111mm - 120mm

German Böker "Försternicker" Hunting Stag Knife

- Made in Solingen / Germany

Introduction:

With the Boker Försternicker, we are calling on traditional values, since this vintage version of the Nicker used to be a popular part of our program several decades ago. The slightly wider, curved blade is typical for this design, offering a somewhat larger task profile than the classic pointed hunting knife. The curved spine with subtle thumb grooves add to the comfortable grip and highlight the exclusive design.
The Försternicker is ideal for all outdoor tasks on the hunt, since the sturdy blade with its high flat grind combines stability with excellent cutting properties. The use of modern Böhler N690 for the blade highlights the exceptional practical value thanks to the superior edge retention compared to classic nicker steel. It is also easy to sharpen.
The nickel silver bolster and butt give the Försternicker an excellent grip. The knife is easy to carry in the classic nicker sheath. With scales made from carefully selected stag.

Specifications:

Steel: N690
Blade length: 4.330“ inch / 110 mm
Total length: 8.858” inch / 225 mm
Handle length: 4.527" inch / 115 mm
Handle scales: Stag Horn

Blade Thickness: 4.3 mm
Weight 205 gr.

Additional information about what "Flat Grind" means:

German Böker Hunting Knife "Integral II."

- Made in Solingen / Germany -

Introduction:

The Boker Integral II. is the compact version of the Vollintegral, just as sturdy and die-forged from a single piece of steel. The rugged blade and excellent ergonomics of the handle scales make the knife perfect for hunting tasks and more. The conical tang and hand-ground finger choils highlight the sophisticated craftsmanship and offer a much more comfortable grip. The scales consist of certified imported rosewood, precision-milled to minimize production tolerances. The blade is made from the reliable outdoor material 440C and equipped with a flat grind that offers great stability even for heavy-duty tasks. Comes with a high-quality leather sheath.

Specifications:

Steel: 440C stainless steel
Blade length: 3.937“ inch / 100 mm
Total length: 8.661” inch / 220 mm
Handle length: 4.724” inch / 120 mm
Handle scales: Walnut Wood

Blade Thickness: 4,2 mm
Overall weight 176 gr.

Sheath: Leather

German Böker Hunting Stag Knife "Integral II."

- Made in Solingen / Germany -

Introduction:

The Boker Integral II. is the compact version of the Vollintegral, just as sturdy and die-forged from a single piece of steel. The rugged blade and excellent ergonomics of the handle scales make the knife perfect for hunting tasks and more. The conical tang and hand-ground finger choils highlight the sophisticated craftsmanship and offer a much more comfortable grip. The scales consist of certified imported rosewood, precision-milled to minimize production tolerances. The blade is made from the reliable outdoor material 440C and equipped with a flat grind that offers great stability even for heavy-duty tasks. Comes with a high-quality leather sheath.

Specifications:

Steel: 440C stainless steel
Blade length: 3.937“ inch / 100 mm
Total length: 8.661” inch / 220 mm
Handle length: 4.724” inch / 120 mm
Handle scales: Stag Horn

Blade Thickness: 3,96 mm
Overall weight 208 gr.

Sheath: Leather

German Böker Tiger Damascus Folding Knife

Collector's knife *Serial numbered*

- Made in Solingen / Germany -

Introduction:

The impressive Boker Tiger- Damascus-adds a very special model to our series of pocket knives steeped in history. The collector's knife with a historical past is a real piece of living history and combines high-quality craftsmanship with authentic materials. Known worldwide as the Tiger, the Panzerkampfwagen VI was used by the Wehrmacht from the late summer of 1942. It is considered one of the most famous tanks in history, despite its modest production number of only 1350 units and the resulting low strategic importance. The development of the heavy tank can be traced back to 1937, and series production began in August 1942. Today, there are only seven preserved units, which are exhibited all over the world. Due to the low availability, the so-called Frankentiger was even assembled for this purpose from wreckage parts of different production years.

The tank parts we use come from a Tiger I of the Schwere Panzerabteilung 502, which was destroyed in combat in Latvia in the summer of 1944 in a heavily wooded area near the town of Bauska. Based on the wreckage found at the original excavation site, it was determined that this Tiger was an early to mid-production model. Examination of battle damage to the remains, military records and local historical accounts revealed that this Tiger tank collided with both a Russian T-34 medium tank and an SU-76 anti-tank gun, and was also damaged by a stationary 45-mm anti-tank gun. It is still unclear which of the impacts caused the most damage and sealed the fate of the Tiger. However, as several 76-mm fragments were lodged in the heavy armour, it is assumed that a nearby T-34 landed the decisive hits before it was destroyed 300 metres away, too.

Otto Carius and Albert Kerscher, two of the most successful tank commanders of the Second World War, were attempting to stop the advance of Soviet forces on Riga at the time, with the Schwere Panzerabteilung 502. The division was able to so devastatingly defeat the enemy blockade forces near Tukums that it was able to retreat to the Latvian Courland together with more than 500,000 other soldiers of the Heeresgruppe Nord. There the forces were encircled in the further course of the Soviet advance. The Kurland Cauldron served as a bridgehead and could be supplied by the Kriegsmarine via sea. It withstood six major attacks by Soviet forces until the unconditional surrender on 8 May, 1945.

The straight-edged Boker Tiger-Damascus is equipped with a unique Damascus blade made from the steelof the battle tank destroyed at Bauska. The non-stainless mosaic Damascus is forged for us by hand by Chad Nichols in the Intrepid pattern and is reminiscent of the tank tracks left in the ground by the Tiger's heavy tracks. Unlike conventional Damascus, the production of mosaic Damascus does not create layers, but complex Damascus bars are forged by hand into a mosaic in an elaborate and very complicated process. The ball-bearing blade is opened by a thumb stud and locked by a sturdy steel framelock with a stonewash finish, while a Hinderer lock-stop acts as an over-extension protection for the lock. The overall shape of the knife pays homage to the famous lines of the tank, while the decorative pivot screw is modelled on the main drive sprocket. The slightly contoured handle scales made of burlap Micarta are provided with precisely milled grooves, which are reminiscent of the characteristic surface structure of the Zimmerit coating of German armoured vehicles. With lanyard hole and milled clip (tip-up/r) witt steel ball. Handmade in the Boker Knife Manufactory in Solingen. Supplied with a classy suspended display, a certificate of authenticity and an individual serial number.

Specifications:

Steel: Damascus 
Blade length: 3.346“ inch / 85 mm 
Total length: 7.874” inch / 200 mm
Handle length: 4.527” inch / 115 mm
Handle scales: Micarta

Blade thickness: 4 mm
Overall weight 139 gr.

German Böker "Trench" Knife Grabendolch

- Made in Solingen / Germany -

Introduction:

During the positional war during the First World War and the resulting trench warfare, many of the insufficiently equipped soldiers developed auxiliary weapons, which were manufactured in field forges and workshops on and behind the front. In the course of the battles, however, it became clear that the soldiers' equipment and armament did not meet the requirements of this particular fighting style. In 1915 Boker was therefore commissioned by the Ministry of War to develop a compact combat knife that was ideally suited for precisely this purpose.
The true-to-the-original Boker Trench Knive also has a stainless steel blade made of C75. This carbon steel with an enormous edge retention requires appropriate care today as it did then. The massive stainless steel crossguard, the old official tang stamp on the blade, the local ribbed wood handle and the authentic sheath made of high-quality leather are also part of the original equipment. The knives are marked with a serial number.

Specifications:

Steel: C75 CARBON STEEL
Blade length: 5.669“ inch / 144 mm
Total length: 10.078” inch / 256 mm
Handle length: 4.409" inch / 112 mm
Handle scales: Walnut Wood

Blade Thickness: 3.39 mm
Overall weight 165 gr.

Additional informations about C75 steel:

C75 is a classic non-stainless carbon steel we use for special projects in our manufacture in Solingen. Carbon steel soon develops its typical blue-gray patina that is not a flaw but a natural property of the material.

Fallkniven A1L Survival Knife

- Made by Fällkniven -

Introduction:

A new world standard was set with the Fallkniven A1 through attention to important details including technical design, ergonomics and economy. The Fallkniven A1 surpasses international standards for strength, personal security capabilities, and value for money. The Fallkniven A1 is an all-purpose knife on the larger side designed for heavy duty use. The powerful blade is made of extremely hard and tough laminated VG10 steel, and will withstand the stress of hard use. The knife is superb at chopping as well finer daily cutting tasks thanks to the ergonomic grip. The full tang goes entirely through the handle so you can strike with the end of it without breaking the grip. The sturdy black leather sheath allows you to fasten the knife on your belt or your pack, and even upside down. The Fallkniven A1 is unaffected by water and works equally well in extreme cold and stifling heat.

Specifications:

Steel: Laminated VG10 HRC 59
Blade length: 6.30" inch / 160 mm
Total length: 11.02” inch / 280 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Kraton

Blade thickness: 6 mm
Knife weight 319 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade: Satin Finish

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven A1nz Survival Knife

- Made by Fällkniven -

Introduction:

A new global standard was set with the Fallkniven A1 through attention to important details including technical design, ergonomics and economy. The Fallkniven A1 surpasses international standards for strength, personal security capabilities, and value for money. The Fallkniven A1 is an all-purpose knife on the larger side designed for heavy duty use. The powerful blade is made of extremely hard and tough laminated VG10 steel, and will withstand the stress of hard use. The knife is superb at chopping as well finer daily cutting tasks thanks to the ergonomic grip. The full tang goes entirely through the handle so you can strike with the end of it without breaking the grip. The sturdy black leather sheath allows you to fasten the knife on your belt or your pack, and even upside down. The Fallkniven A1 is unaffected by water and works equally well in extreme cold and stifling heat.

Specifications:

Steel: Laminated VG10 HRC 59
Blade length: 6.30" inch / 160 mm
Total length: 11.02” inch / 280 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Kraton

Blade thickness: 6 mm
Knife weight 319 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade: Satin Finish

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven PXLbm Folding Pocket E.D.C. Knife

- Made by Fällkniven -

Introduction:

PXL is a modern, slightly larger folding knife for daily use (called EDC or every day carry). The adjustable blade is made in a stainless 3G laminated powder steel at a hardness of HRC 62. It gives an edge which will keep its sharpness extremely well. The handle is in stainless steel and indestructible micarta. The safe and strong liner bladelock allows you to open and close the blade using one hand only. PXL comes with a strong, removable clip which offers a safe, fast and comfortable access to the knife.

Specifications:

Steel: 3G HRC 62
Blade length: 3.46" inch / 88 mm
Total length: 7.83” inch / 199 mm
Handle length: 4.37” inch / 111 mm
Handle scales: Black Micarta

Blade thickness: 3.5 mm
Knife weight 182 gr.

Additional Information:

Edge: Flat Ground

Locking: Liner Lock

Handle: Hole for Lanyard

Fallkniven Taiga Forester TF1 Hunting Knife

- Made by Fällkniven -

Introduction:

The Taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. As shown in the design, TF1 is a handmade knife with a handle in the very exclusive desert ironwood (lat. Olneya tesota). What is special about these knives is the very secure plastic sheath where a specially designed locking system ensures that the knife is properly locked when it is placed in the sheath. It works regardless of weather and wind, sand, or snow. These knives are numbered on the blade spine.

Please note:

There can be some variation in patterns and shades on the wooden handles.

Specifications:

Steel: Laminated Cos HRC 60

Blade length: 4.72" inch / 120 mm
Total length: 9.25” inch / 235 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Desert Ironwood

Blade thickness: 5 mm
Knife weight 230 gr.

Here we offer a superb Damascus folding knife handcrafted by Muela in Spain. This very elegant and perfectly finished pocket knife is supplied with finest Rose Wood scales and a Backlock safety mechanism. The bolsters are made of high gloss polished nickel-silver. The stainless Damascus steel blade shows a beautiful damascus pattern, which is rarely found in this combination. The Damascus blade has 130 layers of stainless Damascus (57-62 HRC). You will find further information about this very high quality damask steel down in this knife description. This beautiful Muela collector's knife comes with a certificate and a nice gift box.

Specifications:

Muela Husky-10M.DX Damascus Knife

- Handcrafted in Spain by Muela -

New Muela Husky Damascus full tang collectors knife. The superb leather sheath and storage box belongs to this high end collectors knife.

Specifications:

Steel: Stainless Damascus Damax™ / Hardness: 58-60 HRC
Blade length: 4.330” inch / 110 mm 
Total length: 8.897” inch /  226 mm
Handle length: 4.566” inch / 116 mm
Handle scales: 3D Black Micarta
Blade thickness: 3.5 mm
Knife weight 242 gr.

– Lanyard hole for Safety Cord

German Puma Automesser Hunting Knife

- Made in Solingen / Germany -

Introduction:

The PUMA AUTOMESSER is an ultimate classic with decades of proven universal blade for the strongest demands - from PUMA Solingen.

The PUMA "Automesser" (Car-knife) was created on the basis of the original PUMA "white hunter" back in the 1960's and has the same outstanding features. The blade shape is precisely thought out and effortlessly meets all conceivable requirements. The sturdy tip is robust enough to open cans or pry open crown caps. A hatchet edge is ground into the center of the back of the blade for rough work such as splitting firewood or chopping bones. In addition, the blade has a practical saw tooth in the back of the cutting edge to cut green branches, fish skin or similar material with a firm surface. The "Automesser" is equipped with plum wood scales, which are firmly riveted to the tang that goes fully through the handle. With all these attributes, this classic success model is an innovative knife that has lost absolutely nothing of its relevance.

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 6,102 " inch / 155 mm
Total length: 10-5/8 " inch / 270 mm
Handle length: 4,527 " inch / 115mm
Handle scales: Plum Wood
Blade thickness: 5 mm
Net weight 237 gr.

German PUMA Bowie Hunting Stag Knife

- Made in Solingen / Germany -

Introduction:

The Puma bowie knife is a thoroughbred classic among PUMA knives. The PUMA bowie knife is a medium-weight hunting and working knife, but also a very special model for hobbyists and collectors. The name goes back to the Texan folk hero James Bowie. The American myth lives on at PUMA.

Specifications:

Steel: 440C / 57-60 HRC
Blade length: 6.535” inch / 166 mm
Total length: 11.024” inch / 280 mm
Handle length: 4.488” inch / 114 mm
Handle scales: stag horn
Blade thickness: 4 mm
Overall weight 200 gr.

Additional Information:

– Leather Sheath Included

– Strap Eye for the sheath

– Hand guard

– Aluminum Bolster

– PUMA design

German PUMA Extension Stag Folding Knife

- Made in Solingen / Germany -

Introduction:

German PUMA Olo Hunting Knife

- Made in Solingen / Germany -

Introduction:

Anyone who loves our model 117081 "ben" will also like the new PUMA "olo". The "ben" serving as a model comes from a design by Olaf Zwätz and emerged as the winner of a joint design competition with "Messer Magazin". Now we have also released this shapely knife as an outdoor version with scales made of robust, black Micarta with a red fiber lining. The one-piece blade of the PUMA "olo" is made of stainless high-performance steel CPM S90V (60-62 HRC), the associated belt sheath is made of Kydex and has a detachable belt loop.

Specifications:

Steel / hardness: CPM S90V / 60-62 HRC
Blade length: 3.858” inch / 98 mm 
Total length: 8.267” inch / 210 mm 
Handle length: 4.409” inch / 112 mm
Handle scales: Micarta
Blade thickness: 3 mm
Overall weight 156 gr.

Design: Olaf Zwätz

Additional Information:

– Kydex Sheath Included

German PUMA Saubart Hunting Knife

- Made in Solingen / Germany -

Introduction:

The Puma Saubart knife is a handy and short, yet very powerful knife in full-tang construction for universal use - from PUMA Solingen.

The PUMA “saubart” offers the user many advantages due to the following features:

Sandvik stainless steel 14C28N is used as blade material, which brings it to a Rockwell hardness of 60-62 HRC, which gives the knife a high cutting strength.

The new blade shape, previously tested by hunters, allows the use of the complete cutting surface. In addition, the blade back is provided with a ground phase.

With a blade length of 100 mm and a thickness of 3 mm, the knife is compact and allows practical handling. Thanks to the solid construction, the “saubart” is also very stable.

Hirschhorn was chosen for the handle formwork. Thanks to the pronounced finger grooves in combination with the strong gag made of nickel silver, this high-quality PUMA knife provides a secure grip when working with it.

A brown saddle leather sheath is supplied for safe driving and transport.

Specifications:

Steel: Sandvik 14C28N / 60-62 HRC
Blade length: 3.937” inch / 100 mm
Total length: 8.346” inch / 212 mm
Handle length: 4.409” inch / 112 mm
Handle scales: Staghorn & Pakka Wood
Blade thickness: 3 mm
Overall weight 211 gr.

Additional Information:

– Leather Sheath Included

– Hole for Safety Cord

– Hand guard