101mm - 110mm

Boker Damascus Annual Knife 2025 Collectors Knife

- Made in Solingen / Germany -

Pre-Order available: Nov. 10th 2025

Introduction:

Boker Damast Annual Knife 2025, strictly limited to 999 pieces worldwide, electrifies knife nuts all along the line. Exciting, gripping, pulsating - unfiltered enthusiasm with an upward trend! Shaped from tradition, the Damascus Annual Knife cites the Boker TRPPR (pronounced: trapper) as an extraordinary gentleman's folder that carries the spirit of the successful original Trapper into a new era. Although reduced to the essentials, the pocket-knife lacks nothing. The ball-bearing blade made from 100-layer Damascus, hand-forged in the USA by Chad Nichols in the Stainless Meadow pattern, opens silky smoothly with a flipper, while the elegant integral framlock with overtravel stop reliably secures the knife. The hand-flattering titaniumhandle body with its clean look forms a successful contrast to the blade and underlines the guiding principle of contemporary knife culture. Decorative accents are provided by the thermally colored screws, including the pivot screw, where the famous Boker tree mark immediately catches the eye, as well as the titanium clip (tip-up/r) with ball, milled from solid. The Boker Damast Annual Knife 2025 is supplied with a high-quality frame case and certificate of authenticity. Handmade in the Boker Manufactory in Solingen. 

Specifications:

Steel: Damascus
Blade length: 3.188“ inch / 81 mm 
Total length: 7.440” inch / 189 mm
Handle length: 4.251" inch / 108 mm
Handle scales: TITANIUM

Blade Thickness: 2,5 mm
Overall weight 78 gr.

German Boker Scout Bog Oak Damascus knife

Made in Solingen / Germany 

Serial number # 025

*Last available piece*

Introduction:

The Scout has been a firm favourite in the Boker range since 1985. Its success speaks for itself, because even many short-lived trends have not been able to upset the pocket knife with its numerous variants. In this special version, limited to 199 pieces worldwide, the Scout impresses with a Damascus blade hand-forged by Bertie Rietveld in the exciting Dragonskin pattern. The extremely sturdy nickel silver handle body is manufactured using a sintering process and then polished. Beautifully framed are handle scales made from centuries-old bog oak wood, which emphasises the rustic character of the Scout. The blade is opened in the classic way using the nail nick, while the back lock keeps it reliably open. Handmade in the Boker manufactory in Solingen.

Specifications:

Steel: Damascus
Blade length: 3.149“ inch / 80 mm
Total length: 7.244” inch / 184 mm
Handle length: 4.094" inch / 104 mm
Handle scales: Bog Oak / Nickel Silver

Blade Thickness: 3 mm
Overall weight 160 gr.

German Böker "Scout Stag" Pocket Folding Knife

- Made in Solingen / Germany -

Introduction:

The Boker Scout has been firmly connected to our name since 1985. No one can say today if anyone would have expected that the pocket knife would be one of the most successful and popular Knives from our range. But these many years in short-lived fads, that are also not unusual on the knife market, is definitely special. While no other model has had as many versions as the Scout over the years, the basic specifications never changed. The extremely stable body is from a single-piece nickel silverwhich is produced by sintering. The hollow ground blade made of stainless N690 is forged by Böhler and contributes with its memorable shape to the incomparable appearance of the Scout. A classic  Back-lock keeps the blade safely open. When the knife is opened, the spine locks into a notch on the back of the blade. To close the knife, push down the exposed part of the spine. The harmonic overall impression of this classic is completed by pleasantly shaped handle scales made of Stag.

Specifications:

Steel: N690
Blade length: 3.149“ inch / 80 mm
Total length: 7.244” inch / 184 mm
Handle length: 4.094" inch / 104 mm
Handle scales: Stag Horn

Blade Thickness: Not specified
Overall weight 160 gr.

German Böker "Sherman EDC" Folding  Knife

- Made in Solingen / Germany -

Introduction:

The great success of the Boker M4 Sherman Damascus, which is due not only to the history of the historic Damascus steel but also to the design of the modern folder, has prompted us to use this as the basis for a leading and pleasing EDC with a Titanium framelock, which, despite the powder metallurgy of the blade, also carries a genuine piece of M4 Sherman Damascus.

For the blade of the Sherman EDC we have used Magnacut for the first time, which is not without reason being celebrated as a "miracle steel". Unlike the tool steels usually used, this steel was developed specifically for knife making. The three desirable properties of a steel - edge retention, toughness and rust resistance (stainless in the DIN category) - represent a conflict of goals. To make the steel rust-resistant, the addition of chromium is necessary, which makes the structure coarse, brittle and susceptible to fracture under normal conditions. High hardness, which has a positive influence on cutting durability, is usually achieved at the expense of toughness. With Magnacut, despite the high Chromium content of 10.7% and an impressive hardenability of over 62-63 HRC, it has been possible to achieve a very fine microstructure and thus high toughness and shock-load tolerance. The addition of nitrogen plays a central role here. Nitrogen is actually a steel pest in the alloy. However, due to sophisticated heat treatment, among other things, the nitrogen of the Magnacut is integrated into the crystalline lattice structure of the steel structure and thus achieves the otherwise contradictory material properties.

The central structural difference to the M4 Damascus model is the flipper, elegantly integrated into the contours, which allows the blade to slide open smoothly with a small impulse and invites you to play. The ball-bearing blade is opened alternatively by thumb stud and locked by a sturdy Titanium Framelock with stonewash finish. An overdrive stop acts as an over-extension protection for the lock. The milled titanium clip (tip-up/r) with a steel ball as well as the handle scales made of wild Carbon Fibre complete the harmonious overall picture.

A special highlight of the Boker Sherman EDC is the protruding backspacer made of Damascus, which is equipped with a lanyard hole in elongated slotted design. The Damascus of the backspacer was forged from various materials from the production of M4 Sherman tanks by Chad Nichols in the Customized Ladder pattern and is reminiscent of the tank tracks left in the ground by the heavy chains of the M4 Sherman.

Specifications:

Steel: MAGNACUT
Blade length: 2.952“ inch / 75 mm 
Total length: 7.007” inch / 178 mm 
Handle length: 4.055" inch / 103 mm
Handle scales: Carbon / Steel

Blade Thickness: 3,6 mm
Overall weight 95 gr.

German Böker "Trapper" - TRPPR Pocket Folding Knife

- Made in Solingen / Germany -

Introduction:

Discreet in its name - sovereign in appearance. The Boker TRPPR (pronounced: trapper) is an extraordinary gentleman's knife that transfers the spirit of the successful Boker Trapper into a new era. Although reduced to the essentials, the pocket-knife leaves nothing to be desired. The ball-bearing blade made of powder metallurgy Magnacut (62-63 HRC) opens silky smooth via a flipper, while the elegant integral framelock with stainless steel inlay and overtravel stop reliably secures the knife. The blade steel used is characterised above all by high wear resistance, high toughness and high corrosion resistance and is rounded off by an attractive two-tone finish. The long bolster of the titanium handle body reinterprets the nostalgic "Spirit of the times" and shapes the TRPPR with its handle scales made of MICARTA and its unique grain into a new model of contemporary knife culture. Decorative accents are set by the front blade axle screw, which features the famous Boker tree emblem, and the titanium clip (tip-up/r) milled from the solid with a ball. To protect it from dirt and scratches, the Boker TRPPR is supplied with a high-quality felt case. Handmade in the Boker Manufactory in Solingen.

Specifications:

Steel: MagnaCut
Blade length: 3.188“ inch / 81 mm
Total length: 7.440” inch / 189 mm
Handle length: 4.251" inch / 108 mm
Handle scales: Micarta

Blade Thickness: 2,5 mm
Overall weight 70 gr.

Fallkniven HK9L Exclusive Hunting Knife

- Made by Fällkniven -

Introduction:

The HK9 is a hunting knife for the advanced, experienced hunter who knows where to place the blade on the prey. It is also a good all-round knife. The knife feels sturdy in the hand, compact in a way, easy to use, and stable. It does not appear so, but when using the knife you have the feel that it is one of the world’s most advanced hunting knives you have in your hand. If not before, it is noticeable when beginning to cut – the laminated powder steel keeps an edge unbelievably well.

This knife is delivered with a very well made black leather sheath which keeps the knife safely without any snappers. The leather is about 3 mm thick and it has a thick liner along the sewing. Our idea is that the sheath will fit so tight to your belt that you should be able to push/pull the knife from its sheath by using one hand only. Keep the sheath clean and dry, regular shoeshine is OK but not grease because it makes the leather soft!

Specifications:

Steel: 3G HRC 62
Blade length: 3.54" inch / 90 mm
Total length: 7.68” inch / 195 mm
Handle length: 4.13” inch / 105 mm
Handle: Brown Micarta

Blade thickness: 4.5 mm
Knife weight 182 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade Finish: Satin

Fallkniven Next Generation F1L3Gbm Hunting Knife

- Made by Fällkniven -

*Limited Edition*

Introduction:

The Fällkniven F1L3Gbm is an excellent and thoroughly developed hunting knife, which meets all requirements. With this very high-quality hunting knife in the premium class, you fulfill the desire of a real Dream-Knife. Fällkniven has not spared any expense to produce this high-end product. The handle medallion in nickel silver is covered with about 30 my thick layer of 24k gold, usually you use 2-3 my only. Guard, tubular rivet and handle rivets are made in nickel silver on this exquisite full tang knife. The knife comes with an all-black leather sheath in a neat wood gift box.

Specifications:

Steel: 3G HRC 62
Blade length: 3.98" inch / 101 mm
Total length: 8.27” inch / 210 mm
Handle length: 4.29” inch / 109 mm
Handle scales: Black Micarta

Blade thickness: 4,5 mm
Knife weight 197 gr.

Additional Information:

Edge: Convex

Leather Sheath: Included

Handle: Lanyard Hole

Finger Guard: Nickel Silver

Tang: Full Tang

Blade Finish: Satin

Gift Box: Included

FOX Elite Damascus 273 DOL Folding Knife

- Made by Fox Knives in Italy -

Design by: "Fox Knives".

Introduction:

The elegant Elite Damascus 273 pocket knife from Fox-Knives impresses not only with its high quality, but also with the balanced price-performance ratio.

Specifications:

Steel: Damasteel® RWL34 + PMC27 Super Dense Twist™ HRC 58-60 
Blade length: 3.15" inch / 80 mm
Total length: 7.48” inch / 190 mm
Handle length: 4.33” inch / 110 mm
Handle scales: Olive Wood 

Blade thickness: 3 mm
Overall weight 95 gr.

Additional Information:

Box: Included

Blade: Damascus

Bolsters: Stainless steel AISI 304

FOX "FX-525 Ti BL" Terzuola Titanium Frame Lock Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bob Terzuola".

Introduction:

This knife is a “Every Day Carry” designed for daily utility and self defense. It is compact and strongly made with fine materials. Easy to carry with its convenient clip.

Bob Terzuola:

"I always design my knives to be functional but graceful. Utility is always the main factor in my designs as a knife should be perfectly useful and comfortable in a variety of positions and cutting situations”.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.35" inch / 90 mm
Total length: 7.87” inch / 200 mm
Handle length: 4.53” inch / 110 mm
Handle scales: Bead blasted gray titanium  / Anodized blue titanium 

Blade thickness: 3 mm
Overall weight: 3.53 oz / 100 gr.

Additional Information:

Blade: Stone washed

Handle: Hole for Safety Cord

Clip: Anodized titanium

FOX FX-F2017 40th Anniversary Collectors Folding Knife

- Made by Fox Knives in Italy -

Design by: "Fox Knives".

Introduction:

Specifications:

Steel: M390 stainless steel HRC 59-61
Blade length: 3.35" inch / 85 mm
Total length: 7.48” inch / 190 mm
Handle length: 4.13” inch / 105 mm
Handle scales: Marble carbon fiber

Blade thickness: 3.5 mm
Overall weight 120 gr.

Additional Information:

Blade Coating: Satin

Clip: titanium

Bag: Included

FOX FX-F2017 R 40th Anniversary Collectors Folding Knife

- Made by Fox Knives in Italy -

Design by: "Fox Knives".

Introduction:

Specifications:

Steel: M390 stainless steel HRC 59-61
Blade length: 3.35" inch / 85 mm
Total length: 7.48” inch / 190 mm
Handle length: 4.13” inch / 105 mm
Handle scales: Marble carbon fiber

Blade thickness: 3.5 mm
Overall weight 120 gr.

Additional Information:

Blade Coating: Black PVD

Clip: Black PVD titanium
Spacer: Black PVD titanium
Screws: Black PVD titanium

Bag: Included

FOX Radius FX-550 Ti Sandblasted Titanium Pocket Folding Knife

- Winner of 2019 BLADE Show: "Imported Knife of the Year and Overall Knife of the Year".

- Made by Fox Knives in Italy -

Design by: "Denis Simonutti".

Introduction:

The Fox Knife Radius FX-550 Ti is an impressive and remarkable pocket knife. At the 2019 Blade Show in Atlanta, Georgia USA this knife won awards for the best imported knife and Overall Knife of the Year. The Fox Knife Radius is a revolutionary pocket knife. The thumb stud is added to the handle and also functions as a lock. It’s really unique! By pushing the thumb stud you can unlock the knife to make sure you can close it. No one has ever done that.

The blade is made from high-tech Böhler M390 steel. One of the most popular types of steel on the market. It retains its sharpness for a really long time. As such you hardly have to sharpen the knife. So a really cool blade. But what about the handle? It is made from titanium. And the milling work was nicely carried out Subtle grip on specific parts, silver accents simply stunning.

Specifications:

Steel: stainless steel M390 HRC 59-61
Blade length: 2.95" inch / 75 mm
Total length: 7.28” inch / 185 mm
Handle length: 4,33” inch / 110 mm
Handle scales: Sandblasted Titanium

Blade thickness: 4 mm
Overall weight 140 gr.

Additional Information:

FOX Radius FX-550 TiB Pocket Folding Knife

- Winner of 2019 BLADE Show: "Imported Knife of the Year and Overall Knife of the Year".

- Made by Fox Knives in Italy -

Design by: "Denis Simonutti".

Introduction:

The Fox Knives Radius FX-550 TiB is an impressive and remarkable pocket knife. At the 2019 Blade Show in Atlanta, Georgia USA this knife won awards for the best imported knife and Overall Knife of the Year. The Fox Knives Radius is a revolutionary pocket knife. The thumb stud is added to the handle and also functions as a lock. It’s really unique! By pushing the thumb stud you can unlock the knife to make sure you can close it. No one has ever done that.

The blade is made from high-tech Böhler M390 steel. One of the most popular types of steel on the market. It retains its sharpness for a really long time. As such you hardly have to sharpen the knife. So a really cool blade. But what about the handle? It is made from titanium. And the milling work was nicely carried out Subtle grip on specific parts, silver accents simply stunning.

Specifications:

Steel: stainless steel M390 HRC 59-61
Blade length: 2.95" inch / 75 mm
Total length: 7.28” inch / 185 mm
Handle length: 4,33” inch / 110 mm
Handle scales: Titanium Black PVD

Blade thickness: 4 mm
Overall weight 140 gr.

Additional Information:

Specifications:

Steel: Damascus Stainless Steel (RWL34 & PMC27)
Blade length: 3,543” inch / 90 mm
Total length: 7.874” inch /  200 mm
Handle length: 4.330” inch / 110 mm
Handle scales: African Grenadill Wood
Bolster: Nickel Silver
Knife weight 115 gr.

Additional Informations about the steel quality:

The “Stainless Damascus Steel” it´s compound about 130 layers although it can range between 90 and 130 depending on the thickness and production. Using two kind of rapidly solidified powder steels (RWL34-PMC27) welded at a temperature of 1150ºC and at a gas pressure of about 1.000 atmospheres, we get a material hard, durable, heat resistant and the fracture strength thereby increased radically.