Your X-knife is the strongest, sharpest and safest stainless steel knife in production. If your life is in danger, you can always rely on your X-knife. It is designed to withstand all the stresses applied by the human hand, which means that it is virtually indestructible. It assumes, however, that you are careful with the knife and that it is used as intended, namely as a sharp precision tool. The basis of the X-knife’s strength lies in the laminated cobalt steel, and also in the well-thought-out construction in which break zones have been eliminated. Together with the hand-shaped convex edge, the X-knife is a concept that beats everything else in the world in terms of safety and comfort. In their usual way, they have put a lot of energy into designing a safe knife sheath, which is actually where the knife will spend most of its time. The design of the sheath determines the access to the knife, and here they have really put all their efforts in order to get a safe sheath that allows easy access to the knife. The sheath has both a transport lock (the folding bracket with a strap) and a working safety detail that allows the knife to be in place until you decide to use it. It is a bit a belt-and-braces approach, but we like putting safety first – a lost knife is of no use. The transport lock will therefore allow the knife to be fastened tip-up or tip-down on the body or on your equipment without any risk. A few words about the all-black version: This surface is the hardest we have ever encountered. Although we really tried to wear down the black coating with the toughest, driest curly birch we could find, we never succeeded in getting holes in this extremely hard, durable surface. Still, we cannot guarantee that it will stay for time and eternity, after all, the blade can be ground and certainly a diamond or ceramic stone will bite on the surface. Also for example a grain of sand can scratch or leave a mark in the coating. The hardness is at 2400 HV (Vickers) or around HRC 83.
Steel: Laminated CoS HRC 60 Blade length: 4.02" inch / 102 mm Total length: 8.66” inch / 220 mm Handle length: 4.64” inch / 118 mm Handle scales: Thermorun
Blade thickness: 5 mm Knife weight 222 gr.
Sheath Included: Zytel
Handle: Lanyard Hole
Tang: Full Tang
Blade: Tungsten Carbine
Laminated CoS: A newly developed high alloy cobalt-special steel
€499,00 EURSale price€439,00 EUR
Save €60,00 EUR
Fallkniven Njord NL3L Hunting Knife
- Made by Fällkniven -
Njord was the god of fertility in the Norse sagas and belonged to the Vanir clan. He was also the god of sailors and fishermen, and the ruler of coasts and beaches. NL3 Njord is a strong, well-balance knife that is a joy to handle. It is hard to find a more attractive all-round knife and its strength of course lies in the laminated VG10 steel. When it comes to the Northern Light Series nothing has been spared to make the knife as strong, beautiful and comfortable as possible. The knife is a pleasure to look at and a thrill to use.
The blade is made out of laminated VG10 steel, where the edge is made of our now renowned VG10 steel and the sides consist of tough, all-stainless 420J2 steel. This combination is good since it brings together all conceivable and desirable properties such as resilience, resistance to torque and edge-durability in a single blade. A 6 mm thick blade in itself would be strong enough for most tasks – with laminate technology one can expect an additional 20% strength in the form of resistance to bending, as compared to an ordinary VG10 blade. The handle consists of specially selected oxhide: sadly a material that is usually overlooked by manufacturers, but which gives a sure and rugged grip. It ages beautifully and as the years pass it acquires an attractive brown patina, and it is unaffected by oil and solvents and impervious to water. Dryness might cause small cracks on the handle but they disappear when the knife is put to use again. We are persisting with the convex edge, since we consider this to be the ultimate combination of cutting performance and edge strength, and of course our NL3 Njord knife features this. Anyone who knows anything about knife making knows that such an edge can only be made by hand, and that’s why 99.99% of all knives don’t have that kind of edge. Each Northern Lights series knife comes with a high-quality black leather sheath.
Steel: Laminated VG10 HRC 59 Blade length: 5.91" inch / 150 mm Total length: 10.55” inch / 268 mm Handle length: 4.65” inch / 118 mm Handle scales: Leather
Blade thickness: 6 mm Knife weight 266 gr.
Sheath Included: Leather
Handle: Lanyard Hole
Finger Guard:Stainless Steel
Tang:Protruding Protruding Broad Tang
VG10: A well known high alloy molybdenum/cobalt steel
€179,00 EURSale price€149,00 EUR
Save €30,00 EUR
Muela Parabellum-17N Tactical Hunting Knife
High quality outdoor knife in tactical garb. The blade is made of X50CrMoV15 stainless steel, while the black Micarta handle gives the fixed knife a touch of lightness. With high quality leather sheath.
Steel: 1.4116 = “MOVA” (X50CrMoV15) - 57-58 HRC Blade length: 6.850” inch / 174 mm Total length: 11.596” inch / 292 mm Handle length: 4.645” inch / 118 mm Handle: Micarta