Over €500

Böker Solingen "Boxer" Damascus Folding Collectors Knife

- Made in Solingen / Germany -

Introduction:

The Boker Boxer, designed by Raphaël Durand from Thiers, is a classic two-handed knife that is extremely popular. In this particularly noble version, the traditional pocket knife is equipped with a dark blade of Dragonskin Damascus by Bertie Rietveld, which is hardened to 58 HRC. The South African custom knifemaker is considered the country's first Damascus smith and has been forging high-performance Damascus with unusual patterns since 1991. The blade is locked by a sturdy backlock and has a generous ricasso. The decorative stainless steel bolsters bear the groove typical of Raphaël Durand. The handle scales are made of polished red burlap Micarta and are very comfortable to hold. The handy size is the perfect compromise between pocket suitability and versatility in use. With reinforced Lanyard-Hole. Handmade in the Boker knife manufactory Solingen. Delivery with individual serial number in a noble floating display with certificate of authenticity.

Specifications:

Steel: Damascus
Blade length: 2.952“ inch / 75 mm
Total length: 7.204” inch / 183 mm
Handle length: 4.251” inch / 108 mm
Handle scales: Brwon Micarta / Stainless Steel

Blade thickness: 3 mm
Overall weight 121 gr.

Böker Leopard I. Damascus Folding Knife (Limited Edition)

- Made in Solingen / Germany -

Introduction:

The impressive Boker Leopard-Damascus I. is a real piece of living history. The blade is made of high-performance Damascus, forged exclusively for Boker from the gun barrel steel of the German Leopard I battle tank. It has a hardness of 61 to 63 HRC and a high degree of toughness at the same time. The 300-layer Damascus in the Small Pyramids pattern is ideally suited to the hardcoat-anodised handle made of CNC-milled AlMgSi1, which is considerably higher quality than the usual AlMg3 due to the higher silicon proportion. The decorative inlays are made of certified imported Ziricote Wood. With convertible clip (tip-up/tip-down). Delivery with gift box, certificate of authenticity and individual serial number.

Specifications:

Steel: Damascus
Blade length: 3.543“ inch / 90 mm
Total length: 8.267” inch / 210 mm
Handle length: 4.724” inch / 120 mm
Handle scales: Aluminum / Ziricote Wood
Overall weight 120 gr.

Note: We from Dream-Knives have no influence on which serial number we receive from Böker.

German Böker "Siwss Army Mosaic Damascus Dagger"

- Made in Solingen / Germany -

Introduction:

As early as the 15th and 16th centuries, the Swiss dagger was used as a common weapon by Swiss pikemen and, due to its blade length, often occupied a middle position between dagger and sword. The dagger, also known as a baselard, usually served as a secondary weapon and was usually not issued as equipment, but had to be procured privately by the soldiers.

The extraordinary Twisted Damascus is now followed by the Mosaic Damascus, which is also very complex to manufacture. It is one of the royal class of Damascus forging and makes the impressive dagger an absolute highlight in every knife collection. In contrast to conventional Damascus, no layers are produced in the manufacture of Mosaic Damascus. Instead, complex Damascus bars are forged by hand into a mosaic in an elaborate and very complicated process. To do this, the Damascus package, which initially consists of stacked layers, is cut up and reassembled in a staggered manner to create a unique mosaic pattern at the end faces of the bar. The DAMASCUS is then cut up again and the complex process is repeated several times, the resulting pattern becoming finer and more unique with each step. Finally, the individual packages are stacked and forged in the shape of a square so that the ends of the individual pieces form a new surface. Forging temperature, forming, deformation rate and the previous steps must be optimally coordinated. This extremely demanding forging process, which only few DAMASCUS smiths master, is carried out to perfection for our Swiss dagger by Chad Nichols.

The dagger blade, sharpened and pointed on both sides, already had a diamond-shaped cross-section in historical models, because this construction proved to be extremely stable and effective. Characteristic of the Swiss Dagger is the design of the pommel and the crossguard. The unusual, curved design can be traced back to the early 13th century and can also be found in the authentic design of our hand-made edition. The shimmering dark handle made of hand-picked certified imported EBONY is bordered by the highly polished pommel and the crossguard and forms a perfect unit with the fine blade.

The leather sheath, specially designed and handsewn for this model, underlines the exclusivity of this coveted collector‘s item. It is delivered with an individual serial number in a noble wooden box and with a certificate of authenticity. Handmade in the Boker Knife Manufactory Solingen and strictly limited to 500 pieces worldwide.

Specifications:

Steel: Damascus (see description)
Blade length: 8.622“ inch / 219 mm
Total length: 14.173” inch / 360 mm
Handle length: 5.551" inch / 141 mm
Handle scales: Ebony Wood

Blade Thickness: 5 mm
Overall weight 256 gr.

German Böker Tirpitz Damascus Pocket Knife

Collectors knife *Serial numbered*

Made in Solingen / Germany 

Introduction:

A piece of history comes to life! The Tirpitz, sister ship of the legendary Bismarck, was the largest battleship ever launched for the German Navy. After the commissioning in February 1941, the Tirpitz soon became a permanent threat for the Western Allies? Navy in the Northern Atlantic. History tells of many attempts to destroy this mighty weapon-loaded colossus. After the Tirpitz was heavily damaged by air attacks from the British Royal Air Force in September 1944, the ship was placed stationary at the Norwegian coast at Tromsö. Once again, the Tirpitz was the primary target for heavy attacks of the Royal Air Force. Then, on November 12. 1944, the Tirpitz was hit by special "Tallboy bombs", which caused the ship to roll over in the shallow water.

Shortly after WW II, a Norwegian specialized company began to explore the wreck and to obtain the high alloy steelfor further civil use. Scientists were very interested in this material as it was used in research and development of measurement technology and even in the astronautics industry. Especially for Boker, Norwegian divers have now retrieved parts of the special armor of the Tirpitz from the Fjord. These pieces of living history are being exclusively forged by our Damascus forger to an extraordinary Damascus Steel with an exciting background. The pattern "Great Pyramids", with more than 300 layers, adorns the mighty 4" blade and makes this piece the highlight of any collection. The combination of the Tirpitz steel and carbon tool steels also creates an extremely rugged Damascus Steelwhich has a hardness of 61 to 63 HRC and can handle any cutting task with ease. The handle, made of high strength AlMgSi1 Aluminum (with Silicium, making it a much higher quality than standard AlMg3), is hardcoat anodized and provides a firm and secure grip. The reversible clip allows for tip-up or tip-down carry. For the handle inlay we chose domestic walnut, which has a long history as shaft wood for German rifles due to its superior characteristics. This eye-catching inlay also features the original Tirpitz crest. This knife combines history, tradition and modern technology in a more than unique way. Comes complete in a presentation box with a certificate of authenticity and is serial numbered.

Specifications:

Steel: Damascus
Blade length: 3.897“ inch / 99 mm
Total length: 9.015” inch / 229 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Aluminum / Walnut Wood

Blade thickness: 3.5 mm
Overall weight 167 gr.

Muela Agarre Luxury Collectors Hunting Knife 

Introduction:

The "AGARRE de Deluxe" is a limited and numbered edition of 250 pieces.

It is a finishing knife, it honors the cast of the same name in the hunt, when the dogs catch up and hold the prey. It is precisely the scene that, beautifully carved, is shown in relief on the guard, in sterling silver.

With a magnificent blade in stainless steel. MoVa with double edge, dagger type, and with a hilt in deer horn from the quarrying, topped with pommel with detail, also in silver, of holm oak leaves.

It comes with an opulent embossed leather sheath of the highest quality, which is at the height of such an extraordinary piece.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This knife will only be made to order and the delivery time will be longer than estimated. Please contact us for the estimated delivery time: 

info@dream-knives.com

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Specifications:

Steel: 1.4116 = “MOVA”  (X50CrMoV15) - 57-58 HRC
Blade length: 10.433” inch / 265 mm 
Total length: 16.732” inch /  425 mm
Handle length: 6.299” inch / 160 mm
Handle: Crown Staghorn

Blade thickness: 4 mm

Knife Weight: 670 gr.

Muela African Big Five "Buffalo" Hunting Knife

 - Handcrafted in Spain by Muela -

*Please note the delivery time for this collector knife is 4 weeks after your order, because this knife is hand crafted especially for you*

Introduction:

Here we offer one of the African BIG FIVE Series from Muela for sale. This is the model "Buffalo". The sculptures reveal unquestionable art and know how. They are smellted in STERLING SILVER and complement other none the less attractive details in fine GOLD. The blade of the knife dedicated to the buffalo is an impressive double edge piece, with a lanceolate profile. The observe has been laser beam engraved with the allegory to the "Great African Bull". On the reverse, there is the name of the collection, as well as the emblem of the Muela African Safari Series. The high quality leather sheath of the Buffalo knife is complemented with a piece of Crocodile leather. Each BIG FIVE collectors knife, comes in a beautiful wooden presentation box & certification.

Specifications:

Steel: 1.4116 = “MOVA”  (X50CrMoV15)
Blade length: 9.448” inch / 240 mm
Total length: 15.748” inch /  400 mm
Handle length: 6.299” inch / 160 mm
Handle scales: Staghorn

Fittings: Sterling Silver
Knife weight: 632 gr.

Steel quality informations:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Muela African Big Five "Elephant" Hunting Knife

 - Handcrafted in Spain by Muela -

*Please note the delivery time for this collector knife is 4 weeks after your order, because this knife is hand crafted especially for you*

Introduction:

We are proudly present the African BIG FIVE Series from Muela for sale. This is the model "Elephant". The image speaks values of the quality of the sculptures of the different animals honoured in this collection. Manufacture Muela will only make 150 pieces for each model in this collection. The "Masai" traditional shield and the plaque on which the serial number, whereby both pieces are in GOLD. The awsome sheath of the elephant knife includes a piece of exotic , African leather, such as the ostrich. The knife dedicated to the largestland animal has an impressive curved counter blade. Each handle is made of red deer stag, carfully selected in terms of shape, dimensions and quality. Each BIG FIVE collectors knife, comes in a beautiful wooden presentation box & certification.

Specifications:

Steel: 1.4116 = “MOVA”  (X50CrMoV15)
Blade length: 8.858” inch / 225 mm
Total length: 15.551” inch /  395 mm
Handle length: 6.692” inch / 170 mm
Handle scales: Staghorn

Fittings: Sterling Silver
Knife weight: 668 gr.

Steel quality informations:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Muela African Big Five "Leopard" Hunting Knife

 - Handcrafted in Spain by Muela -

*Please note the delivery time for this collector knife is 4 weeks after your order, because this knife is hand crafted especially for you*

Introduction:

We are proudly present the African BIG FIVE Series from Muela for sale. This is the model "Leopard". The image of a Muela knife emerges from the red deer stag handle and the double edge blade. Object "Of Hunting & Art" in which the figure of the Leopard can also be highlighted; The cat whose danger has earned itself a place among "BIG FIVE"! Details of the STERLING SILVER guard of the "Leopard", and the corresponding covers applied to the blade using laser engraving. This "Big Five" edition is included in the African Safari Series, which was launched in 2012, with the knife dedicated to "Kudu". Perhaps these knives, true collector's piece Hill remain in display cabinets, but if anybody wants to use them "for hunting", they are not goimg to be disappointed. The sheath of this model also included a crocodile piece, which highlights its attractiveness and exclusivity. It's rim has been conveniently in the shape of the guard. Each BIG FIVE collectors knife, comes in a beautiful wooden presentation box & certification.

Specifications:

Steel: 1.4116 = “MOVA”  (X50CrMoV15)
Blade length: 9.448” inch / 240 mm
Total length: 15.748” inch /  400 mm
Handle length: 6.299” inch / 160 mm
Handle scales: Staghorn

Fittings: Sterling Silver
Knife weight: 557 gr.

Steel quality informations:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Muela  Covarsí-C.TH Anniversary 30 Years Limited Collectors Knife

- Handcrafted by Muela in Spain –

Introduction:

"30 Anniversary" Numbered and limited Edition of 250 units (only !).

It has been 30 years since Manufacturas Muela incorporated the model COVARSÍ into its knife catalog.  Our knife CORVASÍ, was designed in honor of D. Antonio Corvasí (1848 - 1937), montero and gentleman who became famous for his hunting experiences and who knew how to capture in several books that have come to our days for school and enjoyment of several generations of hunters who, like him, loved hunting and Nature. A little more than a quarter of a century later, we wanted to celebrate this anniversary with a double tribute: to the person of D. Antonio and to our knife, whose figures were left 30 years ago, somehow united. With hooks of stabilized poplar root wood and a sheath made in the artisan workshop "Quercur Leathercraft" we are sure that our humble tribute to the great gentleman and montero who was D. Antonio Covarsí, this limited edition of 250 units, will be to the liking and enjoyment of many fans of hunting and our knives. In gallery of images, D. Antonio Covarsí, in photography coming from the edition of 'Narrations of a Montero' published by Ediciones Velázquez in Madrid in 1978. An extraordinary piece by design, manufacture and strength, whose quality is even more evident from the exclusivity of its limited and numbered edition of 250 units and its luxury details, full of know-how and authentic craftsmanship.

Muela's philosophy about their luxury knives:

Without a doubt, among "Manufactures Muela's production, Luxury knives occupy a very special position. Knives for which exclusive designs combine precious metals and woods with exceptional craftmanship. Embossed silver, etchings and enamels, added to various luxury elements, make of this series a superb example of authentic tradition and artisanship of our knives, even including hand-forged Damascus steel blades meeting the undeniable quality standards of the "Knives as jewels" concept and manufactured for these Muela products for many years. Naturally, each individual knife comes in its own specific high quality sheath, in a special presentation box, and accompanied with a certificate accrediting its limited production. So, this super beautiful and strictly limited Muela hunting knife comes with nice storage box with Muela certification.

Steel quality informations about that superb luxury collectors knife:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Specifications:

Steel: 1.4116 = “MOVA”  (X50CrMoV15)
Blade length: 9.645” inch / 245 mm
Total length: 15.354” inch /  390 mm
Handle length: 5.708” inch / 145 mm
Handle scales: Stabilized Poplar Burl
Knife weight: 533 gr.

(We from Dream-Knives have no influence on which serial number we receive from Muela)

Muela LUPUS-25DAM.C Damascus Luxury Collectors Knife

- Handcrafted by Muela in Spain –

"Damascus steel” of 576 layers.

Introduction:

Here we offer you a real jewel from the knife manufacture Muela for sale.
This is the model "Lupus", which was manufactured exclusively from the finest materials. The breathtaking beauty of this collector's knife can hardly be surpassed, because the harmonious and double-edged blade shape speaks for itself. The handle is made of finest and specially selected staghorn in combination with finest rose wood. The guard element and the grip pommel (wild boar) are made of brass and complete the overall impression of this luxury knife.

Muela's philosophy about their luxury knives:

Without a doubt, among "Manufactures Muela's production, Luxury knives occupy a very special position. Knives for which exclusive designs combine precious metals and woods with exceptional craftmanship. Embossed silver, etchings and enamels, added to various luxury elements, make of this series a superb example of authentic tradition and artisanship of our knives, even including hand-forged Damascus steel blades meeting the undeniable quality standards of the "Knives as jewels" concept and manufactured for these Muela products for many years. Naturally, each individual knife comes in its own specific high quality sheath, in a special presentation box, and accompanied with a certificate accrediting its limited production.

So, this super beautiful Muela hunting knife comes with nice storage box with Muela certification.

Please note:

This Muela luxury collector's knife is made especially for you by Muela after your order. Therefore there is a short waiting time of 15 business days until we are able to ship your order.

Steel quality informations about that superb luxury collectors knife:

Carbon Damascus Steel Blade

“Damascus steel” of 576 layers forged by hand following ancient techniques.

Specifications:

Steel: Carbon Damascus Steel Blade
Blade length: 9.842” inch / 250 mm
Total length: 15.354” inch /  390 mm
Handle length: 5.511” inch / 140 mm
Handle scales: Stag & Rose Wood
Knife weight: 530 gr.

Muela Magnum-23DAM.C Damascus Collectors Knife

- Handcrafted by Muela in Spain –

"Damascus steel” of 576 layers.

Introduction:

Here we offer you a real jewel from the knife manufacture Muela for sale.
This is the model "Magnum", which was manufactured exclusively from the finest materials. The breathtaking beauty of this collector's knife can hardly be surpassed, because the harmonious and beautiful bowie blade speaks for itself. The handle is made of finest and specially selected staghorn in combination with finest rose wood. The guard element and the grip pommel (wild boar) are made of brass and complete the overall impression of this luxury knife.

Muela's philosophy about their luxury knives:

Without a doubt, among "Manufactures Muela's production, Luxury knives occupy a very special position. Knives for which exclusive designs combine precious metals and woods with exceptional craftmanship. Embossed silver, etchings and enamels, added to various luxury elements, make of this series a superb example of authentic tradition and artisanship of our knives, even including hand-forged Damascus steel blades meeting the undeniable quality standards of the "Knives as jewels" concept and manufactured for these Muela products for many years. Naturally, each individual knife comes in its own specific high quality sheath, in a special presentation box, and accompanied with a certificate accrediting its limited production.

So, this super beautiful Muela hunting knife comes with nice storage box with Muela certification.

Steel quality informations about that superb luxury collectors knife:

Carbon Damascus Steel Blade

“Damascus steel” of 576 layers forged by hand following ancient techniques.

Specifications:

Steel: Carbon Damascus Steel Blade
Blade length: 9.055” inch / 230 mm
Total length: 14.566” inch /  390 mm
Handle length: 5.511” inch / 140 mm
Handle scales: Stag & Rose Wood
Knife weight: 445 gr.

Muela MASTIN.E Luxury Hunting Dagger

- Handcrafted by Muela in Spain -

Introduction:

The Muela Mastin (Mastiff) dagger is a true work of art. This wonderful and handcrafted dagger from Muela in Spain impresses with its excellent workmanship and the best materials. This luxury dagger is finished off with a hand guard and a coin integrated into the genuine stag horn crown made of sterling silver. This very fine dagger comes with a high-quality, handcrafted leather sheath and a beautiful storage box.

Note: Please keep in mind that stag horn is a natural product and that is why it always looks different.

*The delivery time is approx. 20 business days after ordering, cause each dagger is manufactured individually*

Specifications:

Steel: 1.4116 Stainless Steel = “MOVA”  (X50CrMoV15) HRC 57-58
Blade length: 9.645” inch / 245 mm 
Total length: 16.141” inch /  410 mm
Handle length: 6.496” inch / 165 mm
Handle: Crown Stag Horn

Knife weight: 525 gr.

Steel quality informations 1.4116:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Muela PODENCO.E Luxury Hunting Dagger

- Handcrafted by Muela in Spain -

Introduction:

The Muela Podenco dagger is a true work of art. This wonderful and handcrafted dagger from Muela in Spain impresses with its excellent workmanship and the best materials. This luxury dagger is finished off with a hand guard and a coin integrated into the genuine stag horn crown made of sterling silver. This very fine dagger comes with a high-quality, handcrafted leather sheath and a beautiful storage box.

Note: Please keep in mind that stag horn is a natural product and that is why it always looks different.

*The delivery time is approx. 20 business days after ordering, cause each dagger is manufactured individually*

Specifications:

Steel: 1.4116 Stainless Steel = “MOVA”  (X50CrMoV15) HRC 57-58
Blade length: 9.645” inch / 245 mm 
Total length: 16.141” inch /  410 mm
Handle length: 6.496” inch / 165 mm
Handle: Crown Stag Horn

Knife weight: 525 gr.

Steel quality informations 1.4116:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

German PUMA Annual Collectors Knife Of The Year 2024

(Limited Edition of 25 pieces)

- Made in Solingen / Germany -

Introduction: