121mm - 130mm

German Böker Integral 2.0 Full Tang Knife

- Made in Solingen / Germany -

We from Dream-Knives offer this beautiful hunting knife in 4 different versions.

- Please choose your desired version yourself in the selection menu above -

Introduction:

For many years now, the Boker Full-Tang has been a fixture in our product line, and is also a icon among Boker hunting knives. The rugged construction of the knife is based on a single steel blank forging, while the outstanding ergonomics of the clever handle scale design have been enthusiastically accepted by legions of hunters. We have now optimized the Full-Tang in several areas. The handle as whole and the surfaces on the parrying element and pommel are more rounded to optimize handling and also to further enhance the elegant visual appeal. In addition, the handle scales are precision-milled to minimize manufacturing tolerances, thus improving component fit and ergonomics to the maximum achievable level. The blade grind was converted from the previous hollow grind to a flat grind to increase strength. As before, the trusted 440C is used as the blade steel. Shipped with leather sheath. Available in 4 different variants.

Specifications:

Steel: 440C stainless steel
Blade length: 4.645“ inch / 118 mm
Total length: 9.448” inch / 240 mm
Handle length: 4.803” inch / 122 mm
Handle scales: Micarta / Stag Horn / Grenadill Wood / Rose Wood

Blade Thickness: 4.90 mm
Overall weight 240 gr.

Sheath: Leather

Böker Solingen Classic Western Bowie N690 Knife

- Made in Solingen / Germany -

Introduction:

The design of the traditional Boker Bowie was based on original drafts from the early 19th century and equipped with an extremely stable, 6.4 mm thick blade made from N690. The name of the knife goes back to James "Jim" Bowie, the famous pioneer and soldier who is revered as a hero of the Wild West. Contrary to the widely copied Sheffield Bowie, the variations of this outdoor knife resemble the early American Bowie with its s-shaped stainless steel crossguard sporting a finely satinized surface. The exquisite scales of domestic oak lend the Boker Bowie even more authenticity. Comes with a high-quality Western leather sheath in black, design based on the original.

Specifications:

Steel: N690
Blade length: 7.795“ inch / 198 mm
Total length: 12.795” inch / 325 mm
Handle length: 5" inch / 127 mm
Handle scales: Oak Wood

Blade Thickness: 6.4 mm
Overall weight 495 gr.

N690:

The cobalt-alloyed N690 by Böhler (not to be confused with the lower-grade N695!) is a very reliable upper middle-grade steel we use at our Solingen manufacture for a wide variety of projects.

Additional informations about Mr. W.C. Davis:

The Knife Maker Mr. W.C. Davis, who unfortunately passed away in 2015 at the age of 71 years, was known mainly for his extraordinary Drop-Point Pocketknives. The American designed and manufactured handmade Hunting and Outdoor Knives, using only the finest materials and taking care of every detail. Growing up in the mountains of Arkansas, he discovered his passion for hunting and fishing early. That’s how he learned already in his young years the worth of a good knife.

German Böker G.E.K. German Expedition Knife

- Made in Solingen / Germany -

Introduction:

This modern classic is a full-size survival knife whose versatility helps it to tackle any situation one might come across in the wild. From building a shelter to hunting uses and intercepting or skinning game, or even preparing meals, the Boker German Expedition Knife leaves nothing to be desired. The versatile blade shape is based on the experience of Tony Lennartz, while the G.E.K. has also gained wide appeal by practitioners as a highly versatile tool. This exceedingly rugged design uses N690 as the blade steel, which provides an excellent foundation with its grain structure and good corrosion resistance The rugged stonewash finish combines an easy to care for finish with an attractive visual appeal.

The handle design of the G.E.K. was enhanced in an effort to perfect the ergonomics for the various grip positions. The perforated design of the handle ensures moderate weight, while the exchangeable G10 handle scales provide optimum grip and extremely secure handling. The impact element on the pommel increases the range of uses. The left-handed or right-handed carry premium black leather sheath is designed for Lennartz' favorite carrying option - the cross draw. The knife is positioned diagonally on the belt and can be deployed or stowed away with ease. The knife is secured with a two-sided push-button closure.

Specifications:

Steel: N690 stainless steel
Blade length: 6.496“ inch / 165 mm 
Total length: 11.338” inch / 288 mm
Handle length: 4.842” inch / 123 mm
Handle scales: G10

Blade Thickness: 5 mm
Overall weight 258 gr.

Sheath: Leather

German Böker Tirpitz 42 Damascus Folding Knife

Collectors knife *Limited Edition*

- Made in Solingen / Germany -

Introduction:

A piece of history comes to life! The Tirpitz, sister ship of the legendary Bismarck, was the largest battleship ever launched for the German Navy. After the commissioning in February 1941, the Tirpitz soon became a permanent threat for the Western Allies Navy in the Northern Atlantic. History tells of many attempts to destroy this mighty weapon-loaded colossus. After the Tirpitz was heavily damaged by air attacks from the British Royal Air Force in September 1944, the ship was placed stationary at the Norwegian coast at Tromsö. Once again, the Tirpitz was the primary target for heavy attacks of the Royal Air Force. Then, on November 12. 1944, the Tirpitz was hit by special "Tallboy bombs", which caused the ship to roll over in the shallow water.

Shortly after WW II, a Norwegian specialized company began to explore the wreck and to obtain the high alloy steel for further civil use. Scientists were very interested in this material as it was used in research and development of measurement technology and even in the astronautics industry. Especially for Boker, Norwegian divers have now retrieved parts of the special armor of the Tirpitz from the Fjord. These pieces of living history are being exclusively forged by our Damascus forger to an extraordinary Damascus Steel with an exciting background. The pattern "Great Pyramids", with more than 300 layers, adorns the mighty 4" blade and makes this piece the highlight of any collection. The combination of the Tirpitz steel and carbon tool steels also creates an extremely rugged Damascus steelwhich has a hardness of 61 to 63 HRC and can handle any cutting task with ease. The handle, made of high strength AlMgSi1 Aluminum(with Silicium, making it a much higher quality than standard AlMg3), is hardcoat anodized and provides a firm and secure grip. The reversible clip allows for tip-up or tip-down carry. For the handle inlay we chose domestic walnut, which has a long history as shaft wood for German rifles due to its superior characteristics. This eye-catching inlay also features the original Tirpitz crest. This knife combines history, tradition and modern technology in a more than unique way. Comes complete in a presentation box with a certificate of authenticity and is serial numbered.

Specifications:

Steel: Damascus
Blade length: 3.897“ inch / 99 mm
Total length: 9.015” inch / 229 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Aluminum / Walnut Wood

Blade thickness: 3.5 mm
Overall weight 167 gr.

Note: We from Dream-Knives have no influence on which serial number we receive from Böker.

German Böker Tirpitz Damascus Pocket Knife

Collectors knife *Serial numbered*

- Made in Solingen / Germany -

Introduction:

A piece of history comes to life! The Tirpitz, sister ship of the legendary Bismarck, was the largest battleship ever launched for the German Navy. After the commissioning in February 1941, the Tirpitz soon became a permanent threat for the Western Allies? Navy in the Northern Atlantic. History tells of many attempts to destroy this mighty weapon-loaded colossus. After the Tirpitz was heavily damaged by air attacks from the British Royal Air Force in September 1944, the ship was placed stationary at the Norwegian coast at Tromsö. Once again, the Tirpitz was the primary target for heavy attacks of the Royal Air Force. Then, on November 12. 1944, the Tirpitz was hit by special "Tallboy bombs", which caused the ship to roll over in the shallow water.

Shortly after WW II, a Norwegian specialized company began to explore the wreck and to obtain the high alloy steelfor further civil use. Scientists were very interested in this material as it was used in research and development of measurement technology and even in the astronautics industry. Especially for Boker, Norwegian divers have now retrieved parts of the special armor of the Tirpitz from the Fjord. These pieces of living history are being exclusively forged by our Damascus forger to an extraordinary Damascus Steel with an exciting background. The pattern "Great Pyramids", with more than 300 layers, adorns the mighty 4" blade and makes this piece the highlight of any collection. The combination of the Tirpitz steel and carbon tool steels also creates an extremely rugged Damascus Steelwhich has a hardness of 61 to 63 HRC and can handle any cutting task with ease. The handle, made of high strength AlMgSi1 Aluminum (with Silicium, making it a much higher quality than standard AlMg3), is hardcoat anodized and provides a firm and secure grip. The reversible clip allows for tip-up or tip-down carry. For the handle inlay we chose domestic walnut, which has a long history as shaft wood for German rifles due to its superior characteristics. This eye-catching inlay also features the original Tirpitz crest. This knife combines history, tradition and modern technology in a more than unique way. Comes complete in a presentation box with a certificate of authenticity and is serial numbered.

Specifications:

Steel: Damascus
Blade length: 3.897“ inch / 99 mm
Total length: 9.015” inch / 229 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Aluminum / Walnut Wood

Blade thickness: 3.5 mm
Overall weight 167 gr.

Cudeman 107-C Bowie Hunting Stag Knife

- Made by Cudeman in Spain -

Cudeman Hunting Bowie Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Mova 1.4116 X50CrMoV15 / Rockwell 54/56 HRC
Blade length: 7.874” inch / 200 mm
Total length: 12.992” inch /  330 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Polished Deer
Blade thickness: 5 mm
Knife weight 406 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 113 gr.

– Fixation of the Handle: Oval-Head Rivets

– Blade shape: Bowie

– Grind: Hollow Grind

– Finger Guard: 420 Polished Stainless Steel

– Blade Finish: Satin Finish

– Hole for Safety Cord

Cudeman 107-M Bowie Hunting Knife

- Made by Cudeman in Spain -

Cudeman Hunting Bowie Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Mova 1.4116 X50CrMoV15 / Rockwell 54/56 HRC
Blade length: 7.874” inch / 200 mm
Total length: 12.992” inch /  330 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Black Micarta with Detailed Red Line
Blade thickness: 5 mm
Knife weight 434 gr.

Additional Information:

– Black Leather Sheath included

– Sheath Weight: 113 gr

– Fixation of the Handle: Oval-Head Rivets

– Blade shape: Bowie

– Grind: Hollow Grind

– Finger Guard: 420 Polished Stainless Steel

– Blade Finish: Satin Finish

– Hole for Safety Cord

Cudeman 107-R Bowie Hunting Knife

- Made by Cudeman in Spain -

Cudeman Hunting Bowie Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Mova 1.4116 X50CrMoV15 / Rockwell 54/56 HRC
Blade length: 7.874” inch / 200 mm
Total length: 12.992” inch /  330 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Polished Red Stamina
Blade thickness: 5 mm
Knife weight 406 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 113 gr.

– Fixation of the Handle: Oval-Head Rivets

– Blade shape: Bowie

– Grind: Hollow Grind

– Finger Guard: 420 Polished Stainless Steel

– Blade Finish: Satin Finish

– Hole for Safety Cord

Cudeman 113-C Hunting Stag Dagger Knife

- Made by Cudeman in Spain -

Cudeman DAGGER with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Mova 1.4116 X50CrMoV15 / Rockwell 54/56 HRC
Blade length: 9.449” inch / 240 mm
Total length: 14.567” inch / 370 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Polished Deer
Blade thickness: 5 mm
Knife weight 360 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 122 gr.

– Fixation of the Handle: Oval-Head Rivets

– Blade shape: Dagger

– Grind: Hollow Grind

– Finger Guard: 420 Polished Stainless Steel

– Blade Finish: Polished Finish

– Fuller on the Blade

Cudeman 113-L Hunting Dagger

- Made by Cudeman in Spain -

Cudeman DAGGER Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Mova 1.4116 X50CrMoV15 / Rockwell 54/56 HRC
Blade length: 9.449” inch / 240 mm
Total length: 14.567” inch / 370 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Satin Olive Tree Wood
Blade thickness: 5 mm
Knife weight 360 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 122 gr

– Fixation of the Handle: Oval-Head Rivets

– Blade shape: Dagger

– Grind: Hollow Grind

– Finger Guard: 420 Polished Stainless Steel

– Blade Finish: Polished Finish

– Fuller on the Blade

Cudeman 133-H Skinner Gut Hook Hunting Knife

- Made by Cudeman in Spain -

Cudeman Skinner Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 3.543” inch / 90 mm
Total length: 8.465” inch /  215 mm
Handle length: 4.921” inch / 125 mm
Handle scales: Black Rubber
Blade thickness: 4 mm
Knife weight 161 gr.

Additional Information:

– Black Leather Sheath included

– Sheath Weight: 71 gr.

– Fixation of the Handle: Oval-Head Rivets

– Blade Shape: Skinner

– Grind: Hollow Grind

– Blade Finish: Satin Finish

– Hole for Safety Cord

Cudeman 151-H Hunting Knife

- Made by Cudeman in Spain -

Cudeman Hunting Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Molybdenum Steel 54/56 HRC
Blade length: 4.3319” inch / 110 mm
Total length: 9.252” inch /  235 mm
Handle length: 4.921” inch / 125 mm
Handle scales: Black Rubber Handle
Blade thickness: 4 mm
Knife weight 223 gr.

Additional Information:

– Black Leather Sheath included

– Sheath Weight: 82 gr.

– Blade shape: Nesmuk

– Grind: Hollow Grind

– Blade Finish: Satin Finish

– Hole for Safety Cord

Cudeman 155-M or 155-MC Entresierras Bushcraft Hunting Knife

- Made by Cudeman in Spain -

Cudeman Hunting Knife with MOVA blade.

There are two Editions: Standard or Special.

The Special Edition has a luxury sheath with extras.

- Please select your desired version in the selection menu above -

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 6.230” inch / 160 mm
Total length: 11.417” inch / 290 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Black Micarta with Detailed Red Line
Blade thickness: 5 mm
Overall weight 420 gr.

Description:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Clip-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

Standard Edition Sheath Version:

– Black Leather Multi-position Sheath

– Hole for a Safety Cord

– Glass-Breaker

– Sheath weight: 146 gr.

Special Edition Sheath Version:

– Black Leather Multi Position Sheath

– Sheath Weight 304 gr.

– Glass-Breaker

– Hole for a Safety Cord

– Paracord 280 cm

– Firesteel

– Sharpening Stone with Signal Mirror, Ruler (12cm), Compas and Sundial

Cudeman 155-X / 155-XC Entresierras Bushcraft Hunting Knife

- Made by Cudeman in Spain -

Cudeman Hunting Knife with MOVA blade.

There are two Editions: Standard or Special.

The Special Edition has a luxury sheath with extras.

- Please select your desired version in the selection menu above -

Specifications:

Steel: Molybdenum Vanadium 54/56 HRC
Blade length: 6.230” inch / 160 mm
Total length: 11.417” inch / 290 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Brown Micarta with Detailed Red Line
Blade thickness: 5 mm
Overall weight 420 gr.

Description:

All versions.

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Clip-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

Standard Edition Sheath Version:

– Brown Leather Multi-position Sheath

– Hole for a Safety Cord

– Glass-Breaker

– Sheath weight: 146 gr.

Special Edition Sheath Version:

– Brown Leather Multi Position Sheath

– Sheath Weight 304 gr.

– Glass-Breaker

– Hole for a Safety Cord

– Paracord 280 cm

– Firesteel

– Sharpening Stone with Signal Mirror, Ruler (12cm), Compas and Sundial

Cudeman 160-F / 160-FC Quercus BS-9 Bushcraft Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman Bushcraft Knife with MOVA blade. This is a serial numbered knife edition. There are two Editions: Standard or Special. The Special Edition has a luxury sheath with extras.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: Molybdenum Vanadium 56/58 HRC
Blade length: 4.921” inch / 125 mm
Total length: 9.843” inch / 250 mm
Handle length: 4.921” inch / 125 mm
Handle scales: Olive Green with Detailed Red Line
Blade thickness: 4.5 mm
Net weight 227 gr.

Additional Information:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Drop-Point

– Grind: Folded Flat

Standard Edition Sheath:

– Hole for a Safety Cord

– Multi-Positioning Sheath

– Pusher in the Handle to make Fire by Friction

– Grind for Finger Thumb

– Hammer

– Brown Leather Sheath

– Sheath weight: 112 gr.

Special Edition Sheath:

– Brown Leather Sheath

– Hole for a Safety Cord

– Multi-Position Sheath

– Paracord 280 cm

– Firesteel

– Pusher in the Handle to make Fire by Friction

– Hammer

– Leather Loop with Accessories

– Sharpening Stone with Signal Mirror, Ruler (12cm), Compas and Sundial

– Sheath Weight 264 gr.

Cudeman 160-M or 160-MC Quercus BS-9 Bushcraft Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman Bushcraft Knife with MOVA blade. This is a serial numbered knife edition. There are two Editions: Standard or Special. The Special Edition has a luxury sheath with extras.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: Molybdenum Vanadium 56/58 HRC
Blade length: 4.921” inch / 125 mm
Total length: 9.843” inch / 250 mm
Handle length: 4.921” inch / 125 mm
Handle scales: Black Micarta with Detailed Red Line
Blade thickness: 4.5 mm
Net weight 227 gr.

Additional Information:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Drop-Point

– Grind: Folded Flat

Standard Edition Sheath:

– Hole for a Safety Cord

– Multi-Positioning Sheath

– Pusher in the Handle to make Fire by Friction

– Grind for Finger Thumb

– Hammer

– Black Leather Sheath

– Sheath weight: 112 gr.

Special Edition Sheath:

– Black Leather Sheath

– Hole for a Safety Cord

– Multi-Position Sheath

– Paracord 280 cm

– Firesteel

– Pusher in the Handle to make Fire by Friction

– Hammer

– Leather Loop with Accessories

– Sharpening Stone with Signal Mirror, Ruler (12cm), Compas and Sundial

– Sheath Weight 264 gr.

Cudeman 291-M or 291-MC BV-Cadete Bushcraft Hunting Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman Tactical Knife with Böhler blade. There are two Editions: Standard or Special. The Special Edition has a luxury sheath with extras.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: BÖHLER N-695 59/61 HRC
Blade length: 5.906” inch / 150 mm
Total length: 10.827” inch / 275 mm
Handle length: 4.921” inch / 125 mm
Handle scales: Black Micarta with Detailed Red Line
Blade Width: 5 mm
Net weight 346 gr.

Description:

All versions.

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Clip-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

Standard Edition Sheath Version:

– Black Leather

– Hole for a Safety Cord

– Sheath weight: 119 gr.

– Glass-Breaker

– Wire-Breaker

– Jumping on the Spine

– Bullet Opener

Special Edition Sheath Version:

– Black Leather

– Hole for a Safety Cord

– Sheath weight: 266 gr.

– Glass-Breaker

– Wire-Breaker

– Jumping on the Spine

– Bullet Opener

– Paracord 280 cm

– Leather Loop with Accessories

– Sharpening Stone, Signalling Mirror, Ruler (12 cm), Compass and Sundial

Cudeman 291-N or 291-NC or 291-N-K BV Cadete Bushcraft Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman Tactical Knife with Böhler blade.

There are three Editions, Standard, Special or KYDEX.

The Special Edition has a luxury sheath with extras..

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: BÖHLER N-695 59/61 HRC
Blade length: 5.906” inch / 150 mm
Total length: 10.827” inch / 275 mm
Handle length: 4.921” inch / 125 mm
Handle scales: Black Micarta Coated with Detailed Red Line
Blade Width: 5 mm
Net weight 346 gr.

Description:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Clip-Point

– Grind: Hollow Grind

– Blade Finish: Satin Finish

Standard Edition Sheath Version:

– Black Leather

– Hole for a Safety Cord

– Sheath weight: 119 gr.

– Glass-Breaker

– Wire-Breaker

– Jumping on the Spine

– Bullet Opener

Special Edition Sheath Version:

– Black Leather

– Hole for a Safety Cord

– Sheath weight: 266 gr.

– Glass-Breaker

– Wire-Breaker

– Jumping on the Spine

– Bullet Opener

– Paracord 280 cm

– Leather Loop with Accessories

– Sharpening Stone, Signalling Mirror, Ruler (12 cm), Compass and Sundial

KYDEX Edition Sheath Version:

– Hole for a Safety Cord

– Glass-Breaker

– Wire-Breaker

– Jumping on the Spine

– Bullet Opener

Cudeman 298-K or 298-KC FAB Survival Hunting Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman Survival Knife with Böhler blade.

There are two Editions available: Standard Edition or Special Edition.

The Special Edition has a luxury sheath with extras.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: BÖHLER N-695 59/61 HRC 
Blade length: 4.331” inch / 110 mm
Total length: 9.252" inch / 235 mm
Handle length: 4.921” inch /  125 mm
Handle scales: Cocobolo Wood

Bolsters : Nickel silver
Blade thickness: 0.210” inch / 5.33 mm
Net weight 254 gr.

Standard leather sheath included.

Description:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Drop-Point

– Grind: Full Flat Grind

Standard Edition Sheath:

– Hole for a Safety Cord

– Sheath weight : 188 gr.

Special Edition Sheath:

– Hole for a Safety Cord

– Multi-Position Sheath

– Paracord 280 cm

– Firesteel

– Leather Loop with Accessories

– Sharpening Stone with Signal Mirror, Ruler (12cm), Compas and Sundial

– Sheath Weight 286 gr.

Cudeman 298-KP "Collectors"- Hunting Knife

*Limited Edition of 300 pieces*

- Made by Cudeman in Spain -

Introduction:

Cudeman Survival Knife with Böhler blade.

The serial number is always different.

Specifications:

Steel: BÖHLER N-695 59/61 HRC 
Blade length: 4.331” inch / 110 mm
Total length: 9.252" inch / 235 mm
Handle length: 4.921” inch /  125 mm
Handle scales: Polished Cocobolo Wood

Net weight 254 gr.

Leather sheath included.

Description:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Drop-Point

– Grind: Full Flat Grind

– Hole for a Safety Cord

– Sheath weight : 188 gr.

Cudeman 298-M or 298-MC FAB Survival Hunting Knife

- Made by Cudeman in Spain -

Introduction:

Cudeman Survival Knife with Böhler blade.

There are two Editions available: Standard Edition or Special Edition.

The Special Edition has a luxury sheath with extras.

- Please select your desired version from the drop-down menu above -

Specifications:

Steel: BÖHLER N-695 59/61 HRC 
Blade length: 4.331” inch / 110 mm
Total length: 9.252" inch / 235 mm
Handle length: 4.921” inch /  125 mm
Handle scales: Black Micarta with a Detailed Red Line

Bolsters : Nickel silver
Blade thickness: 0.210” inch / 5.33 mm
Net weight 254 gr.

Standard leather sheath included.

Description:

– Fixation of the Handle: Allen Stainless Steel Screws

– Blade shape: Drop-Point

– Grind: Full Flat Grind

Standard Edition Sheath:

– Hole for a Safety Cord

– Sheath weight: 188 gr.

Special Edition Sheath:

– Hole for a Safety Cord

– Multi-Position Sheath

– Paracord 280 cm

– Firesteel

– Leather Loop with Accessories

– Sharpening Stone with Signal Mirror, Ruler (12cm), Compas and Sundial

– Sheath Weight 286 gr.

Fallkniven A1pro Pilot Survival Knife

- Made by Fällkniven -

Introduction:

There are basic survival knives, and there are survival knives for the professional. Our original models of the F1, S1 and A1 have provided exceptional service for more than 20 years. And due to their outstanding quality and durability they will continue to perform for many more years. Nevertheless our drive to continually improve our knives has led us to develop the new Pro Series. The Pro Series are survival knives of near-unimaginable quality, durability and performance. Compared to their predecessors, the Pro series of F1, S1 and A1 differs in the following important areas:

1. The original laminated VG10 steel is upgraded to a laminate cobalt steel (lam. CoS) blade that ensures a durable edge and improved edge retention.
2. The blades are thicker increasing the torsional rigidity so the knives will withstand even greater external forces.
3. The full-length tapered tang is wider and thicker and therefore significantly stronger.
4. The crossguard is now made of stainless steel and permanently welded to the tang.
5. The convex blade edge has been refined to improve its cutting properties.
6. The zytel sheaths are redesigned, more durable, and better suited for the Molle attachment system.

Understandably these knives fall into a higher price category. However, considering the unparalleled quality they are by no means over priced. A professional survival knife must perform in all weather with no exceptions. The professional survival knife must be comfortable and safe to handle for both fine and rough work in summer heat and winter cold. We at Fallkniven have considered every design aspect of these superb professional survival knives and we stand behind them with a lifetime warranty on materials and workmanship.

Steel: Laminated CoS HRC 60
Blade length: 6.30" inch / 160 mm
Total length: 11.14” inch / 283 mm
Handle length: 4.84” inch / 123 mm
Handle scales: Thermorun

Blade thickness: 7 mm
Knife weight 363 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Protruding Broad Tang

Finger Guard: Stainless Steel

Laminated CoS: A newly developed high alloy cobalt-special steel

Fallkniven A1x Military Survival Knife

- Made by Fällkniven -

Introduction:

Your X-knife is the strongest, sharpest and safest stainless steel knife in production. If your life is in danger, you can always rely on your X-knife. It is designed to withstand all the stresses applied by the human hand, which means that it is virtually indestructible. It assumes, however, that you are careful with the knife and that it is used  as intended, namely as a sharp precision tool.

The basis of the X-knife’s strength lies in the laminated cobalt steel, and also in the well-thought-out construction in which break zones have been eliminated. Together with the hand-shaped convex edge, the X-knife is a concept that beats everything else in the world in terms of safety and comfort.

In their usual way, they have put a lot of energy into designing a safe knife sheath, which is actually where the knife will spend most of its time. The design of the sheath determines the access to the knife, and here they have really put all their efforts in order to get a safe sheath that allows easy access to the knife. The sheath has both a transport lock (the folding bracket with a strap) and a working safety detail that allows the knife to be in place until you decide to use it. It is a bit a belt-and-braces approach, but we like putting safety first – a lost knife is of no use. The transport lock will therefore allow the knife to be fastened tip-up or tip-down on the body or on your equipment without any risk.

Specifications:

Steel: Laminated CoS HRC 60
Blade length: 6.34" inch / 161 mm
Total length: 11.18” inch / 284 mm
Handle length: 4.84” inch / 123 mm
Handle scales: Thermorun

Blade thickness: 7 mm
Knife weight 401 gr.

Additional Information:

Edge: Convex

Sheath Included: Zytel

Handle: Lanyard Hole

Tang: Full Tang

Blade: Satin Finish

Laminated CoS: A newly developed high alloy cobalt-special steel