111mm - 120mm

Böker Leopard I. Damascus Folding Knife (Limited Edition)

- Made in Solingen / Germany -

Introduction:

The impressive Boker Leopard-Damascus I. is a real piece of living history. The blade is made of high-performance Damascus, forged exclusively for Boker from the gun barrel steel of the German Leopard I battle tank. It has a hardness of 61 to 63 HRC and a high degree of toughness at the same time. The 300-layer Damascus in the Small Pyramids pattern is ideally suited to the hardcoat-anodised handle made of CNC-milled AlMgSi1, which is considerably higher quality than the usual AlMg3 due to the higher silicon proportion. The decorative inlays are made of certified imported Ziricote Wood. With convertible clip (tip-up/tip-down). Delivery with gift box, certificate of authenticity and individual serial number.

Specifications:

Steel: Damascus
Blade length: 3.543“ inch / 90 mm
Total length: 8.267” inch / 210 mm
Handle length: 4.724” inch / 120 mm
Handle scales: Aluminum / Ziricote Wood
Overall weight 120 gr.

Note: We from Dream-Knives have no influence on which serial number we receive from Böker.

German Böker MG-42 Damascus Collector's Dagger

- Made in Solingen / Germany -

Introduction:

With the classically elegant Boker MG-42 Damascus Dagger, the crown of historical Boker Damascus steel projects is provided with yet another jewel. The MG-42 is one of the internationally renowned milestones in weapons technology, thanks above all to its revolutionary production technology at the time with the consistent use of stamped sheet metal parts, exceptional reliability and ease of use, and a cadence that was previously unknown.

Raw materials and production time had increasingly become critical and decisive factors in the course of the war. Therefore, the Army Ordnance Office was looking for a successor to the MG-34, which was already convincing in its function, but took up too much time and material due to its complex production. The new MG was also to serve as a standardised weapon for light, anti-aircraft, airborne and aperture purposes. Since the central task was not to improve the product but to optimise the manufacturing process, a proven specialist in mass production rather than a weapons expert was commissioned with the new design. The choice fell on Werner Gruner, a mechanical engineer at the Johannes Großfuß metal and lacquerware factory. Gruner was presumably assisted in the development by experienced gun designers. The consistent use of sheet metal stampings instead of milled parts and the omission of accurateness in non-functional details made it possible to build a weapon that was even more reliable than its predecessor, while significantly reducing production time and costs. Almost trouble-free function and firing accuracy in all weather conditions, the change of hot-shot barrels within seconds and a cadence of 1,500 rounds per minute (25 rounds/second) established the MG-42's reputation. A brake in the form of additional mass in the breech cavity made it possible to reduce the immense cadence to 700 rounds/minute and thus the ammunition consumption. A roller shutter controlled by a cam made these impressive technical characteristics possible. In a slightly modified form, the MG-42 is still the standard MG of the German armed forces today as MG 3. Rare originals from the Second World War fetch between USD 40,000 and USD 60,000 at Rock Island Auctions.

The steel of the MG-42 is forged by our long-time and experienced partner Chad Nicols into the heart of the dagger, the double-edged blade with a discreet hollow groove on both sides. The chosen Damascus pattern, Low Layer Raindrop (40 layers) is excellently accentuated by the symmetrical profile of the blade.

The dagger's toggle and pommel are made of solid stainless steel. In the pommel, the cooling fins and gas outlets of the recoil amplifier (actually a combined component with the functions of a recoil amplifier, a flash hider and a barrel guide sleeve) were incorporated as a design element. Nevertheless, form followed function here as well, for the grooves increase the grip of the dagger in the reverse grip. The toggle and pommel joinlessly hold the barrel-shaped roll of hornbeam wood, which is automatically centred in the hand by its shape. The dagger is equipped with a high-quality sheath made of dark brown leather with a belt loop and place reinforcement. Supplied with a classy frame case for seemingly floating presentation, certificate of authenticity and individual serial number.

Specifications:

Steel: Damascus (see description)
Blade length: 5.314“ inch / 135 mm 
Total length: 10” inch / 254 mm
Handle length: 4.685" inch / 119 mm
Handle scales: Iron Wood

Blade Thickness: 5 mm
Overall weight 195 gr.

Fallkniven Idun NL5cxL Damascus Collectors Hunting Knife

- Made by Fällkniven -

Introduction:

It is our pleasure to present one of the world’s most advanced hunting knives – NL5cx Idun, with a blade in Cowry X Damascus steel.This is probably the world’s best edge steel, all categories, and definitely one of the most exclusive blades ever made.The edge comprises a powder steel with the following extreme content: C 3%, Cr 20%, Mo 1%, V 0.3% and iron to 100%.

Its hardness is no less than 64 HRC!

PUMA knife of the year 2022 DAMASTEEL SuperClean limited to 50 pieces

German PUMA White Hunter Oryx Edition Hunting Knife

Made in Solingen / Germany -

Introduction:

64 years after the introduction of the famous PUMA white hunter we present an exclusive new version of our classic: The PUMA white hunter Oryx Edition.

Description:

The handles for this knife are made from the horns of the Oryx antelope. The special shape of these horns gives the handles a unique look. The blade shape of our white hunter remains unchanged, but is enhanced by the image of an oryx antelope.

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 155 mm
Total length: 270 mm
Handle length: 115mm
Handle scales: Oryx Horn
Blade thickness: 5 mm
Net weight 230 gr.

German PUMA Waidbesteck Hunting Stag Knife Set (Waidblatt & Nicker)

- Made in Solingen / Germany -

Introduction:

This Puma knife set is probably one of the most famous Puma hunting knives ever. The Puma "Waidbesteck" has proven itself over decades in the hunting business and is very popular with hunters. 

The "Waidbesteck" was already developed in the middle of the last century by OFM Walter Frevert and is still part of the traditional hunting equipment - from PUMA Solingen.

The ultimate equipment for the hunter! The PUMA "waidbesteck" consists of the "waidblatt" (item no. 113588) and the small "jagdnicker" (item no. 113587). The bulky blade of the waidblatt is kept extremely sturdy and is therefore not only well suited for intercepting game but also as a stand-in. Meanwhile, the Jagdnicker is ideal for red work and other cutting tasks in the hunting area.  Both knives feature fiber-backed deer horn handle scales and solid nickel silver fittings. The matching, high-quality combination saddle leather sheath reliably holds the PUMA "waidbesteck".

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 8.543” inch / 217 mm
Total length: 12.992” inch / 330 mm
Handle length: 4.449” inch / 113 mm
Handle scales: Stag horn
Blade thickness: 8 mm
Overall weight 580 gr.

Additional Information:

– Leather Sheath included

– Frevert Design

– Hole for Safety Cord

German PUMA Waidblatt Hunting Knife

- Made in Solingen / Germany -

Introduction:

The "Waidblatt" was already developed in the middle of the last century by Chief Forester Walter Frevert and is one of the classic hunting knives - from PUMA Solingen.

Legends never die, as is well known! The "Frevertsche Waidblatt" by PUMA has been an integral part of traditional hunting equipment for many decades and has not lost its relevance in terms of design and functionality to this day. The bulky blade with a ground phase in the local area is kept extremely stable and is therefore very well suited not only for the interception of game but also as a stand in the hunting ground. The walnut handle scales are underlaid with fiber and the solid nickel silver fittings (parry element and pommel) make this high-quality, classic hunting knife particularly safe to handle. The matching leather belt sheath is equipped with two safety straps.

Specifications:

Waidblatt:

Steel: 1.4116 / 55-57 HRC
Blade length: 8.543” inch / 217 mm
Total length: 12.992” inch / 330 mm
Handle length: 4.449” inch / 113 mm
Handle scales: Walnut Wood
Blade thickness: 8 mm
Overall weight 578 gr.

Additional Information:

– Leather Sheath included

– Frevert Design

– Hole for Safety Cord

German PUMA Waidblatt Hunting Stag Knife

- Made in Solingen / Germany -

Introduction:

This Puma knife is probably one of the most famous Puma hunting knives ever. The Puma "Waidblatt" has proven itself over decades in the hunting business and is very popular with hunters. The "Waidblatt" was already developed in the middle of the last century by chief forester Walter Frevert and belongs to the classic hunting knives - from PUMA Solingen.

Legends never die, as is well known! The "frevertsche waidblatt" from PUMA has been an integral part of traditional hunting equipment for many decades and has not lost its relevance in terms of design and functionality to this day. The bulky blade with a ground phase in the local area is kept extremely stable and is therefore very well suited not only for the interception of game but also as a stand in the hunting ground. The handle scales made of deer horn are underlaid with fiber and the solid nickel silver fittings (parry element and pommel) make this high-quality, classic hunting knife particularly safe to handle. The matching leather belt sheath is equipped with two safety straps incl. push head lock.

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 8.543” inch / 217 mm
Total length: 12.992” inch / 330 mm
Handle length: 4.449” inch / 113 mm
Handle scales: Stag horn
Blade thickness: 8 mm
Overall weight 580 gr.

Additional Information:

– Leather sheath and black wooden storage box are included

– Frevert Design

– Hole for Safety Cord

German PUMA White Hunter "Elephant" Hunting Knife

Made in Solingen / Germany

Introduction:

The PUMA “White Hunter” is an ultimate classic with a universal blade that has been tried and tested for decades to meet the toughest demands - handmade in Solingen.

Developed in 1956 for the East African hunting organization EAPHA, the PUMA “white hunter” quickly became known worldwide as the ultimate outdoor knife and is now regarded as an extremely popular classic. Its blade shape has been carefully thought out and effortlessly meets every conceivable requirement. The sturdy tip is robust enough to open cans or pry open crown caps. A hatchet edge is ground into the middle of the back of the blade for rough work, such as splitting firewood or chopping bones. The blade also has a practical saw tooth at the back of the cutting edge for cutting green branches, fish skin or similar material with a firm surface. The model in this classic version is fitted with elegant scales made of white Elforyn Super Tusk, which are firmly riveted to the tang that runs all the way through the handle. With all these attributes, the original “white hunter” is an innovative knife that is still unrivaled today.

Another highlight of the white hunter Elefant version is the beautiful laser engraving on the blade. The knives are numbered in advance. The numbers are assigned after the order is received. It is therefore not possible to select a serial number. 

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 6,102 " inch / 155 mm
Total length: 10-5/8 " inch / 270 mm
Handle length: 4,527 " inch / 115mm
Handle scales: Elforyn Super Tusk
Blade thickness: 5 mm
Net weight 263 gr.