121mm - 130mm

German Böker Integral 2.0 Full Tang Knife

- Made in Solingen / Germany -

We from Dream-Knives offer this beautiful hunting knife in 4 different versions.

- Please choose your desired version yourself in the selection menu above -

Introduction:

For many years now, the Boker Full-Tang has been a fixture in our product line, and is also a icon among Boker hunting knives. The rugged construction of the knife is based on a single steel blank forging, while the outstanding ergonomics of the clever handle scale design have been enthusiastically accepted by legions of hunters. We have now optimized the Full-Tang in several areas. The handle as whole and the surfaces on the parrying element and pommel are more rounded to optimize handling and also to further enhance the elegant visual appeal. In addition, the handle scales are precision-milled to minimize manufacturing tolerances, thus improving component fit and ergonomics to the maximum achievable level. The blade grind was converted from the previous hollow grind to a flat grind to increase strength. As before, the trusted 440C is used as the blade steel. Shipped with leather sheath. Available in 4 different variants.

Specifications:

Steel: 440C stainless steel
Blade length: 4.645“ inch / 118 mm
Total length: 9.448” inch / 240 mm
Handle length: 4.803” inch / 122 mm
Handle scales: Micarta / Stag Horn / Grenadill Wood / Rose Wood

Blade Thickness: 4.90 mm
Overall weight 240 gr.

Sheath: Leather

Böker Solingen Classic Western Bowie N690 Knife

- Made in Solingen / Germany -

Introduction:

The design of the traditional Boker Bowie was based on original drafts from the early 19th century and equipped with an extremely stable, 6.4 mm thick blade made from N690. The name of the knife goes back to James "Jim" Bowie, the famous pioneer and soldier who is revered as a hero of the Wild West. Contrary to the widely copied Sheffield Bowie, the variations of this outdoor knife resemble the early American Bowie with its s-shaped stainless steel crossguard sporting a finely satinized surface. The exquisite scales of domestic oak lend the Boker Bowie even more authenticity. Comes with a high-quality Western leather sheath in black, design based on the original.

Specifications:

Steel: N690
Blade length: 7.795“ inch / 198 mm
Total length: 12.795” inch / 325 mm
Handle length: 5" inch / 127 mm
Handle scales: Oak Wood

Blade Thickness: 6.4 mm
Overall weight 495 gr.

N690:

The cobalt-alloyed N690 by Böhler (not to be confused with the lower-grade N695!) is a very reliable upper middle-grade steel we use at our Solingen manufacture for a wide variety of projects.

German Böker G.E.K. German Expedition Knife

- Made in Solingen / Germany -

Introduction:

This modern classic is a full-size survival knife whose versatility helps it to tackle any situation one might come across in the wild. From building a shelter to hunting uses and intercepting or skinning game, or even preparing meals, the Boker German Expedition Knife leaves nothing to be desired. The versatile blade shape is based on the experience of Tony Lennartz, while the G.E.K. has also gained wide appeal by practitioners as a highly versatile tool. This exceedingly rugged design uses N690 as the blade steel, which provides an excellent foundation with its grain structure and good corrosion resistance The rugged stonewash finish combines an easy to care for finish with an attractive visual appeal.

The handle design of the G.E.K. was enhanced in an effort to perfect the ergonomics for the various grip positions. The perforated design of the handle ensures moderate weight, while the exchangeable G10 handle scales provide optimum grip and extremely secure handling. The impact element on the pommel increases the range of uses. The left-handed or right-handed carry premium black leather sheath is designed for Lennartz' favorite carrying option - the cross draw. The knife is positioned diagonally on the belt and can be deployed or stowed away with ease. The knife is secured with a two-sided push-button closure.

Specifications:

Steel: N690 stainless steel
Blade length: 6.496“ inch / 165 mm 
Total length: 11.338” inch / 288 mm
Handle length: 4.842” inch / 123 mm
Handle scales: G10

Blade Thickness: 5 mm
Overall weight 258 gr.

Sheath: Leather

Fallkniven A1pro Pilot Survival Knife

- Made by Fällkniven -

Introduction:

There are basic survival knives, and there are survival knives for the professional. Our original models of the F1, S1 and A1 have provided exceptional service for more than 20 years. And due to their outstanding quality and durability they will continue to perform for many more years. Nevertheless our drive to continually improve our knives has led us to develop the new Pro Series. The Pro Series are survival knives of near-unimaginable quality, durability and performance. Compared to their predecessors, the Pro series of F1, S1 and A1 differs in the following important areas:

1. The original laminated VG10 steel is upgraded to a laminate cobalt steel (lam. CoS) blade that ensures a durable edge and improved edge retention.
2. The blades are thicker increasing the torsional rigidity so the knives will withstand even greater external forces.
3. The full-length tapered tang is wider and thicker and therefore significantly stronger.
4. The crossguard is now made of stainless steel and permanently welded to the tang.
5. The convex blade edge has been refined to improve its cutting properties.
6. The zytel sheaths are redesigned, more durable, and better suited for the Molle attachment system.

Understandably these knives fall into a higher price category. However, considering the unparalleled quality they are by no means over priced. A professional survival knife must perform in all weather with no exceptions. The professional survival knife must be comfortable and safe to handle for both fine and rough work in summer heat and winter cold. We at Fallkniven have considered every design aspect of these superb professional survival knives and we stand behind them with a lifetime warranty on materials and workmanship.

Steel: Laminated CoS HRC 60
Blade length: 6.30" inch / 160 mm
Total length: 11.14” inch / 283 mm
Handle length: 4.84” inch / 123 mm
Handle scales: Thermorun

Blade thickness: 7 mm
Knife weight 363 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Finger Guard: Stainless Steel

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven A1x Military Survival Knife

- Made by Fällkniven -

Introduction:

Your X-knife is the strongest, sharpest and safest stainless steel knife in production. If your life is in danger, you can always rely on your X-knife. It is designed to withstand all the stresses applied by the human hand, which means that it is virtually indestructible. It assumes, however, that you are careful with the knife and that it is used  as intended, namely as a sharp precision tool.

The basis of the X-knife’s strength lies in the laminated cobalt steel, and also in the well-thought-out construction in which break zones have been eliminated. Together with the hand-shaped convex edge, the X-knife is a concept that beats everything else in the world in terms of safety and comfort.

In their usual way, they have put a lot of energy into designing a safe knife sheath, which is actually where the knife will spend most of its time. The design of the sheath determines the access to the knife, and here they have really put all their efforts in order to get a safe sheath that allows easy access to the knife. The sheath has both a transport lock (the folding bracket with a strap) and a working safety detail that allows the knife to be in place until you decide to use it. It is a bit a belt-and-braces approach, but we like putting safety first – a lost knife is of no use. The transport lock will therefore allow the knife to be fastened tip-up or tip-down on the body or on your equipment without any risk.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 6.34" inch / 161 mm
Total length: 11.18” inch / 284 mm
Handle length: 4.84” inch / 123 mm
Handle scales: Thermorun

Blade thickness: 7 mm
Knife weight 401 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Full Tang

Blade: Satin Finish

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven A1xb Tungsten Carbide Knife

- Made by Fällkniven -

Introduction:

Your X-knife is the strongest, sharpest and safest stainless steel knife in production. If your life is in danger, you can always rely on your X-knife. It is designed to withstand all the stresses applied by the human hand, which means that it is virtually indestructible. It assumes, however, that you are careful with the knife and that it is used  as intended, namely as a sharp precision tool. The basis of the X-knife’s strength lies in the laminated cobalt steel, and also in the well-thought-out construction in which break zones have been eliminated. Together with the hand-shaped convex edge, the X-knife is a concept that beats everything else in the world in terms of safety and comfort. About the all-black version: This surface is the hardest we have ever encountered. Although we really tried to wear down the black coating with the toughest, driest curly birch we could find, we never succeeded in getting holes in this extremely hard, durable surface. Still, we cannot guarantee that it will stay for time and eternity, after all, the blade can be ground and certainly a diamond or ceramic stone will bite on the surface. Also for example a grain of sand can scratch or leave a mark in the coating. The hardness is at 2400 HV (Vickers) or around HRC 83.

In their usual way, they have put a lot of energy into designing a safe knife sheath, which is actually where the knife will spend most of its time. The design of the sheath determines the access to the knife, and here they have really put all their efforts in order to get a safe sheath that allows easy access to the knife. The sheath has both a transport lock (the folding bracket with a strap) and a working safety detail that allows the knife to be in place until you decide to use it. It is a bit a belt-and-braces approach, but we like putting safety first – a lost knife is of no use. The transport lock will therefore allow the knife to be fastened tip-up or tip-down on the body or on your equipment without any risk.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 6.34" inch / 161 mm
Total length: 11.18” inch / 284 mm
Handle length: 4.84” inch / 123 mm
Handle scales: Thermorun

Blade thickness: 7 mm
Knife weight 401 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Full Tang

Blade: Tungsten Carbide

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven A1xbclip Survival Knife

- Made by Fällkniven -

Introduction:

Your X-knife is the strongest, sharpest and safest stainless steel knife in production. If your life is in danger, you can always rely on your X-knife. It is designed to withstand all the stresses applied by the human hand, which means that it is virtually indestructible. It assumes, however, that you are careful with the knife and that it is used  as intended, namely as a sharp precision tool.

The basis of the X-knife’s strength lies in the laminated cobalt steel, and also in the well-thought-out construction in which break zones have been eliminated. Together with the hand-shaped convex edge, the X-knife is a concept that beats everything else in the world in terms of safety and comfort.

In their usual way, they have put a lot of energy into designing a safe knife sheath, which is actually where the knife will spend most of its time. The design of the sheath determines the access to the knife, and here they have really put all their efforts in order to get a safe sheath that allows easy access to the knife. The sheath has both a transport lock (the folding bracket with a strap) and a working safety detail that allows the knife to be in place until you decide to use it. It is a bit a belt-and-braces approach, but we like putting safety first – a lost knife is of no use. The transport lock will therefore allow the knife to be fastened tip-up or tip-down on the body or on your equipment without any risk.

This knife sheath has a stainless clip that allows you to easily carry the knife on your waist belt. The advantages are several – including that you can easily remove and stow your knife. When belt-mounted, the knife will hang vertically, a few centimeters lower than the belt, allowing it to be accessed even if wearing a backpack or long jacket. The articulation in this sheath system allows the wearer to move the knife and sheath to one side when seated or driving a vehicle.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 6.34" inch / 161 mm
Total length: 11.18” inch / 284 mm
Handle length: 4.84” inch / 123 mm
Handle scales: Thermorun

Blade thickness: 7 mm
Knife weight 401 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Full Tang

Blade: Satin Finish

Laminated CoS: A newly developed high alloy cobalt-special steel

Muela GRAN DUQUE-25E Hunting Knife

- Handcrafted by Muela in Spain –

Introduction:

The Muela "Gran Duque" Hunting Knife, is a very good companion on hunt. Muela used the finest materials for this beautiful hunting knife. This awesome hunting comes with high quality leather sheath. Guard & Pommel made of polished brass. This is a true GIANT and unbreakble.

Specifications:

Steel: Mova 1.4116 (X50CrMoV15) Rockwell HRC 54°-58°
Blade length: 9.842 inch / 250 mm
Total length: 14.960” inch /  380 mm
Handle length: 5.118” inch / 130 mm
Handle: Staghorn.

Knife weight: 690 gr.

Blade thickness: 5.0 mm

Additional informations about the steel quality:

“MOVA” 1.4116 (X50CrMoV15). It´s a classic steel in our Knives and folding Knives. An excellent combination of Molybdenum and Vanadium that is highly stain resistant, though and corrosión resistant.

Muela Podenquero-GJ Hunting Dagger Knife

- Handcrafted by Muela in Spain -

Introduction:

This is a very sturdy & beautiful hunting dagger knife. A high-quality leather sheath and a nice storage box belongs to this awesome knife. The stag horn handle shows a beautiful lion motif.

Steel quality informations about that superb luxury collectors knife:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Specifications:

Steel: 1.4116 = “MOVA”  (X50CrMoV15)
Blade length: 10.236” inch / 260mm
Total length: 15.748” inch /  400 mm
Handle length: 5.511” inch / 140 mm
Handle: Stag

Blade thickness: 4.2 mm

Knife Weight: 650 gr.

Muela Podenquero-GV Hunting Dagger Knife

- Handcrafted by Muela in Spain -

Introduction:

This is a very sturdy & beautiful hunting dagger knife. A high-quality leather sheath and a nice storage box belongs to this awesome knife.

Steel quality informations about that superb luxury collectors knife:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Specifications:

Steel: 1.4116 = “MOVA”  (X50CrMoV15)
Blade length: 10.236” inch / 260mm
Total length: 15.748” inch /  400 mm
Handle length: 5.511” inch / 140 mm
Handle: Stag

Blade thickness: 4.2 mm

Knife Weight: 650 gr.

PUMA IP Boar Catcher II. with Stag Handle

- Double edge blade -

- Handcrafted under German Puma Supervision in Spain -

- For sale only to persons over 18 years -

Introduction:

The Puma "Boar Catcher II." is a double edged Pig-Sticker. This boar catcher is perfect for wild boar hunting.

Specifications:

PUMA IP Boar Catcher III. with Stag Handle

- Double edge blade -

- Handcrafted under German Puma Supervision in Spain -

- For sale only to persons over 18 years -

Introduction:

The Puma "Boar Catcher III." is a double edged Pig-Sticker. This boar catcher is perfect for wild boar hunting.

Specifications:

PUMA IP Boar Catcher with Stag Handle

- Double edge blade -

- Handcrafted under German Puma Supervision in Spain -

- For sale only to persons over 18 years -

Introduction:

The Puma "Boar Catcher" is a double edged Pig-Sticker. This boar catcher is perfect for wild boar hunting.

Specifications:

German PUMA Phoenix Bowie Hunting Knife

- Made in Solingen / Germany -

Pre Order available:

Date of delivery Dec. 20th 2024

Introduction:

The original Bowie knife from Puma is equipped with ergonomically shaped, attractive pakkawood shells. The 1.4116 stainless steel blade has a Bowie shape, which is suitable for many purposes.

Specifications:

Steel: 1.4116 / 55-57 HRC, forged
Blade length: 7.874” inch / 200 mm
Total length: 12.874” inch / 327 mm
Handle length: 5.000” inch / 127 mm
Handle scales: Pakka Wood
Blade thickness: 7 mm
Overall weight 403 gr.

Additional Information:

– Leather Sheath Included

– Strap Eye for the sheath

– Hand guard

– Aluminum Bolster

– PUMA design

German PUMA Rotwildmesser Hunting Stag Knife

- Made in Solingen / Germany -

Pre-Order available:

Available at Nov. 30th 2024

Introduction:

With the ROTWILDMESSER PUMA has not skimped on the material. The extraordinarily stable blade was designed for tough applications. It is made of the proven 1.4110 steel and has a back thickness of 4 mm! Solid nickel silver fittings act as a parrying element, neatly joined by scales made of selected stag horn material. A hand-sewn sheath made of the best saddle leather allows for easy transport of the 380 g knife. The exceptionally strong blade was designed for tough use. Solid nickel silver fittings act as a guard.

Specifications:

Steel: 440A / 55-57 HRC
Blade length: 5.118” inch / 130 mm
Total length: 10.236” inch / 260 mm
Handle length: 5.118” inch / 130 mm
Handle scales: stag horn
Blade thickness: 4 mm
Overall weight 380 gr.

Additional Information:

– Leather Sheath Included

– PUMA Design

German PUMA Wildtöter Hunting Collectors Knife

- Made in Solingen / Germany -

Introduction:

The Puma "Wildtöter" is a super elegant hunting knife, which is characterized by its beauty, but also by its robustness.

Specifications:

Steel: 1.4116 / 55-57 HRC
Blade length: 6.299” inch / 160 mm
Total length: 11.417” inch / 290 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Black Pakka Wood
Blade thickness: 3.5 mm
Overall weight 264 gr.

Additional Information:

– Leather Sheath Included

– Hand guard

– Nickel Silver Bolster