121mm - 130mm

Böker Solingen Classic Western Bowie N690 Knife

- Made in Solingen / Germany -

Introduction:

The design of the traditional Boker Bowie was based on original drafts from the early 19th century and equipped with an extremely stable, 6.4 mm thick blade made from N690. The name of the knife goes back to James "Jim" Bowie, the famous pioneer and soldier who is revered as a hero of the Wild West. Contrary to the widely copied Sheffield Bowie, the variations of this outdoor knife resemble the early American Bowie with its s-shaped stainless steel crossguard sporting a finely satinized surface. The exquisite scales of domestic oak lend the Boker Bowie even more authenticity. Comes with a high-quality Western leather sheath in black, design based on the original.

Specifications:

Steel: N690
Blade length: 7.795“ inch / 198 mm
Total length: 12.795” inch / 325 mm
Handle length: 5" inch / 127 mm
Handle scales: Oak Wood

Blade Thickness: 6.4 mm
Overall weight 495 gr.

N690:

The cobalt-alloyed N690 by Böhler (not to be confused with the lower-grade N695!) is a very reliable upper middle-grade steel we use at our Solingen manufacture for a wide variety of projects.

Additional informations about Mr. W.C. Davis:

The Knife Maker Mr. W.C. Davis, who unfortunately passed away in 2015 at the age of 71 years, was known mainly for his extraordinary Drop-Point Pocketknives. The American designed and manufactured handmade Hunting and Outdoor Knives, using only the finest materials and taking care of every detail. Growing up in the mountains of Arkansas, he discovered his passion for hunting and fishing early. That’s how he learned already in his young years the worth of a good knife.

German Böker Tirpitz 42 Damascus Folding Knife

Collectors knife *Limited Edition*

- Made in Solingen / Germany -

Introduction:

A piece of history comes to life! The Tirpitz, sister ship of the legendary Bismarck, was the largest battleship ever launched for the German Navy. After the commissioning in February 1941, the Tirpitz soon became a permanent threat for the Western Allies Navy in the Northern Atlantic. History tells of many attempts to destroy this mighty weapon-loaded colossus. After the Tirpitz was heavily damaged by air attacks from the British Royal Air Force in September 1944, the ship was placed stationary at the Norwegian coast at Tromsö. Once again, the Tirpitz was the primary target for heavy attacks of the Royal Air Force. Then, on November 12. 1944, the Tirpitz was hit by special "Tallboy bombs", which caused the ship to roll over in the shallow water.

Shortly after WW II, a Norwegian specialized company began to explore the wreck and to obtain the high alloy steel for further civil use. Scientists were very interested in this material as it was used in research and development of measurement technology and even in the astronautics industry. Especially for Boker, Norwegian divers have now retrieved parts of the special armor of the Tirpitz from the Fjord. These pieces of living history are being exclusively forged by our Damascus forger to an extraordinary Damascus Steel with an exciting background. The pattern "Great Pyramids", with more than 300 layers, adorns the mighty 4" blade and makes this piece the highlight of any collection. The combination of the Tirpitz steel and carbon tool steels also creates an extremely rugged Damascus steelwhich has a hardness of 61 to 63 HRC and can handle any cutting task with ease. The handle, made of high strength AlMgSi1 Aluminum(with Silicium, making it a much higher quality than standard AlMg3), is hardcoat anodized and provides a firm and secure grip. The reversible clip allows for tip-up or tip-down carry. For the handle inlay we chose domestic walnut, which has a long history as shaft wood for German rifles due to its superior characteristics. This eye-catching inlay also features the original Tirpitz crest. This knife combines history, tradition and modern technology in a more than unique way. Comes complete in a presentation box with a certificate of authenticity and is serial numbered.

Specifications:

Steel: Damascus
Blade length: 3.897“ inch / 99 mm
Total length: 9.015” inch / 229 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Aluminum / Walnut Wood

Blade thickness: 3.5 mm
Overall weight 167 gr.

Note: We from Dream-Knives have no influence on which serial number we receive from Böker.

German Böker Tirpitz Damascus Pocket Knife

Collectors knife *Serial numbered*

- Made in Solingen / Germany -

Introduction:

A piece of history comes to life! The Tirpitz, sister ship of the legendary Bismarck, was the largest battleship ever launched for the German Navy. After the commissioning in February 1941, the Tirpitz soon became a permanent threat for the Western Allies? Navy in the Northern Atlantic. History tells of many attempts to destroy this mighty weapon-loaded colossus. After the Tirpitz was heavily damaged by air attacks from the British Royal Air Force in September 1944, the ship was placed stationary at the Norwegian coast at Tromsö. Once again, the Tirpitz was the primary target for heavy attacks of the Royal Air Force. Then, on November 12. 1944, the Tirpitz was hit by special "Tallboy bombs", which caused the ship to roll over in the shallow water.

Shortly after WW II, a Norwegian specialized company began to explore the wreck and to obtain the high alloy steelfor further civil use. Scientists were very interested in this material as it was used in research and development of measurement technology and even in the astronautics industry. Especially for Boker, Norwegian divers have now retrieved parts of the special armor of the Tirpitz from the Fjord. These pieces of living history are being exclusively forged by our Damascus forger to an extraordinary Damascus Steel with an exciting background. The pattern "Great Pyramids", with more than 300 layers, adorns the mighty 4" blade and makes this piece the highlight of any collection. The combination of the Tirpitz steel and carbon tool steels also creates an extremely rugged Damascus Steelwhich has a hardness of 61 to 63 HRC and can handle any cutting task with ease. The handle, made of high strength AlMgSi1 Aluminum (with Silicium, making it a much higher quality than standard AlMg3), is hardcoat anodized and provides a firm and secure grip. The reversible clip allows for tip-up or tip-down carry. For the handle inlay we chose domestic walnut, which has a long history as shaft wood for German rifles due to its superior characteristics. This eye-catching inlay also features the original Tirpitz crest. This knife combines history, tradition and modern technology in a more than unique way. Comes complete in a presentation box with a certificate of authenticity and is serial numbered.

Specifications:

Steel: Damascus
Blade length: 3.897“ inch / 99 mm
Total length: 9.015” inch / 229 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Aluminum / Walnut Wood

Blade thickness: 3.5 mm
Overall weight 167 gr.

Cudeman 107-C Bowie Hunting Stag Knife

- Made by Cudeman in Spain -

Cudeman Hunting Bowie Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Mova 1.4116 X50CrMoV15 / Rockwell 54/56 HRC
Blade length: 7.874” inch / 200 mm
Total length: 12.992” inch /  330 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Polished Deer
Blade thickness: 5 mm
Knife weight 406 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 113 gr.

– Fixation of the Handle: Oval-Head Rivets

– Blade shape: Bowie

– Grind: Hollow Grind

– Finger Guard: 420 Polished Stainless Steel

– Blade Finish: Satin Finish

– Hole for Safety Cord

Cudeman 107-R Bowie Hunting Knife

- Made by Cudeman in Spain -

Cudeman Hunting Bowie Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Mova 1.4116 X50CrMoV15 / Rockwell 54/56 HRC
Blade length: 7.874” inch / 200 mm
Total length: 12.992” inch /  330 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Polished Red Stamina
Blade thickness: 5 mm
Knife weight 406 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 113 gr.

– Fixation of the Handle: Oval-Head Rivets

– Blade shape: Bowie

– Grind: Hollow Grind

– Finger Guard: 420 Polished Stainless Steel

– Blade Finish: Satin Finish

– Hole for Safety Cord

Cudeman 113-C Hunting Stag Dagger Knife

- Made by Cudeman in Spain -

Cudeman DAGGER with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Mova 1.4116 X50CrMoV15 / Rockwell 54/56 HRC
Blade length: 9.449” inch / 240 mm
Total length: 14.567” inch / 370 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Polished Deer
Blade thickness: 5 mm
Knife weight 360 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 122 gr.

– Fixation of the Handle: Oval-Head Rivets

– Blade shape: Dagger

– Grind: Hollow Grind

– Finger Guard: 420 Polished Stainless Steel

– Blade Finish: Polished Finish

– Fuller on the Blade

Cudeman 113-L Hunting Dagger

- Made by Cudeman in Spain -

Cudeman DAGGER Knife with MOVA blade.

Leather Sheath included.

Specifications:

Steel: Mova 1.4116 X50CrMoV15 / Rockwell 54/56 HRC
Blade length: 9.449” inch / 240 mm
Total length: 14.567” inch / 370 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Satin Olive Tree Wood
Blade thickness: 5 mm
Knife weight 360 gr.

Additional Information:

– Brown Leather Sheath included

– Sheath Weight: 122 gr

– Fixation of the Handle: Oval-Head Rivets

– Blade shape: Dagger

– Grind: Hollow Grind

– Finger Guard: 420 Polished Stainless Steel

– Blade Finish: Polished Finish

– Fuller on the Blade

FOX FKMD Leonida FX-0171106 Military Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

Introduction:

Sheath NYLON 1000D with MOLLE system and FRN (NYLON reinforced fiberglass) plate with wire cutting plate and sharpening stone.

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 7.28" inch / 185 mm
Total length: 12.20” inch / 310 mm
Handle length: 4.92” inch / 125 mm
Handle scales: FORPRENE® OD green

Blade thickness: 5 mm
Overall weight 285 gr.

Additional Information:

Blade Coating: Black Idroglider  

Blade: Partially Serrated Blade with saw on the Spine

Blade: Wire Cutting Plate

Sheath: NYLON 1000D with MOLLE system and FRN ®(NYLON reinforced fiberglass)
with stainless steel wire cutting plate and sharpening stone

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.

FOX FKMD Leonida FX-0171107 Military Knife

- Made by Fox Knives in Italy -

Design by: "FOX Knives".

Introduction:

Sheath NYLON 1000D with MOLLE system and FRN (NYLON reinforced fiberglass) plate with wire cutting plate and sharpening stone.

Specifications:

Steel: N690-Co stainless steel HRC 58-60
Blade length: 7.28" inch / 185 mm
Total length: 12.20” inch / 310 mm
Handle length: 4.92” inch / 125 mm
Handle scales: FORPRENE® black

Blade thickness: 5 mm
Overall weight 285 gr.

Additional Information:

Blade Coating: Black Idroglider  

Blade: Partially Serrated Blade

Blade: Wire Cutting Plate

Sheath: NYLON 1000D with MOLLE system and FRN ®(NYLON reinforced fiberglass)
with stainless steel wire cutting plate and sharpening stone

Idroglider
Special non stick coating made of PTFE that ensures long life and rust resistance.

Muela African Big Five "Buffalo" Hunting Knife

 - Handcrafted in Spain by Muela -

Introduction:

Here we offer one of the African BIG FIVE models from Muela for sale. This is the model "Buffalo". All BIG FIVE models have a genuine stag handle and come with a beautiful Bowie blade. Only the butt caps differ according to the respective animal of the Big Five. Bolsters and guard are made of polished brass. Each BIG FIVE collectors knife, comes in a beautiful presentation box.

Specifications:

Steel: 1.4116 = “MOVA”  (X50CrMoV15)
Blade length: 6.299” inch / 160 mm
Total length: 11.417” inch /  290 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Staghorn
Knife weight: 271 gr.

Steel quality informations:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Muela African Big Five "Elephant" Hunting Knife

 - Handcrafted in Spain by Muela -

Introduction:

Here we offer one of the African BIG FIVE models from Muela for sale. This is the model "Elephant". All BIG FIVE models have a genuine stag handle and come with a beautiful Bowie blade. Only the butt caps differ according to the respective animal of the Big Five. Bolsters and guard are made of polished brass. Each BIG FIVE collectors knife, comes in a beautiful presentation box.

Specifications:

Steel: 1.4116 = “MOVA”  (X50CrMoV15)
Blade length: 6.299” inch / 160 mm
Total length: 11.417” inch /  290 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Staghorn
Knife weight: 273 gr.

Steel quality informations:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Muela African Big Five "Leopard" Hunting Knife

 - Handcrafted in Spain by Muela -

Introduction:

Here we offer one of the African BIG FIVE models from Muela for sale. This is the model "Leopard". All BIG FIVE models have a genuine stag handle and come with a beautiful Bowie blade. Only the butt caps differ according to the respective animal of the Big Five. Bolsters and guard are made of polished brass. Each BIG FIVE collectors knife, comes in a beautiful presentation box.

Specifications:

Steel: 1.4116 = “MOVA”  (X50CrMoV15)
Blade length: 6.299” inch / 160 mm
Total length: 11.417” inch /  290 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Staghorn
Knife weight: 253 gr.

Steel quality informations:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Muela African Big Five "Lion" Hunting Knife

 - Handcrafted in Spain by Muela -

Introduction:

Here we offer one of the African BIG FIVE models from Muela for sale. This is the model "Lion". All BIG FIVE models have a genuine stag handle and come with a beautiful Bowie blade. Only the butt caps differ according to the respective animal of the Big Five. Bolsters and guard are made of polished brass. Each BIG FIVE collectors knife, comes in a beautiful presentation box.

Specifications:

Steel: 1.4116 = “MOVA”  (X50CrMoV15)
Blade length: 6.299” inch / 160 mm
Total length: 11.417” inch /  290 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Staghorn
Knife weight: 262 gr.

Steel quality informations:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Muela African Big Five "Rhino" Hunting Knife

 - Handcrafted in Spain by Muela -

Introduction:

Here we offer one of the African BIG FIVE models from Muela for sale. This is the model "Rhino". All BIG FIVE models have a genuine stag handle and come with a beautiful Bowie blade. Only the butt caps differ according to the respective animal of the Big Five. Bolsters and guard are made of polished brass. Each BIG FIVE collectors knife, comes in a beautiful presentation box.

Specifications:

Steel: 1.4116 = “MOVA”  (X50CrMoV15)
Blade length: 6.299” inch / 160 mm
Total length: 11.417” inch /  290 mm
Handle length: 5.118” inch / 130 mm
Handle scales: Staghorn
Knife weight: 261 gr.

Steel quality informations:

“MOVA” 1.4116 (X50CrMoV15)

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Muela Agarre-24R Hunting Knife 

Introduction:

This is a very sturdy & beautiful hunting knife. A high-quality leather sheath belongs to this awesome knife.

It´s a classic steel and an excellent combination of Molybdenum and Vanadium that is highly stain resistant, though, and corrosión resistant.

Specifications:

Steel: 1.4116 = “MOVA”  (X50CrMoV15) - 57-58 HRC
Blade length: 7.480” inch / 245 mm
Total length: 12.007” inch /  373 mm
Handle length: 4.527” inch / 128 mm
Handle: Cocobolo Wood

Blade thickness: 4 mm

Knife Weight: 370 gr.

Muela CRUSADER-13M.N Bushcraft Knife

- Hand Made in Spain by Muela -

This is a very sturdy Muela Tactical knife has a blade made of 1.4116 (MOVA) stainless steel. The high grade steel quality has a Rockwell hardness of 57-58 HRC. The handle scales are made of beautiful Black Micarta. This beautiful tactical knife is decorated with red liners in the handle and the back of the blade has non-slip grooves. A great companion for hunting and tactical  activities. The blade has a special coating of PTFE (friction resistant). A very high-quality leather sheath also belongs to this sturdy knife.

Specifications:

Steel: 1.4116 = Mova - X50CrMoV15
Blade length: 4.921” inch / 125 mm
Total length: 9.842” inch /  250 mm
Handle length: 4.921” inch / 125 mm
Handle scales: Black Micarta Scales
Blade thickness: 4.5 mm
Knife weight 293 gr.

– Lanyard hole for Safety Cord

Additional informations about the steel quality:

“MOVA” 1.4116 (X50CrMoV15). It´s a classic steel in our Knives and folding Knives. An excellent combination of Molybdenum and Vanadium that is highly stain resistant, though and corrosión resistant.

Muela CRUSADER-13M.N/K Hunting Knife

- Hand Made in Spain by Muela -

This is a very sturdy Muela Tactical knife has a blade made of 1.4116 (MOVA) stainless steel. The high grade steel quality has a Rockwell hardness of 57-58 HRC. The handle scales are made of beautiful Black Micarta. This beautiful tactical knife is decorated with red liners in the handle and the back of the blade has non-slip grooves. A great companion for hunting and tactical  activities. The blade has a special coating of PTFE (friction resistant). A high-quality KYDEX sheath also belongs to this sturdy knife.

Specifications:

Steel: 1.4116 = Mova - X50CrMoV15
Blade length: 4.921” inch / 125 mm
Total length: 9.842” inch /  250 mm
Handle length: 4.921” inch / 125 mm
Handle scales: Black Micarta Scales
Blade thickness: 4.5 mm
Knife weight 293 gr.

– Lanyard hole for Safety Cord

Additional informations about the steel quality:

“MOVA” 1.4116 (X50CrMoV15). It´s a classic steel in our Knives and folding Knives. An excellent combination of Molybdenum and Vanadium that is highly stain resistant, though and corrosión resistant.

Muela EL GRAN DUQUE-25A Hunting Knife

- Handcrafted by Muela in Spain –

Introduction:

The Muela "El Gran Duque" Hunting Knife, is a very good companion on hunt. Muela used the finest materials for this beautiful hunting knife. This awesome hunting comes with high quality leather sheath. Guard & Pommel made of polished brass. This is a true GIANT and unbreakble.

Specifications:

Steel: Mova 1.4116 (X50CrMoV15) Rockwell HRC 56°-58°
Blade length: 9.842 inch / 250 mm
Total length: 14.960” inch /  380 mm
Handle length: 5.118” inch / 130 mm
Handle: Staghorn.

Knife weight: 945 gr. incl. leather sheath

Blade thickness: 5.0 mm

Additional informations about the steel quality:

“MOVA” 1.4116 (X50CrMoV15). It´s a classic steel in our Knives and folding Knives. An excellent combination of Molybdenum and Vanadium that is highly stain resistant, though and corrosión resistant.