4.764inch - 5.118inch

Böker Solingen Classic Western Bowie N690 Knife

- Made in Solingen / Germany -

Introduction:

The design of the traditional Boker Bowie was based on original drafts from the early 19th century and equipped with an extremely stable, 6.4 mm thick blade made from N690. The name of the knife goes back to James "Jim" Bowie, the famous pioneer and soldier who is revered as a hero of the Wild West. Contrary to the widely copied Sheffield Bowie, the variations of this outdoor knife resemble the early American Bowie with its s-shaped stainless steel crossguard sporting a finely satinized surface. The exquisite scales of domestic oak lend the Boker Bowie even more authenticity. Comes with a high-quality Western leather sheath in black, design based on the original.

Specifications:

Steel: N690
Blade length: 7.795“ inch / 198 mm
Total length: 12.795” inch / 325 mm
Handle length: 5" inch / 127 mm
Handle scales: Oak Wood

Blade Thickness: 6.4 mm
Overall weight 495 gr.

N690:

The cobalt-alloyed N690 by Böhler (not to be confused with the lower-grade N695!) is a very reliable upper middle-grade steel we use at our Solingen manufacture for a wide variety of projects.

Cudeman 151-H Hunting Knife

- Made by Cudeman in Spain -

Cudeman Hunting Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Molybdenum Steel 54/56 HRC
Blade length: 4.3319” inch / 110 mm
Total length: 9.252” inch /  235 mm
Handle length: 4.921” inch / 125 mm
Handle scales: Black Rubber Handle
Blade thickness: 4 mm
Knife weight 223 gr.

Additional Information:

– Black Leather Sheath included

– Sheath Weight: 82 gr.

– Blade shape: Nesmuk

– Grind: Hollow Grind

– Blade Finish: Satin Finish

– Hole for Safety Cord

Cudeman 155-M or 155-MC Entresierras Bushcraft Hunting Knife

- Made by Cudeman in Spain -

Cudeman Hunting Knife with MOVA blade.

There are two Editions: Standard or Special.

The Special Edition has a luxury sheath with extras.

- Please select your desired version in the selection menu above -

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 6.230” inch / 160 mm
Total length: 11.417” inch / 290 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Black Micarta with Detailed Red Line
Blade thickness: 5 mm
Overall weight 420 gr.

Description:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Clip-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

Standard Edition Sheath Version:

– Black Leather Multi-position Sheath

– Hole for a Safety Cord

– Glass-Breaker

– Sheath weight: 146 gr.

Special Edition Sheath Version:

– Black Leather Multi Position Sheath

– Sheath Weight 304 gr.

– Glass-Breaker

– Hole for a Safety Cord

– Paracord 280 cm

– Firesteel

– Sharpening Stone with Signal Mirror, Ruler (12cm), Compas and Sundial

Cudeman 155-X / 155-XC Entresierras Bushcraft Hunting Knife

- Made by Cudeman in Spain -

Cudeman Hunting Knife with MOVA blade.

There are two Editions: Standard or Special.

The Special Edition has a luxury sheath with extras.

- Please select your desired version in the selection menu above -

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 6.230” inch / 160 mm
Total length: 11.417” inch / 290 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Brown Micarta with Detailed Red Line
Blade thickness: 5 mm
Overall weight 420 gr.

Description:

All versions.

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Clip-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

Standard Edition Sheath Version:

– Brown Leather Multi-position Sheath

– Hole for a Safety Cord

– Glass-Breaker

– Sheath weight: 146 gr.

Special Edition Sheath Version:

– Brown Leather Multi Position Sheath

– Sheath Weight 304 gr.

– Glass-Breaker

– Hole for a Safety Cord

– Paracord 280 cm

– Firesteel

– Sharpening Stone with Signal Mirror, Ruler (12cm), Compas and Sundial

Cudeman 160-F / 160-FC Quercus BS-9 Bushcraft Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman Bushcraft Knife with MOVA blade. This is a serial numbered knife edition. There are two Editions: Standard or Special. The Special Edition has a luxury sheath with extras.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: Molybdenum Vanadium 56/58 HRC
Blade length: 4.921” inch / 125 mm
Total length: 9.843” inch / 250 mm
Handle length: 4.921” inch / 125 mm
Handle scales: Olive Green with Detailed Red Line
Blade thickness: 4.5 mm
Net weight 227 gr.

Additional Information:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Drop-Point

– Grind: Folded Flat

Standard Edition Sheath:

– Hole for a Safety Cord

– Multi-Positioning Sheath

– Pusher in the Handle to make Fire by Friction

– Grind for Finger Thumb

– Hammer

– Brown Leather Sheath

– Sheath weight: 112 gr.

Special Edition Sheath:

– Brown Leather Sheath

– Hole for a Safety Cord

– Multi-Position Sheath

– Paracord 280 cm

– Firesteel

– Pusher in the Handle to make Fire by Friction

– Hammer

– Leather Loop with Accessories

– Sharpening Stone with Signal Mirror, Ruler (12cm), Compas and Sundial

– Sheath Weight 264 gr.

Cudeman 177-H Tornado Tactical Hunting Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman Tactical Hunting Knife with MOVA blade.

This is an excellent full tang knife, which is characterized by its stability and its fabulous price-performance ratio. A black Cordura sheath is also included & belongs to this beautiful tactical knife.

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 5.905” inch / 150mm 
Total length: 11.023” inch / 280 mm 
Handle length: 5.118” inch / 130 mm
Handle scales: Black Rubber
Blade thickness: 5 mm
Net weight 250 gr.

Additional Info:

– Blade shape: Drop-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

– Saw on the Spine

– Ballistic Nylon Sheath

– Hole for a Safety Cord

– Sheath Weight: 130 gr.

Cudeman 177-N Tornado Tactical Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman ALL BLACK Tactical Hunting Knife with MOVA blade.

This is an excellent full tang knife, which is characterized by its stability and its fabulous price-performance ratio. A black Cordura sheath is also included & belongs to this beautiful tactical knife.

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 5.905” inch / 150mm 
Total length: 11.023” inch / 280 mm 
Handle length: 5.118” inch / 130 mm
Handle scales: Black Rubber
Blade thickness: 4.8 mm
Net weight 250 gr.

Additional Info:

– Blade shape: Drop-Point

– Grind: Hollow Grind

– Blade Finish: Black Coated Finish

– Ballistic Nylon Sheath

– Hole for a Safety Cord

– Sheath Weight: 140 gr.

Cudeman 177-P Black Lion Tactical Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman ALL BLACK Tactical Hunting Knife with MOVA blade.

This is an excellent full tang knife, which is characterized by its stability and its fabulous price-performance ratio. A black Cordura sheath is also included & belongs to this beautiful tactical knife.

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 5.905” inch / 150 mm 
Total length: 11.023” inch / 280 mm 
Handle length: 5.118” inch / 130 mm
Handle scales: Black Rubber
Blade thickness: 4,8 mm
Net weight 250 gr.

Additional Info:

– Blade shape: Drop-Point

– Grind: Hollow Grind

– Blade Finish: Black Coated Finish

– Ballistic Nylon Sheath

– Hole for a Safety Cord

– Sheath Weight: 130 gr.

- Blade tip: Double-edged tip

Cudeman 291-M or 291-MC BV-Cadete Bushcraft Hunting Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman Tactical Knife with Böhler blade. There are two Editions: Standard or Special. The Special Edition has a luxury sheath with extras.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: BÖHLER N-695 59/61 HRC
Blade length: 5.906” inch / 150 mm
Total length: 10.827” inch / 275 mm
Handle length: 4.921” inch / 125 mm
Handle scales: Black Micarta with Detailed Red Line
Blade Width: 5 mm
Net weight 346 gr.

Description:

All versions.

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Clip-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

Standard Edition Sheath Version:

– Black Leather

– Hole for a Safety Cord

– Sheath weight: 119 gr.

– Glass-Breaker

– Wire-Breaker

– Jumping on the Spine

– Bullet Opener

Special Edition Sheath Version:

– Black Leather

– Hole for a Safety Cord

– Sheath weight: 266 gr.

– Glass-Breaker

– Wire-Breaker

– Jumping on the Spine

– Bullet Opener

– Paracord 280 cm

– Leather Loop with Accessories

– Sharpening Stone, Signalling Mirror, Ruler (12 cm), Compass and Sundial

Cudeman 291-M-K / BV-Cadete Bushcraft Hunting Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman Tactical Knife with Böhler blade. This is a heavy and very robust full tang outdoor & bushcraft knife, which comes with Kydex sheath.

Specifications:

Steel: BÖHLER N-695 59/60 HRC
Blade length: 5.906” inch / 150 mm
Total length: 10.827” inch / 275 mm
Handle length: 4.921” inch / 125 mm
Handle scales: Black Micarta with Detailed Red Line
Blade Width: 5 mm
Net weight 340 gr.

Description:

All versions.

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Clip-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

– Wire-Breaker

– Jumping on the Spine

– Bullet Opener

Cudeman 291-N or 291-NC or 291-N-K BV Cadete Bushcraft Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman Tactical Knife with Böhler blade.

There are three Editions, Standard, Special or KYDEX.

The Special Edition has a luxury sheath with extras..

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: BÖHLER N-695 59/61 HRC
Blade length: 5.906” inch / 150 mm
Total length: 10.827” inch / 275 mm
Handle length: 4.921” inch / 125 mm
Handle scales: Black Micarta Coated with Detailed Red Line
Blade Width: 5 mm
Net weight 346 gr.

Description:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Clip-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

Standard Edition Sheath Version:

– Black Leather

– Hole for a Safety Cord

– Sheath weight: 119 gr.

– Glass-Breaker

– Wire-Breaker

– Jumping on the Spine

– Bullet Opener

Special Edition Sheath Version:

– Black Leather

– Hole for a Safety Cord

– Sheath weight: 266 gr.

– Glass-Breaker

– Wire-Breaker

– Jumping on the Spine

– Bullet Opener

– Paracord 280 cm

– Leather Loop with Accessories

– Sharpening Stone, Signalling Mirror, Ruler (12 cm), Compass and Sundial

KYDEX Edition Sheath Version:

– Hole for a Safety Cord

– Glass-Breaker

– Wire-Breaker

– Jumping on the Spine

– Bullet Opener

Cudeman 298-G or 298-GC FAB Survival Hunting Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman Survival Knife with Böhler blade. There are two Editions available: Standard Edition or Special Edition. The Special Edition has a luxury sheath with extras.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: BÖHLER N-695 59/61 HRC 
Blade length: 4.331” inch / 110 mm
Total length: 9.252" inch / 235 mm
Handle length: 4.921” inch /  125 mm
Handle scales: Polished Walnut with a Detailed Red Line

Bolsters : Nickel silver
Blade thickness: 0.210” inch / 5.33 mm
Net weight 254 gr.

Standard leather sheath included.

Description:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Drop-Point

– Grind: Full Flat Grind

Standard Edition Sheath:

– Hole for a Safety Cord

– Sheath weight: 188 gr.

Special Edition Sheath:

– Hole for a Safety Cord

– Multi-Position Sheath

– Paracord 280 cm

– Firesteel

– Leather Loop with Accessories

– Sharpening Stone with Signal Mirror, Ruler (12cm), Compas and Sundial

– Sheath Weight 286 gr.

Cudeman 298-K or 298-KC FAB Survival Hunting Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman Survival Knife with Böhler blade.

There are two Editions available: Standard Edition or Special Edition.

The Special Edition has a luxury sheath with extras.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: BÖHLER N-695 59/61 HRC 
Blade length: 4.331” inch / 110 mm
Total length: 9.252" inch / 235 mm
Handle length: 4.921” inch /  125 mm
Handle scales: Cocobolo Wood

Bolsters : Nickel silver
Blade thickness: 0.210” inch / 5.33 mm
Net weight 254 gr.

Standard leather sheath included.

Description:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Drop-Point

– Grind: Full Flat Grind

Standard Edition Sheath:

– Hole for a Safety Cord

– Sheath weight : 188 gr.

Special Edition Sheath:

– Hole for a Safety Cord

– Multi-Position Sheath

– Paracord 280 cm

– Firesteel

– Leather Loop with Accessories

– Sharpening Stone with Signal Mirror, Ruler (12cm), Compas and Sundial

– Sheath Weight 286 gr.

Cudeman 298-KP "Collectors"- Hunting Knife

*Limited Edition of 300 pieces*

- Made by Cudeman in Spain -

Introduction:

Cudeman Survival Knife with Böhler blade.

The serial number is always different.

Specifications:

Steel: BÖHLER N-695 59/61 HRC 
Blade length: 4.331” inch / 110 mm
Total length: 9.252" inch / 235 mm
Handle length: 4.921” inch /  125 mm
Handle scales: Polished Cocobolo Wood

Net weight 254 gr.

Leather sheath included.

Description:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Drop-Point

– Grind: Full Flat Grind

– Hole for a Safety Cord

– Sheath weight : 188 gr.

Cudeman 298-M or 298-MC FAB Survival Hunting Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman Survival Knife with Böhler blade.

There are two Editions available: Standard Edition or Special Edition.

The Special Edition has a luxury sheath with extras.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: BÖHLER N-695 59/61 HRC 
Blade length: 4.331” inch / 110 mm
Total length: 9.252" inch / 235 mm
Handle length: 4.921” inch /  125 mm
Handle scales: Black Micarta with a Detailed Red Line

Bolsters : Nickel silver
Blade thickness: 0.210” inch / 5.33 mm
Net weight 254 gr.

Standard leather sheath included.

Description:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Drop-Point

– Grind: Full Flat Grind

Standard Edition Sheath:

– Hole for a Safety Cord

– Sheath weight: 188 gr.

Special Edition Sheath:

– Hole for a Safety Cord

– Multi-Position Sheath

– Paracord 280 cm

– Firesteel

– Leather Loop with Accessories

– Sharpening Stone with Signal Mirror, Ruler (12cm), Compas and Sundial

– Sheath Weight 286 gr.

Cudeman 328-MF Pocket Folding Knife MT-6

- Made by Cudeman in Spain -

Cudeman Pocket Knife with Böhler blade.

Leather sheath included.

Specifications:

Steel: BÖHLER N-695  59/60 HRC
Blade length: 4.330” inch / 110 mm 
Total length: 9.252” inch / 235 mm
Handle length: 4.921” inch / 125 mm
Handle scales: Black Micarta with Red Spacer
Blade thickness: 2,8 mm
Overall weight 235 gr.

Additional Information:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Drop-Point

– Blade Finish: Satin Finish

– Grind: Hollow Grind

– Bolsters A-304 Stainless Steel

– Locking Mechanism: Liner Lock

– Hole for a Safety Cord

– Glass Breaker

– Thumb Stud

– Multi-Positioning Leather Sheath with Red Thread

Fallkniven A1pro Survival Knife

- Made by Fällkniven -

Introduction:

There are basic survival knives, and there are survival knives for the professional. Our original models of the F1, S1 and A1 have provided exceptional service for more than 20 years. And due to their outstanding quality and durability they will continue to perform for many more years. Nevertheless our drive to continually improve our knives has led us to develop the new Pro Series. The Pro Series are survival knives of near-unimaginable quality, durability and performance. Compared to their predecessors, the Pro series of F1, S1 and A1 differs in the following important areas:

1. The original laminated VG10 steel is upgraded to a laminate cobalt steel (lam. CoS) blade that ensures a durable edge and improved edge retention.
2. The blades are thicker increasing the torsional rigidity so the knives will withstand even greater external forces.
3. The full-length tapered tang is wider and thicker and therefore significantly stronger.
4. The crossguard is now made of stainless steel and permanently welded to the tang.
5. The convex blade edge has been refined to improve its cutting properties.
6. The zytel sheaths are redesigned, more durable, and better suited for the Molle attachment system.

Understandably these knives fall into a higher price category. However, considering the unparalleled quality they are by no means over priced. A professional survival knife must perform in all weather with no exceptions. The professional survival knife must be comfortable and safe to handle for both fine and rough work in summer heat and winter cold. We at Fallkniven have considered every design aspect of these superb professional survival knives and we stand behind them with a lifetime warranty on materials and workmanship.

Steel: Laminated CoS HRC 60
Blade length: 6.30" inch / 160 mm
Total length: 11.14” inch / 283 mm
Handle length: 4.84” inch / 123 mm
Handle scales: Thermorun

Blade thickness: 7 mm
Knife weight 363 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Finger Guard: Stainless Steel

Fallkniven A1xb Tungsten Carbide Knife

- Made by Fällkniven -

Introduction:

Your X-knife is the strongest, sharpest and safest stainless steel knife in production. If your life is in danger, you can always rely on your X-knife. It is designed to withstand all the stresses applied by the human hand, which means that it is virtually indestructible. It assumes, however, that you are careful with the knife and that it is used  as intended, namely as a sharp precision tool. The basis of the X-knife’s strength lies in the laminated cobalt steel, and also in the well-thought-out construction in which break zones have been eliminated. Together with the hand-shaped convex edge, the X-knife is a concept that beats everything else in the world in terms of safety and comfort. About the all-black version: This surface is the hardest we have ever encountered. Although we really tried to wear down the black coating with the toughest, driest curly birch we could find, we never succeeded in getting holes in this extremely hard, durable surface. Still, we cannot guarantee that it will stay for time and eternity, after all, the blade can be ground and certainly a diamond or ceramic stone will bite on the surface. Also for example a grain of sand can scratch or leave a mark in the coating. The hardness is at 2400 HV (Vickers) or around HRC 83.

In their usual way, they have put a lot of energy into designing a safe knife sheath, which is actually where the knife will spend most of its time. The design of the sheath determines the access to the knife, and here they have really put all their efforts in order to get a safe sheath that allows easy access to the knife. The sheath has both a transport lock (the folding bracket with a strap) and a working safety detail that allows the knife to be in place until you decide to use it. It is a bit a belt-and-braces approach, but we like putting safety first – a lost knife is of no use. The transport lock will therefore allow the knife to be fastened tip-up or tip-down on the body or on your equipment without any risk.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 6.34" inch / 161 mm
Total length: 11.18” inch / 284 mm
Handle length: 4.84” inch / 123 mm
Handle scales: Thermorun

Blade thickness: 7 mm
Knife weight 401 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Full Tang

Blade: Tungsten Carbide

Laminated CoS: A newly developed high alloy cobalt-special steel

FOX FKMD Leonida FX-0171106 Military Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

Introduction:

Sheath NYLON 1000D with MOLLE system and FRN (NYLON reinforced fiberglass) plate with wire cutting plate and sharpening stone.

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 7.28" inch / 185 mm
Total length: 12.20” inch / 310 mm
Handle length: 4.92” inch / 125 mm
Handle scales: FORPRENE® OD green

Blade thickness: 5 mm
Overall weight 285 gr.

Additional Information:

Blade Coating: Black Idroglider  

Blade: Partially Serrated Blade with saw on the Spine

Blade: Wire Cutting Plate

Sheath: NYLON 1000D with MOLLE system and FRN ®(NYLON reinforced fiberglass)
with stainless steel wire cutting plate and sharpening stone

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.

FOX FKMD Leonida FX-0171107 Military Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

Introduction:

Sheath NYLON 1000D with MOLLE system and FRN (NYLON reinforced fiberglass) plate with wire cutting plate and sharpening stone.

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 7.28" inch / 185 mm
Total length: 12.20” inch / 310 mm
Handle length: 4.92” inch / 125 mm
Handle scales: FORPRENE® black

Blade thickness: 5 mm
Overall weight 285 gr.

Additional Information:

Blade Coating: Black Idroglider  

Blade: Partially Serrated Blade

Blade: Wire Cutting Plate

Sheath: NYLON 1000D with MOLLE system and FRN ®(NYLON reinforced fiberglass)
with stainless steel wire cutting plate and sharpening stone

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.