3.976inch - 4.331inch

German Böker "Sherman EDC" Folding  Knife

- Made in Solingen / Germany -

Introduction:

The great success of the Boker M4 Sherman Damascus, which is due not only to the history of the historic Damascus steel but also to the design of the modern folder, has prompted us to use this as the basis for a leading and pleasing EDC with a Titanium framelock, which, despite the powder metallurgy of the blade, also carries a genuine piece of M4 Sherman Damascus.

For the blade of the Sherman EDC we have used Magnacut for the first time, which is not without reason being celebrated as a "miracle steel". Unlike the tool steels usually used, this steel was developed specifically for knife making. The three desirable properties of a steel - edge retention, toughness and rust resistance (stainless in the DIN category) - represent a conflict of goals. To make the steel rust-resistant, the addition of chromium is necessary, which makes the structure coarse, brittle and susceptible to fracture under normal conditions. High hardness, which has a positive influence on cutting durability, is usually achieved at the expense of toughness. With Magnacut, despite the high Chromium content of 10.7% and an impressive hardenability of over 62-63 HRC, it has been possible to achieve a very fine microstructure and thus high toughness and shock-load tolerance. The addition of nitrogen plays a central role here. Nitrogen is actually a steel pest in the alloy. However, due to sophisticated heat treatment, among other things, the nitrogen of the Magnacut is integrated into the crystalline lattice structure of the steel structure and thus achieves the otherwise contradictory material properties.

The central structural difference to the M4 Damascus model is the flipper, elegantly integrated into the contours, which allows the blade to slide open smoothly with a small impulse and invites you to play. The ball-bearing blade is opened alternatively by thumb stud and locked by a sturdy Titanium Framelock with stonewash finish. An overdrive stop acts as an over-extension protection for the lock. The milled titanium clip (tip-up/r) with a steel ball as well as the handle scales made of wild Carbon Fibre complete the harmonious overall picture.

A special highlight of the Boker Sherman EDC is the protruding backspacer made of Damascus, which is equipped with a lanyard hole in elongated slotted design. The Damascus of the backspacer was forged from various materials from the production of M4 Sherman tanks by Chad Nichols in the Customized Ladder pattern and is reminiscent of the tank tracks left in the ground by the heavy chains of the M4 Sherman.

Specifications:

Steel: MAGNACUT
Blade length: 2.952“ inch / 75 mm 
Total length: 7.007” inch / 178 mm 
Handle length: 4.055" inch / 103 mm
Handle scales: Carbon / Steel

Blade Thickness: 3,6 mm
Overall weight 95 gr.

FOX CORE "FX-604" or FX-604 BL Folding Knife

- Made by Fox Knives in Italy -

Design by: "Jesper Voxnæs".

* Please request availability *

Introduction:

The Core is a stout folder, light for its size and with a broad blade for hard work.
It is designed to be your go-to folder for getting work done in your shop, in the
outdoors or even out hunting.

The flipper makes fast deployment easy and at the same time you have the option of using the opening hole when wearing thick gloves or in situations where you need to keep a solid grip on your knife while opening it.

Jesper Voxnæs

“My knife designs are obviously with the Nordic lines and feel. A clean functional almost minimalistic expression. All about the function of the tool”

- Please select your desired version in the selection menu above -

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.15" inch / 80 mm
Total length: 7.48” inch / 190 mm
Handle length: 4.33” inch / 110 mm
Handle scales:  FRN® black or FRN® blue

Blade thickness: 4 mm
Overall weight 135 gr.

Additional Information:

Blade Coating: Stone washed 

Clip: wireclip - reversible

Spacer: black/orange anodized aluminum

FOX Core FX-604 B or FX-604 OD Folding Knife

- Made by Fox Knives in Italy -

Design by: "Jesper Voxnæs".

* Please request availability *

Introduction:

The Core is a stout folder, light for its size and with a broad blade for hard work.
It is designed to be your go-to folder for getting work done in your shop, in the
outdoors or even out hunting. The flipper makes fast deployment easy and at the same time you have the option of using the opening hole when wearing thick gloves or in situations where you need to keep a solid grip on your knife while opening it.

Jesper Voxnæs:

“My knife designs are obviously with the Nordic lines and feel. A clean functional almost minimalistic expression. All about the function of the tool”

- Please select your desired version in the selection menu above -

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.15" inch / 80 mm
Total length: 7.48” inch / 190 mm
Handle length: 4.33” inch / 110 mm
Handle scales:  FRN® Black or FRN® OD Green

Blade thickness: 4 mm
Overall weight 135 gr.

Additional Information:

Blade Coating: Cerakote™ black

Clip: wireclip - reversible

Spacer: orange/black anodized aluminum

FOX Elite 273 OL Folding Knife

- Made by Fox Knives in Italy -

Design by: "Fox Knives".

Introduction:

The elegant Elite 273 pocket knife from Fox-Knives impresses not only with its high quality, but also with the balanced price-performance ratio.

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.15" inch / 80 mm
Total length: 7.48” inch / 190 mm
Handle length: 4.33” inch / 110 mm
Handle scales: Olive wood 

Blade thickness: 3 mm
Overall weight 95 gr.

Additional Information:

Box: Included

Blade Coating: Satin

Bolsters: Stainless steel AISI 304

FOX Tur FX-523 OR Folding Knife

- Made by Fox Knives in Italy -

Design by: "Jesper Voxnæs".

Introduction:

Jesper Voxnæs:

“My knife designs are obviously with the Nordic lines and feel. A clean functional almost minimalistic expression. All about the function of the tool”

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 2.95" inch / 75 mm
Total length: 7.09” inch / 180 mm
Handle length: 4.13” inch / 105 mm
Handle scales: G10 orange     

Blade thickness: 3.5 mm
Overall weight 100 gr.

Additional Information:

Blade Coating: Satin

Clip: stainless steel 420J2B

Sheath: Included

FOX Tur FX-520 B - Folding Knife

- Made by Fox Knives in Italy -

Design by: "Jesper Voxnæs".

Introduction:

Jesper Voxnæs:

“My knife designs are obviously with the Nordic lines and feel. A clean functional almost minimalistic expression. All about the function of the tool”

Specifications:

Steel: Elmax stainless steel HRC 58-60 
Blade length: 2.95" inch / 75 mm
Total length: 7.09” inch / 180 mm
Handle length: 4.13” inch / 105 mm
Handle scales: Carbon fiber

Blade thickness: 3.5 mm
Overall weight 95 gr.

Additional Information:

Blade Coating: Physical Vapor Deposition (PVD)

Clip: titanium

Spacer: titanium

Sheath: Included

PVD
(Physical Vapor Deposition) is a variety of vacuum deposition methods used to deposit thin films by the condensation of a vaporized form of the desired film material onto various workpiece surface. The coating method involves purely physical process such as high temperature vacuum evaporation with subsequent condensation.