4 products
Boker Sherman EDC Knife
Regular price €349,00 EUR Sale price €329,00 EUR Save €20,00 EURGerman Böker "Sherman EDC" Folding Knife
- Made in Solingen / Germany -
Introduction:
The great success of the Boker M4 Sherman Damascus, which is due not only to the history of the historic Damascus steel but also to the design of the modern folder, has prompted us to use this as the basis for a leading and pleasing EDC with a Titanium framelock, which, despite the powder metallurgy of the blade, also carries a genuine piece of M4 Sherman Damascus.
For the blade of the Sherman EDC we have used Magnacut for the first time, which is not without reason being celebrated as a "miracle steel". Unlike the tool steels usually used, this steel was developed specifically for knife making. The three desirable properties of a steel - edge retention, toughness and rust resistance (stainless in the DIN category) - represent a conflict of goals. To make the steel rust-resistant, the addition of chromium is necessary, which makes the structure coarse, brittle and susceptible to fracture under normal conditions. High hardness, which has a positive influence on cutting durability, is usually achieved at the expense of toughness. With Magnacut, despite the high Chromium content of 10.7% and an impressive hardenability of over 62-63 HRC, it has been possible to achieve a very fine microstructure and thus high toughness and shock-load tolerance. The addition of nitrogen plays a central role here. Nitrogen is actually a steel pest in the alloy. However, due to sophisticated heat treatment, among other things, the nitrogen of the Magnacut is integrated into the crystalline lattice structure of the steel structure and thus achieves the otherwise contradictory material properties.
The central structural difference to the M4 Damascus model is the flipper, elegantly integrated into the contours, which allows the blade to slide open smoothly with a small impulse and invites you to play. The ball-bearing blade is opened alternatively by thumb stud and locked by a sturdy Titanium Framelock with stonewash finish. An overdrive stop acts as an over-extension protection for the lock. The milled titanium clip (tip-up/r) with a steel ball as well as the handle scales made of wild Carbon Fibre complete the harmonious overall picture.
A special highlight of the Boker Sherman EDC is the protruding backspacer made of Damascus, which is equipped with a lanyard hole in elongated slotted design. The Damascus of the backspacer was forged from various materials from the production of M4 Sherman tanks by Chad Nichols in the Customized Ladder pattern and is reminiscent of the tank tracks left in the ground by the heavy chains of the M4 Sherman.
Specifications:
Steel: MAGNACUT
Blade length: 2.952“ inch / 75 mm
Total length: 7.007” inch / 178 mm
Handle length: 4.055" inch / 103 mm
Handle scales: Carbon / Steel
Blade Thickness: 3,6 mm
Overall weight 95 gr.
Fallkniven P3Gcfc Carbon Fiber Folding Pocket Knife
Regular price €259,00 EUR Save €-259,00 EURFallkniven P3Gcfc Carbon Fiber Folding Pocket Knife
- Made by Fällkniven -
Introduction:
A lot has happened behind the scenes around this folding knife, but the aim has always been the same – to produce a folding knife with a sensible size and attractive design. Since we have sold folding knives for a long time we wanted to use that experience and make a knife that was practical, attractive and reliable. The P folder was born. From start with a blade in solid VG10, nowadays with a blade in laminated powder steel, our famous 3G stainless steel. The P folder is easy to clean since the back of the handle is open, something that makes it very suitable for hunting purposes. All models come with a black cordura sheath, which attaches to the belt.
In general, a folding knife can never be as strong as a sheath knife, and since it is the result of several hundred different work operations, it must of course be more expensive to manufacture. On the other hand it is a handy format and acceptable in many situations.Inspired by the world famous knifemaker R.W. Loveless, mod. P is a symbiosis between advanced technology, genuine handicraft and timeless design – a knife for the modern hunter. Today available with a handle in desert ironwood or hi-tech carbon fiber. Cordura sheath included.
Please note:
There can be some variation in pattern and shades on the wooden handles.
Specifications:
Steel: 3G HRC 62
Blade length: 3.03" inch / 77 mm
Total length: 7.09” inch / 180 mm
Handle length: 4.06” inch / 103 mm
Handle scales: Carbon Fiber
Blade thickness: 3 mm
Knife weight 75 gr.
Additional Information:
Edge: Flat Ground
Sheath Included: Cordura
Locking: Liner Lock
Fallkniven P3Gic Folding Pocket Knife
Regular price €249,00 EUR Sale price €209,00 EUR Save €40,00 EURFallkniven P3Gic Folding Pocket Knife
- Made by Fällkniven -
Introduction:
A lot has happened behind the scenes around this folding knife, but the aim has always been the same – to produce a folding knife with a sensible size and attractive design. Since we have sold folding knives for a long time we wanted to use that experience and make a knife that was practical, attractive and reliable. The P folder was born. From start with a blade in solid VG10, nowadays with a blade in laminated powder steel, our famous 3G stainless steel. The P folder is easy to clean since the back of the handle is open, something that makes it very suitable for hunting purposes. All models come with a black cordura sheath, which attaches to the belt. In general, a folding knife can never be as strong as a sheath knife, and since it is the result of several hundred different work operations, it must of course be more expensive to manufacture. On the other hand it is a handy format and acceptable in many situations. Inspired by the world famous knifemaker R.W. Loveless, mod. P is a symbiosis between advanced technology, genuine handicraft and timeless design – a knife for the modern hunter. Today available with a handle in desert ironwood or hi-tech carbon fiber. Cordura sheath included.
Please note:
There can be some variation in pattern and shades on the wooden handles.
Specifications:
Steel: 3G HRC 62
Blade length: 3.03" inch / 77 mm
Total length: 7.09” inch / 180 mm
Handle length: 4.06” inch / 103 mm
Handle scales: Desert Ironwood
Blade thickness: 3 mm
Knife weight 75 gr.
Additional Information:
Edge: Flat Ground
Sheath Included: Cordura
Locking: Liner Lock
PUMA Falknersheil II. Falconer Knife
Regular price €379,00 EUR Sale price €329,00 EUR Save €50,00 EURGerman PUMA Falknersheil II. Falconer Knife
- Made in Solingen / Germany -
Introduction:
This is a very fine knife for Falconers. The fixed blade falconry knife from PUMA can be used for all work during the hunt. It is extremely handy, the black micarta handle scales are attached with brass rivets. The front and top jaws are also made of brass. We deliver the falknersheil II including a high quality leather sheath.
The falknersheil was developed with the help of several experienced falconers and especially by Horst Niesters in the early 1970s. The blade is designed to chop up food for the birds and to bag the game catched by the falcon. There is a small "blunt" notch in the middle of the cutting edge. It should signal to the falconer that the cutting edge is sharpened from the tip of the blade to this notch. The rest of the blade is blunt to protect the birds of prey.
"With this knife, the PUMA-Werk has developed a falconer's knife from practical experience for practical use. As a professional falconer, I tried it out on the hunt for a wide variety of game species and during daily work in the bird of prey station. With precise requirements and appropriate suggestions for changes I contribute significantly to the design.
The PUMA-FALKNERSHEIL meets all requirements of the practical hunt and falconry business. I wish all falconers joy and good health while running the PUMA FALKNERSHEIL. "
In memory of: Horst Niesters / head of the bird of prey station in the Hellenthal game reserve
Specifications:
Steel: 440C / 55-57 HRC
Blade length: 3.819” inch / 97 mm
Total length: 7.874” inch / 200 mm
Handle length: 4.055” inch / 103 mm
Handle scales: Black Micarta
Blade thickness: 3 mm
Overall weight 108 gr.
Additional Information:
– Leather Sheath Included
– Hand guard
– Brass Bolster