Pocket Knife

German Böker "Scout Thuja" Pocket Folding Knife

- Made in Solingen / Germany -

Introduction:

The Boker Scout has been firmly connected to our name since 1985. No one can say today if anyone would have expected that the pocket knife would be one of the most successful and popular knives from our range. But these many years in short-lived fads, that are also not unusual on the knife market, is definitely special. While no other model has had as many versions as the Scout over the years, the basic specifications never changed. The extremely stable body is from a single piece of nickel silver which is produced by sintering. The hollow ground blade made of stainless N690 contributes with its memorable shape to the incomparable appearance of the Scout. A classic Blacklock keeps the blade safely open. When the knife is opened, the spine locks into a notch on the back of the blade. To close the knife, push down the exposed part of the spine. The harmonic overall impression of this classic is completed by pleasantly shaped handle scales made of Thuja Wood, which elaborately hand-polished to a high gloss.

Specifications:

Steel: N690
Blade length: 3.149“ inch / 80 mm
Total length: 7.244” inch / 184 mm
Handle length: 4.094" inch / 104 mm
Handle scales: Thuja Wood / Nickel Silver

Blade Thickness: Not specified
Overall weight 160 gr.

Böker Solingen "1906" Ebony Pocket Folding Knife

- Made in Solingen / Germany -

Introduction:

Some things are very much en vogue for a while before falling back into obscurity - usually well deserved. Yet others are much too beautiful, too precious to remain lost forever. The classic Boker 1906 is such a case. The design is more than a hundred years old, but its clear lines are still much loved today. Therefore, we spared no effort to bring the 1906 back to life. Neither old tools nor prototypes or design drawings existed, so we had to redesign the knife from scratch, guided by traditional methods throughout the whole production process.
The result is a charismatic pocket knife with a new lease of life, exuding fin de siècle charm – a very special piece mainly because of its clean lines and characteristic grind. Following the classic style, the plates are brass while the bolsters are nickel silver. The 440C blade is secured with a back spring. Certified imported Ebony handle scales add an elegant accent.

Specifications:

Steel: 440C
Blade length: 3.503" inch / 89 mm
Total length: 7.677” inch / 195 mm
Handle length: 4,173” inch / 106 mm
Handle scales: Ebony Wood

Blade thickness: 2.5 mm
Overall weight 79 gr.

Additional Informations about "Nickel Silver":

Nickel silver is the name of an alloy containing copper, nickel and zinc that has a silver-like look. In the knife industry, it is mainly used for fittings, especially for the so-called bolsters.

German Böker "Scout Buffalo" Pocket Folding Knife

- Made in Solingen / Germany -

Introduction:

The Boker Scout has been firmly connected to our name since 1985. No one can say today if anyone would have expected that the pocket knife would be one of the most successful and popular Knifes from our range. But these many years in short-lived fads, that are also not unusual on the knife market, is definitely special. While no other model has had as many versions as the Scout over the years, the basic specifications never changed. The extremely stable body is from a single piece nickel silver which is produced by sintering. The hollow ground blade made of stainless N690 contributes with its memorable shape to the incomparable appearance of the Scout. A classic Backlock keeps the blade safely open. When the knife is opened, the spine locks into a notch on the back of the blade. To close the knife, push down the exposed part of the spine. The harmonic overall impression of this classic is completed by pleasantly shaped handle scales made of Buffalo Horn, which are elaborately hand polished to a high gloss.

Specifications:

Steel: N690
Blade length: 3.149“ inch / 80 mm
Total length: 7.244” inch / 184 mm
Handle length: 4.094" inch / 104 mm
Handle scales: Buffalo Horn / Nickel Silver

Blade Thickness: 3 mm
Overall weight 160 gr.

German Böker "Scout Stag" Pocket Folding Knife

- Made in Solingen / Germany -

Introduction:

The Boker Scout has been firmly connected to our name since 1985. No one can say today if anyone would have expected that the pocket knife would be one of the most successful and popular Knives from our range. But these many years in short-lived fads, that are also not unusual on the knife market, is definitely special. While no other model has had as many versions as the Scout over the years, the basic specifications never changed. The extremely stable body is from a single-piece nickel silverwhich is produced by sintering. The hollow ground blade made of stainless N690 is forged by Böhler and contributes with its memorable shape to the incomparable appearance of the Scout. A classic  Back-lock keeps the blade safely open. When the knife is opened, the spine locks into a notch on the back of the blade. To close the knife, push down the exposed part of the spine. The harmonic overall impression of this classic is completed by pleasantly shaped handle scales made of Stag.

Specifications:

Steel: N690
Blade length: 3.149“ inch / 80 mm
Total length: 7.244” inch / 184 mm
Handle length: 4.094" inch / 104 mm
Handle scales: Stag Horn

Blade Thickness: Not specified
Overall weight 160 gr.

FOX FX-F2017 40th Anniversary Collectors Folding Knife

- Made by Fox Knives in Italy -

Design by: "Fox Knives".

Introduction:

Specifications:

Steel: M390 stainless steel HRC 56-58
Blade length: 3.35" inch / 85 mm
Total length: 7.48” inch / 190 mm
Handle length: 4.13” inch / 105 mm
Handle scales: Marble carbon fiber

Blade thickness: 3.5 mm
Overall weight 120 gr.

Additional Information:

Blade Coating: Satin

Clip: titanium

Bag: Included

FOX FX-F2017 D Folding 40th Anniversary Damascus Knife

- Made by Fox Knives in Italy -

Design by: "Fox Knives".

Introduction:

Specifications:

Steel: Damasteel® DS93X™ Gysinge™ HRC 56-58
Blade length: 3.35" inch / 85 mm
Total length: 7.48” inch / 190 mm
Handle length: 4.13” inch / 105 mm
Handle scales: Marble carbon fiber

Blade thickness: 3.5 mm
Overall weight 123 gr.

Additional Information:

Blade Coating: Damascus

Clip: titanium

Gift Box: Included

FOX Radius FX-550 Ti Sandblasted Titanium Pocket Folding Knife

- Winner of 2019 BLADE Show: "Imported Knife of the Year and Overall Knife of the Year".

- Made by Fox Knives in Italy -

Design by: "Denis Simonutti".

Introduction:

The Fox Knife Radius FX-550 Ti is an impressive and remarkable pocket knife. At the 2019 Blade Show in Atlanta, Georgia USA this knife won awards for the best imported knife and Overall Knife of the Year. The Fox Knife Radius is a revolutionary pocket knife. The thumb stud is added to the handle and also functions as a lock. It’s really unique! By pushing the thumb stud you can unlock the knife to make sure you can close it. No one has ever done that.

The blade is made from high-tech Böhler M390 steel. One of the most popular types of steel on the market. It retains its sharpness for a really long time. As such you hardly have to sharpen the knife. So a really cool blade. But what about the handle? It is made from titanium. And the milling work was nicely carried out Subtle grip on specific parts, silver accents simply stunning.

Specifications:

Steel: stainless steel M390 HRC 59-61
Blade length: 2.95" inch / 75 mm
Total length: 7.28” inch / 185 mm
Handle length: 4,33” inch / 110 mm
Handle scales: Sandblasted Titanium

Blade thickness: 4 mm
Overall weight 140 gr.

Additional Information:

German Böker "Trapper" - TRPPR Pocket Folding Knife

- Made in Solingen / Germany -

Introduction:

Discreet in its name - sovereign in appearance. The Boker TRPPR (pronounced: trapper) is an extraordinary gentleman's knife that transfers the spirit of the successful Boker Trapper into a new era. Although reduced to the essentials, the pocket-knife leaves nothing to be desired. The ball-bearing blade made of powder metallurgy Magnacut (62-63 HRC) opens silky smooth via a flipper, while the elegant integral framelock with stainless steel inlay and overtravel stop reliably secures the knife. The blade steel used is characterised above all by high wear resistance, high toughness and high corrosion resistance and is rounded off by an attractive two-tone finish. The long bolster of the titanium handle body reinterprets the nostalgic "Spirit of the times" and shapes the TRPPR with its handle scales made of MICARTA and its unique grain into a new model of contemporary knife culture. Decorative accents are set by the front blade axle screw, which features the famous Boker tree emblem, and the titanium clip (tip-up/r) milled from the solid with a ball. To protect it from dirt and scratches, the Boker TRPPR is supplied with a high-quality felt case. Handmade in the Boker Manufactory in Solingen.

Specifications:

Steel: MagnaCut
Blade length: 3.188“ inch / 81 mm
Total length: 7.440” inch / 189 mm
Handle length: 4.251" inch / 108 mm
Handle scales: Micarta

Blade Thickness: 2,5 mm
Overall weight 70 gr.

FOX FX-515 W Terzuola Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bob Terzuola".

Introduction:

This knife is a “Every Day Carry” designed for daily utility and self defense. It is compact and strongly made with fine materials. Easy to carry with its convenient clip.

Bob Terzuola:

"I always design my knives to be functional but graceful. Utility is always the main factor in my designs as a knife should be perfectly useful and comfortable in a variety of positions and cutting situations”.

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.54" inch / 90 mm
Total length: 7.87” inch / 200 mm
Handle length: 4.33” inch / 110 mm
Handle scales: Ziricote wood

Blade thickness: 3 mm
Overall weight 110 gr.

Additional Information:

Blade Coating: satin

Sheath: Included

FOX "FX-525 Ti BL" Terzuola Titanium Frame Lock Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bob Terzuola".

Introduction:

This knife is a “Every Day Carry” designed for daily utility and self defense. It is compact and strongly made with fine materials. Easy to carry with its convenient clip.

Bob Terzuola:

"I always design my knives to be functional but graceful. Utility is always the main factor in my designs as a knife should be perfectly useful and comfortable in a variety of positions and cutting situations”.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 3.35" inch / 90 mm
Total length: 7.87” inch / 200 mm
Handle length: 4.53” inch / 110 mm
Handle scales: Bead blasted gray titanium  / Anodized blue titanium 

Blade thickness: 3 mm
Overall weight: 3.53 oz / 100 gr.

Additional Information:

Blade: Stone washed

Handle: Hole for Safety Cord

Clip: Anodized titanium

FOX Karambit FX-599 TK (Training) Folding Knife

Made by Fox Knives in Italy.

Design by: "Fox Knives"

Introduction:

The Fox "FX-599 TK" Trainer is ideal for learning how to handle the beautiful Karambit safely. The quick pulling of the knife as well as the handling and the various movements can be practiced safely. The signal-colored handles made of G10 lie securely in the hand, the blunt blade locks with a liner lock. An additional lock also increases work safety. With a glass breaker and a tip-up reversible clip.

Specifications:

Steel: 420C stainless steel HRC 54-56
Blade length: 2.55" inch / 65 mm
Total length: 6.69” inch / 175 mm
Handle length: 4.33” inch / 110 mm
Handle scales: G10 orange

Blade thickness: 3 mm
Overall weight 110 gr.

Additional Information:

Blade Coating: bead blasted

Clip: stainless steel 420J2B - reversible

Back Ring: T6-6082 aircraft aluminum

FOX Blackbird FX-591 TK Folding Knife

- Made by Fox Knives in Italy -

- Design by: "Bastinelli" -

Introduction:

Bastinelli:

“Generally, for all my design, I always try to associate a perfect ergonomics, and a real utility in accordance with the needs of customers, civilians or professionals”.

Specifications:

Steel: stainless steel N690Co HRC 58-60
Blade length: 2.55" inch / 65 mm
Total length: 6.69” inch / 170 mm
Handle length: 4.13” inch / 105 mm
Handle scales: G10 blue

Blade thickness: 3 mm
Overall weight 110 gr.

Additional Information:

Training Blade

Blade Coating: stone washed
Clip: stainless steel 420J2B - reversible
Back Ring: 6082 alluminum

FOX "Blackbird FX-591" ODSW Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bastinelli"

Introduction:

Bastinelli

“Generally, for all my design, I always try to associate a perfect ergonomics, and a real utility in accordance with the needs of customers, civilians or professionals”.

Specifications:

Steel: stainless steel N690Co HRC 58-60
Blade length: 2.55" inch / 65 mm
Total length: 6.69” inch / 170 mm
Handle length: 4.13” inch / 105 mm
Handle scales: G10 OD green

Blade thickness: 3 mm
Overall weight 110 gr.

Additional Information:

Blade Coating: stone washed
Clip: stainless steel 420J2B - reversible
Back Ring: 6082 alluminum

FOX Blackbird "FX-591 OD" Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bastinelli"

Introduction:

Bastinelli

“Generally, for all my design, I always try to associate a perfect ergonomics, and a real utility in accordance with the needs of customers, civilians or professionals”.

Specifications:

Steel: stainless steel N690Co HRC 58-60
Blade length: 2.55" inch / 65 mm
Total length: 6.69” inch / 170 mm
Handle length: 4.13” inch / 105 mm
Handle scales: G10 OD green

Blade thickness: 3 mm
Overall weight 110 gr.

Additional Information:

Blade Coating: black Idroglider 
Clip: stainless steel 420J2B - reversible
Back Ring: 6082 alluminum

FOX Radius FX-550 TiB Pocket Folding Knife

- Winner of 2019 BLADE Show: "Imported Knife of the Year and Overall Knife of the Year".

- Made by Fox Knives in Italy -

Design by: "Denis Simonutti".

Introduction:

The Fox Knives Radius FX-550 TiB is an impressive and remarkable pocket knife. At the 2019 Blade Show in Atlanta, Georgia USA this knife won awards for the best imported knife and Overall Knife of the Year. The Fox Knives Radius is a revolutionary pocket knife. The thumb stud is added to the handle and also functions as a lock. It’s really unique! By pushing the thumb stud you can unlock the knife to make sure you can close it. No one has ever done that.

The blade is made from high-tech Böhler M390 steel. One of the most popular types of steel on the market. It retains its sharpness for a really long time. As such you hardly have to sharpen the knife. So a really cool blade. But what about the handle? It is made from titanium. And the milling work was nicely carried out Subtle grip on specific parts, silver accents simply stunning.

Specifications:

Steel: stainless steel M390 HRC 59-61
Blade length: 2.95" inch / 75 mm
Total length: 7.28” inch / 185 mm
Handle length: 4,33” inch / 110 mm
Handle scales: Titanium Black PVD

Blade thickness: 4 mm
Overall weight 140 gr.

Additional Information: