Special Offers

German Böker 1969 Mach-1 Damascus knife

- Made in Solingen / Germany -

Introduction:

Unrestrained, with inherent power. Spirited, with a gentle disposition. The vastness in view, everyday life out of sight. The highway seemingly endless, with rough asphalt, crumbling yellow markings, and blowing desert dust. Before long, the endlessness gives way to a feeling of freedom, the sunset bathing the landscape and your spirit in a warming blanket of bliss and gentle wind. The deep sound of the powerful Windsor V8 Small Block engine with 186 kW (253 hp) has a calming effect, making the road trip in the Ford Mustang a very special moment. 

Inspired by the World War II fighter plane, the P-51 Mustang, Ford developed the Mustang in the early 1960s, which was launched in 1964. As a compact sports coupé, the affordable pony car, whose name derives from the galloping horse in the Ford Mustang's radiator grille logo, appealed primarily to a younger clientele. To counter the high-powered competition from Dodge, Pontiac, and Chevrolet, Ford made a statement in the league of powerful muscle cars with the Mustang Mach-1. The first-generation Mach-1 from 1969 was available exclusively as a fastback variant and differed from the production model in both appearance and performance: A sports suspension, matte black sports stripes, and a hood with cooling air intake, chrome exhaust tips and fuel cap, hood pins, front and rear spoilers, and a luxurious interior gave more than 72,000 units of this model a real boost in sales.

Over the years, the Mustang has become the epitome of the muscle car and is now continuing its legacy in its 7th generation. Boker references the vehicle's unmistakable design and makes the legend even more tangible in the 1969 Mach-1 Damascus knife of the same name. Parts from the wheel hub, wishbone, and suspension were used for the elegant 84-layer Damascus blade, which was hand-forged by Chad Nichols in a wave pool pattern inspired by the tire marks burned into the asphalt after a circular donut drift. The ball-bearing blade with its distinctive false edge opens smoothly via the removable thumb pin and cuts with rich torque. To prevent the passionate knife from getting out of hand, the liner lock locks the blade with the familiar coolness of a Ford Mustang. Finger recesses in the handle made of lightweight, high-strength aluminum are reminiscent of the fenders of the muscle car, while the gold-colored inlay of the front handle shell ties in with the side trim of the door and body. 

The expressive Silver Jade color scheme of the handle emphasizes the sporty look of the pocket knife and creates a noticeable V8 vibration in the hand. The sloping back of the handle is nostalgically inspired by the fastback contour of the car body, while the detailed blade screw makes the forward thrust of the wheels palpable. Straight and angular, the stainless steel clip, milled from solid metal, is reminiscent of the door handles on the Ford Mustang. Delivery includes a high-quality floating display, impatient hoof scraping, and the necessary dose of nonchalance. Handcrafted at the Boker factory in Solingen.

Specifications:

Steel: Damascus
Blade length: 3.228“ inch / 82 mm 
Total length: 7.795” inch / 198 mm
Handle length: 4.566” inch / 116 mm
Handle scales: Aluminum

Designer: Tommaso Rumici

Blade thickness: 3.63 mm
Overall weight 116 gr.

German Böker "Försternicker" Hunting Stag Knife

- Made in Solingen / Germany

Introduction:

With the Boker Försternicker, we are calling on traditional values, since this vintage version of the Nicker used to be a popular part of our program several decades ago. The slightly wider, curved blade is typical for this design, offering a somewhat larger task profile than the classic pointed hunting knife. The curved spine with subtle thumb grooves add to the comfortable grip and highlight the exclusive design.
The Försternicker is ideal for all outdoor tasks on the hunt, since the sturdy blade with its high flat grind combines stability with excellent cutting properties. The use of modern Böhler N690 for the blade highlights the exceptional practical value thanks to the superior edge retention compared to classic nicker steel. It is also easy to sharpen.
The nickel silver bolster and butt give the Försternicker an excellent grip. The knife is easy to carry in the classic nicker sheath. With scales made from carefully selected stag.

Specifications:

Steel: N690
Blade length: 4.330“ inch / 110 mm
Total length: 8.858” inch / 225 mm
Handle length: 4.527" inch / 115 mm
Handle scales: Stag Horn

Blade Thickness: 4.3 mm
Weight 205 gr.

Additional information about what "Flat Grind" means:

Böker Leopard I. Damascus Folding Knife (Limited Edition)

- Made in Solingen / Germany -

Introduction:

The impressive Boker Leopard-Damascus I. is a real piece of living history. The blade is made of high-performance Damascus, forged exclusively for Boker from the gun barrel steel of the German Leopard I battle tank. It has a hardness of 61 to 63 HRC and a high degree of toughness at the same time. The 300-layer Damascus in the Small Pyramids pattern is ideally suited to the hardcoat-anodised handle made of CNC-milled AlMgSi1, which is considerably higher quality than the usual AlMg3 due to the higher silicon proportion. The decorative inlays are made of certified imported Ziricote Wood. With convertible clip (tip-up/tip-down). Delivery with gift box, certificate of authenticity and individual serial number.

Specifications:

Steel: Damascus
Blade length: 3.543“ inch / 90 mm
Total length: 8.267” inch / 210 mm
Handle length: 4.724” inch / 120 mm
Handle scales: Aluminum / Ziricote Wood
Overall weight 120 gr.

Note: We from Dream-Knives have no influence on which serial number we receive from Böker.

German Böker MG-42 Damascus Collector's Dagger

- Made in Solingen / Germany -

Introduction:

With the classically elegant Boker MG-42 Damascus Dagger, the crown of historical Boker Damascus steel projects is provided with yet another jewel. The MG-42 is one of the internationally renowned milestones in weapons technology, thanks above all to its revolutionary production technology at the time with the consistent use of stamped sheet metal parts, exceptional reliability and ease of use, and a cadence that was previously unknown.

Raw materials and production time had increasingly become critical and decisive factors in the course of the war. Therefore, the Army Ordnance Office was looking for a successor to the MG-34, which was already convincing in its function, but took up too much time and material due to its complex production. The new MG was also to serve as a standardised weapon for light, anti-aircraft, airborne and aperture purposes. Since the central task was not to improve the product but to optimise the manufacturing process, a proven specialist in mass production rather than a weapons expert was commissioned with the new design. The choice fell on Werner Gruner, a mechanical engineer at the Johannes Großfuß metal and lacquerware factory. Gruner was presumably assisted in the development by experienced gun designers. The consistent use of sheet metal stampings instead of milled parts and the omission of accurateness in non-functional details made it possible to build a weapon that was even more reliable than its predecessor, while significantly reducing production time and costs. Almost trouble-free function and firing accuracy in all weather conditions, the change of hot-shot barrels within seconds and a cadence of 1,500 rounds per minute (25 rounds/second) established the MG-42's reputation. A brake in the form of additional mass in the breech cavity made it possible to reduce the immense cadence to 700 rounds/minute and thus the ammunition consumption. A roller shutter controlled by a cam made these impressive technical characteristics possible. In a slightly modified form, the MG-42 is still the standard MG of the German armed forces today as MG 3. Rare originals from the Second World War fetch between USD 40,000 and USD 60,000 at Rock Island Auctions.

The steel of the MG-42 is forged by our long-time and experienced partner Chad Nicols into the heart of the dagger, the double-edged blade with a discreet hollow groove on both sides. The chosen Damascus pattern, Low Layer Raindrop (40 layers) is excellently accentuated by the symmetrical profile of the blade.

The dagger's toggle and pommel are made of solid stainless steel. In the pommel, the cooling fins and gas outlets of the recoil amplifier (actually a combined component with the functions of a recoil amplifier, a flash hider and a barrel guide sleeve) were incorporated as a design element. Nevertheless, form followed function here as well, for the grooves increase the grip of the dagger in the reverse grip. The toggle and pommel joinlessly hold the barrel-shaped roll of hornbeam wood, which is automatically centred in the hand by its shape. The dagger is equipped with a high-quality sheath made of dark brown leather with a belt loop and place reinforcement. Supplied with a classy frame case for seemingly floating presentation, certificate of authenticity and individual serial number.

Specifications:

Steel: Damascus (see description)
Blade length: 5.314“ inch / 135 mm 
Total length: 10” inch / 254 mm
Handle length: 4.685" inch / 119 mm
Handle scales: Iron Wood

Blade Thickness: 5 mm
Overall weight 195 gr.

German Böker Tiger Damascus Folding Knife

Collector's knife *Serial numbered*

- Made in Solingen / Germany -

Introduction:

The impressive Boker Tiger- Damascus-adds a very special model to our series of pocket knives steeped in history. The collector's knife with a historical past is a real piece of living history and combines high-quality craftsmanship with authentic materials. Known worldwide as the Tiger, the Panzerkampfwagen VI was used by the Wehrmacht from the late summer of 1942. It is considered one of the most famous tanks in history, despite its modest production number of only 1350 units and the resulting low strategic importance. The development of the heavy tank can be traced back to 1937, and series production began in August 1942. Today, there are only seven preserved units, which are exhibited all over the world. Due to the low availability, the so-called Frankentiger was even assembled for this purpose from wreckage parts of different production years.

The tank parts we use come from a Tiger I of the Schwere Panzerabteilung 502, which was destroyed in combat in Latvia in the summer of 1944 in a heavily wooded area near the town of Bauska. Based on the wreckage found at the original excavation site, it was determined that this Tiger was an early to mid-production model. Examination of battle damage to the remains, military records and local historical accounts revealed that this Tiger tank collided with both a Russian T-34 medium tank and an SU-76 anti-tank gun, and was also damaged by a stationary 45-mm anti-tank gun. It is still unclear which of the impacts caused the most damage and sealed the fate of the Tiger. However, as several 76-mm fragments were lodged in the heavy armour, it is assumed that a nearby T-34 landed the decisive hits before it was destroyed 300 metres away, too.

Otto Carius and Albert Kerscher, two of the most successful tank commanders of the Second World War, were attempting to stop the advance of Soviet forces on Riga at the time, with the Schwere Panzerabteilung 502. The division was able to so devastatingly defeat the enemy blockade forces near Tukums that it was able to retreat to the Latvian Courland together with more than 500,000 other soldiers of the Heeresgruppe Nord. There the forces were encircled in the further course of the Soviet advance. The Kurland Cauldron served as a bridgehead and could be supplied by the Kriegsmarine via sea. It withstood six major attacks by Soviet forces until the unconditional surrender on 8 May, 1945.

The straight-edged Boker Tiger-Damascus is equipped with a unique Damascus blade made from the steelof the battle tank destroyed at Bauska. The non-stainless mosaic Damascus is forged for us by hand by Chad Nichols in the Intrepid pattern and is reminiscent of the tank tracks left in the ground by the Tiger's heavy tracks. Unlike conventional Damascus, the production of mosaic Damascus does not create layers, but complex Damascus bars are forged by hand into a mosaic in an elaborate and very complicated process. The ball-bearing blade is opened by a thumb stud and locked by a sturdy steel framelock with a stonewash finish, while a Hinderer lock-stop acts as an over-extension protection for the lock. The overall shape of the knife pays homage to the famous lines of the tank, while the decorative pivot screw is modelled on the main drive sprocket. The slightly contoured handle scales made of burlap Micarta are provided with precisely milled grooves, which are reminiscent of the characteristic surface structure of the Zimmerit coating of German armoured vehicles. With lanyard hole and milled clip (tip-up/r) witt steel ball. Handmade in the Boker Knife Manufactory in Solingen. Supplied with a classy suspended display, a certificate of authenticity and an individual serial number.

Specifications:

Steel: Damascus 
Blade length: 3.346“ inch / 85 mm 
Total length: 7.874” inch / 200 mm
Handle length: 4.527” inch / 115 mm
Handle scales: Micarta

Blade thickness: 4 mm
Overall weight 139 gr.

German Böker "Trench" Knife Grabendolch

- Made in Solingen / Germany -

Introduction:

During the positional war during the First World War and the resulting trench warfare, many of the insufficiently equipped soldiers developed auxiliary weapons, which were manufactured in field forges and workshops on and behind the front. In the course of the battles, however, it became clear that the soldiers' equipment and armament did not meet the requirements of this particular fighting style. In 1915 Boker was therefore commissioned by the Ministry of War to develop a compact combat knife that was ideally suited for precisely this purpose.
The true-to-the-original Boker Trench Knive also has a stainless steel blade made of C75. This carbon steel with an enormous edge retention requires appropriate care today as it did then. The massive stainless steel crossguard, the old official tang stamp on the blade, the local ribbed wood handle and the authentic sheath made of high-quality leather are also part of the original equipment. The knives are marked with a serial number.

Specifications:

Steel: C75 CARBON STEEL
Blade length: 5.669“ inch / 144 mm
Total length: 10.078” inch / 256 mm
Handle length: 4.409" inch / 112 mm
Handle scales: Walnut Wood

Blade Thickness: 3.39 mm
Overall weight 165 gr.

Additional informations about C75 steel:

C75 is a classic non-stainless carbon steel we use for special projects in our manufacture in Solingen. Carbon steel soon develops its typical blue-gray patina that is not a flaw but a natural property of the material.

Cudeman 120-F Full Tang Hunting Knife MT-5

Made by Cudeman in Spain 

Cudeman Survival Full Tang Knife with Böhler blade.

The Cudeman MT-5 is the brand's most famous knife. This design tops the list of best sellers as it was, is and will continue to be a top seller worldwide. Its design is unique and the weight balance is perfect. This model began to be marketed in 2012 and overtook its predecessor in sales, the historic Cudeman MT-1. This model has undergone major changes in its steel, design and in the leather sheath itself. It is currently manufactured in Böhler N-695 steel. It has a one-piece frame and satin-finished A-304 steel ferrules. In this new version its handle is made of green canvas with red spacers and has a firing pin knob at the end of its grip. On the table of its blade and on the firing pin knob itself, it has two pins to create a lance with a safety lanyard. The zipper on its spine makes the grip safe and reliable. In addition, its multi-position holster with loops and rivets allows it to be carried both vertically and horizontally and includes a flint and stone adapter. The design of this holster was the initial inspiration for similar holsters such as the Entresierras or Ent. 

Specifications:

Steel: BÖHLER N-695  59/60 HRC
Blade length: 4.331” inch / 110 mm
Total length: 8.858” inch / 225 mm
Handle length: 4.528” inch / 115 mm
Handle scales: Green Canvas with red spacer
Blade thickness: 5 mm
Knife weight 240 gr.

Description:

– Fixation of the Handle : Allen Stainless Steel Screws

– Blade shape : Drop-Point

– Grind : Full Flat Grind

– Blade Finish : Satin Finish

– Bolsters A-304 Stainless Steel

– Brwon Leather Sheath 

– Hole for a Safety Cord

– Sheath weight : 130 gr.

– Glass-Breaker

Cudeman 120-F-K Full Tang Hunting Knife MT-5

Made by Cudeman in Spain 

Cudeman Survival Full Tang Knife with Böhler blade.

The Cudeman MT-5 is the most famous piece of the brand. This design tops the list of best sellers because it was, is and continues to be a best seller all over the world. Its design is unique and maintains a perfect weight balance. The model, which went on sale in 2012, surpassed its predecessor, the historic Cudeman MT-1. This model has undergone major changes in terms of steel, design and the leather sheath itself. It is currently manufactured with Böhler N-695 steel. It is a full tang knife and has A-304 steel ferrules with satin finish. Its handle is green canvas with red fiber spacers, and at the end of the handle it has a striker pommel. There are two pins on the flat of the blade and on the pommel itself to make a lance with a safety lanyard. The zipper on the spine, makes for a secure and reliable grip. This version includes a Kydex sheath (self-made) with Tec-Lock adapter, flint and flint holder. We remind you that the Kydex holster cannot be purchased separately because each piece is molded with its own Kydex holster to avoid looseness and maintain a perfect fit to the holster. The Cudeman MT-5, a survival knife in its purest form.

Specifications:

Steel: BÖHLER N-695  59/60 HRC
Blade length: 4.331” inch / 110 mm
Total length: 8.858” inch / 225 mm
Handle length: 4.528” inch / 115 mm
Handle scales: Green Canvas with red spacer
Blade thickness: 5 mm
Knife weight 240 gr.

Description:

– Fixation of the Handle : Allen Stainless Steel Screws

– Blade shape : Drop-Point

– Grind : Full Flat Grind

– Blade Finish : Satin Finish

– Bolsters A-304 Stainless Steel

– Black Kydex Sheath 

– Hole for a Safety Cord

– Sheath weight : 200 gr.

– Glass-Breaker

Cudeman 120-FC Full Tang Hunting Knife MT-5

Made by Cudeman in Spain 

Cudeman Survival Full Tang Knife with Böhler blade.

The Cudeman MT-5 is the most famous piece of the brand. This design tops the list of best sellers because it was, is and continues to be a best seller all over the world. Its design is unique and maintains a perfect weight balance. The model, which went on sale in 2012, surpassed its predecessor, the historic Cudeman MT-1. This model has undergone major changes in terms of steel, design and the leather sheath itself. It is currently manufactured with Böhler N-695 steel. It is a full tang knife and has A-304 steel ferrules with satin finish. Its handle is green canvas with red fiber spacers, and at the end of the handle it has a striker pommel. There are two pins on the flat of the blade and on the pommel itself to make a lance with a safety lanyard. The zipper on the spine, makes the grip secure and reliable. The premium black leather sheath with red stitching is multi-position. The complete version includes the leather adapter with signal mirror, sharpening stone, paracord 550 red and flint. The perfect set of knife, sheath and accessories for survival.

Specifications:

Steel: BÖHLER N-695  59/60 HRC
Blade length: 4.331” inch / 110 mm
Total length: 8.858” inch / 225 mm
Handle length: 4.528” inch / 115 mm
Handle scales: Green Canvas with red spacer
Blade thickness: 5 mm
Knife weight 240 gr.

Description:

– Fixation of the Handle : Allen Stainless Steel Screws

– Blade shape : Drop-Point

– Grind : Full Flat Grind

– Blade Finish : Satin Finish

– Bolsters A-304 Stainless Steel

– Brwon Leather Sheath 

– Hole for a Safety Cord

– Sheath weight : 300 gr.

– Glass-Breaker

Cudeman 120-G or 120-GC Survival Knife MT-5

- Made by Cudeman in Spain -

- Made by Cudeman in Spain -

Cudeman Survival Knife with Böhler blade.

There are two Editions, Standard or Special.

The Special Edition has a luxury sheath with extras.

- Please select your desired version in the selection menu above -

Specifications:

Steel: BÖHLER N-695  59/61 HRC
Blade length: 4.331” inch / 110 mm
Total length: 8.858” inch / 225 mm
Handle length: 4.528” inch / 115 mm
Handle scales: Polished Walnut Wood with Detailed Red Line
Blade thickness: 5.33 mm
Knife weight 247 gr.

Description:

All versions.

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Drop-Point

– Grind: Full Flat Grind

– Blade Finish: Satin Finish

– Bolsters A-304 Stainless Steel

Standard Edition Sheath Version:

– Brown Leather Multi-position Sheath

– Hole for a Safety Cord

– Sheath weight : 87 gr.

– Glass-Breaker

Special Edition Sheath Version:

– Brown Leather

– Sheath Weight 280 gr.

– Hole for a Safety Cord

– Multi-Position Sheath

– Paracord 280 cm

– Firesteel

– Leather Loop with Accessories

– Sharpening Stone with Signal Mirror, Ruler (12cm), Compas and Sundial

Cudeman 120-GV Full Tang Hunting Knife MT-5

Made by Cudeman in Spain 

Cudeman Survival Full Tang Knife with Böhler blade.

The Cudeman MT-5 is the most famous piece of the brand. This design tops the list of best sellers because it was, is and continues to be a best seller all over the world. Its design is unique and maintains a perfect weight balance. This new version, which went on sale in 2012, surpassed its predecessor, the historic Cudeman MT-1. This knife has undergone major changes in terms of steel, design and the leather sheath itself. It is currently manufactured with Böhler N-695 steel. It is a full tang knife and has A-304 steel ferrules with satin finish. Its handle is G10 Green with black fiber spacers, and at the end of the handle it has a striker pommel. There are two pins on the flat of the blade and on the pommel itself to make a lance with a safety lanyard. The zipper on the spine, makes for a secure and reliable grip. The Cudeman MT-5, a survival knife in its purest form.

Specifications:

Steel: BÖHLER N-695  59/60 HRC
Blade length: 4.331” inch / 110 mm
Total length: 8.858” inch / 225 mm
Handle length: 4.528” inch / 115 mm
Handle scales: Green G10 with black spacer
Blade thickness: 5 mm
Knife weight 240 gr.

Description:

– Fixation of the Handle : Allen Stainless Steel Screws

– Blade shape : Drop-Point

– Grind : Full Flat Grind

– Blade Finish : Satin Finish

– Bolsters A-304 Stainless Steel

– Black Leather Sheath 

– Hole for a Safety Cord

– Sheath weight : 130 gr.

– Glass-Breaker

Cudeman 120-GV-K Full Tang Hunting Knife MT-5

Made by Cudeman in Spain 

Cudeman Survival Full Tang Knife with Böhler blade.

The Cudeman MT-5 is the most famous piece of the brand. This design tops the list of best sellers because it was, is and continues to be a best seller all over the world. Its design is unique and maintains a perfect weight balance. This version, which went on sale in 2012, surpassed its predecessor, the historic Cudeman MT-1. This new version has undergone major changes in terms of steel, design and the leather sheath itself. It is currently manufactured with Böhler N-695 steel. It is a full tang knife and has A-304 steel ferrules with satin finish. Its handle is G10 Green with black fiber spacers, and at the end of the handle it has a striker pommel. There are two pins on the flat of the blade and on the pommel itself to make a lance with a safety lanyard. The zipper on the spine, makes for a secure and reliable grip. The Cudeman MT-5, a survival knife in its purest form.

Specifications:

Steel: BÖHLER N-695  59/60 HRC
Blade length: 4.331” inch / 110 mm
Total length: 8.858” inch / 225 mm
Handle length: 4.528” inch / 115 mm
Handle scales: Green G10 with black spacer
Blade thickness: 5 mm
Knife weight 240 gr.

Description:

– Fixation of the Handle : Allen Stainless Steel Screws

– Blade shape : Drop-Point

– Grind : Full Flat Grind

– Blade Finish : Satin Finish

– Bolsters A-304 Stainless Steel

– Black Kydex Sheath 

– Hole for a Safety Cord

– Sheath weight : 200 gr.

– Glass-Breaker

Cudeman 120-GVC Full Tang Hunting Knife MT-5

Made by Cudeman in Spain 

Cudeman Survival Full Tang Knife with Böhler blade.

The Cudeman 120-GVC Knife is the most famous piece of the brand. This design tops the list of best sellers because it was, is and continues to be a best seller all over the world. Its design is unique and maintains a perfect weight balance. This new version, which went on sale in 2012, surpassed its predecessor, the historic Cudeman MT-1. This knife has undergone major changes in terms of steel, design and the leather sheath itself. It is currently manufactured with Böhler N-695 steel. It is a full tang knife and has A-304 steel ferrules with satin finish. Its handle is G10 Green with black fiber spacers, and at the end of the handle it has a striker pommel. There are two pins on the flat of the blade and on the pommel itself to make a lance with a safety lanyard. The zipper on the spine, makes for a secure and reliable grip. The Cudeman MT-5, a survival knife in its purest form.

Specifications:

Steel: BÖHLER N-695  59/60 HRC
Blade length: 4.331” inch / 110 mm
Total length: 8.858” inch / 225 mm
Handle length: 4.528” inch / 115 mm
Handle scales: Green G10 with black spacer
Blade thickness: 5 mm
Knife weight 240 gr.

Description:

– Fixation of the Handle : Allen Stainless Steel Screws

– Blade shape : Drop-Point

– Grind : Full Flat Grind

– Blade Finish : Satin Finish

– Bolsters A-304 Stainless Steel

– Black Leather Sheath 

– Hole for a Safety Cord

– Sheath weight : 300 gr.

– Glass-Breaker

Cudeman 120-K / 120-KC Classic Hunting & Survival Knife MT-5

- Made by Cudeman in Spain -

Cudeman Survival Knife with Böhler blade.

There are two Editions, Standard or Special.

The Special Edition has a luxury sheath with extras.

- Please select your desired version in the selection menu above -

Specifications:

Steel: BÖHLER N-695  59/60 HRC
Blade length: 4.331” inch / 110 mm
Total length: 8.858” inch / 225 mm
Handle length: 4.528” inch / 115 mm
Handle scales: Cocobolo Wood
Blade thickness: 5.33 mm
Knife weight 247 gr.

Description:

All versions.

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Drop-Point

– Grind: Full Flat Grind

– Blade Finish: Satin Finish

– Bolsters A-304 Stainless Steel

Standard Edition Sheath Version:

– Brown Leather Multi-position Sheath

– Hole for a Safety Cord

– Sheath weight: 87 gr.

– Glass-Breaker

Special Edition Sheath Version:

– Brown Leather

– Sheath Weight 280 gr.

– Hole for a Safety Cord

– Multi-Position Sheath

– Paracord 280cm

– Firesteel

– Leather Loop with Accessories

– Sharpening Stone with Signal Mirror, Ruler (12cm), Compas and Sundial

Cudeman 120-M or 120-MC or 120-M-K Survival Knife MT-5

- Made by Cudeman in Spain -

Cudeman Survival Knife with Böhler blade.

There are three Editions, Standard, Special or KYDEX.

The Special Edition has a luxury sheath with extras.

- Please select your desired version in the selection menu above -

Specifications:

Steel: BÖHLER N-695  59/61 HRC
Blade length: 4.331” inch / 110 mm
Total length: 8.858” inch / 225 mm
Handle length: 4.528” inch / 115 mm
Handle scales: Black Micarta with Detailed Red Line
Blade thickness: 5.33 mm
Knife weight 247 gr.

Description:

All versions.

– Fixation of the Handle : Allen Stainless Steel Screws

– Blade shape: Drop-Point

– Grind: Full Flat Grind

– Blade Finish: Satin Finish

– Bolsters A-304 Stainless Steel

Standard Edition Sheath Version:

– Black Leather Multi-position Sheath

– Hole for a Safety Cord

– Sheath weight: 87 gr

– Glass-Breaker

Special Edition Sheath Version:

– Black Leather

– Sheath Weight 280 gr.

– Hole for a Safety Cord

– Multi-Position Sheath

– Paracord 280 cm

– Firesteel

– Leather Loop with Accessories

– Sharpening Stone with Signal Mirror, Ruler (12cm), Compas and Sundial

KYDEX Edition Sheath Version:

– Hole for a Safety Cord

– Glass-Breaker

– Firesteel

– Sheath Weight 56 gr.

Cudeman 124-M or 124-MC or 124-M-K JJ.SK1 Bushcraft Knife

- Made by Cudeman in Spain -

Cudeman Survival Knife with Böhler blade.  *Serial numbered*

There are three Editions, Standard, Special or KYDEX.

The Special Edition has a luxury sheath with extras.

- Please select your desired version in the selection menu above -

Specifications:

Steel: BÖHLER N-695  59/61 HRC
Blade length: 4.724” inch / 120 mm
Total length: 9.252” inch / 235 mm
Handle length: 4.528” inch / 115 mm
Handle scales: Black Micarta with Detailed Red Line
Blade thickness: 5.33 mm
Knife weight 277 gr.

Description:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Clip-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

Standard Edition Sheath Version:

– Black Leather Multi-position Sheath

– Hole for a Safety Cord

– Glass-Breaker

– Groove on the Spine to make Sparks

– Indentation for Advanced Fire Lighting with Wooden Bow Technique

– Sheath weight : 163 gr.

Special Edition Sheath Version:

– Black Leather Multi Position Sheath

– Sheath Weight 280 gr.

– Hole for a Safety Cord

– Paracord 280 cm

– Firesteel

– Leather Loop with Accessories

– Sharpening Stone with Signal Mirror, Ruler (12cm), Compas and Sundial

– Groove on the Spine to make Sparks

– Indentation for Advanced Fire Lighting with Wooden Bow Technique

KYDEX Edition Sheath Version:

– Hole for a Safety Cord

– Glass-Breaker

– Firesteel

– Groove on the Spine to make Sparks

– Indentation for Advanced Fire Lighting with Wooden Bow Technique

– Sheath Weight 163 gr.

Cudeman 125-M or 125-MC  JJ.SK2 Bushcraft Survival Knife

- Made by Cudeman in Spain -

Cudeman Survival Knife with Böhler blade. Serial numbered.

There are two Editions, Standard or Special.

The Special Edition has a luxury sheath with extras.

- Please select your desired version in the selection menu above -

Specifications:

Steel: BÖHLER N-695  59/61 HRC
Blade length: 6.102” inch / 155 mm
Total length: 10.630” inch / 270 mm
Handle length: 4.528” inch / 115 mm
Handle scales: Black Micarta with Detailed Red Line
Blade thickness: 5.33 mm
Overall weight 318 gr.

Description:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Clip-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

Standard Edition Sheath Version:

– Black Leather Multi-position Sheath

– Hole for a Safety Cord

– Glass-Breaker

– Groove on the Spine to make Sparks

– Indentation for Advanced Fire Lighting with Wooden Bow Technique

– Firesteel

– Paracord 280 cm

– Sheath weight : 163 gr.

Special Edition Sheath Version:

– Black Leather Multi Position Sheath

– Sheath Weight 394 gr.

– Glass-Breaker

– Hole for a Safety Cord

– Paracord 280 cm

– Firesteel

– Leather Loop with Accessories

– Groove on the Spine to make Sparks

– Indentation for Advanced Fire Lighting with Wooden Bow Technique

– Sharpening Stone with Signal Mirror, Ruler (12cm), Compas and Sundial

Cudeman 140-M-K Asalto Outdoor Bushcraft Knife

- Made by Cudeman in Spain -

Kydex Sheath included.

Introduction:

Cudeman Bushcraft Knife with Böhler blade. Serial numbered.

Specifications:

Steel: BÖHLER N-695 59/61 HRC
Blade length: 6.890” inch / 145 mm
Total length: 11.614” inch / 265 mm
Handle length: 4.724” inch / 120 mm
Handle scales: Black Micarta with Detailed Red Line
Blade Width: 5 mm
Knife weight 380 gr.

Description:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Drop-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

– KYDEX Black Sheath

– Hole for a Safety Cord

– Glass-Breaker

– Sheath Weight: 211 gr.

Cudeman 147-L "ALAZÁN" Hunting Knife

- Made by Cudeman in Spain -

The Alazán (143-L) is made with a natural olive wood handle, carefully selected for its unique beauty and extraordinary durability. It features black spacers that enhance its aesthetics and harmonize with the exclusive engraving on the handle: the head of the iconic Cudeman logo, crafted with great precision to add character and personality.
The blade of the Alazán is made of molybdenum vanadium steel, a material renowned for its strength, edge retention, and reliable performance in demanding conditions. The combination of this steel with the ergonomics of the handle makes this model a versatile and sturdy knife, ideal for bushcraft, survival, and outdoor use.
Each Alazán (143-L) comes with a handmade brown leather sheath with black stitching that complements the knife's aesthetics and ensures an elegant presentation consistent with its finishes.

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 3.740” inch / 95 mm 
Total length: 8.267” inch /  210 mm
Handle length: 4.527” inch / 115 mm
Handle scales: Satin Olive Wood
Blade thickness: 3.8 mm
Knife weight 170 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 60 gr.

– Fixation of the Handle: Flat-Head Rivets

– Blade Shape: Standard

– Grind: Hollow Grind

– Blade Finish: Satin Finish

– Hole for Safety Cord

Cudeman 147-R Hunting Knife

(Last available piece!)

- Made by Cudeman in Spain -

Cudeman Full Tang Hunting Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 4.134331” inch / 110 mm
Total length: 8.858” inch /  225 mm
Handle length: 4.528” inch / 115 mm
Handle scales: Red Stamina
Blade thickness: 4 mm
Knife weight 156 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 53 gr.

– Fixation of the Handle: Flat-Head Rivets

– Blade Shape: Standard

– Grind: Hollow Grind

– Blade Finish: Satin Finish

– Hole for Safety Cord

Cudeman 148-M / 148-MC BUSHCRAFT Knife

- Made by Cudeman in Spain -

Cudeman Survival Knife with Böhler blade.

There are two Editions, Standard or Special.

The Standard Leather Sheath is included.

The Special Edition has a luxury sheath with extras.

- Please select your desired version in the selection menu above -

Specifications:

Steel: BÖHLER N-695 59/61 HRC 
Blade length: 4.331” inch / 110 mm
Total length: 8.858” inch / 225 mm
Handle length: 4.527” inch / 115 mm
Handle scales: Black Micarta with Detailed Red Line
Blade thickness: 0.157” inch / 4 mm
Net weight 204 gr.

Additional Information:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Standard

– Grind: Scandinavian Grind

Standard Edition Sheath:

– Hole for a Safety Cord

– Sheath weight: 188 gr.

Special Edition Sheath:

– Hole for a Safety Cord

– Multi-Position Sheath

– Paracord 280 cm

– Firesteel

– Leather Loop with Accessories

– Sharpening Stone with Signal Mirror, Ruler (12cm), Compas and Sundial

– Sheath Weight 286 gr.

Cudeman 148-X or 148-XC Survival Knife

- Made by Cudeman in Spain -

Cudeman Bushcraft Knife with Böhler blade.

The Standard Leather Sheath is included.

There are two Editions, Standard or Special.

The Special Edition has a luxury sheath with extras.

- Please select your desired version in the selection menu above -

Specifications:

Steel: Böhler Steel / 54-56 HRC
Blade length: 4.331” inch / 110 mm
Total length: 8.858” inch / 225 mm
Handle length: 4.527” inch / 115 mm
Handle scales: Brown Micarta with Detailed Red Line
Blade thickness: 0.157” inch / 4 mm
Net weight 204gr.

Additional Information:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Standard

– Grind: Scandinavian Grind

Standard Edition Sheath:

– Hole for a Safety Cord

– Sheath weight: 188 gr.

Special Edition Sheath:

– Hole for a Safety Cord

– Multi-Position Sheath

– Paracord 280 cm

– Firesteel

– Leather Loop with Accessories

– Sharpening Stone with Signal Mirror, Ruler (12cm), Compas and Sundial

– Sheath Weight 286 gr.

Cudeman ENT 158-L or 158-LC  Bushcraft Knife

- Made by Cudeman in Spain -

Cudeman Hunting Knife with BÖHLER blade.

There are two Editions: Standard or Special.

The Special Edition has a luxury sheath with extras.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: BÖHLER N-690CO 60 HRC 
Blade length: 4.724” inch / 120 mm
Total length: 9.252” inch / 235 mm
Handle length: 4.527” inch / 115 mm
Handle scales: Scandinavian Wood with Detailed Red Line
Blade thickness: 4.5 mm
Net weight 274 gr.

Additional Information:

All versions.

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Standard

– Grind: Scandinavian Grind

Standard Edition Sheath:

– Hole for a Safety Cord

– Multi-Positioning Sheath

– Black Leather Sheath

– Sheath weight: 115 gr.

Special Edition Sheath:

– Hole for a Safety Cord

– Multi-Position Sheath

– Paracord 280 cm

– Firesteel

– Leather Loop with Accessories

– Sharpening Stone with Signal Mirror, Ruler (12cm), Compas and Sundial

– Sheath Weight 270 gr.

Cudeman 158-M or 158-MC ENT Bushcraft Knife 

- Made by Cudeman in Spain -

Cudeman Hunting Knife with BÖHLER blade.

There are two Editions: Standard or Special.

The Special Edition has a luxury sheath with extras.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: BÖHLER N-690CO 60 HRC 
Blade length: 4.724” inch / 120 mm
Total length: 9.252” inch / 235 mm
Handle length: 4.527” inch / 115 mm
Handle scales: Black Micarta with Detailed Red Line
Blade thickness: 4.5 mm
Knife weight 274 gr.

Additional Information:

All versions.

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Standard

– Grind: Scandinavian Grind

Standard Edition Sheath:

– Hole for a Safety Cord

– Multi-Positioning Sheath

– Black Leather Sheath

– Sheath weight: 115 gr.

Special Edition Sheath:

– Black Leather Sheath

– Hole for a Safety Cord

– Multi-Position Sheath

– Paracord 280 cm

– Firesteel

– Leather Loop with Accessories

– Sharpening Stone with Signal Mirror, Ruler (12cm), Compas and Sundial

– Sheath Weight 270 gr.

Cudeman 161-L Alaska Knife Set

- Made by Cudeman in Spain -

Introduction:

Cudeman Hunting Knife Set with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Molybdenum Steel 54/56 HRC

Blade length large machete: 5.906” inch / 150 mm
Blade length small knife: 3.150” inch / 80 mm

Total length large machete: 10.433" inch / 265 mm
Total length small knife: 6.693" inch / 170 mm

Handle length large machete: 4.528” inch /  115 mm
Handle length small knife: 3.543” inch /  90 mm

Blade thickness large machete: 4.5 mm
Blade thickness small knife: 3 mm
Handle scales: Satin Olive Wood

Knife weight 381-62 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 126 gr.

– Fixation of the Handle: Flat-Head Rivets

– Blade shape: Macheta/Drop-Point

– Grind: Full Flat/Hollow Grind

– Blade Finish: Satin Finish

– Hole for Safety Cord

Cudeman Kaiman 183-JV Opus Hunting Knife

- Made by Cudeman in Spain -

Cudeman Hunting Knife with Böhler blade.

THE CUDEMAN KAIMAN: A HISTORY OF DESIGN AND QUALITY!

The Cudeman Kaiman has been designed and manufactured in collaboration with Opus Knives Ⓡ for all your hunting and bushcraft outings. This model is a true adventure companion for those who love bushcraft, hunting and outdoor activities in general. Made from high-quality Böhler N695 steel and with a green Juma handle, this knife is an indispensable tool for professionals and enthusiasts looking for durability and performance on their expeditions. The power of the Kaiman can be put to the test for the most demanding tasks. As a wild animal, inhabiting the most hostile places on the planet, reincarnated as a knife with an aggressive and stylish design, the Cudeman Kaiman knife stands out for its ergonomic design and its 16-centimeter blade with 59/60 HRc, ideal for cutting and quartering tasks in wild environments. Its Böhler N695 steel offers exceptional resistance to corrosion and a durable edge, ensuring optimum performance in any situation. This knife is perfect for activities such as wood carving, food preparation, shelter construction and especially hunting. Its versatility and robustness make it a must-have tool for any survival kit or bushcraft backpack. In short, the Cudeman Kaiman knife is a safe and versatile bet for those looking for quality, beauty, strength and versatility in a cutting tool. Bring out your wild side with this collectible and beautiful yet practical tool! 

Specifications:

Steel: BÖHLER N-695 59/60 HRC
Blade length: 6.299” inch / 160 mm 
Total length: 11.023” inch /  280 mm
Handle length: 4.724” inch / 120 mm
Handle scales: Green JUMA with Black spacer
Blade thickness: 5 mm
Knife weight 335 gr.

Additional Information:

– Black Leather Sheath included

– Sheath Weight: 145 gr.

– Fixation of the Handle: Flat aluminum rivets

– Grind: Flat Grind

– Blade Finish: Satin Finish

– Hole for Safety Cord

– Black Leather Sheath 

Cudeman 206-GV Bushcrafter BS-9 Anniversary Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman Bushcraft Knife with Böhler blade.

Specifications:

Steel: BÖHLER N-690CO 60-61 HRC 
Blade length: 4.527” inch / 115 mm 
Total length: 9.055” inch / 230 mm 
Handle length: 4.527” inch / 115 mm
Handle scales: Green G10 with Detailed Black Line
Blade thickness: 5 mm
Net weight 270 gr.

Additional Information:

– Fixation of the Handle : Flat Aluminum Rivets

– Blade Finish: Satin Finish

– Grind: Width Scandi Grind

– Black Leather Sheath

– Sheath weight: 140 gr.

Cudeman 206-GVC Bushcrafter BS-9 Anniversary Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman Bushcraft Knife with Böhler blade.

Specifications:

Steel: BÖHLER N-690CO 60-61 HRC 
Blade length: 4.527” inch / 115 mm 
Total length: 9.055” inch / 230 mm 
Handle length: 4.527” inch / 115 mm
Handle scales: Green G10 with Detailed Black Line
Blade thickness: 5 mm
Net weight 270 gr.

Additional Information:

– Fixation of the Handle : Flat Aluminum Rivets

– Blade Finish: Satin Finish

– Grind: Width Scandi Grind

– Black Leather Sheath

– Sheath weight: 300 gr.

Leather Sheath details:

• Multi-position holster
• Complete black leather sheath
• Sharpening stone
• Signal mirror
• Sundial
• Flint
• Red paracord (2.80 m)