91mm - 100mm

FOX FX-801 MK Tool Fixed Blade Knife

- Made by Fox Knives in Italy -

Muela BW-6A Stag Bowie Knife

- Handcrafted in Spain by Muela -

Beautiful smaller Muela Hunting knife. The extraordinarily clean workmanship of stag in any form has always been a special strength of Muela. 

Specifications:

Steel: MOVA 1.4116 X50CrMoV15 / Hardness: 57-58 HRC
Blade length: 2.362” inch / 60 mm 
Total length: 6.299” inch /  160 mm
Handle length: 3.937” inch / 100mm
Handle scale: Staghorn
Blade thickness: 2.6 mm
Knife weight 160 gr.

Additional steel information:

MOVA 1.4116 X50CrMoV15 - Hardness: 57-58 HRC

It´s classic steel used in fixed knives and folding knives. An excellent combination of Molybdenum and Vanadium that is highly stain resistant, though and corrosion resistant.

Muela "Bowie BW-6DAM" Damascus Collectors Hunting Knife

- Handcrafted by Muela in Spain -

Introduction:

Here we offer a beautiful Bowie Damascus Stag knife hand made by "Muela" in Spain. This very sturdy knife is supplied with finest Stag Horn scales.The handle was decorated with beautiful rosewood in addition to the stag. The pommel is made of polished Nickel Silver. The stainless Damascus steel blade shows a beautiful damascus pattern, which is rarely found in this combination. The Damascus blade has 130 layers of stainless Damascus (57-62 HRC). You will find further information about this very high quality damascus steel down in this knife description. This awesome Muela collector's knife comes with a certificate and a nice gift box.

Specifications:

Steel: Damascus Stainless Steel (RWL34 & PMC27)
Blade length: 2.952” inch / 75 mm
Total length: 6.692” inch /  170 mm
Handle length: 3.740” inch / 95 mm
Handle scales: Stag Horn

Knife weight: 65 gr.

Blade thickness: 4 mm

Additional Informations about the steel quality:

The “Stainless Damascus Steel” it´s compound about 130 layers although it can range between 90 and 130 depending on the thickness and production. Using two kind of rapidly solidified powder steels (RWL34-PMC27) welded at a temperature of 1150ºC and at a gas pressure of about 1.000 atmospheres, we get a material hard, durable, heat resistant and the fracture strength thereby increased radically.

Muela Kodiak-10.TH Collectors Bushcraft Knife

This is a very high quality and limited collectors knife made by Muela in Spain.

"60 Anniversary Muela"

This super beautiful and strictly limited Muela hunting knife comes with a storage box & with Muela certification.

In total only 999 pieces of this wonderful hunting knife were made.

Leather Sheath is included.

Specifications:

Steel: Bohler N690
Blade length: 3.937” inch / 100 mm
Total length: 7.874” inch /  200 mm
Handle length: 3.937” inch / 100 mm
Handle scales: Red Maple Root Wood
Knife weight: 191 gr.

– Hole for Safety Cord

(We from Dream-Knives have no influence on which serial number we receive from Muela)

German PUMA Custom Stag Folding Knife

- Made in Solingen / Germany -

Pre-Order available: 

This superb folding knife is ready to ship at May 15th 2025

Introduction:

The Puma Custom has all the features of a traditional pocket knife. A classic back lock ensures safe handling.

Specifications:

Steel: 440A / 55-57 HRC
Blade length: 2.795” inch / 71 mm
Total length: 6.732” inch / 171 mm
Handle length: 3.937” inch / 100 mm
Handle scales: Staghorn
Blade thickness: 3 mm
Overall weight 124 gr.

Additional Information:

– Nickel Silver Bolster

– Back Lock

PUMA Hunter Eiche Hunting Knife With Oak Wood Handle

- Made in Solingen / Germany -

Introduction:

The Puma "Hunter Eiche" looks very similar to its brother Puma Hunters Pal. On the Hunter Eiche, Puma has only equipped the handle scales with oak wood instead of stag horn.

Specifications:

PUMA Hunter's Pal Hunting Knife

- Made in Solingen / Germany -

Introduction:

The PUMA model hunters pal is exactly the right companion for the most diverse tasks that arise for the supply of the game.

Specifications:

German PUMA Jagdmesser Hunting Folding Knife

- Made in Solingen / Germany -

Introduction:

Additional Information:

– Nickel Silver Bolster

– Back Lock

– Cap Lifter

– Double-toothed bonesaw

German PUMA Jagdmesser I. Hunting Folding Knife

- Made in Solingen / Germany -

Pre-order available:

Deliverable from 30th April 2025

Introduction:

A traditional hunting pocket knife from PUMA, for opening small and medium game. Also very suitable for light cutting work. Every hunter should own at least one hunting pocket knife. It is not only used to care for the hunted game, but is also a necessary cutting tool for all sorts of other tasks in the hunting area. The PUMA hunting pocket knife I is a handmade model from Solingen with a spring-loaded lockable blade made of German quality steel according to DIN 1.4110. The handle body has deer horn scales with an embedded engraving plate made of nickel silver.

Specifications:

Steel: 440A / 55-57 HRC
Blade length: 2.992” inch / 76 mm
Total length: 6.693” inch / 170 mm
Handle length: 3.701” inch / 94 mm
Handle scales: Staghorn with engraving plate made of nickel silver
Blade thickness: 3 mm
Overall weight 92 gr.

Additional Information:

– Back Lock

German PUMA Jagdmesser II. Hunting Folding Knife

- Made in Solingen / Germany -

Pre-order available:

Deliverable from 30th April 2025

Introduction:

The Puma Custom has all the features of a traditional pocket knife. This version now equiped with a bonesaw. A cap lifter is integrated into the bonesaw. A classic back lock ensures safe handling.

Specifications:

Steel: 440A / 55-57 HRC
Blade length: 2.992” inch / 76 mm
Bonesaw length: 2.953” inch / 75 mm

Total length: 6.693” inch / 170 mm
Handle length: 3.701” inch / 94 mm
Handle scales: Staghorn with engraving plate made of nickel silver
Blade thickness: 3 mm
Bonesaw thickness: 2 mm

Overall weight 122 gr.

Additional Information:

– Nickel Silver Bolster

– Back Lock

– Cap Lifter

– Double-toothed bonesaw

German PUMA Jagdmesser III. Hunting Folding Knife

- Made in Solingen / Germany -

Pre-order available:

Deliverable from 30th April 2025

Introduction:

The Puma Custom has all the features of a traditional pocket knife. This version now equiped with a bone saw & gutting blade. A cap lifter is integrated into the bonesaw. A classic back lock ensures safe handling.

Specifications:

Steel: 440A / 55-57 HRC
Blade length: 2.992” inch / 76 mm
Bonesaw length: 2.953” inch / 75 mm

Total length: 6.693” inch / 170 mm
Handle length: 3.701” inch / 94 mm
Handle scales: Staghorn with engraving plate made of nickel silver
Blade thickness: 3 mm
Bonesaw thickness: 2 mm

Overall weight 162 gr.

Additional Information:

– Nickel Silver Bolster

– Back Lock

– Cap Lifter

– Double-toothed bonesaw