Over €500

German Böker Eight-Eight (8-8) Flak Damascus Collector's Dagger

- Made in Solingen / Germany -

Introduction:

Boker presents its first military-historical artillery project with the Eight-Eight (8-8) Flak Damascus collector's dagger. The 8.8 cm Flak (short for anti-aircraft gun) is considered by many connoisseurs to be the best and undisputedly most versatile gun of the Second World War. Originally developed for anti-aircraft defence, the Eight-Eight (8-8) established its legendary reputation above all in ground combat.

While anti-tank guns with 3.7 cm to a maximum of 7.5 cm were notoriously under-calibrated for the contemporary armour, anti-aircraft guns regularly had relatively large barrel diameters. It quickly became apparent that only the eight-eight was capable of reliably penetrating the armour of the heavy British Matilda II tank or the Soviet T-34, for example, and above all at greater distances of up to 2,000 metres. The pre-requisite for this was that the barrel of the 8.8 cm anti-aircraft gun could be swivelled to a negative angle of inclination - absolutely untypical for an anti-aircraft gun. This made it possible to lower the barrel below the horizontal plane in order to engage ground targets. The gun could also be swivelled 360° around its vertical axis on a column mount with four cross-shaped outriggers. Another advantage of the eight-eight (8-8) was its speed. On the one hand, this resulted from the short time in which the cross mount could be mounted and dismounted, and the gun could therefore be moved. Another was the high rate of fire. As a semi-automatic cannon with a decelerated barrel recoil, the breech was opened after each shot, the percussion piece cocked, and the empty cartridge ejected. A well-trained operating crew, usually consisting of 9 soldiers, could fire up to 20 rounds per minute. As a result, the German anti-aircraft soldiers were able to shoot down 9 out of 1,000 incoming aircraft.

This figure seems soberingly small, but it is still considered to be the highest firing rate of an anti-aircraft gun in the history of war. The 8.8 cm anti-aircraft gun also played a significant role in the legendary reputation of another weapon of the Second World War, which Boker has already used in a Damascus collector's knife. As the main armament, it was installed in the turret of the VI tank, better known as the Tiger. Proven through this use, it later also became the gun of the Nashorn (Rhino) tank destroyer.

The Eight-Eight (8-8) Flak Damascus project has been realised as a fulyl-fledged dagger with a medieval look. The centrepiece is the slender but massive 18.1 cm long blade forged from parts of the 8.8 cm Flak. The handle scroll is turned from a piece of domestically stabilised hornbeam with 16 jimpings. On closer inspection, the radii and proportions of the 5 mm thick stainless steel parrying piece discreetly form the outline of the cross-guard with side extensions folded up for transport. The silhouette of the folded-out mount is indicated on the base of the solid stainless steel end knob. The dagger is fitted with a dark brown leather sheath with a belt loop and localised reinforcement. Supplied with an elegant storage box, certificate of authenticity and a individual serial number.

Specifications:

Steel: Damascus (see description)
Blade length: 7.204“ inch / 183 mm 
Total length: 12.598” inch / 320 mm
Handle length: 5.393" inch / 137 mm
Handle scales: Iron Wood

Blade Thickness: 6.1 mm
Overall weight 292 gr.

Böker Leopard I. Damascus Folding Knife (Limited Edition)

- Made in Solingen / Germany -

Introduction:

The impressive Boker Leopard-Damascus I. is a real piece of living history. The blade is made of high-performance Damascus, forged exclusively for Boker from the gun barrel steel of the German Leopard I battle tank. It has a hardness of 61 to 63 HRC and a high degree of toughness at the same time. The 300-layer Damascus in the Small Pyramids pattern is ideally suited to the hardcoat-anodised handle made of CNC-milled AlMgSi1, which is considerably higher quality than the usual AlMg3 due to the higher silicon proportion. The decorative inlays are made of certified imported Ziricote Wood. With convertible clip (tip-up/tip-down). Delivery with gift box, certificate of authenticity and individual serial number.

Specifications:

Steel: Damascus
Blade length: 3.543“ inch / 90 mm
Total length: 8.267” inch / 210 mm
Handle length: 4.724” inch / 120 mm
Handle scales: Aluminum / Ziricote Wood
Overall weight 120 gr.

Note: We from Dream-Knives have no influence on which serial number we receive from Böker.

German Böker MG-42 Damascus Collector's Dagger

- Made in Solingen / Germany -

Introduction:

With the classically elegant Boker MG-42 Damascus Dagger, the crown of historical Boker Damascus steel projects is provided with yet another jewel. The MG-42 is one of the internationally renowned milestones in weapons technology, thanks above all to its revolutionary production technology at the time with the consistent use of stamped sheet metal parts, exceptional reliability and ease of use, and a cadence that was previously unknown.

Raw materials and production time had increasingly become critical and decisive factors in the course of the war. Therefore, the Army Ordnance Office was looking for a successor to the MG-34, which was already convincing in its function, but took up too much time and material due to its complex production. The new MG was also to serve as a standardised weapon for light, anti-aircraft, airborne and aperture purposes. Since the central task was not to improve the product but to optimise the manufacturing process, a proven specialist in mass production rather than a weapons expert was commissioned with the new design. The choice fell on Werner Gruner, a mechanical engineer at the Johannes Großfuß metal and lacquerware factory. Gruner was presumably assisted in the development by experienced gun designers. The consistent use of sheet metal stampings instead of milled parts and the omission of accurateness in non-functional details made it possible to build a weapon that was even more reliable than its predecessor, while significantly reducing production time and costs. Almost trouble-free function and firing accuracy in all weather conditions, the change of hot-shot barrels within seconds and a cadence of 1,500 rounds per minute (25 rounds/second) established the MG-42's reputation. A brake in the form of additional mass in the breech cavity made it possible to reduce the immense cadence to 700 rounds/minute and thus the ammunition consumption. A roller shutter controlled by a cam made these impressive technical characteristics possible. In a slightly modified form, the MG-42 is still the standard MG of the German armed forces today as MG 3. Rare originals from the Second World War fetch between USD 40,000 and USD 60,000 at Rock Island Auctions.

The steel of the MG-42 is forged by our long-time and experienced partner Chad Nicols into the heart of the dagger, the double-edged blade with a discreet hollow groove on both sides. The chosen Damascus pattern, Low Layer Raindrop (40 layers) is excellently accentuated by the symmetrical profile of the blade.

The dagger's toggle and pommel are made of solid stainless steel. In the pommel, the cooling fins and gas outlets of the recoil amplifier (actually a combined component with the functions of a recoil amplifier, a flash hider and a barrel guide sleeve) were incorporated as a design element. Nevertheless, form followed function here as well, for the grooves increase the grip of the dagger in the reverse grip. The toggle and pommel joinlessly hold the barrel-shaped roll of hornbeam wood, which is automatically centred in the hand by its shape. The dagger is equipped with a high-quality sheath made of dark brown leather with a belt loop and place reinforcement. Supplied with a classy frame case for seemingly floating presentation, certificate of authenticity and individual serial number.

Specifications:

Steel: Damascus (see description)
Blade length: 5.314“ inch / 135 mm 
Total length: 10” inch / 254 mm
Handle length: 4.685" inch / 119 mm
Handle scales: Iron Wood

Blade Thickness: 5 mm
Overall weight 195 gr.

German Böker P08 Luger Damascus Collector's Boot-Dagger

- Made in Solingen / Germany -

Introduction:

The unique Boker P08-Damascus boot dagger connects the world of knives with historical military history in an inimitable way. The P08, also known as Parabellum Pistol or simply Luger, is still considered legendary today and convinces with highest precision and reliability. The knee-joint lock with short barrel return, developed by Georg Luger, made the pistol 08 incredibly compact and solid. Added to this was the calibre 9 mm Luger (9x19 NATO), also developed by Luger for the new pistol, which was one of the most powerful short firearm calibres at the time and is still the most widely used official calibre in the world today.

It was used as a standard pistol by the German armies in both world wars, but also gained world fame beyond the country's borders in a very short time. As early as 1914, the weapon was used in the armies of Bulgaria, the Netherlands, Portugal and Turkey and was considered a much sought-after prey weapon until the end of the Second World War. The production of the compact pistol required 14 kilogrammes of Steel and its design required such a high degree of precision that completely new demands were made on the production technology. Its unmistakable, almost iconic appearance secured it a firm place in popular culture like no other pistol.

The Boker P08-Damascus not only incorporates various design elements of the unusually aesthetic official weapon, but is also equipped with a unique damascus blade made of the barrel steel of the precise pistol. The remarkable damascus is forged for us by Chad Nichols by hand in the Boomerang pattern. The handle scales of the likewise compactly built boot dagger are made of certified imported rosewood and are reminiscent of the classic, simple checkering of the characteristic pistol grip. The same construction of the retaining screws is used to mount these handle scales as on the P08. And the cone of the exposed barrel is also found in the angle of the handle sides.

The bolsters and end knob are made of steel and are finished with a dark stonewash finish. Supplied with a high quality black leather sheath with a sewn-in ulticlip and can be easily attached thanks to the locking spring clip. Thus the Boker P08-Damascus boot dagger can be pulled effortlessly while the sheath is reliably held in place by the Ulticlip. Handmade in the Boker Knife Manufactory in Solingen. With noble floating display, certificate of authenticity and individual serial number.

Specifications:

Steel: Damascus (see description)
Blade length: 3.228“ inch / 82 mm 
Total length: 6.889” inch / 175 mm
Handle length: 3.661" inch / 93 mm
Handle scales: Rose Wood

Blade Thickness: 3.5 mm
Overall weight 106 gr.

German Böker Tirpitz Damascus GOLD Pocket Knife

Collectors knife *Serial numbered*

Made in Solingen / Germany 

*Pre-order available: Ready to ship at July 10th 2026*

Introduction:

On April 1, 1939, the battleship Tirpitz, named after Fleet Admiral Alfred von Tirpitz, was christened and launched in Wilhelmshaven. To this day, no larger battleship has ever been built in Europe. Eighty years later, Boker presents the Tirpitz-Damast Gold Special Edition as a tribute to remembrance—honoring a continent that endured two World Wars and has lived in peace and freedom since 1945. In memory of the countless victims of these conflicts, and especially the crew of the Tirpitz, €10 from each knife sold is donated to the War Graves Commission. The Tirpitz itself was sunk in 1944 off the coast of Norway. Following the end of the Second World War, a Norwegian salvage company recovered parts of the wreck to repurpose its highly alloyed steel for civilian use. Boker was granted access to selected sections of the ship’s original armor. These authentic fragments of history were entrusted to Boker’s DAMASCUS specialist, who forged them into an extraordinary steel with a story unlike any other. At first glance, the Boker Tirpitz-Damast Gold captivates with its incomparable Damascus blade, exclusively gold-plated for this special edition. The blade consists of 300 layers of hand-forged Tirpitz Damascus in the striking “Great Pyramid” pattern, with the subtle golden sheen lending exceptional depth and brilliance. All key components—including the thumb stud, blade and handle screws, spacers, liners, pocket clip, and replacement clip plate—are likewise gold-plated, creating a harmonious and luxurious appearance. The blade is secured by a 1.5 mm thick liner lock, ensuring reliable operation. A reversible pocket clip allows for both tip-up and tip-down carry. The handle inlay is crafted from locally sourced walnut wood and features the original Tirpitz coat of arms and name, adding a dignified historical accent. Each knife in this limited special edition represents an elegant fusion of history, remembrance, and modern craftsmanship. Completely handcrafted in the Boker Manufactory in Solingen, the knife is delivered in a premium frame display case, complete with an individual serial number and a certificate of authenticity.

Specifications:

Steel: Damascus
Blade length: 3.897“ inch / 99 mm
Total length: 9.015” inch / 229 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Aluminum / Walnut Wood

Blade thickness: 4 mm
Overall weight 180 gr.

German Böker Tirpitz Damascus Pocket Knife

Collectors knife *Serial numbered*

Made in Solingen / Germany 

Introduction:

A piece of history comes to life! The Tirpitz, sister ship of the legendary Bismarck, was the largest battleship ever launched for the German Navy. After the commissioning in February 1941, the Tirpitz soon became a permanent threat for the Western Allies? Navy in the Northern Atlantic. History tells of many attempts to destroy this mighty weapon-loaded colossus. After the Tirpitz was heavily damaged by air attacks from the British Royal Air Force in September 1944, the ship was placed stationary at the Norwegian coast at Tromsö. Once again, the Tirpitz was the primary target for heavy attacks of the Royal Air Force. Then, on November 12. 1944, the Tirpitz was hit by special "Tallboy bombs", which caused the ship to roll over in the shallow water.

Shortly after WW II, a Norwegian specialized company began to explore the wreck and to obtain the high alloy steelfor further civil use. Scientists were very interested in this material as it was used in research and development of measurement technology and even in the astronautics industry. Especially for Boker, Norwegian divers have now retrieved parts of the special armor of the Tirpitz from the Fjord. These pieces of living history are being exclusively forged by our Damascus forger to an extraordinary Damascus Steel with an exciting background. The pattern "Great Pyramids", with more than 300 layers, adorns the mighty 4" blade and makes this piece the highlight of any collection. The combination of the Tirpitz steel and carbon tool steels also creates an extremely rugged Damascus Steelwhich has a hardness of 61 to 63 HRC and can handle any cutting task with ease. The handle, made of high strength AlMgSi1 Aluminum (with Silicium, making it a much higher quality than standard AlMg3), is hardcoat anodized and provides a firm and secure grip. The reversible clip allows for tip-up or tip-down carry. For the handle inlay we chose domestic walnut, which has a long history as shaft wood for German rifles due to its superior characteristics. This eye-catching inlay also features the original Tirpitz crest. This knife combines history, tradition and modern technology in a more than unique way. Comes complete in a presentation box with a certificate of authenticity and is serial numbered.

Specifications:

Steel: Damascus
Blade length: 3.897“ inch / 99 mm
Total length: 9.015” inch / 229 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Aluminum / Walnut Wood

Blade thickness: 3.5 mm
Overall weight 167 gr.

German Böker Tirpitz Damascus Pocket Knife

Collectors knife *Serial numbered*

Made in Solingen / Germany 

Introduction:

The huge interest in our extraordinary collector's knife, the Boker Tirpitz Damascus, has convinced us to design another model featuring this historic damask steel. The Boker Tirpitz Damascus Wood is much flatter, with a thickness of around 10 millimeters, and has a much more elegant design thanks to its continuous scales made of local walnut wood. The matte wood of the contoured handle scales is milled three-dimensionally using CNC technology, and the front proudly displays the Tirpitz coat of arms and lettering.

The sister ship of the legendary Bismarck was the largest battleship ever launched for the German navy. Immediately after the end of World War II, a Norwegian specialist company began salvaging the ship, which had sunk off the Norwegian coast, in order to make the high-alloy steel available for civilian purposes.

Norwegian divers recovered parts of the Tirpitz's special armor from the fjord for Böker. From these pieces of living history, the Böker damask smith exclusively forges an extraordinary damask with a fascinating history. The large pyramid pattern in 300 layers characterizes the powerful blade made of hand-forged Damascus steel and makes the knife a highlight of any knife collection.

The combination of Tirpitz steel with carbon tool steels also results in an extremely durable Damascus steel with a Rockwell hardness of 61 to 63 HRC, which is up to any task in everyday use. The blade is locked in place by a 1.5 mm thick liner lock and opened using the removable thumb stud. With clip (tip-up). The knife is delivered in a high-quality transparent frame box with certificate and serial number.

Specifications:

Steel: Damascus
Blade length: 3.897“ inch / 99 mm
Total length: 9.015” inch / 229 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Walnut Wood

Blade thickness: 4 mm
Overall weight 170 gr.

Fallkniven Idun NL5cxL Damascus Collectors Hunting Knife

- Made by Fällkniven -

Introduction:

It is our pleasure to present one of the world’s most advanced hunting knives – NL5cx Idun, with a blade in Cowry X Damascus steel.This is probably the world’s best edge steel, all categories, and definitely one of the most exclusive blades ever made.The edge comprises a powder steel with the following extreme content: C 3%, Cr 20%, Mo 1%, V 0.3% and iron to 100%.

Its hardness is no less than 64 HRC!

Muela LUPUS-25DAM.C Damascus Luxury Collectors Knife

- Handcrafted by Muela in Spain –

"Damascus steel” of 576 layers.

Introduction:

Here we offer you a real jewel from the knife manufacture Muela for sale.
This is the model "Lupus", which was manufactured exclusively from the finest materials. The breathtaking beauty of this collector's knife can hardly be surpassed, because the harmonious and double-edged blade shape speaks for itself. The handle is made of finest and specially selected staghorn in combination with finest rose wood. The guard element and the grip pommel (wild boar) are made of brass and complete the overall impression of this luxury knife.

Muela's philosophy about their luxury knives:

Without a doubt, among "Manufactures Muela's production, Luxury knives occupy a very special position. Knives for which exclusive designs combine precious metals and woods with exceptional craftmanship. Embossed silver, etchings and enamels, added to various luxury elements, make of this series a superb example of authentic tradition and artisanship of our knives, even including hand-forged Damascus steel blades meeting the undeniable quality standards of the "Knives as jewels" concept and manufactured for these Muela products for many years. Naturally, each individual knife comes in its own specific high quality sheath, in a special presentation box, and accompanied with a certificate accrediting its limited production.

So, this super beautiful Muela hunting knife comes with nice storage box with Muela certification.

Please note:

This Muela luxury collector's knife is made especially for you by Muela after your order. Therefore there is a short waiting time of 15 business days until we are able to ship your order.

Steel quality informations about that superb luxury collectors knife:

Carbon Damascus Steel Blade

“Damascus steel” of 576 layers forged by hand following ancient techniques.

Specifications:

Steel: Carbon Damascus Steel Blade
Blade length: 9.842” inch / 250 mm
Total length: 15.354” inch /  390 mm
Handle length: 5.511” inch / 140 mm
Handle scales: Stag & Rose Wood
Knife weight: 530 gr.

Muela Magnum-23DAM.C Damascus Collectors Knife

- Handcrafted by Muela in Spain –

"Damascus steel” of 576 layers.

Please note:  We can deliver approximately 14-20 days after ordering, because Muela only produces this knife after receiving an order.

Introduction:

Here we offer you a real jewel from the knife manufacture Muela for sale.
This is the model "Magnum", which was manufactured exclusively from the finest materials. The breathtaking beauty of this collector's knife can hardly be surpassed, because the harmonious and beautiful bowie blade speaks for itself. The handle is made of finest and specially selected staghorn in combination with finest rose wood. The guard element and the grip pommel (wild boar) are made of brass and complete the overall impression of this luxury knife.

Muela's philosophy about their luxury knives:

Without a doubt, among "Manufactures Muela's production, Luxury knives occupy a very special position. Knives for which exclusive designs combine precious metals and woods with exceptional craftmanship. Embossed silver, etchings and enamels, added to various luxury elements, make of this series a superb example of authentic tradition and artisanship of our knives, even including hand-forged Damascus steel blades meeting the undeniable quality standards of the "Knives as jewels" concept and manufactured for these Muela products for many years. Naturally, each individual knife comes in its own specific high quality sheath, in a special presentation box, and accompanied with a certificate accrediting its limited production.

So, this super beautiful Muela hunting knife comes with nice storage box with Muela certification.

Steel quality informations about that superb luxury collectors knife:

Carbon Damascus Steel Blade

“Damascus steel” of 576 layers forged by hand following ancient techniques.

Specifications:

Steel: Carbon Damascus Steel Blade
Blade length: 9.055” inch / 230 mm
Total length: 14.566” inch /  390 mm
Handle length: 5.511” inch / 140 mm
Handle scales: Stag & Rose Wood
Knife weight: 445 gr.

Blade thickness: 4.5 mm

PUMA knife of the year 2022 DAMASTEEL SuperClean limited to 50 pieces

German PUMA White Hunter Mammoth Tooth Edition Knife 

- Handcrafted in Solingen / Germany -

*Limited Edition of 70 pieces*

Introduction:

PUMA White Hunter Mammoth Edition – 70 Years of the White Hunter

70 years of the White Hunter. 70 units. An extraordinary piece of PUMA history.

To mark the 70th anniversary of the legendary PUMA White Hunter, we present an edition that combines tradition, Solingen craftsmanship, and the unique allure of a rare natural material: the PUMA White Hunter Mammoth Edition.

• We from Dream-Knives have no influence of the available serial numbers - 

• There are only a very few pieces available.

The White Hunter was originally developed in 1956 for the East African Professional Hunters' Association (EAPHA). From the outset, it was designed as a reliable, all-purpose knife for demanding hunting and outdoor applications. Its distinctive blade shape combines a robust tip, a versatile cutting edge, and a serrated section. This combination made the White Hunter one of the most famous hunting knives of its time—and a classic that has lost none of its appeal to this day.

The Mammoth Edition continues this legacy in a particularly exclusive form. Each of the just 70 numbered units features handle scales made from selected mammoth tooth. The unique structure and coloration make every knife a distinctive, one-of-a-kind piece. A stylized laser-engraved mammoth on the blade underscores the character of this extraordinary anniversary edition.

Sophisticated Handle Construction:

Beneath the mammoth tooth handle scales lies an elegant black vulcanized fiber inlay. This creates a clear visual contrast and ensures a high-quality, harmonious transition between the materials.

The mammoth tooth handle scales are permanently bonded using a high-performance two-component adhesive. Additionally, the handle is mechanically secured with concealed rivets. This creates a strong, durable connection while allowing the exterior of the handle to retain its clean, uninterrupted aesthetic.

The knife is manufactured in Solingen. Its robust construction, stainless 1.4116 steel, and proven White Hunter geometry make it a high-quality companion for hunters, outdoor enthusiasts, and collectors alike. At the same time, this edition represents a tangible piece of PUMA’s brand history—created to be used, preserved, and passed down.

An edition for connoisseurs:

    Limited to just 70 pieces to mark the 70th anniversary of the White Hunter

    Custom handle scales made from genuine mammoth tooth

    Black vulcanized fiber inlay

    High-performance two-component adhesive and additional concealed rivets

    Laser-engraved mammoth motif on the blade

    Classic aluminum guard

    Includes certificate of authenticity and brown saddle leather sheath

    Delivered in a high-quality wooden box

    Handcrafted in Solingen, Germany

Technical specifications:

    Blade length: 6.102" inch / approx. 155 mm

    Blade thickness: 5 mm

    Total length: 10.629" inch / approx. 270 mm

    Knife weight: 263 g

    Blade steel: Stainless 1.4116 steel

    Hardness: 55–57 HRC

    Blade shape: Versatile blade featuring a hatchet-style edge, sturdy tip, and serrations

    Handle scales: Mammoth tooth

    Inlay: Black vulcanized fiber

    Handle attachment: High-performance two-component adhesive and concealed rivets

    Guard: Aluminum

    Sheath: Brown saddle leather

    Scope of delivery: Knife, saddle leather sheath, wooden box, and certificate of authenticity

    Origin: Made in Germany – PUMA Solingen

Important note: Mammoth tooth is a natural material. Variations in color, grain, and texture are characteristic and make each piece unique. The images may therefore differ from the knife supplied.