4.370inch - 4.724inch

Fallkniven Embla "SK2L" Hunting Knife

- Made by Fällkniven -

Introduction:

The design of this beautiful hunting knife follows the basic principles of Swedish minimalism – that the design should be simple, neat, and functional. To this minimalist foundation, we add our laminated cobalt steel, which is renowned for its ability to take and keep an excellent edge. Of course, the edge is convex, the sharpest / strongest edge construction we know of, and what’s more, the oldest in human history. It can be treated with any kind of furniture polish, gunstock oil, or other liquids containing thinner and linseed oil. A black, low-hanging leather sheath houses the knife when not in use.

Please note:

There can be some variation in pattern and shades on the wooden handles.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 3.94" inch / 100 mm
Total length: 8.35” inch / 212 mm
Handle length: 4.41” inch / 112 mm
Handle scales: Desert Ironwood

Blade thickness: 4,5 mm
Knife weight 164 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather 

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Protruding Broad Tang

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven F1pro10 Pilot Survival Knife

- Made by Fällkniven -

Introduction:

There are basic survival knives, and there are survival knives for the professional. Our original models of the F1, S1 and A1 have provided exceptional service for more than 20 years. And due to their outstanding quality and durability they will continue to perform for many more years. Nevertheless our drive to continually improve our knives has led us to develop the new Pro Series. The Pro Series are survival knives of near-unimaginable quality, durability and performance.

Simply put, a knife is a blade and a handle. To remain strong and stay sharp the knife must be made of high quality materials. But if the claim is made that a knife is “professional” then the knife and its builder has a responsibility to the user to raise the bar far above what is common. The Pro Series truly is professional.

Compared to their predecessors, the Pro series of F1, S1 and A1 differs in the following important areas:

1. The original laminated VG10 steel is upgraded to a laminate cobalt steel (lam. CoS) blade that ensures a durable edge and improved edge retention.
2. The blades are thicker increasing the torsional rigidity so the knives will withstand even greater external forces.
3. The full-length tapered tang is wider and thicker and therefore significantly stronger.
4. The crossguard is now made of stainless steel and permanently welded to the tang.
5. The convex blade edge has been refined to improve its cutting properties.
6. The zytel sheaths are redesigned, more durable, and better suited for the Molle attachment system.

Understandably these knives fall into a higher price category. However, considering the unparalleled quality they are by no means over priced.

A professional survival knife must perform in all weather with no exceptions. The professional survival knife must be comfortable and safe to handle for both fine and rough work in summer heat and winter cold. We at Fallkniven have considered every design aspect of these superb professional survival knifes and we stand behind them with a lifetime warranty on materials and workmanship.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 3.94" inch / 100 mm
Total length: 8.54” inch / 217 mm
Handle length: 4.615” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 5 mm
Knife weight 182 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade Finish: Satin

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven F1z3G Hunting Knife

- Made by Fällkniven -

Introduction:

The Fällkniven F1z3G is an excellent and thoroughly developed hunting knife, which meets all requirements. With this very high-quality hunting and survival knife in the premium class, you fulfill the desire of a real Dream-Knife. Fällkniven has not spared any expense to produce this high-end product. The 3G stainless steel has a Rockwell hardness of HRC 62. The handle was made of non-slip Thermorun. This beautiful hunting knife comes with a Kydex sheath that ensures a secure hold of the knife.

Specifications:

Steel: 3G HRC 62
Blade length: 3.82" inch / 97 mm
Total length: 8.27” inch / 210 mm
Handle length: 4.45” inch / 113 mm
Handle scales: Thermorun

Blade thickness: 4.5 mm
Knife weight 153 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade Finish: Satin

Fallkniven Frey NL4L Hunting Knife (New Steel Quality VG7 Wolf)

- Made by Fällkniven -

Introduction:

Specifications:

Steel: VG7 Wolf HRC 59
Blade length: 5.12" inch / 130 mm
Total length: 9.61” inch / 244 mm
Handle length: 4.49” inch / 114 mm
Handle scales: Leather

Blade thickness: 5 mm
Knife weight 199 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather 

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Protruding Protruding Broad Tang

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven Idun NL5L Hunting Knife

- Made by Fällkniven -

Introduction:

In Norse mythology, Idun was the goddess of fertility, and was responsible for guarding the apples that ensured the gods eternal youth. To many, she was also a symbol of love and rebirth, and in a famous poem she was referred to as the lover of the gods (ása leika). Unlike earlier knife models in the Northern Lights series, the NL5 is a little rounder and softer in form, and therefore an excellent choice as a hunting knife. The straight, fairly generous leather grip gives complete control over the powerful laminated VG10 blade. The NL5L is as attractive as it is effective especially in the hands of the experienced hunter. When it comes to the Northern Light Series nothing has been spared to make this knife as strong, beautiful and comfortable as possible. The knife is a pleasure to look at and a thrill to use.

The 5 mm thick blade itself is plenty strong enough for all reasonable tasks, but with the laminate technology one can expect an additional 20% strength in the form of resistance to bending compared to an non-laminated VG10 blade. The beautiful handle consists of specially selected oxhide that gives a sure and rugged grip. It ages with elegance and as the years pass it acquires an attractive brown patina. The handle is unaffected by oil and solvents and impervious to water. When the oxhide drys out, small cracks on the handle can appear, but they disappear when the knife is put to use again. Fallkniven believes the convex edge to be the ultimate combination of cutting performance and edge strength.

Anyone who knows anything about knife making knows that such an edge can only be made by hand, and that’s why 99.99% of all knives don’t have that kind of edge. Each Northern Lights series knife comes with a high-quality black leather sheath.

Specifications:

Steel: Laminated VG10 HRC 59
Blade length: 3.94" inch / 100 mm
Total length: 8.46” inch / 215 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Leather

Blade thickness: 5 mm
Knife weight 170 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather 

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Protruding Broad Tang

Fallkniven Jarl SK1L Hunting Knife

- Made by Fällkniven -

Introduction:

What distinguishes a Swedish knife?

Perhaps the apparently simple design or maybe providing a good and safe function, all without frills. The classic clean lines discern a philosophy that honours the skill and experience of the mind, where the tool is allowed to play its part but to outshine the one that holds the handle – the perfect combination. Handles of rich curly birch, solid nickel silver fittings and sharp blades of laminate powder steel. The world’s best, in our opinion. Open, low hanging black leather sheath, for easy access.

Please note:

There can be some variation in pattern and shades on the wooden handles.

Specifications:

Steel: 3G HRC 62
Blade length: 3.82" inch / 97 mm
Total length: 8.27” inch / 210 mm
Handle length: 4.45” inch / 113 mm
Handle scales: Curly Birch

Blade thickness: 4,5 mm
Knife weight 138 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather 

Handle: Lanyard Hole

Finger Guard: Nickel Silver

Tang: Protruding Broad Tang

Fallkniven Njord NL3L Hunting Knife

- Made by Fällkniven -

Introduction:

Njord was the god of fertility in the Norse sagas and belonged to the Vanir clan. He was also the god of sailors and fishermen, and the ruler of coasts and beaches. NL3 Njord is a strong, well-balance knife that is a joy to handle. It is hard to find a more attractive all-round knife and its strength of course lies in the laminated VG10 steel. When it comes to the Northern Light Series nothing has been spared to make the knife as strong, beautiful and comfortable as possible. The knife is a pleasure to look at and a thrill to use.

The blade is made out of laminated VG10 steel, where the edge is made of our now renowned VG10 steel and the sides consist of tough, all-stainless 420J2 steel. This combination is good since it brings together all conceivable and desirable properties such as resilience, resistance to torque and edge-durability in a single blade. A 6 mm thick blade in itself would be strong enough for most tasks – with laminate technology one can expect an additional 20% strength in the form of resistance to bending, as compared to an ordinary VG10 blade. The handle consists of specially selected oxhide: sadly a material that is usually overlooked by manufacturers, but which gives a sure and rugged grip. It ages beautifully and as the years pass it acquires an attractive brown patina, and it is unaffected by oil and solvents and impervious to water. Dryness might cause small cracks on the handle but they disappear when the knife is put to use again. We are persisting with the convex edge, since we consider this to be the ultimate combination of cutting performance and edge strength, and of course our NL3 Njord knife features this. Anyone who knows anything about knife making knows that such an edge can only be made by hand, and that’s why 99.99% of all knives don’t have that kind of edge. Each Northern Lights series knife comes with a high-quality black leather sheath.

Specifications:

Steel: Laminated VG10 HRC 59
Blade length: 5.91" inch / 150 mm
Total length: 10.55” inch / 268 mm
Handle length: 4.65” inch / 118 mm
Handle scales: Leather

Blade thickness: 6 mm
Knife weight 266 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather 

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Protruding Protruding Broad Tang

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven Professional Hunter PHKz Hunting Knife

- Made by Fällkniven -

Introduction:

Specifications:

Steel: 3G HRC 62
Blade length: 4.96" inch / 126 mm
Total length: 9.41” inch / 239 mm
Handle length: 4.45 inch / 113mm
Handle scales: Thermorun

Blade thickness: 5 mm
Knife weight 199 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Finger Guard: Stainless Steel

Tang: Protruding Broad Tang

Fallkniven S1pro Survival Knife

- Made by Fällkniven -

Introduction:

S1pro – Laminated CoS steel
There are basic survival knives, and there are survival knives for the professional. Our original models of the F1, S1 and A1 have provided exceptional service for more than 20 years. And due to their outstanding quality and durability they will continue to perform for many more years. Nevertheless our drive to continually improve our knives has led us to develop the new Pro Series. The Pro Series are survival knives of near-unimaginable quality, durability and performance.

We began developing the Pro Series knives back in 2010 and finally five years later, we could offer three amazing Pro Series survival knives that are the new world standard for survival knife performance and manufacturing.

Simply put, a knife is a blade and a handle. To remain strong and stay sharp the knife must be made of high quality materials. But if the claim is made that a knife is “professional” then the knife and its builder has a responsibility to the user to raise the bar far above what is common. The Pro Series truly is professional.

Compared to their predecessors, the Pro series of F1, S1 and A1 differs in the following important areas:

1. The original laminated VG10 steel is upgraded to a laminate cobalt steel (lam. CoS) blade that ensures a durable edge and improved edge retention.
2. The blades are thicker increasing the torsional rigidity so the knives will withstand even greater external forces.
3. The full-length tapered tang is wider and thicker and therefore significantly stronger.
4. The crossguard is now made of stainless steel and permanently welded to the tang.
5. The convex blade edge has been refined to improve its cutting properties.
6. The zytel sheaths are redesigned, more durable, and better suited for the Molle attachment system.

Understandably these knives fall into a higher price category. However, considering the unparalleled quality they are by no means over priced.

A professional survival knife must perform in all weather with no exceptions. The professional survival knife must be comfortable and safe to handle for both fine and rough work in summer heat and winter cold. We at Fallkniven have considered every design aspect of these superb professional survival knifes.

Specifications:

Steel: Laminated Cobalt Steel HRC 60
Blade length: 5.12" inch / 130 mm
Total length: 9.72” inch / 247 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 6 mm
Knife weight 257 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Finger Guard: Stainless Steel

Blade: Satin Finish

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven S1pro10 Survival Knife

- Made by Fällkniven -

Introduction:

This is the standard edition of the S1pro. Only knife, Zytel sheath and our regular 10 year warranty. There are basic survival knives, and there are survival knives for the professional. Our original models of the F1, S1 and A1 have provided exceptional service for more than 20 years. And due to their outstanding quality and durability they will continue to perform for many more years. Nevertheless our drive to continually improve our knives has led us to develop the new Pro Series. The Pro Series are survival knives of near-unimaginable quality, durability and performance. We began developing the Pro Series knives back in 2010 and finally five years later, we could offer three amazing Pro Series survival knives that are the new world standard for survival knife performance and manufacturing. Simply put, a knife is a blade and a handle. To remain strong and stay sharp the knife must be made of high quality materials. But if the claim is made that a knife is “professional” then the knife and its builder has a responsibility to the user to raise the bar far above what is common. The Pro Series truly is professional.

Compared to their predecessors, the Pro series of F1, S1 and A1 differs in the following important areas:

1. The original laminated VG10 steel is upgraded to a laminate cobalt steel (lam. CoS) blade that ensures a durable edge and improved edge retention.
2. The blades are thicker increasing the torsional rigidity so the knives will withstand even greater external forces.
3. The full-length tapered tang is wider and thicker and therefore significantly stronger.
4. The crossguard is now made of stainless steel and permanently welded to the tang.
5. The convex blade edge has been refined to improve its cutting properties.
6. The zytel sheaths are redesigned, more durable, and better suited for the Molle attachment system.

Understandably these knives fall into a higher price category. However, considering the unparalleled quality they are by no means over priced. A professional survival knife must perform in all weather with no exceptions. The professional survival knife must be comfortable and safe to handle for both fine and rough work in summer heat and winter cold. At Fallkniven we have considered every design aspect of these superb professional survival knives.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 5.12" inch / 130 mm
Total length: 9.72” inch / 247 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 6 mm
Knife weight 257 gr.

Blade thickness: 6 mm
Knife weight 257 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Finger Guard: Stainless Steel

Blade: Satin Finish

Laminated CoS: A newly developed high alloy cobalt-special steel

Additional Information:

Edge: Convex

Sheath Included: Zytel

Finger Guard: Stainless Steel

Tang: Full Tang

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven Tre Kronor TK2z Hunting Knife

- Made by Fällkniven -

Introduction:

Tre Kronor, the Swedish knife series, offers a highly advanced technological solution combined with timeless Swedish design. As the result of a long development process, we are the first company in the world to be able to offer a laminated knife blade in 3G steel, edged with sintered steel, or powder steel. To this edge steel, we have added a resilient, anticorrosive steel which stabilizes the hard centre. This gives a rigid, strong blade that retains its edge extremely well. These knives are in the Swedish minimalist idiom, where form harmonizes with function. The result is an edged implement that the user will find an easy and accommodating knife — a world-beater from Sweden.

Tre Kronor #2
If price and performance are the deciding factors, then TK2 is the hands-down winner. The secure, comfortable grip and the powerful blade in laminated powder steel form a combination whose value is unparalleled in the world. It is a utility knife which one can rely on and which will perform for you through thick and thin. The knives are delivered in ordinary white box.

Specifications:

Steel: 3G HRC 62
Blade length: 3.94" inch / 100 mm
Total length: 8.46” inch / 215 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Thermorun

Blade thickness: 4,5 mm
Knife weight 185 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather 

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Full Tang

Fallkniven Tre Kronor TK2z Hunting Knife

- Made by Fällkniven -

Introduction:

Tre Kronor, the Swedish knife series, offers a highly advanced technological solution combined with timeless Swedish design. As the result of a long development process, we are the first company in the world to be able to offer a laminated knife blade in 3G steel, edged with sintered steel, or powder steel. To this edge steel, we have added a resilient, anticorrosive steel which stabilizes the hard centre. This gives a rigid, strong blade that retains its edge extremely well. These knives are in the Swedish minimalist idiom, where form harmonizes with function. The result is an edged implement that the user will find an easy and accommodating knife — a world-beater from Sweden.

Tre Kronor #2
If price and performance are the deciding factors, then TK2 is the hands-down winner. The secure, comfortable grip and the powerful blade in laminated powder steel form a combination whose value is unparalleled in the world. It is a utility knife which one can rely on and which will perform for you through thick and thin. The knives are delivered in ordinary white box.

Specifications:

Steel: 3G HRC 62
Blade length: 3.94" inch / 100 mm
Total length: 8.46” inch / 215 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Thermorun

Blade thickness: 4,5 mm
Knife weight 185 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Full Tang

Fallkniven Tungsten Carbine S1xb  Knife

- Made by Fällkniven -

Introduction:

Your X-knife is the strongest, sharpest and safest stainless steel knife in production. If your life is in danger, you can always rely on your X-knife. It is designed to withstand all the stresses applied by the human hand, which means that it is virtually indestructible. It assumes, however, that you are careful with the knife and that it is used  as intended, namely as a sharp precision tool. A few words about the all-black version: This surface is the hardest we have ever encountered. Although we really tried to wear down the black coating with the toughest, driest curly birch we could find, we never succeeded in getting holes in this extremely hard, durable surface. Still, we cannot guarantee that it will stay for time and eternity, after all, the blade can be ground and certainly a diamond or ceramic stone will bite on the surface.

Also for example a grain of sand can scratch or leave a mark in the coating. The hardness is at 2400 HV (Vickers) or around HRC 83. They have put a lot of energy into designing a safe knife sheath, which is actually where the knife will spend most of its time. The design of the sheath determines the access to the knife, and here we have really put all our efforts in order to get a safe sheath that allows easy access to the knife. The sheath has both a transport lock (the folding bracket with a strap) and a working safety detail that allows the knife to be in place until you decide to use it. It is a bit a belt-and-braces approach, but we like putting safety first – a lost knife is of no use. The transport lock will therefore allow the knife to be fastened tip-up or tip-down on the body or on your equipment without any risk.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 5.20" inch / 132 mm
Total length: 9.80” inch / 249 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 6 mm
Knife weight 290 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Full Tang

Blade: Black Coated

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven Tungsten Carbine S1xbclip Knife

- Made by Fällkniven -

Introduction:

Your X-knife is the strongest, sharpest and safest stainless steel knife in production. If your life is in danger, you can always rely on your X-knife. It is designed to withstand all the stresses applied by the human hand, which means that it is virtually indestructible. It assumes, however, that you are careful with the knife and that it is used  as intended, namely as a sharp precision tool. A few words about the all-black version: This surface is the hardest we have ever encountered. Although we really tried to wear down the black coating with the toughest, driest curly birch we could find, we never succeeded in getting holes in this extremely hard, durable surface. Still, we cannot guarantee that it will stay for time and eternity, after all, the blade can be ground and certainly a diamond or ceramic stone will bite on the surface.

Also for example a grain of sand can scratch or leave a mark in the coating. The hardness is at 2400 HV (Vickers) or around HRC 83. They have put a lot of energy into designing a safe knife sheath, which is actually where the knife will spend most of its time. The design of the sheath determines the access to the knife, and here we have really put all our efforts in order to get a safe sheath that allows easy access to the knife. As an accessory, the knife sheath is available with a stainless clip that allows you to easily carry the knife on your waist belt. The advantages are several – including that you can easily remove and stow your knife. When belt-mounted, the knife will hang vertically, a few centimeters lower than the belt, allowing it to be accessed even if wearing a backpack or long jacket. The sheath has both a transport lock (the folding bracket with a strap) and a working safety detail that allows the knife to be in place until you decide to use it. It is a bit a belt-and-braces approach, but we like putting safety first – a lost knife is of no use. The transport lock will therefore allow the knife to be fastened tip-up or tip-down on the body or on your equipment without any risk.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 5.20" inch / 132 mm
Total length: 9.80” inch / 249 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 6 mm
Knife weight 290 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel with Clip

Handle: Lanyard Hole

Finger Guard: Stainless Steel

Tang: Full Tang

Blade: Black Coated

Laminated CoS: A newly developed high alloy cobalt-special steel

FOX Arditi FX-595 W Dagger

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

Introduction:

In collaboration with Prof. Antonio G. G. Merendoni.
“To celebrate the 100th anniversary of the foundation of the Italian Assault units, I Gloriosi Arditi (1917-2017), FOX has made a reproduction of the first model of dagger supplied to them, keeping the similarity in a current modern version made with quality materials, combining history and excellence of Italian production in honor of the real heroes of the Great War, those who gave birth to the first modern special forces in the world and the first to specialize with the dagger fencing methods for individual combat.”

Prof. Antonio G.G. Merendoni.

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 6.89" inch / 175 mm
Total length: 11.42” inch / 290 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Zircote Wood

Blade thickness: 4 mm
Overall weight 211 gr.

Additional Information:

Blade Coating: Satin

Leather Sheath: Included

Gift Box: Included

FOX Flipper FX-302 or FX-302 ST or FX-302 G10 Folding Knife

- Made by Fox Knives in Italy -

Design by: "Jens Ansø".

Introduction:

The Flipper features a sculpted handle pattern often referred as ‘Ansø texture’.
A very comfortable handle and a curvy utility blade.

Jens Ansø:

“Ansø knives is about beauty, simplicity and purpose driven design”.

- Please select your desired version in the selection menu above -

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.54" inch / 90 mm
Total length: 8.07” inch / 205 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Titanium / Palisander wood / G10 black

Blade thickness: 4 mm
Overall weight 185 gr.

Additional Information:

Blade Coating: Satin / Black Idroglider stone washed

Clip: stainless steel 420J2B

Sheath: Included

Handle: Hole for Safety Cord

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.

FOX Phoenix FX-531 Ti BL or FX-531 Ti BR - E.D.C Folding Knife

- Made by Fox Knives in Italy -

Design by: "Tashi Bharucha".

Introduction:

Tashi Bharucha:

“I have a couple of things in mind when I design a folder: I try to pack as much blade as possible into the handle, I want the knife to feel great in the hand and to look good.

It should have character. The Phoenix has all those features in one tight little package. Fantastic ergonomics and... a sexy look!”

- Please select your desired version in the selection menu above -

Specifications:

Steel: M390 stainless steel HRC 59-60 
Blade length: 3.35" inch / 85 mm
Total length: 7.87” inch / 200 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Titanium anodized blue / Titanium anodized brown  

Blade thickness: 4 mm
Overall weight 150 gr.

Additional Information:

Blade Coating: Satin

Clip: Titanium

Sheath: Included

FOX Shadow FX-533 CF or FX-533 Ti - Titanium Frame Lock Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bastinelli".

Introduction:

Bastinelli:

“Generally, for all my design, I always try to associate a perfect ergonomics, and a real utility in accordance with the needs of customers, civilians or professionals”.

Specifications:

Steel: Elmax stainless steel HRC 58-60
Blade length: 3.94" inch / 100 mm
Total length: 8.66” inch / 220 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Carbon fiber or Titanium anodized black  

Blade thickness: 4 mm
Overall weight 140 gr.

Additional Information:

Blade Coating: Stone washed / Stone washed PVD

Clip: stainless steel 420J2B

Sheath: Included

Handle: Hole for Safety Cord

PVD
(Physical Vapor Deposition) is a variety of vacuum deposition methods used to deposit thin films by the condensation of a vaporized form of the desired film material onto various workpiece surface. The coating method involves purely physical process such as high temperature vacuum evaporation with subsequent condensation.

Steel: Damascus Stainless Steel (RWL34 & PMC27)
Blade length: 4.921” inch / 125 mm
Total length: 10.826” inch /  275 mm
Handle length: 5.905” inch / 150 mm
Handle scales: Stag Horn
Bolster: Nickel Silver
Knife weight 160 gr.

Additional steel informations:

The “Stainless Damascus Steel” it´s compound about 130 layers although it can range between 90 and 130 depending on the thickness and production. Using two kind of rapidly solidified powder steels (RWL34-PMC27) welded at a temperature of 1150ºC and at a gas pressure of about 1.000 atmospheres, we get a material hard, durable, heat resistant and the fracture strength thereby increased radically.

Muela "GL-Series" Damascus Collectors Rosewood Folding Knife

- Handcrafted by Muela in Spain –

Steel: Damascus Stainless Steel (RWL34 & PMC27)
Blade length: 3.740” inch / 95 mm
Total length: 8.464” inch /  215 mm
Handle length: 4.724” inch / 120 mm
Handle scales: Rose Wood
Bolster: Nickel Silver
Knife weight 195 gr.

Additional steel informations:

The “Stainless Damascus Steel” it´s compound about 130 layers although it can range between 90 and 130 depending on the thickness and production. Using two kind of rapidly solidified powder steels (RWL34-PMC27) welded at a temperature of 1150ºC and at a gas pressure of about 1.000 atmospheres, we get a material hard, durable, heat resistant and the fracture strength thereby increased radically.