All

Fallkniven "F2z" Pescador Fish Fillet Knife

- Made by Fällkniven -

Introduction:

This knife has a broad range of use. The short, fairly slender blade works well for filleting, cutting and cleaning fish. The short blade makes the knife  a favourite in the kitchen. It cuts anything quickly and precisely.

F2, F3 and F4 are a concept of high-quality knives intended for opening, butchering and cleaning fish. They are based on the well shaped, secure F handle, and to that we have developed three blade shapes, each adapted to its special purpose. Unlike many other manufacturers we persist in using really good edge steel and even if it leads to products that are 5 or 10 times more expensive, we feel that the concept is right. A cheap dressing knife is characterised by poor edge retention, leading to it fairly soon being honed to destruction, while a knife from us can be used for decades. Not only does this lead to good overall economy, but it also offers satisfaction and safety at work. Naturally, it should not be put away after the hunting, but can also serve its purpose in the kitchen. The knives are supplied with a zytel sheath. The best, simplest and quickest way to sharpen them is with a diamond whetstone or diamond sharpening steel.

Specifications:

Steel: Laminated VG7 HRC 59
Blade length: 4.33" inch / 110 mm
Total length: 9.06” inch / 230 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Thermorun

Blade thickness: 2.5 mm
Knife weight 89 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Broad Tang

Blade Finish: Satin

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven F3z Carnicero Butcher Knife

- Made by Fällkniven -

Introduction:

This is the perfect dressing and skinning knife! The form of the blade is ideal to skin somewhat larger game and then open it before hanging. Since the edge can be made thin without losing in strength, the edge will easily part the thickest skin, which the user should perhaps bear in mind – to avoid mishaps.

F2, F3 and F4 are a concept of high-quality knives intended for opening, butchering and cleaning fish. They are based on the well shaped, secure F handle, and to that we have developed three blade shapes, each adapted to its special purpose. Unlike many other manufacturers we persist in using really good edge steel and even if it leads to products that are 5 or 10 times more expensive, we feel that the concept is right. A cheap dressing knife is characterised by poor edge retention, leading to it fairly soon being honed to destruction, while a knife from us can be used for decades. Not only does this lead to good overall economy, but it also offers satisfaction and safety at work. Naturally, it should not be put away after the hunting, but can also serve its purpose in the kitchen. The knives are supplied with a zytel sheath. The best, simplest and quickest way to sharpen them is with a diamond whetstone or diamond sharpening steel.

Specifications:

Steel: Laminated VG7 HRC 59
Blade length: 5.12" inch / 130 mm
Total length: 9.84” inch / 250 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Thermorun

Blade thickness: 2.5 mm
Knife weight 101 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Broad Tang

Blade Finish: Satin

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven F4z Fileteador Butcher Knife

- Made by Fällkniven -

Introduction:

This is the perfect dressing and skinning knife! The form of the blade is ideal to skin somewhat larger game and then open it before hanging. Since the edge can be made thin without losing in strength, the edge will easily part the thickest skin, which the user should perhaps bear in mind – to avoid mishaps.

F2, F3 and F4 are a concept of high-quality knives intended for opening, butchering and cleaning fish. They are based on the well shaped, secure F handle, and to that we have developed three blade shapes, each adapted to its special purpose. Unlike many other manufacturers we persist in using really good edge steel and even if it leads to products that are 5 or 10 times more expensive, we feel that the concept is right. A cheap dressing knife is characterised by poor edge retention, leading to it fairly soon being honed to destruction, while a knife from us can be used for decades. Not only does this lead to good overall economy, but it also offers satisfaction and safety at work. Naturally, it should not be put away after the hunting, but can also serve its purpose in the kitchen. The knives are supplied with a zytel sheath. The best, simplest and quickest way to sharpen them is with a diamond whetstone or diamond sharpening steel.

Specifications:

Steel: Laminated VG10 HRC 59
Blade length: 5.91" inch / 150 mm
Total length: 10.63” inch / 270 mm
Handle length: 4.72” inch / 120 mm
Handle scales: Thermorun

Blade thickness: 2.5 mm
Knife weight 101 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Broad Tang

Blade Finish: Satin

VG10: A well known high alloy molybdenum/cobalt steel

Fallkniven H1z Elmax Bushcraft Hunting Knife

- Made by Fällkniven -

Introduction:

The Fallkniven H1 knife a very handy knife of impressive strength. The H1 is our first true hunting knife and is filled with the history of classic north Scandinavian knifemaking art. Due to this heritage the H1 lacks a standard finger guard, but grip safety is enhanced through its ergonomically shaped textured handle made of thermorun plastic.. Due to the grip shape and handle design, the H1 is for experienced hunters and outdoorsman due to the handle shape. you should be an experienced hunter or outdoorsman to ensure you who can safely use this classic yet advanced hunting knife.

Sheath
The blade cover for the H1 is an injection molded zytel sheath that offers a streamlined, safe and strong combination of qualities that should satisfy all users. The sheath can be operated with one hand operated, and is very easy to keep clean.

Steel
The blade is a solid blade made of powder steel, Elmax SuperClean from Uddeholm, Sweden. This means a stronger blade that keeps its sharpness significantly longer. After testing and using this steel for a number of years we can conclude that it is a very high performing and affordable steel. It has a very good balance between sharpness and strength, but is still relatively easy to sharpen. The hardness sits around 61-62 HRC, a hardness that we found ideal for this steel in terms of sharpness and strength.

Blade function
The special design of the H1 blade is for processing game when hunting. The H1 knife may look different but it works very well. In many respects the performance of a knife depends on the person actually holding the knife. Knowing where and how to place the correct incision into game is beyond the knife. Hunters need to avoid bad cuts, keep hair off the meat, prevent sliced organs, and minimize the blood flowing on the game and the hunter. The combination of a skilled hunter and a well-designed knife is unbeatable! The incisions are well placed, the game is kept clean, and no unnecessary cuts into the meat or organs.

Blade design
The Fallkniven H1 is what an optimal hunting knife looks like. We believe that the perfect hunting blade length is around four to five inches, not the small two-inch blades that are often sold to hunters. The H1 hunting knife is close in design to a professional butcher’s knife. Proper blade length must be combined with a blade shape that provides a long, effective skinning edge, and most importantly a tip that is shaped properly for penetration performance because a hunting knife must function well along the edge and at the tip. The tip of the H1 hunting knife is designed aid in skinning by penetrating the hide without cutting into the meat.

Trendsetter
The Fallkniven H1 hunting knife will quickly become your first choice for processing game and carrying on your hunting trips. Every feature of the H1 is matched for maximum capability in many hunting situations. From the sharp, strong and tough blade steel with a 0.2″ blade thickness, to the razor-sharp convex-ground blade, to the straight and ergonomic handle in thermorun rubber, to the extremely compact size, the H1 will serve the demanding needs of the experienced hunters and true outdoorsmen.

Specifications:

Steel: ELMAX / HRC 61-62
Blade length: 3.94" inch / 100 mm
Total length: 8.27” inch / 210 mm
Handle length: 4.33 inch / 110 mm
Handle scales: Thermorun

Blade thickness: 5 mm
Knife weight 174 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Tang: Protruding Broad Tang

Handle: Lanyard Hole

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven Kolt KKLz Hunting Knife

- Made by Fällkniven -

Introduction:

The Kolt Knife is probably Fallkniven´s best dry meat knife, no other knife is as good as the KK when it comes to cutting thin slices of a piece of dried or smoked meat. Of course, the knife can be used for a lot more and the simple reason is the handy size. In its original form the Kolt Knife had a very simple blade cover. However, many fans of the KK knife today were interested in a traditionally shaped leather sheath. We are now offering the KK frock knife with well-fitting sheath made of heavy black leather of the best quality. A small zytel edge cover is also included.

Specifications:

Steel: Laminated Cos HRC 60
Blade length: 3.35" inch / 85 mm
Total length: 7.28” inch / 185 mm
Handle length: 3.94 inch / 100 mm
Handle scales: Thermorun

Blade thickness: 3.85 mm
Knife weight 84 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather & Zytel Edge Cover

Tang: Broad Tang

Finger Guard: Stainless Steel

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven Tungsten Carbine S1L Forest Knife

- Made by Fällkniven -

Introduction:

The Fallkniven S1 Forest Knife is one of the best knife ever made for outdoor adventure and fishing. The sturdy blade of the S1 made of extremely strong laminated VG7 custom stainless steel. The edge of the S1 is a convex grind for extra strong cutting power. The modified clip point blade shape works extremely well for penetrating tough materials, and the long curved edge is ideal for skinning. The blade of the S1 is long enough for mild chopping work. With a full 5mm (0.2″) thickness, there is little chance the blade could ever break. The checkered handle of the S1 provides an excellent grip in all conditions even when your hands are cold and wet. If you are looking for top quality classic knife, the Fallkniven S1 is one of the best in the world. The sheath is our open top dangler black leather sheath.

Blade length: 5.12" inch / 130 mm
Total length: 9.72” inch / 247 mm
Handle length: 4.61” inch / 117 mm
Handle scales: Thermorun

Blade thickness: 5 mm
Knife weight 193 gr.

Additional Information:

Edge: Convex

Sheath Included: Leather

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Blade: Satin Finish

Fallkniven Taiga Forester TF2z Hunting Knife

- Made by Fällkniven -

Introduction:

The Taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. What is a special about these knives is the very secure plastic sheath where a specially designed locking system ensures that the knife is properly locked when it is placed in the sheath. It works regardless of weather and wind, sand or snow.

Specifications:

Steel: Laminated Cos HRC 60
Blade length: 4.72" inch / 120 mm
Total length: 9.25” inch / 235 mm
Handle length: 4.53” inch / 115 mm
Handle scales: Thermorun

Blade thickness: 5 mm
Knife weight 120 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Finger Guard: Stainless Steel

Tang: Broad Tang

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven Taiga Hunter TH2z Hunting Knife

- Made by Fällkniven -

Introduction:

The Taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. What is special about these knives is the very secure plastic sheath where a specially designed locking system ensures that the knife is properly locked when it is placed in the sheath. It works regardless of weather and wind, sand, or snow.

Specifications:

Steel: Laminated Cos HRC 60
Blade length: 3.31" inch / 84 mm
Total length: 7.40” inch / 188 mm
Handle length: 4.09” inch / 104 mm
Handle scales: Thermorun

Blade thickness: 4.5 mm
Knife weight 116 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Finger Guard: Stainless Steel

Tang: Broad Tang

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven WM1L Hunting Knife

- Made by Fällkniven -

Introduction:

More than half the world’s population is female – and yet model WM is probably the first sheath knife designed from scratch to suit the hands and requirements of WoMen. The non-aggressive blade design, the safe well-tailored handle, the robust leather sheath – everything breathes functionality. The improved convex ground blade provides a blade profile which cuts with ease, while giving a sharp edge suitable for whittling. The comfortable, ergonomically designed handle gives a good, secure grip even in wet or cold hands and enables full control of the edge positioning. The knife is equipped with a hygienic zytel sheath or a well sewn leather sheath.

Specifications:

Steel: Laminated VG7 HRC 60
Blade length: 3.03" inch / 77 mm
Total length: 6.89” inch / 175 mm
Handle length: 3.86 inch / 98 mm
Handle scales: Thermorun

Blade thickness: 3.5 mm
Knife weight 77 gr.

Additional Information:

Edge: ICE (Improved Convex Edge)

Sheath Included: Leather

Tang: Broad Tang

FOX 573 CF E.D.C Lockback Folding Knife

- Made by Fox Knives in Italy -

Design by: "Fox Knives"

Introduction:

E.D.C. (Every Day Carry) Knife. This is an elegant pocket knife from Fox, which is characterized by its beautiful design and also by its high quality

Specifications:

Steel: stainless steel 440C HRC 55-57 
Blade length: 2.76" inch / 70 mm
Total length: 6.69” inch / 170 mm
Handle length: 3.94” inch / 100 mm
Handle scales: Carbon fiber

Blade thickness: 2 mm
Overall weight 30 gr.

Additional Information:

Blade Coating: satin

Sheath: Included

FOX Blackbird FX-591 Folding Knife

- Made by Fox Knives in Italy -

- Design by: "Bastinelli" -

Introduction:

Bastinelli

“Generally, for all my design, I always try to associate a perfect ergonomics, and a real utility in accordance with the needs of customers, civilians or professionals”.

Specifications:

Steel: stainless steel N690Co HRC 58-60
Blade length: 2.55" inch / 65 mm
Total length: 6.69” inch / 170 mm
Handle length: 4.13” inch / 105 mm
Handle scales: G10 OD Black

Blade thickness: 3 mm
Overall weight 110 gr.

Additional Information:

Blade Coating: black Idroglider
Clip: stainless steel 420J2B - reversible
Back Ring: 6082 alluminum

FOX Blackbird "FX-591 OD" Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bastinelli"

Introduction:

Bastinelli

“Generally, for all my design, I always try to associate a perfect ergonomics, and a real utility in accordance with the needs of customers, civilians or professionals”.

Specifications:

Steel: stainless steel N690Co HRC 58-60
Blade length: 2.55" inch / 65 mm
Total length: 6.69” inch / 170 mm
Handle length: 4.13” inch / 105 mm
Handle scales: G10 OD green

Blade thickness: 3 mm
Overall weight 110 gr.

Additional Information:

Blade Coating: black Idroglider 
Clip: stainless steel 420J2B - reversible
Back Ring: 6082 alluminum

FOX "Blackbird FX-591" ODSW Folding Knife

- Made by Fox Knives in Italy -

Design by: "Bastinelli"

Introduction:

Bastinelli

“Generally, for all my design, I always try to associate a perfect ergonomics, and a real utility in accordance with the needs of customers, civilians or professionals”.

Specifications:

Steel: stainless steel N690Co HRC 58-60
Blade length: 2.55" inch / 65 mm
Total length: 6.69” inch / 170 mm
Handle length: 4.13” inch / 105 mm
Handle scales: G10 OD green

Blade thickness: 3 mm
Overall weight 110 gr.

Additional Information:

Blade Coating: stone washed
Clip: stainless steel 420J2B - reversible
Back Ring: 6082 alluminum

FOX Blackbird FX-591 TK Folding Knife

- Made by Fox Knives in Italy -

- Design by: "Bastinelli" -

Introduction:

Bastinelli:

“Generally, for all my design, I always try to associate a perfect ergonomics, and a real utility in accordance with the needs of customers, civilians or professionals”.

Specifications:

Steel: stainless steel N690Co HRC 58-60
Blade length: 2.55" inch / 65 mm
Total length: 6.69” inch / 170 mm
Handle length: 4.13” inch / 105 mm
Handle scales: G10 blue

Blade thickness: 3 mm
Overall weight 110 gr.

Additional Information:

Training Blade

Blade Coating: stone washed
Clip: stainless steel 420J2B - reversible
Back Ring: 6082 alluminum

FOX Bushman FX-609 OD Bushcraft Knife

- Made by Fox Knives in Italy -

- Design by: "FOX Knives" -

Introduction:

The Fox Bushman knife, is an incredibly strong bushcraft knife that is almost unbreakable and can withstand the toughest challenges. The Bushman leather sheath can be used both in vertical and horizontal position thanks to the separable loops.

Specifications:

Steel: D2 stainless steel HRC 59-61
Blade length: 6.30" inch / 160 mm
Total length: 11.42” inch / 290 mm
Handle length: 5.12” inch / 130 mm
Handle scales: Canvas Micarta OD Green

Blade thickness: 5 mm
Overall weight 370 gr.

Additional Information:

Blade Coating: Black Idroglider stone washed

Leather Sheath: Included

Handle: Hole for Safety Cord

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.

FOX Chiroptera Karambit FX-590 Folding Knife

- Made by Fox Knives in Italy -

Design by: "Richard Derespina"

Introduction:

I based this Karambit’s blade profile on a Bat’s Wing (Chiroptera). The blade like the Bat’s wing is an extension of the user. Humans, however, must train to become comfortable with the blade, thereby creating the necessary muscle memory for instinctive responses.

Richard Derespina

“I have been making Karambits since 1999. My design is ergonomic and geometry”.

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 2.56" inch / 65 mm
Total length: 6.10” inch / 155 mm
Handle length: 3.54” inch / 90 mm
Handle scales: G10 black

Blade thickness: 3 mm
Overall weight 110 gr.

Additional Information:

Blade Coating: Cerakote™ black

Clip: stainless steel 420J2B - reversible

Back Ring: T6-6082 aircraft aluminum

FOX Fairbairn Sykes FX-592 & FX-592 W Dagger

- Made by Fox Knives in Italy -

Design by: "Hill Knives".

Introduction:

Hill Knives:

“Dutch Commando Dagger is Based on the original Fairbairn Sykes design. It is a collector’s knife to honor the special forces of the world.”

The Dutch Knifemaking company Hill Knives was founded in 1979 by Frans van den Heuvel † (father) and Albert van den Heuvel (son), who both have a technical background as toolmakers. “What makes Hill Knives extraordinary is our passion and drive to create the ultimate quality and design when it comes to our knives".

- Please select your desired version in the selection menu above -

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 6.69" inch / 170 mm
Total length: 11.81” inch / 300 mm
Handle length: 5.12” inch / 130 mm
Handle: Anodized T6-6082 black anodized or Walnut wood

Blade thickness: 5 mm
Overall weight 205 gr.

Additional Information:

Blade Coating: Physical Vapor Deposition (PVD)

Leather Sheath: Included

PVD
(Physical Vapor Deposition) is a variety of vacuum deposition methods used to deposit thin films by the condensation of a vaporized form of the desired film material onto various workpiece surface. The coating method involves purely physical process such as high temperature vacuum evaporation with subsequent condensation.

FOX Fairbairn Sykes FX-592 AF Dagger (double edged)

- Made by Fox Knives in Italy -

Design by: "Hill Knives".

Introduction:

Hill Knives:

“Dutch Commando Dagger is Based on the original Fairbairn Sykes design. It is a collector’s knife to honor the special forces of the world.”

The Dutch Knifemaking company Hill Knives was founded in 1979 by Frans van den Heuvel † (father) and Albert van den Heuvel (son), who both have a technical background as toolmakers. “What makes Hill Knives extraordinary is our passion and drive to create the ultimate quality and design when it comes to our knives".

With leather sheath and original box.

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 6.69" inch / 170 mm
Total length: 11.81” inch / 300 mm
Handle length: 5.12” inch / 130 mm
Handle: Anodized T6-6082 black anodized

Blade thickness: 5 mm
Overall weight 205 gr.

Additional Information:

Blade Coating: Physical Vapor Deposition (PVD)

Leather Sheath: Included

PVD
(Physical Vapor Deposition) is a variety of vacuum deposition methods used to deposit thin films by the condensation of a vaporized form of the desired film material onto various workpiece surface. The coating method involves purely physical process such as high temperature vacuum evaporation with subsequent condensation.

FOX Fairbairn Sykes FX-592 WAF Dagger

- Made by Fox Knives in Italy -

Design by: "Hill Knives".

Introduction:

Hill Knives:

“Dutch Commando Dagger is Based on the original Fairbairn Sykes design. It is a collector’s knife to honor the special forces of the world.”

The Dutch Knifemaking company Hill Knives was founded in 1979 by Frans van den Heuvel † (father) and Albert van den Heuvel (son), who both have a technical background as toolmakers. “What makes Hill Knives extraordinary is our passion and drive to create the ultimate quality and design when it comes to our knives".

With leather sheath and original box.

Specifications:

Steel: N690Co stainless steel HRC 58-60 
Blade length: 6.69" inch / 170 mm
Total length: 11.81” inch / 300 mm
Handle length: 5.12” inch / 130 mm
Handle: Anodized T6-6082 black anodized

Blade thickness: 5 mm
Overall weight 205 gr.

Additional Information:

Blade Coating: Physical Vapor Deposition (PVD)

Leather Sheath: Included

PVD
(Physical Vapor Deposition) is a variety of vacuum deposition methods used to deposit thin films by the condensation of a vaporized form of the desired film material onto various workpiece surface. The coating method involves purely physical process such as high temperature vacuum evaporation with subsequent condensation.

FOX FKMD Sputnik 10 FX-810 B Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

Introduction:

The new series Sputnik especially shines with particularly high use value and an extremely secure grip. The rubbery Forprene handle the Sputnik models are to handle even when wet or cold very comfortable and safe, including the numerous depressions and grooves to play their part. The small built-in guard also carries an eyelet as the glass breaker in the grip end, whereby the Sputnik example can be tied also to a stick. The blade of N690Co is Cerakote-coated and optimally dimensioned with thickness from 5mm to combine cutting potential and stability. The highly functional symmetrical sheath is made of fiberglass and is located in a MOLLE compatible nylon holder with belt loop and detachable leg straps.

- Glass breaker tempered stainless steel 420 -

Developed in collaboration with: MEMOTEK

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 4.72" inch / 120 mm
Total length: 9.65” inch / 245 mm
Handle length: 4.92” inch / 125 mm
Handle scales: TPR black

Blade thickness: 5 mm
Overall weight 215 gr.

Additional Information:

Blade Coating: Cerakote™ black

Sheath: Included with MOLLE system

Handle: Anodized aluminum cap and wrench key included

Cerakote™
It Is a ceramic based finish that can be applied to metals, enhance a number of physical performance properties including abrasion/wear resistance, corrosion resistance, chemical resistance, impact strength and hardness.

FOX FKMD Sputnik 13 FX-813 BG Military Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

* Please request availability *

Introduction:

The new series Sputnik especially shines with particularly high use value and an extremely secure grip. The rubbery Forprene handle the Sputnik models are to handle even when wet or cold very comfortable and safe, including the numerous depressions and grooves to play their part. The small built-in guard also carries an eyelet as the glass breaker in the grip end, whereby the Sputnik example can be tied also to a stick. The blade of N690Co is Cerakote-coated and optimally dimensioned with thickness from 5mm to combine cutting potential and stability. The highly functional symmetrical sheath is made of fiberglass and is located in a MOLLE compatible nylon holder with belt loop and detachable leg straps.

- Glass breaker tempered stainless steel 420 -

Developed in collaboration with: MEMOTEK

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 6.02" inch / 153 mm
Total length: 11.02” inch / 280 mm
Handle length: 5.00” inch / 127 mm
Handle scales: TPR green

Blade thickness: 5 mm
Overall weight 245 gr.

Additional Information:

Blade Coating: Cerakote™ black

Sheath: Included with MOLLE system

Handle: Anodized aluminum cap and wrench key included

Cerakote™
It Is a ceramic based finish that can be applied to metals, enhance a number of physical performance properties including abrasion/wear resistance, corrosion resistance, chemical resistance, impact strength and hardness.