Pocket Knife

German Böker "Scout Thuja" Pocket Folding Knife

- Made in Solingen / Germany -

Introduction:

The Boker Scout has been firmly connected to our name since 1985. No one can say today if anyone would have expected that the pocket knife would be one of the most successful and popular knives from our range. But these many years in short-lived fads, that are also not unusual on the knife market, is definitely special. While no other model has had as many versions as the Scout over the years, the basic specifications never changed. The extremely stable body is from a single piece of nickel silver which is produced by sintering. The hollow ground blade made of stainless N690 contributes with its memorable shape to the incomparable appearance of the Scout. A classic Blacklock keeps the blade safely open. When the knife is opened, the spine locks into a notch on the back of the blade. To close the knife, push down the exposed part of the spine. The harmonic overall impression of this classic is completed by pleasantly shaped handle scales made of Thuja Wood, which elaborately hand-polished to a high gloss.

Specifications:

Steel: N690
Blade length: 3.149“ inch / 80 mm
Total length: 7.244” inch / 184 mm
Handle length: 4.094" inch / 104 mm
Handle scales: Thuja Wood / Nickel Silver

Blade Thickness: Not specified
Overall weight 160 gr.

Böker Solingen "1906" Ebony Pocket Folding Knife

- Made in Solingen / Germany -

Introduction:

Some things are very much en vogue for a while before falling back into obscurity - usually well deserved. Yet others are much too beautiful, too precious to remain lost forever. The classic Boker 1906 is such a case. The design is more than a hundred years old, but its clear lines are still much loved today. Therefore, we spared no effort to bring the 1906 back to life. Neither old tools nor prototypes or design drawings existed, so we had to redesign the knife from scratch, guided by traditional methods throughout the whole production process.
The result is a charismatic pocket knife with a new lease of life, exuding fin de siècle charm – a very special piece mainly because of its clean lines and characteristic grind. Following the classic style, the plates are brass while the bolsters are nickel silver. The 440C blade is secured with a back spring. Certified imported Ebony handle scales add an elegant accent.

Specifications:

Steel: 440C
Blade length: 3.503" inch / 89 mm
Total length: 7.677” inch / 195 mm
Handle length: 4,173” inch / 106 mm
Handle scales: Ebony Wood

Blade thickness: 2.5 mm
Overall weight 79 gr.

Additional Informations about "Nickel Silver":

Nickel silver is the name of an alloy containing copper, nickel and zinc that has a silver-like look. In the knife industry, it is mainly used for fittings, especially for the so-called bolsters.

Böker Solingen Pocket Multi-Tool Knife "Camp Classic Gold"

- Made in Solingen / Germany -

Introduction:

Even in the world of high-tech materials like powder metallurgical steel, composites like carbon or G10 and technical materials such as titanium or zirconium, classic pocket knives are still enjoying unabated popularity. Traditional designs like the Trapper, Scout, Barlow or our sporting knives have always been valued tools for everyday use and garner fans of all ages. With our Classic Gold series, we are offering a deliberate counterpoint to blades of a more modern make; with their laser engraved logo, these blades are certainly state-of-the-art but don't necessarily exude vintage charm. For the Classic Gold series, we came back to classic craftsmanship, finishing the blades with genuine classic gold etching that used to be common for high-quality knives. Highlighting their sophisticated appearance, the knives in this series have scales made from select pieces of certified imported desert ironwood, which is not just very sturdy but also offers a rather elegant look. The design is finished with a classic Boker logo in the handle scale. All in all, the Classic Gold series reaches into the past, bringing it back to life in a tangible way.

The six-piece Boker Camp Knife has been manufactured by hand since 1869 in our Solingen-based Manufactory. The concept, copied many times in the course of history, combines numerous useful tools in a high-quality Pocketknife. It is in production longer than any other multifunctional Knife. It offers two blades, a can opener, a cap lifter, a leather punch and reamer, a corkscrew, and a flathead screwdriver. Both blades are made of polished 4034 steel, the classic blade steel from Solingen, which combines corrosion resistance with the edge retention and is easy to sharpen. Thanks to the practical lanyard strap, the Knife can be easily attached to bags or other objects.

Specifications:

Steel: 4034
Blade length: 2.559“ inch / 65 mm
Total length: 6.102” inch / 155 mm
Handle length: 3.543” inch / 90 mm
Handle scales: Desert Ironwood & Nickel Silver

Blade thickness: 1.7 mm
Overall weight 111 gr.

German Böker "Scout Buffalo" Pocket Folding Knife

- Made in Solingen / Germany -

Introduction:

The Boker Scout has been firmly connected to our name since 1985. No one can say today if anyone would have expected that the pocket knife would be one of the most successful and popular Knifes from our range. But these many years in short-lived fads, that are also not unusual on the knife market, is definitely special. While no other model has had as many versions as the Scout over the years, the basic specifications never changed. The extremely stable body is from a single piece nickel silver which is produced by sintering. The hollow ground blade made of stainless N690 contributes with its memorable shape to the incomparable appearance of the Scout. A classic Backlock keeps the blade safely open. When the knife is opened, the spine locks into a notch on the back of the blade. To close the knife, push down the exposed part of the spine. The harmonic overall impression of this classic is completed by pleasantly shaped handle scales made of Buffalo Horn, which are elaborately hand polished to a high gloss.

Specifications:

Steel: N690
Blade length: 3.149“ inch / 80 mm
Total length: 7.244” inch / 184 mm
Handle length: 4.094" inch / 104 mm
Handle scales: Buffalo Horn / Nickel Silver

Blade Thickness: 3 mm
Overall weight 160 gr.

German Böker "Scout Stag" Pocket Folding Knife

- Made in Solingen / Germany -

Introduction:

The Boker Scout has been firmly connected to our name since 1985. No one can say today if anyone would have expected that the pocket knife would be one of the most successful and popular Knives from our range. But these many years in short-lived fads, that are also not unusual on the knife market, is definitely special. While no other model has had as many versions as the Scout over the years, the basic specifications never changed. The extremely stable body is from a single-piece nickel silverwhich is produced by sintering. The hollow ground blade made of stainless N690 is forged by Böhler and contributes with its memorable shape to the incomparable appearance of the Scout. A classic  Back-lock keeps the blade safely open. When the knife is opened, the spine locks into a notch on the back of the blade. To close the knife, push down the exposed part of the spine. The harmonic overall impression of this classic is completed by pleasantly shaped handle scales made of Stag.

Specifications:

Steel: N690
Blade length: 3.149“ inch / 80 mm
Total length: 7.244” inch / 184 mm
Handle length: 4.094" inch / 104 mm
Handle scales: Stag Horn

Blade Thickness: Not specified
Overall weight 160 gr.

FOX FX-525 OL or  FX-525 B or FX-525 BE Terzuola Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bob Terzuola".

Introduction:

Bob Terzuola:

"I always design my knives to be functional but graceful. Utility is always the main factor in my designs as a knife should be perfectly useful and comfortable in a variety of positions and cutting situations”.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.35" inch / 85 mm
Total length: 7.87” inch / 200 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Olive wood / Bocote wood  / Birch wood  

Blade thickness: 3 mm
Overall weight 100 gr.

Additional Information:

Blade Coating: satin

FOX The Dart FX-597 Tanto Folding Knife

- Made by Fox Knives in Italy -

Design by: "Doug Marcaida".

Introduction:

Doug Marcaida:

“My designs in general are based on my knowledge and use of blades related to my martial arts skills and experiences as a judge in History Channel’s Forged In Fire”.

 

Specifications:

Steel: N690Co stainless steel HRC 58-60
Blade length: 2.56" inch / 65 mm
Total length: 7.28” inch / 185 mm
Handle length: 4.72” inch / 120 mm
Handle scales: G10 black

Blade thickness: 3 mm
Overall weight 100 gr.

Additional Information:

Blade Coating: black Idroglider

Clip: stainless steel 420J2B - reversible

Back Ring: T6-6082 aircraft aluminum

 

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.

FOX Karambit 479 TK (Training) Folding Knife

- Made by Fox Knives in Italy -

Design by: "Fox Knives".

Introduction:

The Fox Karambit knife, is a super lightweight and an excellent training knife.

Specifications:

Steel: 420C stainless steel HRC 54-56
Blade length: 2.95" inch / 75 mm
Total length: 7.48” inch / 190 mm
Handle length: 4.53” inch / 115 mm
Handle scales: G10 red

Blade thickness: 3 mm
Overall weight 130 gr.

Additional Information:

Blade Coating: bead blasted

Clip: stainless steel 420J2B - reversible

Back Ring: T6-6082 aircraft aluminum

FOX Pheasant BR-011F Browning Feather Folding Knife

- Made by Fox Knives in Italy -

Design by: "Russ Kommer".

Introduction:

The Pheasant knife has a classic design with an elegant inlayed pheasant feather into the handle scales, meant to collectors or hunters! The classic blade is the result of many years of hunting in Alaska! As rugged as the men and women that carry it!

Russ Kommer:

“When I design any knife It has to have flow to the design! Once I have the right flow for the knife it will create its own beauty lines! My knives even in a tactical model have beauty lines! (Nice clean grinds, rounded to fit your hand this creates flow!) I use the three F process! Fit, Finish, Function”.

Steel: Stainless steel sandvik 12C27 HRC 56-58 
Blade length: 3.54" inch / 90 mm
Total length: 8.46” inch / 215 mm
Handle length: 4.92” inch / 125 mm
Handle scales: Resin + pheasant feather

Blade thickness: 3 mm
Overall weight 130 gr.

Additional Information:

Blade Coating: satin

Bolsters: 430 stainless steel

Sheath: Included