: 4.45” inch / 113 mm
Handle scales: Thermorun

Blade thickness: 4.5 mm
Knife weight 153 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade Finish: Satin

Fallkniven Idun NL5L Hunting Knife

- Made by Fällkniven -

Introduction:

In Norse mythology, Idun was the goddess of fertility, and was responsible for guarding the apples that ensured the gods eternal youth. To many, she was also a symbol of love and rebirth, and in a famous poem she was referred to as the lover of the gods (ása leika). Unlike earlier knife models in the Northern Lights series, the NL5 is a little rounder and softer in form, and therefore an excellent choice as a hunting knife. The straight, fairly generous leather grip gives complete control over the powerful laminated VG7 blade. The NL5L is as attractive as it is effective especially in the hands of the experienced hunter. When it comes to the Northern Light Series nothing has been spared to make this knife as strong, beautiful and comfortable as possible. The knife is a pleasure to look at and a thrill to use.

The blade is made out of laminated VG7 steel, where the edge is in a technically well-designed VG7 steel and the sides consist of tough, all-stainless 420J2 steel. This combination is good since it brings together all conceivable and desirable properties such as resilience, resistance to torque, and edge-durability in a single blade. A 5 mm thick blade in itself would be strong enough for most tasks – with laminate technology one can expect an additional 20% strength in the form of resistance to bending, as compared to an ordinary VG7 blade.

The beautiful handle consists of specially selected oxhide that gives a sure and rugged grip. It ages with elegance and as the years pass it acquires an attractive brown patina. The handle is unaffected by oil and solvents and impervious to water. When the oxhide drys out, small cracks on the handle can appear, but they disappear when the knife is put to use again.

We at Fallkniven believe the convex edge to be the ultimate combination of cutting performance and edge strength. Anyone who knows anything about knife making knows that such an edge can only be made by hand, and that’s why 99.99% of all knives don’t have that kind of edge. Machines play a large part in how knives are made, and CNC (Computer Numerically Controlled) robots and grinders shape the blades as best they can. The machines are loaded with stacks of blade blanks so that production can go on 24 hours a day and the result is quite often quite good. Well, good for the price anyway. However, if you want top-drawer strength, tremendous corrosion-resistance, edge durability and custom design, no machine can come close to the craftsmanship of a trained and skilled knifesmith. Therefore, we take great pride in presenting our Northern Light Series even though we know that only the most quality-conscious knife user will appreciate its features.

Each Northern Lights series knife comes with a high-quality black leather sheath.

Specifications:

Steel: Laminated VG7 Wolf HRC 59
Blade length: 3.94" inch / 100 mm
Total length: 8.46” inch / 215 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Leather

Blade thickness: 5 mm
Knife weight 170 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather 

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Protruding Broad Tang

Fallkniven Jarl SK1L Hunting Knife

- Made by Fällkniven -

Introduction:

What distinguishes a Swedish knife?

Perhaps the apparently simple design or maybe providing a good and safe function, all without frills. The classic clean lines discern a philosophy that honours the skill and experience of the mind, where the tool is allowed to play its part but to outshine the one that holds the handle – the perfect combination. Handles of rich curly birch, solid nickel silver fittings and sharp blades of laminate powder steel. The world’s best, in our opinion. Open, low hanging black leather sheath, for easy access.

Please note:

There can be some variation in pattern and shades on the wooden handles.

Specifications:

Steel: 3G HRC 62
Blade length: 3.82" inch / 97 mm
Total length: 8.27” inch / 210 mm
Handle length: 4.45” inch / 113 mm
Handle scales: Curly Birch

Blade thickness: 4,5 mm
Knife weight 138 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather 

Handle: Lanyard Hole

Finger Guard: Nickel Silver

Tang: Protruding Broad Tang

Fallkniven Taiga Hunter TH1z Hunting Knife

- Made by Fällkniven -

Introduction:

The Taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. As shown in the design, TH1 is a handmade knife with a handle in the very exclusive desert ironwood (lat. Olneya tesota). These knives are numbered on the blade spine. What is special about these knives is the very secure plastic sheath where a specially designed locking system ensures that the knife is properly locked when it is placed in the sheath. It works regardless of weather and wind, sand, or snow.

Please note:

There can be some variation in patterns and shades on the wooden handles.

Specifications:

Steel: Laminated Cos HRC 60
Blade length: 3.31" inch / 84 mm
Total length: 7.40” inch / 188 mm
Handle length: 4.09” inch / 104 mm
Handle scales: Desert Ironwood

Blade thickness: 4.5 mm
Knife weight 149 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Finger Guard: Stainless Steel

Tang: Full Tang

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven Tre Kronor TK2z Hunting Knife

- Made by Fällkniven -

Introduction:

Tre Kronor, the Swedish knife series, offers a highly advanced technological solution combined with timeless Swedish design. As the result of a long development process, we are the first company in the world to be able to offer a laminated knife blade in 3G steel, edged with sintered steel, or powder steel. To this edge steel, we have added a resilient, anticorrosive steel which stabilizes the hard centre. This gives a rigid, strong blade that retains its edge extremely well. These knives are in the Swedish minimalist idiom, where form harmonizes with function. The result is an edged implement that the user will find an easy and accommodating knife — a world-beater from Sweden.

Tre Kronor #2
If price and performance are the deciding factors, then TK2 is the hands-down winner. The secure, comfortable grip and the powerful blade in laminated powder steel form a combination whose value is unparalleled in the world. It is a utility knife which one can rely on and which will perform for you through thick and thin. The knives are delivered in ordinary white box.

Specifications:

Steel: 3G HRC 62
Blade length: 3.94" inch / 100 mm
Total length: 8.46” inch / 215 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Thermorun

Blade thickness: 4,5 mm
Knife weight 185 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather 

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Full Tang

Fallkniven Tre Kronor TK2z Hunting Knife

- Made by Fällkniven -

Introduction:

Tre Kronor, the Swedish knife series, offers a highly advanced technological solution combined with timeless Swedish design. As the result of a long development process, we are the first company in the world to be able to offer a laminated knife blade in 3G steel, edged with sintered steel, or powder steel. To this edge steel, we have added a resilient, anticorrosive steel which stabilizes the hard centre. This gives a rigid, strong blade that retains its edge extremely well. These knives are in the Swedish minimalist idiom, where form harmonizes with function. The result is an edged implement that the user will find an easy and accommodating knife — a world-beater from Sweden.

Tre Kronor #2
If price and performance are the deciding factors, then TK2 is the hands-down winner. The secure, comfortable grip and the powerful blade in laminated powder steel form a combination whose value is unparalleled in the world. It is a utility knife which one can rely on and which will perform for you through thick and thin. The knives are delivered in ordinary white box.

Specifications:

Steel: 3G HRC 62
Blade length: 3.94" inch / 100 mm
Total length: 8.46” inch / 215 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Thermorun

Blade thickness: 4,5 mm
Knife weight 185 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Full Tang

FOX FX-F2017 40th Anniversary Collectors Folding Knife

- Made by Fox Knives in Italy -

Design by: "Fox Knives".

Introduction:

To celebrate their 40th anniversary, FOX Cutlery, revisited in a modern key their
first folding knives (594 Silver Collection).  Fox-Knives Italy 1977 - 2017.

Specifications:

Steel: M390 stainless steel HRC 56-58
Blade length: 3.35" inch / 85 mm
Total length: 7.48” inch / 190 mm
Handle length: 4.13” inch / 105 mm
Handle scales: Marble carbon fiber

Blade thickness: 3.5 mm
Overall weight 120 gr.

Additional Information:

Blade Coating: Satin

Clip: titanium

Bag: Included

FOX Phoenix FX-531 Ti BL or FX-531 Ti BR - E.D.C Folding Knife

- Made by Fox Knives in Italy -

Design by: "Tashi Bharucha".

Introduction:

Tashi Bharucha:

“I have a couple of things in mind when I design a folder: I try to pack as much blade as possible into the handle, I want the knife to feel great in the hand and to look good.

It should have character. The Phoenix has all those features in one tight little package. Fantastic ergonomics and... a sexy look!”

- Please select your desired version in the selection menu above -

Specifications:

Steel: M390 stainless steel HRC 59-60 
Blade length: 3.35" inch / 85 mm
Total length: 7.87” inch / 200 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Titanium anodized blue / Titanium anodized brown  

Blade thickness: 4 mm
Overall weight 150 gr.

Additional Information:

Blade Coating: Satin

Clip: Titanium

Sheath: Included

FOX Shadow FX-533 CF or FX-533 Ti - Titanium Frame Lock Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bastinelli".

Introduction:

Bastinelli:

“Generally, for all my design, I always try to associate a perfect ergonomics, and a real utility in accordance with the needs of customers, civilians or professionals”.

Specifications:

Steel: Elmax stainless steel HRC 58-60
Blade length: 3.94" inch / 100 mm
Total length: 8.66” inch / 220 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Carbon fiber or Titanium anodized black  

Blade thickness: 4 mm
Overall weight 140 gr.

Additional Information:

Blade Coating: Stone washed / Stone washed PVD

Clip: stainless steel 420J2B

Sheath: Included

Handle: Hole for Safety Cord

PVD
(Physical Vapor Deposition) is a variety of vacuum deposition methods used to deposit thin films by the condensation of a vaporized form of the desired film material onto various workpiece surface. The coating method involves purely physical process such as high temperature vacuum evaporation with subsequent condensation.