Sheath Included

Böker Solingen Classic Western Bowie N690 Knife

- Made in Solingen / Germany -

Introduction:

The design of the traditional Boker Bowie was based on original drafts from the early 19th century and equipped with an extremely stable, 6.4 mm thick blade made from N690. The name of the knife goes back to James "Jim" Bowie, the famous pioneer and soldier who is revered as a hero of the Wild West. Contrary to the widely copied Sheffield Bowie, the variations of this outdoor knife resemble the early American Bowie with its s-shaped stainless steel crossguard sporting a finely satinized surface. The exquisite scales of domestic oak lend the Boker Bowie even more authenticity. Comes with a high-quality Western leather sheath in black, design based on the original.

Specifications:

Steel: N690
Blade length: 7.795“ inch / 198 mm
Total length: 12.795” inch / 325 mm
Handle length: 5" inch / 127 mm
Handle scales: Oak Wood

Blade Thickness: 6.4 mm
Overall weight 495 gr.

N690:

The cobalt-alloyed N690 by Böhler (not to be confused with the lower-grade N695!) is a very reliable upper middle-grade steel we use at our Solingen manufacture for a wide variety of projects.

Böker Solingen Classic Western Stag Bowie N690 Knife

- Made in Solingen / Germany -

Introduction:

The design of the traditional Boker Bowie was based on original drafts from the early 19th century and equipped with an extremely sturdy blade made from N690 and exclusive handle scales made from carefully selected stag. Due to the considerable size and thickness of the handle scales, it was difficult and expensive to find the right supplier for premium-grade stag. At last, the search was successful, and we are happy to offer our many Bowie knife fans a high-end classic version. Handcrafted by Boker Manufactory Solingen. Comes with a high-quality western leather sheath and a new version of the historic Boker tree symbol.

Specifications:

Steel: N690
Blade length: 7.795“ inch / 198 mm
Total length: 12.795” inch / 325 mm
Handle length: 5" inch / 127 mm
Handle scales: Stag

Blade Thickness: 6.4 mm
Overall weight 537 gr.

N690:

The cobalt-alloyed N690 by Böhler (not to be confused with the lower-grade N695!) is a very reliable upper middle-grade steel we use at our Solingen manufacture for a wide variety of projects.

German Böker "Försternicker" Hunting Stag Knife

- Made in Solingen / Germany -

* Again available at June 30th 2024 *

Introduction:

With the Boker Försternicker, we are calling on traditional values, since this vintage version of the Nicker used to be a popular part of our program several decades ago. The slightly wider, curved blade is typical for this design, offering a somewhat larger task profile than the classic pointed hunting knife. The curved spine with subtle thumb grooves add to the comfortable grip and highlight the exclusive design.
The Försternicker is ideal for all outdoor tasks on the hunt, since the sturdy blade with its high flat grind combines stability with excellent cutting properties. The use of modern Böhler N690 for the blade highlights the exceptional practical value thanks to the superior edge retention compared to classic nicker steel. It is also easy to sharpen.
The nickel silver bolster and butt give the Försternicker an excellent grip. The knife is easy to carry in the classic nicker sheath. With scales made from carefully selected stag.

Specifications:

Steel: N690
Blade length: 4.330“ inch / 110 mm
Total length: 8.858” inch / 225 mm
Handle length: 4.527" inch / 115 mm
Handle scales: Stag Horn

Blade Thickness: 4.3 mm
Weight 205 gr.

Additional information about what "Flat Grind" means:

German Böker G.E.K. German Expedition Knife

- Made in Solingen / Germany -

Introduction:

This modern classic is a full-size survival knife whose versatility helps it to tackle any situation one might come across in the wild. From building a shelter to hunting uses and intercepting or skinning game, or even preparing meals, the Boker German Expedition Knife leaves nothing to be desired. The versatile blade shape is based on the experience of Tony Lennartz, while the G.E.K. has also gained wide appeal by practitioners as a highly versatile tool. This exceedingly rugged design uses N690 as the blade steel, which provides an excellent foundation with its grain structure and good corrosion resistance The rugged stonewash finish combines an easy to care for finish with an attractive visual appeal.

The handle design of the G.E.K. was enhanced in an effort to perfect the ergonomics for the various grip positions. The perforated design of the handle ensures moderate weight, while the exchangeable G10 handle scales provide optimum grip and extremely secure handling. The impact element on the pommel increases the range of uses. The left-handed or right-handed carry premium black leather sheath is designed for Lennartz' favorite carrying option - the cross draw. The knife is positioned diagonally on the belt and can be deployed or stowed away with ease. The knife is secured with a two-sided push-button closure.

Specifications:

Steel: N690 stainless steel
Blade length: 6.496“ inch / 165 mm 
Total length: 11.338” inch / 288 mm
Handle length: 4.842” inch / 123 mm
Handle scales: G10

Blade Thickness: 5 mm
Overall weight 258 gr.

Sheath: Leather

German Böker G.E.K. German Expedition Knife EDC

- Made in Solingen / Germany -

Introduction:

The compact version of the Boker German Expedition Knife by Tony Lennartz has the same strong characteristics of its big brother, but in a more practical and easy to handle size due to its reduced blade length. As a result, the G.E.K. EDC is an excellent and versatile tool not only in the wild, but is also a competent companion for professional public safety or everyday use. Here as well, the N690 blade steel with its stonewash finish is an outstanding raw material, while the exchangeable G10 handle scales provide solid and secure handling in any weather condition.

The premium black leather sheath is also ambidextrous, and can be carried diagonally in the typical Lennartz manner. Here as well, the push-button closure can be operated from the left or right, giving the knife secure and intuitive handling for any carrying option. As a true allrounder, it is equally versatile and rugged, but can be comfortably carried due to its moderate weight and the clever blade design.

Specifications:

Steel: N690 stainless steel
Blade length: 4.527“ inch / 115 mm 
Total length: 9.133” inch / 232 mm
Handle length: 4.606” inch / 117 mm
Handle scales: G10

Blade Thickness: 5 mm
Overall weight 180 gr.

Sheath: Leather

German Böker "Gobec" Nicker Knife

- Made in Solingen / Germany -

Introduction:

The new edition of the popular Jagdnicker, a fixed-blade hunting knife by Stefan Gobec, is drop forged and fully integral. You can wear the leather sheath either on the belt or more traditionally without the removable belt loop in the knife pocket of your leather or hunting pants. The finely polished blade is small, as is typical for this kind of knife, but is very sturdy at 4 mm thickness. A classic which impressively combines hunting tradition and meticulous craftsmanship. The blade uses the classic Solingen blade steel 4034. The scales are made of genuine stag.

Specifications:

Steel: 4034
Blade length: 4.055“ inch / 103 mm
Total length: 8.053” inch / 216 mm
Handle length: 4.448" inch / 113 mm
Handle scales: Stag Horn

Blade Thickness: 4.1 mm
Weight 156 gr.

Additional informations about 4034 steel:

4034 is a classic Solingen steel combining edge retention and corrosion resistance. It is also easy to sharpen. The German steel has a hardness of 54-55 HRC.

German Böker Hunting Knife "Integral II."

- Made in Solingen / Germany -

Introduction:

The Boker Integral II. is the compact version of the Vollintegral, just as sturdy and die-forged from a single piece of steel. The rugged blade and excellent ergonomics of the handle scales make the knife perfect for hunting tasks and more. The conical tang and hand-ground finger choils highlight the sophisticated craftsmanship and offer a much more comfortable grip. The scales consist of certified imported rosewood, precision-milled to minimize production tolerances. The blade is made from the reliable outdoor material 440C and equipped with a flat grind that offers great stability even for heavy-duty tasks. Comes with a high-quality leather sheath.

Specifications:

Steel: 440C stainless steel
Blade length: 3.937“ inch / 100 mm
Total length: 8.661” inch / 220 mm
Handle length: 4.724” inch / 120 mm
Handle scales: Walnut Wood

Blade Thickness: 4,2 mm
Overall weight 176 gr.

Sheath: Leather

German Böker Hunting Stag Knife "Integral II."

- Made in Solingen / Germany -

Introduction:

The Boker Integral II. is the compact version of the Vollintegral, just as sturdy and die-forged from a single piece of steel. The rugged blade and excellent ergonomics of the handle scales make the knife perfect for hunting tasks and more. The conical tang and hand-ground finger choils highlight the sophisticated craftsmanship and offer a much more comfortable grip. The scales consist of certified imported rosewood, precision-milled to minimize production tolerances. The blade is made from the reliable outdoor material 440C and equipped with a flat grind that offers great stability even for heavy-duty tasks. Comes with a high-quality leather sheath.

Specifications:

Steel: 440C stainless steel
Blade length: 3.937“ inch / 100 mm
Total length: 8.661” inch / 220 mm
Handle length: 4.724” inch / 120 mm
Handle scales: Stag Horn

Blade Thickness: 3,96 mm
Overall weight 208 gr.

Sheath: Leather

German Böker Full Tang Knife "Savannah-Micarta"

- Made in Solingen / Germany -

Introduction:

The Boker Savannah is a professional hunting and outdoor knife with a massive blade and elegant lines. The design by Armin Stütz, from the Austrian knife forge "Steirer Eisen", was developed in collaboration with professional rangers based on intensive experience in big game hunting in South Africa. The solid blade has an exceptional two-tone finish and is made of the cobalt-alloyed N690. This high performance steel can handle any cutting task, and the full tangdesign of this piece provides extraordinary strength and stability. The elaborately grooved canvas Micarta scales provide not only a characteristic look but also an extremely secure grip, even when wearing gloves or in wet conditions. A red fiber underlay enhances its unique design. Stainless steel bolsters and a lanyard hole complete this high class knife. A reliable and powerful companion for all outdoor activities. With high quality leather sheath.

Specifications:

Steel: N690
Blade length: 4.566“ inch / 116 mm
Total length: 8.976” inch / 228 mm
Handle length: 4.409" inch / 112 mm
Handle scales: Micarta

Blade Thickness: 3.4 mm
Overall weight 220 gr.

Additional informations about "Steirer Eisen and "Armin Stütz":

The Austrian Armin Stütz began manufacturing knives in 1984 and founded the blacksmith Steirer Eisen in 1996. Since this time, knives and swords have been produced in pure manual work, initially, in particular, fixed knives, but for a number of years also increasingly folding knives for a wide range of applications. In the meantime, Steirer Eisen is Austria\'s largest blacksmith.

German Böker "Siwss Army Dagger"

- Made in Solingen / Germany -

Introduction:

The Swiss Dagger was a common weapon of the Swiss pikemen in the 15th and 16th century, which often had a middle position between dagger and sword due to its blade length. The dagger, also known as Baselard, was usually not issued as ordinance weapons, but had to be purchased privately by the soldiers and then served as a secondary weapon. Characteristic of the Swiss Dagger is the design of the pommel and the crossguard. The unusual, curved design can be traced back to the early 13th century and can also be found in the authentic design of our hand-made edition. Handpicked local cherry wood is used for the handles of the dagger, which has enjoyed great popularity since ancient times, especially because of its reddish color. The dagger blade, sharpened and pointed on both sides, already had a diamond-shaped cross-section in historical models, because this construction proved to be extremely stable and effective. It is made of the classic Carbon Steel C75 and impresses simply because of its length. The satin-finished blade is marked with the original Boker blade logo from the 1930s. The logo and the individual serial number guarantee the authenticity of the knife and stand for consistently high production quality. With elaborate metal sheath according to the historical models.

Specifications:

Steel: C75
Blade length: 8.622“ inch / 219 mm
Total length: 14.173” inch / 360 mm
Handle length: 5.551" inch / 141 mm
Handle scales: Cherry Wood

Blade Thickness: 4.5 mm
Overall weight 256 gr.

German Böker XL 2.0 Maple Wood Full Tang Knife

- Made in Solingen / Germany -

Introduction:

The Boker Vollintegral XL is the big brother of the Boker Vollintegral, which has been tried and tested for many years, and meets the wish often expressed to us for a larger version. The impressive blade of satin- finnished 440C with a flat grind further maximises the stability of the blade. The steel is ice hardened to 58 to 59 HRC, making it suitable for stronger game, whether in northern Europe or overseas. The knife, drop-forged from one piece of steel, with intricately contoured handle scales is made of certified imported rosewood that always lies securely in the hand. The hand guard and knob are rounded to optimise the look and feel in the hand. Supplied with a high-quality brown leather sheath. Handmade in the Boker Knife Manufactory in Solingen.

Specifications:

Steel: 440C stainless steel
Blade length: 5.787“ inch / 147 mm
Total length: 11.259” inch / 286 mm
Handle length: 5.472” inch / 139 mm
Handle scales: Rose Wood

Blade Thickness: 5 mm
Overall weight: 300 gr.

Fallkniven A1bL Survival Knife

- Made by Fällkniven -

Introduction:

A new world standard was set with the Fallkniven A1 through attention to important details including technical design, ergonomics and economy. The Fallkniven A1 surpasses international standards for strength, personal security capabilities, and value for money. The Fallkniven A1 is an all-purpose knife on the larger side designed for heavy duty use. The powerful blade is made of extremely hard and tough laminated VG10 steel, and will withstand the stress of hard use. The knife is superb at chopping as well finer daily cutting tasks thanks to the ergonomic grip. The full tang goes entirely through the handle so you can strike with the end of it without breaking the grip. The sturdy black leather sheath allows you to fasten the knife on your belt or your pack, and even upside down. The Fallkniven A1 is unaffected by water and works equally well in extreme cold and stifling heat. If your needs require that no reflections come from your knife blade, we offer a black CeraKote option. The CeraKote is an extremely tough surface coating that will also protect the blade from corrosion. CeraKote is a hard coating made of Teflon and ceramics that we apply for military users and others who want to avoid shiny blades. Be aware, however, that although CeraKote is an industry standard, it is also just a finish applied to the metal blade similar to painting a car. Please note that physical abrasions could scratch through the CeraKote coating. Over time, the black CeraKote may separate from the blade, but more durable coatings make the knife difficult to sharpen and cost up to 100 times more than CeraKote.

Attaching a black surface on a rust resistant, perfectly smooth blade so that it sticks for time and eternity is all impossible. We have tested some extremely hard coatings, but they proved to be many times more expensive and make it harder to sharpen the knife.

Specifications:

Steel: Laminated VG10 HRC 59

Blade length: 6.30" inch / 160 mm
Total length: 11.02” inch / 280 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Kraton

Blade thickness: 6 mm
Knife weight 319 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade: Black Coated

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven A1bz Survival Knife

- Made by Fällkniven -

Introduction:

A new world standard was set with the Fallkniven A1 through attention to important details including technical design, ergonomics and economy. The Fallkniven A1 surpasses international standards for strength, personal security capabilities, and value for money. The Fallkniven A1 is an all-purpose knife on the larger side designed for heavy duty use. The powerful blade is made of extremely hard and tough laminated VG10 steel, and will withstand the stress of hard use. The knife is superb at chopping as well finer daily cutting tasks thanks to the ergonomic grip. The full tang goes entirely through the handle so you can strike with the end of it without breaking the grip. The sturdy black leather sheath allows you to fasten the knife on your belt or your pack, and even upside down. The Fallkniven A1 is unaffected by water and works equally well in extreme cold and stifling heat. If your needs require that no reflections come from your knife blade, we offer a black CeraKote option. The CeraKote is an extremely tough surface coating that will also protect the blade from corrosion. CeraKote is a hard coating made of Teflon and ceramics that we apply for military users and others who want to avoid shiny blades. Be aware, however, that although CeraKote is an industry standard, it is also just a finish applied to the metal blade similar to painting a car. Please note that physical abrasions could scratch through the CeraKote coating. Over time, the black CeraKote may separate from the blade, but more durable coatings make the knife difficult to sharpen and cost up to 100 times more than CeraKote.

Attaching a black surface on a rust resistant, perfectly smooth blade so that it sticks for time and eternity is all impossible. We have tested some extremely hard coatings, but they proved to be many times more expensive and make it harder to sharpen the knife.

Specifications:

Steel: Laminated VG10 HRC 59

Blade length: 6.30" inch / 160 mm
Total length: 11.02” inch / 280 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Kraton

Blade thickness: 6 mm
Knife weight 319 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade: Black Coated

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven A1L Survival Knife

- Made by Fällkniven -

Introduction:

A new world standard was set with the Fallkniven A1 through attention to important details including technical design, ergonomics and economy. The Fallkniven A1 surpasses international standards for strength, personal security capabilities, and value for money. The Fallkniven A1 is an all-purpose knife on the larger side designed for heavy duty use. The powerful blade is made of extremely hard and tough laminated VG10 steel, and will withstand the stress of hard use. The knife is superb at chopping as well finer daily cutting tasks thanks to the ergonomic grip. The full tang goes entirely through the handle so you can strike with the end of it without breaking the grip. The sturdy black leather sheath allows you to fasten the knife on your belt or your pack, and even upside down. The Fallkniven A1 is unaffected by water and works equally well in extreme cold and stifling heat.

Specifications:

Steel: Laminated VG10 HRC 59
Blade length: 6.30" inch / 160 mm
Total length: 11.02” inch / 280 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Kraton

Blade thickness: 6 mm
Knife weight 319 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade: Satin Finish

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven A1pro Pilot Survival Knife

- Made by Fällkniven -

Introduction:

There are basic survival knives, and there are survival knives for the professional. Our original models of the F1, S1 and A1 have provided exceptional service for more than 20 years. And due to their outstanding quality and durability they will continue to perform for many more years. Nevertheless our drive to continually improve our knives has led us to develop the new Pro Series. The Pro Series are survival knives of near-unimaginable quality, durability and performance. Compared to their predecessors, the Pro series of F1, S1 and A1 differs in the following important areas:

1. The original laminated VG10 steel is upgraded to a laminate cobalt steel (lam. CoS) blade that ensures a durable edge and improved edge retention.
2. The blades are thicker increasing the torsional rigidity so the knives will withstand even greater external forces.
3. The full-length tapered tang is wider and thicker and therefore significantly stronger.
4. The crossguard is now made of stainless steel and permanently welded to the tang.
5. The convex blade edge has been refined to improve its cutting properties.
6. The zytel sheaths are redesigned, more durable, and better suited for the Molle attachment system.

Understandably these knives fall into a higher price category. However, considering the unparalleled quality they are by no means over priced. A professional survival knife must perform in all weather with no exceptions. The professional survival knife must be comfortable and safe to handle for both fine and rough work in summer heat and winter cold. We at Fallkniven have considered every design aspect of these superb professional survival knives and we stand behind them with a lifetime warranty on materials and workmanship.

Steel: Laminated CoS HRC 60
Blade length: 6.30" inch / 160 mm
Total length: 11.14” inch / 283 mm
Handle length: 4.84” inch / 123 mm
Handle scales: Thermorun

Blade thickness: 7 mm
Knife weight 363 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Finger Guard: Stainless Steel

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven A1x Military Survival Knife

- Made by Fällkniven -

Introduction:

Your X-knife is the strongest, sharpest and safest stainless steel knife in production. If your life is in danger, you can always rely on your X-knife. It is designed to withstand all the stresses applied by the human hand, which means that it is virtually indestructible. It assumes, however, that you are careful with the knife and that it is used  as intended, namely as a sharp precision tool.

The basis of the X-knife’s strength lies in the laminated cobalt steel, and also in the well-thought-out construction in which break zones have been eliminated. Together with the hand-shaped convex edge, the X-knife is a concept that beats everything else in the world in terms of safety and comfort.

In their usual way, they have put a lot of energy into designing a safe knife sheath, which is actually where the knife will spend most of its time. The design of the sheath determines the access to the knife, and here they have really put all their efforts in order to get a safe sheath that allows easy access to the knife. The sheath has both a transport lock (the folding bracket with a strap) and a working safety detail that allows the knife to be in place until you decide to use it. It is a bit a belt-and-braces approach, but we like putting safety first – a lost knife is of no use. The transport lock will therefore allow the knife to be fastened tip-up or tip-down on the body or on your equipment without any risk.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 6.34" inch / 161 mm
Total length: 11.18” inch / 284 mm
Handle length: 4.84” inch / 123 mm
Handle scales: Thermorun

Blade thickness: 7 mm
Knife weight 401 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Full Tang

Blade: Satin Finish

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven A1xb Tungsten Carbide Knife

- Made by Fällkniven -

Introduction:

Your X-knife is the strongest, sharpest and safest stainless steel knife in production. If your life is in danger, you can always rely on your X-knife. It is designed to withstand all the stresses applied by the human hand, which means that it is virtually indestructible. It assumes, however, that you are careful with the knife and that it is used  as intended, namely as a sharp precision tool. The basis of the X-knife’s strength lies in the laminated cobalt steel, and also in the well-thought-out construction in which break zones have been eliminated. Together with the hand-shaped convex edge, the X-knife is a concept that beats everything else in the world in terms of safety and comfort. About the all-black version: This surface is the hardest we have ever encountered. Although we really tried to wear down the black coating with the toughest, driest curly birch we could find, we never succeeded in getting holes in this extremely hard, durable surface. Still, we cannot guarantee that it will stay for time and eternity, after all, the blade can be ground and certainly a diamond or ceramic stone will bite on the surface. Also for example a grain of sand can scratch or leave a mark in the coating. The hardness is at 2400 HV (Vickers) or around HRC 83.

In their usual way, they have put a lot of energy into designing a safe knife sheath, which is actually where the knife will spend most of its time. The design of the sheath determines the access to the knife, and here they have really put all their efforts in order to get a safe sheath that allows easy access to the knife. The sheath has both a transport lock (the folding bracket with a strap) and a working safety detail that allows the knife to be in place until you decide to use it. It is a bit a belt-and-braces approach, but we like putting safety first – a lost knife is of no use. The transport lock will therefore allow the knife to be fastened tip-up or tip-down on the body or on your equipment without any risk.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 6.34" inch / 161 mm
Total length: 11.18” inch / 284 mm
Handle length: 4.84” inch / 123 mm
Handle scales: Thermorun

Blade thickness: 7 mm
Knife weight 401 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Full Tang

Blade: Tungsten Carbide

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven A1xbclip Survival Knife

- Made by Fällkniven -

Introduction:

Your X-knife is the strongest, sharpest and safest stainless steel knife in production. If your life is in danger, you can always rely on your X-knife. It is designed to withstand all the stresses applied by the human hand, which means that it is virtually indestructible. It assumes, however, that you are careful with the knife and that it is used  as intended, namely as a sharp precision tool.

The basis of the X-knife’s strength lies in the laminated cobalt steel, and also in the well-thought-out construction in which break zones have been eliminated. Together with the hand-shaped convex edge, the X-knife is a concept that beats everything else in the world in terms of safety and comfort.

In their usual way, they have put a lot of energy into designing a safe knife sheath, which is actually where the knife will spend most of its time. The design of the sheath determines the access to the knife, and here they have really put all their efforts in order to get a safe sheath that allows easy access to the knife. The sheath has both a transport lock (the folding bracket with a strap) and a working safety detail that allows the knife to be in place until you decide to use it. It is a bit a belt-and-braces approach, but we like putting safety first – a lost knife is of no use. The transport lock will therefore allow the knife to be fastened tip-up or tip-down on the body or on your equipment without any risk.

This knife sheath has a stainless clip that allows you to easily carry the knife on your waist belt. The advantages are several – including that you can easily remove and stow your knife. When belt-mounted, the knife will hang vertically, a few centimeters lower than the belt, allowing it to be accessed even if wearing a backpack or long jacket. The articulation in this sheath system allows the wearer to move the knife and sheath to one side when seated or driving a vehicle.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 6.34" inch / 161 mm
Total length: 11.18” inch / 284 mm
Handle length: 4.84” inch / 123 mm
Handle scales: Thermorun

Blade thickness: 7 mm
Knife weight 401 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Full Tang

Blade: Satin Finish

Laminated CoS: A newly developed high alloy cobalt-special steel