Regular price
€485,00 EURSale price€399,00 EUR
Save €86,00 EUR
/
Tax included.
Fallkniven A1xb Tungsten Carbide Knife
- Made by Fällkniven -
Introduction:
Your X-knife is the strongest, sharpest and safest stainless steel knife in production. If your life is in danger, you can always rely on your X-knife. It is designed to withstand all the stresses applied by the human hand, which means that it is virtually indestructible. It assumes, however, that you are careful with the knife and that it is used as intended, namely as a sharp precision tool. The basis of the X-knife’s strength lies in the laminated cobalt steel, and also in the well-thought-out construction in which break zones have been eliminated. Together with the hand-shaped convex edge, the X-knife is a concept that beats everything else in the world in terms of safety and comfort. About the all-black version: This surface is the hardest we have ever encountered. Although we really tried to wear down the black coating with the toughest, driest curly birch we could find, we never succeeded in getting holes in this extremely hard, durable surface. Still, we cannot guarantee that it will stay for time and eternity, after all, the blade can be ground and certainly a diamond or ceramic stone will bite on the surface. Also for example a grain of sand can scratch or leave a mark in the coating. The hardness is at 2400 HV (Vickers) or around HRC 83.
In their usual way, they have put a lot of energy into designing a safe knife sheath, which is actually where the knife will spend most of its time. The design of the sheath determines the access to the knife, and here they have really put all their efforts in order to get a safe sheath that allows easy access to the knife. The sheath has both a transport lock (the folding bracket with a strap) and a working safety detail that allows the knife to be in place until you decide to use it. It is a bit a belt-and-braces approach, but we like putting safety first – a lost knife is of no use. The transport lock will therefore allow the knife to be fastened tip-up or tip-down on the body or on your equipment without any risk.
Specifications:
Steel: Laminated CoS HRC 60 Blade length: 6.34" inch / 161 mm Total length: 11.18” inch / 284 mm Handle length: 4.84” inch / 123 mm Handle scales: Thermorun
Blade thickness: 7 mm Knife weight 401 gr.
Additional Information:
Edge: Convex
Sheath Included: Zytel
Handle: Lanyard Hole
Tang: Full Tang
Blade: Tungsten Carbide
Laminated CoS: A newly developed high alloy cobalt-special steel
The new series Sputnik especially shines with particularly high use value and an extremely secure grip. The rubbery Forprene handle the Sputnik models are to handle even when wet or cold very comfortable and safe, including the numerous depressions and grooves to play their part. The small built-in guard also carries an eyelet as the glass breaker in the grip end, whereby the Sputnik example can be tied also to a stick. The blade of N690Co is Cerakote-coated and optimally dimensioned with thickness from 5mm to combine cutting potential and stability. The highly functional symmetrical sheath is made of fiberglass and is located in a MOLLE compatible nylon holder with belt loop and detachable leg straps.
- Glass breaker tempered stainless steel 420 -
Developed in collaboration with: MEMOTEK
Specifications:
Steel: N690-Co stainless steel HRC 58-60 Blade length: 4.72" inch / 120 mm Total length: 9.65” inch / 245 mm Handle length: 4.92” inch / 125 mm Handle scales: TPR black
Blade thickness: 5 mm Overall weight 215 gr.
Additional Information:
Blade Coating: Cerakote™ black
Sheath:Included with MOLLE system
Handle:Anodized aluminum cap and wrench key included
Cerakote™ It Is a ceramic based finish that can be applied to metals, enhance a number of physical performance properties including abrasion/wear resistance, corrosion resistance, chemical resistance, impact strength and hardness.
The new series Sputnik especially shines with particularly high use value and an extremely secure grip. The rubbery Forprene handle the Sputnik models are to handle even when wet or cold very comfortable and safe, including the numerous depressions and grooves to play their part. The small built-in guard also carries an eyelet as the glass breaker in the grip end, whereby the Sputnik example can be tied also to a stick. The blade of N690Co is Cerakote-coated and optimally dimensioned with thickness from 5mm to combine cutting potential and stability. The highly functional symmetrical sheath is made of fiberglass and is located in a MOLLE compatible nylon holder with belt loop and detachable leg straps.
- Glass breaker tempered stainless steel 420 -
Developed in collaboration with: MEMOTEK
Specifications:
Steel: N690-Co stainless steel HRC 58-60 Blade length: 6.02" inch / 153 mm Total length: 11.02” inch / 280 mm Handle length: 5.00” inch / 127 mm Handle scales: TPR green
Blade thickness: 5 mm Overall weight 245 gr.
Additional Information:
Blade Coating: Cerakote™ black
Sheath:Included with MOLLE system
Handle:Anodized aluminum cap and wrench key included
Cerakote™ It Is a ceramic based finish that can be applied to metals, enhance a number of physical performance properties including abrasion/wear resistance, corrosion resistance, chemical resistance, impact strength and hardness.
Regular price
€299,00 EURSale price€269,00 EUR
Save €30,00 EUR
/
Tax included.
FOX FKMD Oplita FX-017116 Military Knife
- Made by Fox Knives in Italy -
Design by: "FOX Knives".
Introduction:
Sheath NYLON 1000D with MOLLE system and FRN (NYLON reinforced fiberglass) plate with wire cutting plate and sharpening stone.
Specifications:
Steel: N690-Co stainless steel HRC 58-60 Blade length: 7.28" inch / 185 mm Total length: 12.20” inch / 310 mm Handle length: 4.92” inch / 125 mm Handle scales: Coyote tan Kraton G
Blade thickness: 5 mm Overall weight 285 gr.
Additional Information:
Blade Coating: Coyote tan Idroglider
Blade: Partially Serrated Blade
Blade: Wire Cutting Plate
Sheath: NYLON 1000D with MOLLE system and FRN ®(NYLON reinforced fiberglass) with stainless steel wire cutting plate and sharpening stone
Idroglider Special non stick coating made of PTFE that ensures long life and rust resistance.
Regular price
€299,00 EURSale price€269,00 EUR
Save €30,00 EUR
/
Tax included.
FOX Oplita FX-0171117 Military Knife
- Made by Fox Knives in Italy -
Design by: "FOX Knives".
Introduction:
Sheath NYLON 1000D with MOLLE system and FRN (NYLON reinforced fiberglass) plate with wire cutting plate and sharpening stone.
Specifications:
Steel: N690-Co stainless steel HRC 58-60 Blade length: 7.28" inch / 185 mm Total length: 12.20” inch / 310 mm Handle length: 4.92” inch / 125 mm Handle scales: Black Kraton G
Blade thickness: 5 mm Overall weight 285 gr.
Additional Information:
Blade Coating: Black Idroglider
Blade: Partially Serrated Blade
Blade: Wire Cutting Plate
Sheath: NYLON 1000D with MOLLE system and FRN ®(NYLON reinforced fiberglass) with stainless steel wire cutting plate and sharpening stone
Idroglider Special non stick coating made of PTFE that ensures long life and rust resistance.
We have in our collection this a very sturdy Military knife from Fox-Knives. The knife has been specially designed for heavy use. A Full Tang knife, which leaves nothing to be desired in the outdoor area.
Specifications:
Steel: N690-Co stainless steel HRC 58-60 Blade length: 6.89" inch / 175 mm Total length: 12.01” inch / 305 mm Handle length: 5.12” inch / 130 mm Handle scales: FRN® black
We have in our collection this a very sturdy Military knife from Fox-Knives. The knife has been specially designed for heavy use. A Full Tang knife, which leaves nothing to be desired in the outdoor area.
Specifications:
Steel: N690-Co stainless steel HRC 58-60 Blade length: 6.89" inch / 175 mm Total length: 12.01” inch / 305 mm Handle length: 5.12” inch / 130 mm Handle scales: FRN® OD green
Blade thickness: 6 mm Overall weight 360 gr.
Additional Information:
Blade Coating: Black Idroglider
Leather Sheath:Included
Handle:Lanyard Hole
Idroglider:
Special nonstick coating made of PTFE that ensures long life and rust resistance.
Regular price
€129,00 EURSale price€95,00 EUR
Save €34,00 EUR
/
Tax included.
Muela Scorpion-18NM Combat Knife
- Handcrafted by Muela in Spain -
This is a ruggedly made tactical combat knife. The high Quality Desert Camo sheath is included & belongs to this impressive knife. Guard black "Zamak".
Blade length: 7.086” inch / 180 mm Total length: 12.204” inch / 310 mm Handle length: 5.118” inch / 130 mm Handle scales: Non Slip Rubber Blade thickness: 4 mm Knife weight 350 gr.
